• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][CM11.0][31/10/2014]Unofficial Cyanogenmod for n8010/n8013/n8000

Search This thread

lirokoa

Senior Member
Apr 14, 2012
466
2,320
Grenoble
github.com
Xiaomi Mi 10T Lite
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * Submitting bug reports on nightly builds is the leading 
 * cause of male impotence.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

STATUS:
  • This is a direct port of CM10.2 to CM11.0 for n8010 and n8013 version of Galaxy Note 10.1
  • Rom is built with CM11 development branch, so bugs are expected
  • All the source code is available on my Github.
  • I do this on my free time and unfortunately I don't have much.
  • Any help is a appreciated!

LINKS:

CURRENT VERSIONS:

-31/10/2014:
Changelog:
  • Switched back to proprietary camera HAL, seems more stable and better quality, waiting for feedback (clear camera apps data before using it)
  • Tried to fix video playback problem with KK bootloader, if it's working please go thanks marco9333, he did the job :)
  • Upstream CM changes

OLD VERSIONS:

-23/09/2014:

Source code: https://github.com/lirokoa

KNOWN BUGS:
  • Tablet reboot when dock is plugged

FAQ:
  • I can't flash CM11, an error occurs.
    You need to use a recovery that support KitKat ROM.
  • I can't flash CM11 on my n8010 tablet
    You need to remove the assertion (1rst line until ; ) in the META-INFcomgoogleandroidupdater-script
    Once this is done you won't need to do it anymore

CREDITS:
  • The whole Cyanogenmod team
  • All people who works on the Galaxy Note 10.1

XDA:DevDB Information
Unofficial Cyanogenmod for n8010/n8013/n8000, ROM for the Samsung Galaxy Note 10.1

Contributors
lirokoa
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x

Version Information
Status: Beta

Created 2014-06-10
Last Updated 2014-10-31

XDA:DevDB Information
Unofficial Cyanogenmod for n8010/n8013/n8000, ROM for the Samsung Galaxy Note 10.1

Contributors
lirokoa
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x

Version Information
Status: Beta

Created 2014-06-10
Last Updated 2014-10-31
 
Last edited:

jonjon68

Senior Member
Jan 4, 2011
243
31
Christ. You're really posting here without a ready rom image?

Nut up or stfu.

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * Submitting bug reports on nightly builds is the leading 
 * cause of male impotence.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

STATUS:
  • This is a direct port of CM10.2 to CM11.0 for n8010 and n8013 version of Galaxy Note 10.1
  • This is a work in progress. For now only source are available
  • All the source code is available on my Github.
  • I do this on my free time and unfortunately I don't have much.
  • Any help is a appreciated!
  • With current source rom boots and seems pretty functional. Still got some problems with camera.
  • I will upload once camera is ok.

LINKS:

CREDITS:
  • The whole Cyanogenmod team
  • All people who works on the Galaxy Note 10.1
 

pbaldw10

Senior Member
Nov 20, 2011
150
32
ROM is working great so far. Will continue to test today. I hope you can get the camera working.?

Sent from my GT-N8013 using xda app-developers app
 

iofthestorm

Senior Member
Nov 1, 2010
1,023
605
San Diego
Some news, I just added open source camera HAL. Camera seems to works good with 3rd party apps.
However camera apps from CM isnt present in the launcher. Will check later.

Hey man, just wanted to check in with you on a couple things. Which open source camera HAL patch are you using, the one from i9300 or sbrissen's one from i925 (VZW LTE Note 10.1), or a different one? When I tried the i925 version (with my Omni 4.4 builds) video was broken.

And if you want to just have camera fully working with little hassle you can use the proprietary blob camera, it's just that as per http://review.cyanogenmod.org/#/c/53945/ you need to add that flag to your BoardConfigCommon.mk like so: https://github.com/omnirom/android_...mmit/79fb4e40c5df84265c71cc4297cc3b4aa134d08d

Hope that helps!
 
  • Like
Reactions: ©h®is and Jiggs82

lirokoa

Senior Member
Apr 14, 2012
466
2,320
Grenoble
github.com
Xiaomi Mi 10T Lite
Originally Posted by lirokoa
Some news, I just added open source camera HAL. Camera seems to works good with 3rd party apps.
However camera apps from CM isnt present in the launcher. Will check later.

Hey man, just wanted to check in with you on a couple things. Which open source camera HAL patch are you using, the one from i9300 or sbrissen's one from i925 (VZW LTE Note 10.1), or a different one? When I tried the i925 version (with my Omni 4.4 builds) video was broken.

And if you want to just have camera fully working with little hassle you can use the proprietary blob camera, it's just that as per http://review.cyanogenmod.org/#/c/53945/ you need to add that flag to your BoardConfigCommon.mk like so: https://github.com/omnirom/android_...mmit/79fb4e40c5df84265c71cc4297cc3b4aa134d08d

Hope that helps!

Thanks for the hint, ill try with the proprietary blob. For your info, i think used the hal in the p4notelte device tree to see if result are better.

Sent from my GT-N8013 using xda app-developers app
 

claytonjn

Senior Member
Nov 3, 2011
1,561
836
claytonjamesphotography.webs.com
Hey, @lirokoa I posted this in the OmniROM thread too, but I'm experiencing the same behavior on your CM build. I'm hoping that between you and @iofthestorm some progress could be made with this.

I'm having an issue with my desktop dock where almost every time I dock the tablet it completely freezes and shuts down.

I made some videos of the behavior.
Here's a video of what happens with CM11: http://l.bitcasa.com/eXEHxYCL
Here's a video of what happens with OmniROM (same behavior): http://l.bitcasa.com/i9isN1nL
Just for comparison, here's a video of a TouchWiz ROM (to show no hardware defects): http://l.bitcasa.com/Ee3Z3Hw-

I also got a logcat here: http://l.bitcasa.com/JlDS2bOE

I used the -v long flags so there's a ton of stuff in it, but the last thing in the log is this:
Code:
[ 01-29 12:20:52.630  2236: 2236 I/DockObserver ]

Dock state changed: 1

Here's the dmesg: http://l.bitcasa.com/udQUdDZ-

It doesn't seem like a lot to go on really. Interestingly, the same behavior occurs whether the dock is plugged in to power or not. It occurs about 90% of the time when docked. I haven't been able to figure out a pattern or any reproducible method for when it does/doesn't occur. My hunch is that it's a kernel issue since it appears everything just stops functioning, the screen freezes, and after a few seconds it just turns off. If you can think of anything else I could do to try to troubleshoot let me know...

Thanks!
 

lirokoa

Senior Member
Apr 14, 2012
466
2,320
Grenoble
github.com
Xiaomi Mi 10T Lite
Hey, @lirokoa I posted this in the OmniROM thread too, but I'm experiencing the same behavior on your CM build. I'm hoping that between you and @iofthestorm some progress could be made with this.

I'm having an issue with my desktop dock where almost every time I dock the tablet it completely freezes and shuts down.

I made some videos of the behavior.
Here's a video of what happens with CM11: http://l.bitcasa.com/eXEHxYCL
Here's a video of what happens with OmniROM (same behavior): http://l.bitcasa.com/i9isN1nL
Just for comparison, here's a video of a TouchWiz ROM (to show no hardware defects): http://l.bitcasa.com/Ee3Z3Hw-

I also got a logcat here: http://l.bitcasa.com/JlDS2bOE

I used the -v long flags so there's a ton of stuff in it, but the last thing in the log is this:
Code:
[ 01-29 12:20:52.630  2236: 2236 I/DockObserver ]

Dock state changed: 1

Here's the dmesg: http://l.bitcasa.com/udQUdDZ-

It doesn't seem like a lot to go on really. Interestingly, the same behavior occurs whether the dock is plugged in to power or not. It occurs about 90% of the time when docked. I haven't been able to figure out a pattern or any reproducible method for when it does/doesn't occur. My hunch is that it's a kernel issue since it appears everything just stops functioning, the screen freezes, and after a few seconds it just turns off. If you can think of anything else I could do to try to troubleshoot let me know...

Thanks!

I can have a look but it may be difficult without having the hardware.
 
  • Like
Reactions: claytonjn

claytonjn

Senior Member
Nov 3, 2011
1,561
836
claytonjamesphotography.webs.com
I can have a look but it may be difficult without having the hardware.

It seems, on OmniROM at least, that changing the kernel settings made a huge difference. Raising the read-ahead buffer size made the freezes less frequent, but also changing governor made a huge difference. With read ahead buffer size at 4096 and governor set to Performance it hasn't frozen yet when put in the dock. I have a bunch of text the next few weeks, but then I've got a week off so I flash CM again and test.
 
  • Like
Reactions: ju9or and chappatti

lirokoa

Senior Member
Apr 14, 2012
466
2,320
Grenoble
github.com
Xiaomi Mi 10T Lite
It seems, on OmniROM at least, that changing the kernel settings made a huge difference. Raising the read-ahead buffer size made the freezes less frequent, but also changing governor made a huge difference. With read ahead buffer size at 4096 and governor set to Performance it hasn't frozen yet when put in the dock. I have a bunch of text the next few weeks, but then I've got a week off so I flash CM again and test.

Thanks for the hint, I will have look.

BTW new rom uploaded check 1st post.
 

manxexile

Senior Member
Feb 24, 2008
115
28
Market Harborough
Trebuchet Launcher

Just finished installing the ROM and it looks like Trebuchet has not been fixed - at least on my N801X.

Am unable to add any further Apps due to it's constant failure. Have re-installed ROM a couple of times without success. Pity as it's fast!

Any fixes?


Re-installed yet again and using Google+ launcher. All working fine now :)
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 42
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
    It can be used without any need to have any Google application installed.
    CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    STATUS:
    • This is a direct port of CM10.2 to CM11.0 for n8010 and n8013 version of Galaxy Note 10.1
    • Rom is built with CM11 development branch, so bugs are expected
    • All the source code is available on my Github.
    • I do this on my free time and unfortunately I don't have much.
    • Any help is a appreciated!

    LINKS:

    CURRENT VERSIONS:

    -31/10/2014:
    Changelog:
    • Switched back to proprietary camera HAL, seems more stable and better quality, waiting for feedback (clear camera apps data before using it)
    • Tried to fix video playback problem with KK bootloader, if it's working please go thanks marco9333, he did the job :)
    • Upstream CM changes

    OLD VERSIONS:

    -23/09/2014:

    Source code: https://github.com/lirokoa

    KNOWN BUGS:
    • Tablet reboot when dock is plugged

    FAQ:
    • I can't flash CM11, an error occurs.
      You need to use a recovery that support KitKat ROM.
    • I can't flash CM11 on my n8010 tablet
      You need to remove the assertion (1rst line until ; ) in the META-INFcomgoogleandroidupdater-script
      Once this is done you won't need to do it anymore

    CREDITS:
    • The whole Cyanogenmod team
    • All people who works on the Galaxy Note 10.1

    XDA:DevDB Information
    Unofficial Cyanogenmod for n8010/n8013/n8000, ROM for the Samsung Galaxy Note 10.1

    Contributors
    lirokoa
    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.0.x

    Version Information
    Status: Beta

    Created 2014-06-10
    Last Updated 2014-10-31

    XDA:DevDB Information
    Unofficial Cyanogenmod for n8010/n8013/n8000, ROM for the Samsung Galaxy Note 10.1

    Contributors
    lirokoa
    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.0.x

    Version Information
    Status: Beta

    Created 2014-06-10
    Last Updated 2014-10-31
    10
    Just uploaded new build for N8013.
    N8000 will follow soon.
    8
    Android 4.4.3 for N8013 is up.
    N8000 is building and will follow :)

    Edit: N8000 is up
    Enjoy!
    8
    [/COLOR]Here is the link to the new cm-11.0 4.4.4 but ONLY n8013/n8010.
    https://www.dropbox.com/s/e7ekqkcf1nazktr/cm-11-20140801-UNOFFICIAL-n8013.zip
    5
    hello

    any news about a resync from a cyanogenmod sources?

    Thanks!

    I'll try to upload a new build in the week :)