• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] CyanogenMod 11.0 - KitKat 4.4.4 - 08 November - UNOFFICIAL

Search This thread

johnnyslt

Inactive Recognized Developer
Sep 10, 2010
1,381
6,262
Bucharest
CyanogenMod 11.0 - KitKat 4.4.4 - Unofficial



e6eWNSX.jpg

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/

FEATURES:
  • Built from CM source
    [*]MiRaGe Kernel compiled from source ( 10x @mrg666 )
    [*]Kernel overclockable up to 1728 Mhz
    [*]ION & PMEM memory allocations!
    [*]Latest display drivers from CAF (msm-kk-1.27)
    [*]Kernel HW-VSYNC
    [*]ART runtime
    [*]Service
    [*]Text
    [*]Data
    [*]Calls
    [*]Audio
    [*]WiFi
    [*]Bluetooth
    [*]Google Now
    [*]GPS
    [*]MMS
    [*]VoIP
    [*]Qualcomm Mako libs & firmware
    [*]Video playback
    [*]Audio playback
    [*]Camera
    [*]Camcorder
    [*]USB OTG support, using powered USB OTG cable
    [*]Tethering ( WIFI, USB & BT)
    [*]VPN
    [*]Control over button backlight power ( Settings > Buttons > Backlight )
    [*]Change button backlight timeout ( Settings > Buttons > Backlight )
    [*]Control over haptic feedback power ( Settings > More options > Vibrator intensity )
    [*]Sweep2Wake




BUGS / NOT WORKING:


  • 3D recording not working

    [*]Ocazional data drops.

    [*]In-call volume sometimes gets reseted to maximum. Temporary fix:ENABLE TOUCH SOUNDS
    [*]Camcorder: When recording video, sometimes first video will not work, the second one should be OK.
    [*]Sending MMS's might not work for everybody (receiving works) !
    [*]Bluetooth tethering might not work from the first time



SCREENSHOTS:

1luuH.png
1luuU.png


1luuZ.png
1luv6.png


1luv8.png




RECOMANDATION:

  • Do not use superwipes
    [*]Required HBOOT : 1.49.xxxx
    [*]S-OFF
    [*]Radio/baseband : 11.77.3504.00P_11.25.3504.06_M get it from HERE
    [*]4ext recovery or Philz Touch Recovery HERE


If you have spontaneous reboots, check that you have the required radio version in BOOTLOADER not in SETTINGS -> ABOUT PHONE

Follow these exact steps to install the ROM :

If coming from an other ROM do this :

  • 1. Wipe data, cache, and system (wipe all partitions except sdcard if on 4ext recovery) if coming from any other ROM
  • 2. Flash ROM
  • 3. Flash GAPPS
  • 4. Reboot
  • 5. ???
  • 6. Profit

If coming from previous build of CM11.0 do this :

  • 1. Wipe cache and dalvik-cache
  • 2. Flash ROM
  • 3. Flash GAPPS
  • 4. Reboot
  • 5. ???
  • 6. Profit


  • To enable Developer Options and Performance go to Settings > About Phone and repeatedly press Build Number.
  • If you have a problem with ADB, update your android-sdk to latest version.
  • To enable Advanced reboot menu got Settings > Developer Options > check Advanced reboot




Thanks to:

  • Agrabren
    [*]Dastin1015
    [*]mrg666
    [*]Everyone who contributes to CM as this is based on their hard work!
    [*]Helicopter88
    [*]LaidbackNikez
    [*]android1234567(sultanxda)
    [*]sjoerd0301
    [*]Bigwillyg
    [*]Evervolv Team
    [*]GOO.IM TEAM




Issues tracker:

Please use this issues tracker HERE, if you want to help fixing bugs.
Logs are needed (logcat / dmesg / last_kmsg / screenshots), not just "got FC", "it's not working", "+1" or useless replies.


beer.gif

XDA:DevDB Information
CyanogenMod 11.0 - KitKat 4.4.4, ROM for the HTC EVO 3D

Contributors
johnnyslt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x

Version Information
Status: Stable

Created 2014-06-30
Last Updated 2014-11-08
 
Last edited:

johnnyslt

Inactive Recognized Developer
Sep 10, 2010
1,381
6,262
Bucharest
Downloads & Changelog

CHANGELOG & DOWNLOAD :

{ 08 November }

Cm updates from upstream (as of today at 12:00 PM ) : here

Kernel:


  • -

Rom:


  • -

Issues :

  • Hangouts calls doesn't work

DOWNLOAD : HERE


Older versions:



{ 19 August }

Cm updates from upstream (as of today at 12:00 PM ) : here

Kernel:


  • -

Rom:


  • Enabled SDCard eject

Issues :


DOWNLOAD : HERE MD5: 204577fa1193435141286aed116b57dc

MIRROR



{ 29 July }

Cm updates from upstream (as of last today at 12:00 PM ) : here

Kernel:


  • -

Rom:


  • Fix HD recoding resolution.

Issues :


DOWNLOAD : HERE MD5: bbedbe850c1d6c501847a79145c2204b

MIRROR


{ 10 July }

Cm updates from upstream (as of last night at 10:00 PM ) : here

Kernel:

  • Reverted battery changes
  • block: row: Fix crash when adding a new field in bio struct

Rom:


  • -

Issues :


DOWNLOAD : HERE MD5: 18129103018329b9063e7bf59ace607d

MIRROR
MIRROR
MIRROR

{ 01 July }

Cm updates from upstream (as of last today at 12:00 PM) : here

Kernel:

  • Avoid to create duplicate filename for misc devices.
  • msm: kgsl: Fix spinlock recursion in destroy pagetable
  • msm: kgsl: prevent kgsl_get_pagetable from returning a destroyed pt
  • msm: kgsl: Look up the process struct in process_mem_open()
  • msm: kgsl: hold a process_private refcount in process_mem_print
  • msm: kgsl: Fix GPUMMU mapping.
  • msm: kgsl: Cleanup the memory free list
  • kgsl: Sync with CAF kk_2.7-stable (sultanxda)
  • msm: htc_battery: Use fast (5 sec) timer while on battery power (sultanxda)
  • video: msm: Allow timeouts for DSI operations
  • video: msm: Add multiplier to MDP bandwidth calculation
    [*]usb: msm_otg: Enable self-powered USB OTG (sultanxda)
  • shooter: display: Clean up (sultanxda)

Rom:


  • -

Issues :


DOWNLOAD : HERE MD5: f3e563a0a8da6075aa577d970892972a

MIRROR
MIRROR

{ 20 June }

Cm updates from upstream (as of last today at 2:00 PM) : here

Kernel:


  • -

Rom:

  • Update to kitkat 4.4.4
  • USB OTG flash drives now mounts automatically (using a powered OTG cable)

Issues :
  • BFQ sched seems unstable, I might remove it...

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: 051691e5b9986b54e9dfbf89e9cdb18e

MIRROR
MIRROR

{ 11 June }

Cm updates from upstream (as of last tonight at 11:00 PM) : here

Kernel:

  • shooter: Remove ion writeback heap (sultanxda)
  • Add rotator bus scaling from CAF kk_2.7-stable (sultanxda)
  • msm_fb: Import from CAF kk_2.7-stable (sultanxda)
  • kgsl: Sync with CAF kk_2.7-stable (sultanxda)
  • Kernel built with LinaroGCC - 4.9.1

Rom:

  • Update to kitkat 4.4.3

Issues :
  • BFQ sched seems unstable, I might remove it...

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: b1719ac36a7c57aab519c8d10e2212f4

MIRROR
MIRROR

{ 20 May }

Cm updates from upstream (as of today at 4:00 PM) : here

Kernel:


  • -

Rom:

  • Reduced rom size, by removing prebuilt radio firmware files ( the ones from your phone are used )
  • No more sys.ui FC

Issues :
  • BFQ sched seems unstable, I might remove it...

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: b1719ac36a7c57aab519c8d10e2212f4

MIRROR

{ 13 May }

Cm updates from upstream (as of today at 03:00 PM) : here

Kernel:

  • defconfigs: Update kernel name to kitkat
  • msm: thermal: Update to speed up bootup time
  • lib/scatterlist: error handling in __sg_alloc_table()
  • msm: kgsl: Release process mutex appropriately to avoid deadlock
  • msm: kgsl: Increase IDLE_TIMEOUT for 2D core to 20secs
  • msm: kgsl: Fix GPU hang recovery logic
  • msm: kgsl: Reset VSC control registers
  • msm: kgsl: Fix for panic in z180 postmortem dumps
  • shoter: display: Use color calibration from M7 (more cooler colors) (enable with echo 1 > /sys/module/mdp/parameters/mdp_gamma_cooler_colors and turn off and turn on screen) sultanxda
  • softirq: reduce latencies
  • net: wireless: bcmdhd: Fix scanning for AP for some country codes (paulb_nl)
  • Enable more TCP congestion and set veno as default
  • Enable graphite
  • Linaro 4.8 fixes
  • net: wireless: bcmdhd: reduced the wakelock time of RX packet
  • net: wireless: bcmdhd: Custom KEEP_ALIVE and PNO_LOCK into Makefile
  • add BFQ-v7r3 I/O sched for 3.0
  • Kernel compiled with SaberMod 4.8.2

Rom:


Issues :
  • ?

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: 0efa52a82d5adc9e9a9799c973167edb

MIRROR

{ 01 May }

Cm updates from upstream (as of today at 09:00 AM) : here

Kernel:


  • -

Rom:


  • StorageManager: Reserve only 3% of available userpace

Issues :
  • ?

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: 1fc756425fc1c60c761af275f37b9f57

MIRROR


{ 17 April }

Cm updates from upstream (as of today at 09:00 AM) : here

Kernel:

  • Fixed VPN
  • cpufreq: interactive: turn boost_pulse off on boost off
  • cpufreq: interactive: restructure CPUFREQ_GOV_LIMITS
  • nf: xt_qtaguid: fix handling for cases where tunnels are used.
  • netfilter: qtaguid: rate limit some of the printks
  • netfilter: xt_qtaguid: remove AID_* dependency for access control
  • netfilter: qtaguid: Don't BUG_ON if create_if_tag_stat fails
  • netfilter: xt_qtaguid: fix error exit that would keep a spinlock.
  • kgsl: Fix GPU freq being set to the max by default (320MHz)
  • board-shooter-mmc: Set WiFi/WiMax cards as non-removable credit: Flemmard
  • board-shooter-wifi: disable AOSP wifi modification This kernel uses HTC BCMDHD driver, which wants this.
  • bcmdhd: Update from google-aosp-3.0-common
  • kgsl: fix genalloc BUG when detroying pagetable.
  • kgsl: Port from CAF kk_2.7_rb1.33 (sultanxda)
  • ion: ioctl compatibility with userland using old api
  • ion: Port from CAF kk_2.7_rb1.33 (sultanxda)
  • msm: camera: Assign Null to unmapped addresses
  • msm: Camera: clear control queue
  • msm: camera: Free buffers from frame queue at open
  • msm: camera: Remove additional check in msm_queue_drain
  • msm: gemini: Remove PMEM reference for input buffer
  • pmem: Add back more detailed usage statistics (sultanxda)

Rom:

  • Fixed wireless network location
  • Fixed GPS wakelock after toggling location modes
  • Camera set antibanding to AUTO
  • Fixed MMS popup window from closing 10x Revertron
    [*]Fixed VPN connections

Issues :
  • ?

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: 8118bc377fb1bc12923bb8094e7d03e5

MIRROR
{ 09 April }

Cm updates from upstream (as of today at 10:00 AM) : here

Kernel:

  • Revert "mmc: sdio: optimized SDIO IRQ handling for single irq"
  • mmc: msm_sdcc: vote for msm bus bandwidth
  • mmc: core: Export mmc_set_ios so that host drivers can use it
  • mmc: msm_sdcc: Power down slots after reboot
  • Revert "Input: Send events one packet at a time"
  • Revert "Input: Use accessor for MT values"
  • msm: audio: qdsp6v3: Fix memory leak and error handling
  • msm: audio: qdsp6v3: Add delay in speaker device profile to reduce pop
  • msm: audio: qdsp6v3: Modify the wait timer for apr registration
  • msm: audio: qdsp6v3: Close smd ports upon failure to open.
  • msm: audio: qdsp6v3: Wait indefinitely for subsystems to be loaded.

Rom:

  • Update camerawrapper to fix portrait recording with stock camera (paulnb)
  • Made liboemcamera use 3D grpu (sultanxda)
  • Make libposteffects work with display-caf (sultanxda)
  • 4Ext recovery needs to be updated to latest version

Issues :
  • VPN not working
  • Network based location is buggy (might drain the battery, use gps based location)

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: a1d5776347e3c0a5e43a5202b557522d

MIRROR
{ 25 March }

Cm updates from upstream (as of today at 07:00 PM) : here

Kernel:

  • vidc: Correct start and stop sequence. Decreased video recording lag to about 1 sec (paulnb)
  • shooter: audio: fix acoustic tables
  • Bluetooth: Fix possible wakelock
  • driver: pmem: add PMEM_FLUSH
  • arm: Enable ARM_HAS_SG_CHAIN
  • shooter: Use a shared region for PMEM & ION SMI memory (sultanxda)
  • ion: Port from (CAF KitKat msm-kk_2.7_rb1.X) (sultanxda)
  • Remove plugs -- Attempt to speed up IO
  • scheduler: compute time-average nr_running per run-queue
  • Sched Tweaks to improve performance
  • sched/nohz: Rewrite, fix and add more accurate load-avg computation
  • Increase Sound Buffer
  • Add Force fast charge
  • mm: slub: Do not take expensive steps for SLUBs speculative high-order allocations
  • mm: slub: Default slub_max_order to 0
  • shooter: display: Remove esc_byte_ratio (sultanxda)
  • kgsl: Sync with CAF msm-jb_2.5.5 (sultanxda)
  • msm_dss_io_8x60: Add delay when enabling mipi clk(sultanxda)
  • flashlight: Stay ON after screen turns OFF

Rom:

  • Userspace now has 860MB or RAM (sultanxda)
  • ART is now working ( You need to do a clean install )
  • 4Ext recovery needs to be updated to latest version

Issues :
  • Recording it's working only when started horizontal, on stock camera app (Use another JB based camera. I'm using this app )

I recommend using the below GAPPS !

DOWNLOAD : HERE MD5: e6a6fd3cb0c0ffa51267fed6c4643aa8

MIRROR

{ 11 March }

  • Cm updates from upstream (as of today at 11:00 PM) : here

    Kernel:
    • Ported CAF KitKat framebuffer & MDP drivers (sultanxda)
    • Updated sync drivers to CAF KitKat (sultanxda)
    • Updated msm_rotator to CAF KitKat (sultanxda)
    • Enabled hardware vsync (sultanxda)
    • vidc: Clean up memory-type references(sultanxda)
    • Updated display drivers to caf-kk-1.27(sultanxda)
    • shooter:display: lower display voltages
    • Added frandom support


    Rom:
    • Set minfree to : 1024,2048,2560,4096,6144,8192
    • Enable MTP & PTP USB mode (sultanxda)
    • Enabled sync framework (sultanxda)
    • Enabled MDP retire fence (sultanxda)
    • HUGE graphics performance increase (sultanxda)
    • Now were using display-caf repo
    • Fix default notification LED color
    • Added an init script to use frandom instead for random.
    • 4Ext recovery needs to be updated to latest version

    Issues :
    • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
    • Recording it's working only when started horizontal, on stock camera app
    • There is a delay when you start recording a video
    • ART is not tested ! ! !

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: c2d01d40c5833a873e8e8e19da8128c0
{ 21 February }

  • Cm updates from upstream (as of last night at 11:00 PM) : here

    Kernel:
    • Memory remap
    • fix false disconnect due to a signal sent to the reading process
    • SELinux: Fix kernel BUG on empty security contexts.
    • SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()
    • atmel: block sending button events while screen is off (sweep2wake)
    • shooteru: Disable KGSL gov
    • gpu: ion: Sync with CM Samsung MSM8660 kernel (sultanxda)


    Rom:
    • Fixed AlarmClock bug
    • Added an init.d script (99kernel) were you can modify GPU clocks & sweep2wake. It can be found in system/etc/init.d/99kernel
    • Half-res bootanimation(less memory usage during boot)
    • Total available RAM is 781MB
    • 4Ext recovery needs to be updated to latest version

    Issues :
    • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
    • Recording it's working only when started horizontal, on stock camera app
    • There is a delay when you start recording a video
    • ART is not tested ! ! !

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 4be908533d9c5ba8c818043adf1c7373

{ 10 February }

  • Cm updates from upstream (as of last night at 11:00 PM) : here

    Kernel:
    • Add support for UHID devices (10x ldeninski)
    • msm: kgsl: Use the kmalloc/vmalloc trick for the sharedmem page array
    • shooteru: Lower MM_HEAP memory
    • Input: Use accessor for MT values
    • cfg80211: discard regulatory hints from country IEs with undefined wiphy
    • cfg80211: permanently disable channels specified by base settings
    • cfg80211: export regulatory_hint_user() API
    • cfg80211: fix set_regdom() to cancel requests with same alpha2
    • shooteru: Fix MEMTYPE_SMI_ION range
    • cfg80211: Fix memory leak
    • cfg80211: add flags to define country IE processing rules
    • Select ARM_HAS_SG_CHAIN for msm8660
    • shooteru: Increase ADSP memory
    • msm: audio: qdsp6v2: disable read interrupts for smd channels
    • ion: tracing: add ftrace events for ion allocations
    • msm: Add support for ION Flushing without virtual address


    Rom:
    • Viber seems to be fixes from upstream CM
    • Total available RAM is 790MB
    • 4Ext recovery needs to be updated to latest version

    Issues :
    • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
    • Recording it's working only when started horizontal, on stock camera app
    • There is a delay when you start recording a video
    • There are some audio issues.
    • ART is not tested ! ! !

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 30435f92007b9f6a266797d78c074db3
{ 28 January }

  • Cm updates from upstream (as of today at 11:00 AM) : here

    Kernel:
    • shooteru: Remap some memory(sultanxda)
    • Revert "msm_fb: fbram: Use newer method of allocating RAM to fb"(sultanxda)
    • vidc: Fix memory type selection(sultanxda)
    • fat: fix bug in enforcing Long File Name length
    • fat: clean up xlate_to_uni()
    • vidc: Clean up mem_type code
    • shooteru: Disable HDMI support
    • shooter: More memory remap(sultanxda)
    • shooteru: Enable KSM
    • Input: Send events one packet at a time
    • fs: vfat: reduce the worst case latencies
    • FAT: Add new ioctl VFAT_IOCTL_GET_VOLUME_ID for reading the volume ID.
    • cpufreq: Add cpu-boost driver
    • Built with Linaro GCC 4.7-2014.01 (4.7.4) cortex-a8 optimized

    Rom:
    • Display HAL: Fix black screen in some games (eg. Subway Surfers)
    • Total available RAM is 783MB
    • Dex-opt data to cache partition
    • fstab: Add /cache param tweaks from CM d2 tree(sultanxda)
    • KSM can be enabled in SETTINGS>PERFORMANCE>MEMORY MANAGEMENT ( WARNING: It might use more battery ! )
    • 4Ext recovery needs to be updated to latest version

    Issues :
    • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
    • Recording it's working only when started horizontal, on stock camera app
    • There is a delay when you start recording a video
    • There are some audio issues.
    • ART is not tested ! ! !

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 50e725d26cb19a1ad79c3587bb7c3830

{ 16 January }

  • Cm updates from upstream (as of today at 06:00 PM) : here

    Kernel:
    • sched: reinitialize rq->next_balance when a CPU is hot-added (mrg666)
    • cpufreq: Fix policy getting stuck when user & kernel min/max don't overlap
    • cpufreq: interactive: Update from caf kk_3.5_rb1.18
    • shooteru: Add ION firmware heap & remap some memory(sultanxda)
    • autosmp: improve hotplug algorithm(mrg666)
    • autosmp: fix for shooter kernel(mrg666)
    • autosmp: backport from MiRaGe mako kernel see the changes at http://goo.gl/x5oyhy (mrg666)
    • shooteru: Disable kgsl shadow writes
    • shooteru: Remap some memory to fix reboots(sultanxda)
    • vidc: Don't check for secure session for DDL_CMD_MEM(sultanxda)
    • shooteru: update configs and remove powersave performance governors(mrg666)
    • random: backport updates from Linux master (3.13-rc4)(mrg666)

    Rom:
    • Qualcomm optimizations for Bionic libs( I have an increase of 800+ points in Antutu )
    • Total available RAM is 803MB
    • Min CPU freq during Bluetooth A2DP playback and screen-off set to 540Mhz
    • 4Ext recovery needs to be updated to latest version

    Issues :
    • There are some graphical tears on recorded videos.
    • Recording it's working only when started horizontal
    • There is a delay when you start recording a video
    • There are some audio issues.
    • Don't use ART for now

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 43dd2b9e58fb2babce3c6a5753078be9


{ 27 December }

  • Cm updates from upstream (as of today at 10:00) : here

    WORKING:
    • Reverted Camera app to a working state
    • Hangouts video call now works, but camera is upside down
    • More VOIP fixes

    NOT WORKING:
    • There are some audio issues.
    • Don't use ART for now


    DOWNLOAD : HERE MD5: 92d24538a9d4ef88f46bcc6b9c403570

{ 25 December }

  • Cm updates from upstream (as of today at 23:00) : here

    Beta build

    WORKING:
    • Fixed video recording (10x sultanxda & paulb-nb)
    • Increased mdp clock to 267mhz from 200mhz (sultanxda)
    • We now have 812MB of RAM, because a separate memory region needed to be created for video recording to work (10x sultanxda)

    NOT WORKING:
    • Camera might FC sometimes, because CM is updating it. Try using an other camera app from market.
    • Viewing a video when sliding from camera to gallery.
    • There some audio issues.
    • Hangouts video call isn't working
    • Don't use ART for now


    DOWNLOAD : HERE MD5: 893105611372a99efde3b43a21c4710e

{ 20 December }

  • Cm updates from upstream (as of yesterday at 19:00) : here

    Beta build

    WORKING:
    • Video playback fixed
    • Camera might FC when you exit it.
    • We now have 828MB of RAM (10x sultanxda)
    • Skype calls work
    • Android updated to 4.4.2

    NOT WORKING:
    • Camcorder not working
    • Hangouts video call isn't working
    • Don't use ART for now


    DOWNLOAD : HERE MD5: 4dc9c68a32abb87097768b7ee8751cc5

{ 04 December }

  • Cm updates from upstream (as of today at 23:00) : here

    Beta build

    WORKING:
    • ROM is now half PMEM & half ION ( credit Sultanxda & Blefish )
    • Camera is working
    • Browser fully working
    • No more glitches in Google Maps
    • Using latest mako Adreno drivers (AU_LINUX_ANDROID_JB_VANILLA_04.02.02.060.053)

    NOT WORKING:
    • Camcorder not working
    • Playing videos not working
    • Google Now has some issues
    • Don't use ART for now
    DOWNLOAD : HERE MD5: f4667c40a8ebfd19e065e46a83d02574


{ 14 November }

  • Cm updates from upstream (as of today at 11:00) : here

    Initial ALPHA release
    • Audio still has some issues
    • Browser is blackout
    • Some graphical issues
    • Don't use ART for now
    • Most CM features are missing because they aren't merged into the source yet

    DOWNLOAD : HERE MD5: cd5a54cb02564fcf33a8972cae778867

MIRROR goo.im : HERE

MIRROR androidfilehost.com : HERE

MIRROR basketbuild.com : HERE

Banks GAPPS for 4.4.2 (I'm using the MINIMAL version)​

REPO with kernel source: https://github.com/johnnyslt/android_kernel_htc_shooter
Device specific repos: https://github.com/johnnyslt
Kernel compiled with THIS TOOLCHAIN

beer.gif
 
Last edited:

johnnyslt

Inactive Recognized Developer
Sep 10, 2010
1,381
6,262
Bucharest
How to get logs :

LOGCAT:
from windows cmd or linux terminal ( must have android SDK installed )

1. adb shell
2. logcat > sdcard/logcat.txt


or from terminal on phone :

1.su
2. logcat > sdcard/logcat.txt


DMESG:
from windows cmd or linux terminal ( must have android SDK installed )

1. adb shell
2. dmesg > sdcard/dmesg.txt


or from terminal on phone :

1.su
2. dmesg > sdcard/dmesg.txt


LAST_KMSG:
from windows cmd or linux terminal ( must have android SDK installed )

1. adb shell
2. cat proc/last_kmsg > sdcard/last_kmsg.txt


or from terminal on phone :

1.su
2. cat proc/last_kmsg > sdcard/last_kmsg.txt


beer.gif
 
Last edited:
CHANGELOG & DOWNLOAD :

{ 14 November }

  • Cm updates from upstream (as of today at 11:00) : here

    Initial ALPHA release


    • Audio still has some issues
    • Some graphical issues
    • Don't use ART for now
    • Most CM features are missing because they aren't merged into the source yet

    DOWNLOAD : HERE MD5: cd5a54cb02564fcf33a8972cae778867

MIRROR goo.im : HERE

MIRROR Basktebuild.com : HERE

GAPPS for 4.4

REPO with kernel source: https://github.com/johnnyslt/android_kernel_htc_msm8660
Device specific repos: https://github.com/johnnyslt
Kernel compiled with THIS TOOLCHAIN

beer.gif

WOW! good job!
 
  • Like
Reactions: Amoflex

______

Senior Member
Feb 22, 2012
112
48
Anyone tried Google Voice Command? It always says "Can't reach Google at the moment". Sometimes it works, for a min or two then the same. It's due to audio problem of current stage?
 

Kiinasu

Senior Member
Apr 15, 2012
172
84
Jeju
love your work. downloading now. cant wait for ART :D

/edit: wanted to copy it over, but my evo doesnt recognize any micro sd cards. tried 3, none of them works. anyone an idea, what could be wrong? it doesnt even work in 4ext. my pc crashed a few hours ago, as i tried moving a few file to my evo, could that be a problem?
 
Last edited:

CroPunisher

Senior Member
Jul 24, 2012
78
18
Zadar
this works on jupunut HBOOT 1.53 S-OFF?

Yes, just check U have the correct radio version.

Sent from my Evo 3D GSM using xda app-developers app

---------- Post added at 11:15 PM ---------- Previous post was at 10:45 PM ----------

love your work. downloading now. cant wait for ART :D

/edit: wanted to copy it over, but my evo doesnt recognize any micro sd cards. tried 3, none of them works. anyone an idea, what could be wrong? it doesnt even work in 4ext. my pc crashed a few hours ago, as i tried moving a few file to my evo, could that be a problem?

Try connecting them to computer if it is operational again and see if they work, sometimes it can corrupt the cards and U need to reformat it. If that is the case make sure to format them to fat32.

Sent from my Evo 3D GSM using xda app-developers app
 

Kiinasu

Senior Member
Apr 15, 2012
172
84
Jeju
Try connecting them to computer if it is operational again and see if they work, sometimes it can corrupt the cards and U need to reformat it. If that is the case make sure to format them to fat32.

Sent from my Evo 3D GSM using xda app-developers app

thanks, had to boot it without sd, and then again with and now its working again. flashing cm 11 now :D

/edit: okay, the other sd card is corrupted, have to reformat it. damn :D
 
Last edited:

mvha

Senior Member
Feb 18, 2010
234
45
One day with cm 11:
Yeah Kitkat is amazing!
It's my first contact with android 4.4 so I'm impressed.

About release:
- many bugs :( I understand it's apha version so i don't even logcat nothing.

I have finger's crossed and I can't wait for final version.

maybe it's a stupid question but can I flash your rom with another kernel(form another evo3d rom)?
 

jcsy

Senior Member
Jan 9, 2009
3,754
949
Land of the Z1/EVO3D/GTAB10.1(2)
maybe it's a stupid question but can I flash your rom with another kernel(form another evo3d rom)?

Just to be safe, I wouldn't flash other kernels
We don't know what breaks and what gains and I doubt those gains are... Big
-----------------------------------------------------
HTC EVO 3D GSM
JB4.3.1 | 17 October 2013
Johnny 10 Nov kernel | Deadline
-----------------------------------------------------
 

cenex

Senior Member
Nov 2, 2007
64
13
sorry johnny but i can't find any bugs and antutu benchmark give me 12000 points with 1,5ghz cpu :D and the battery life is very very very good!

Inviato dal mio Evo 3D GSM utilizzando Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 154
    CyanogenMod 11.0 - KitKat 4.4.4 - Unofficial



    e6eWNSX.jpg

    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
    * Your warranty is now void.
    *
    * We are not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, we will laugh at you.
    */

    FEATURES:
    • Built from CM source
      [*]MiRaGe Kernel compiled from source ( 10x @mrg666 )
      [*]Kernel overclockable up to 1728 Mhz
      [*]ION & PMEM memory allocations!
      [*]Latest display drivers from CAF (msm-kk-1.27)
      [*]Kernel HW-VSYNC
      [*]ART runtime
      [*]Service
      [*]Text
      [*]Data
      [*]Calls
      [*]Audio
      [*]WiFi
      [*]Bluetooth
      [*]Google Now
      [*]GPS
      [*]MMS
      [*]VoIP
      [*]Qualcomm Mako libs & firmware
      [*]Video playback
      [*]Audio playback
      [*]Camera
      [*]Camcorder
      [*]USB OTG support, using powered USB OTG cable
      [*]Tethering ( WIFI, USB & BT)
      [*]VPN
      [*]Control over button backlight power ( Settings > Buttons > Backlight )
      [*]Change button backlight timeout ( Settings > Buttons > Backlight )
      [*]Control over haptic feedback power ( Settings > More options > Vibrator intensity )
      [*]Sweep2Wake




    BUGS / NOT WORKING:


    • 3D recording not working

      [*]Ocazional data drops.

      [*]In-call volume sometimes gets reseted to maximum. Temporary fix:ENABLE TOUCH SOUNDS
      [*]Camcorder: When recording video, sometimes first video will not work, the second one should be OK.
      [*]Sending MMS's might not work for everybody (receiving works) !
      [*]Bluetooth tethering might not work from the first time



    SCREENSHOTS:

    1luuH.png
    1luuU.png


    1luuZ.png
    1luv6.png


    1luv8.png




    RECOMANDATION:

    • Do not use superwipes
      [*]Required HBOOT : 1.49.xxxx
      [*]S-OFF
      [*]Radio/baseband : 11.77.3504.00P_11.25.3504.06_M get it from HERE
      [*]4ext recovery or Philz Touch Recovery HERE


    If you have spontaneous reboots, check that you have the required radio version in BOOTLOADER not in SETTINGS -> ABOUT PHONE

    Follow these exact steps to install the ROM :

    If coming from an other ROM do this :

    • 1. Wipe data, cache, and system (wipe all partitions except sdcard if on 4ext recovery) if coming from any other ROM
    • 2. Flash ROM
    • 3. Flash GAPPS
    • 4. Reboot
    • 5. ???
    • 6. Profit

    If coming from previous build of CM11.0 do this :

    • 1. Wipe cache and dalvik-cache
    • 2. Flash ROM
    • 3. Flash GAPPS
    • 4. Reboot
    • 5. ???
    • 6. Profit


    • To enable Developer Options and Performance go to Settings > About Phone and repeatedly press Build Number.
    • If you have a problem with ADB, update your android-sdk to latest version.
    • To enable Advanced reboot menu got Settings > Developer Options > check Advanced reboot




    Thanks to:

    • Agrabren
      [*]Dastin1015
      [*]mrg666
      [*]Everyone who contributes to CM as this is based on their hard work!
      [*]Helicopter88
      [*]LaidbackNikez
      [*]android1234567(sultanxda)
      [*]sjoerd0301
      [*]Bigwillyg
      [*]Evervolv Team
      [*]GOO.IM TEAM




    Issues tracker:

    Please use this issues tracker HERE, if you want to help fixing bugs.
    Logs are needed (logcat / dmesg / last_kmsg / screenshots), not just "got FC", "it's not working", "+1" or useless replies.


    beer.gif

    XDA:DevDB Information
    CyanogenMod 11.0 - KitKat 4.4.4, ROM for the HTC EVO 3D

    Contributors
    johnnyslt
    ROM OS Version: 4.4.x KitKat
    ROM Kernel: Linux 3.0.x

    Version Information
    Status: Stable

    Created 2014-06-30
    Last Updated 2014-11-08
    82
    Downloads & Changelog

    CHANGELOG & DOWNLOAD :

    { 08 November }

    Cm updates from upstream (as of today at 12:00 PM ) : here

    Kernel:


    • -

    Rom:


    • -

    Issues :

    • Hangouts calls doesn't work

    DOWNLOAD : HERE


    Older versions:



    { 19 August }

    Cm updates from upstream (as of today at 12:00 PM ) : here

    Kernel:


    • -

    Rom:


    • Enabled SDCard eject

    Issues :


    DOWNLOAD : HERE MD5: 204577fa1193435141286aed116b57dc

    MIRROR



    { 29 July }

    Cm updates from upstream (as of last today at 12:00 PM ) : here

    Kernel:


    • -

    Rom:


    • Fix HD recoding resolution.

    Issues :


    DOWNLOAD : HERE MD5: bbedbe850c1d6c501847a79145c2204b

    MIRROR


    { 10 July }

    Cm updates from upstream (as of last night at 10:00 PM ) : here

    Kernel:

    • Reverted battery changes
    • block: row: Fix crash when adding a new field in bio struct

    Rom:


    • -

    Issues :


    DOWNLOAD : HERE MD5: 18129103018329b9063e7bf59ace607d

    MIRROR
    MIRROR
    MIRROR

    { 01 July }

    Cm updates from upstream (as of last today at 12:00 PM) : here

    Kernel:

    • Avoid to create duplicate filename for misc devices.
    • msm: kgsl: Fix spinlock recursion in destroy pagetable
    • msm: kgsl: prevent kgsl_get_pagetable from returning a destroyed pt
    • msm: kgsl: Look up the process struct in process_mem_open()
    • msm: kgsl: hold a process_private refcount in process_mem_print
    • msm: kgsl: Fix GPUMMU mapping.
    • msm: kgsl: Cleanup the memory free list
    • kgsl: Sync with CAF kk_2.7-stable (sultanxda)
    • msm: htc_battery: Use fast (5 sec) timer while on battery power (sultanxda)
    • video: msm: Allow timeouts for DSI operations
    • video: msm: Add multiplier to MDP bandwidth calculation
      [*]usb: msm_otg: Enable self-powered USB OTG (sultanxda)
    • shooter: display: Clean up (sultanxda)

    Rom:


    • -

    Issues :


    DOWNLOAD : HERE MD5: f3e563a0a8da6075aa577d970892972a

    MIRROR
    MIRROR

    { 20 June }

    Cm updates from upstream (as of last today at 2:00 PM) : here

    Kernel:


    • -

    Rom:

    • Update to kitkat 4.4.4
    • USB OTG flash drives now mounts automatically (using a powered OTG cable)

    Issues :
    • BFQ sched seems unstable, I might remove it...

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 051691e5b9986b54e9dfbf89e9cdb18e

    MIRROR
    MIRROR

    { 11 June }

    Cm updates from upstream (as of last tonight at 11:00 PM) : here

    Kernel:

    • shooter: Remove ion writeback heap (sultanxda)
    • Add rotator bus scaling from CAF kk_2.7-stable (sultanxda)
    • msm_fb: Import from CAF kk_2.7-stable (sultanxda)
    • kgsl: Sync with CAF kk_2.7-stable (sultanxda)
    • Kernel built with LinaroGCC - 4.9.1

    Rom:

    • Update to kitkat 4.4.3

    Issues :
    • BFQ sched seems unstable, I might remove it...

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: b1719ac36a7c57aab519c8d10e2212f4

    MIRROR
    MIRROR

    { 20 May }

    Cm updates from upstream (as of today at 4:00 PM) : here

    Kernel:


    • -

    Rom:

    • Reduced rom size, by removing prebuilt radio firmware files ( the ones from your phone are used )
    • No more sys.ui FC

    Issues :
    • BFQ sched seems unstable, I might remove it...

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: b1719ac36a7c57aab519c8d10e2212f4

    MIRROR

    { 13 May }

    Cm updates from upstream (as of today at 03:00 PM) : here

    Kernel:

    • defconfigs: Update kernel name to kitkat
    • msm: thermal: Update to speed up bootup time
    • lib/scatterlist: error handling in __sg_alloc_table()
    • msm: kgsl: Release process mutex appropriately to avoid deadlock
    • msm: kgsl: Increase IDLE_TIMEOUT for 2D core to 20secs
    • msm: kgsl: Fix GPU hang recovery logic
    • msm: kgsl: Reset VSC control registers
    • msm: kgsl: Fix for panic in z180 postmortem dumps
    • shoter: display: Use color calibration from M7 (more cooler colors) (enable with echo 1 > /sys/module/mdp/parameters/mdp_gamma_cooler_colors and turn off and turn on screen) sultanxda
    • softirq: reduce latencies
    • net: wireless: bcmdhd: Fix scanning for AP for some country codes (paulb_nl)
    • Enable more TCP congestion and set veno as default
    • Enable graphite
    • Linaro 4.8 fixes
    • net: wireless: bcmdhd: reduced the wakelock time of RX packet
    • net: wireless: bcmdhd: Custom KEEP_ALIVE and PNO_LOCK into Makefile
    • add BFQ-v7r3 I/O sched for 3.0
    • Kernel compiled with SaberMod 4.8.2

    Rom:


    Issues :
    • ?

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 0efa52a82d5adc9e9a9799c973167edb

    MIRROR

    { 01 May }

    Cm updates from upstream (as of today at 09:00 AM) : here

    Kernel:


    • -

    Rom:


    • StorageManager: Reserve only 3% of available userpace

    Issues :
    • ?

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 1fc756425fc1c60c761af275f37b9f57

    MIRROR


    { 17 April }

    Cm updates from upstream (as of today at 09:00 AM) : here

    Kernel:

    • Fixed VPN
    • cpufreq: interactive: turn boost_pulse off on boost off
    • cpufreq: interactive: restructure CPUFREQ_GOV_LIMITS
    • nf: xt_qtaguid: fix handling for cases where tunnels are used.
    • netfilter: qtaguid: rate limit some of the printks
    • netfilter: xt_qtaguid: remove AID_* dependency for access control
    • netfilter: qtaguid: Don't BUG_ON if create_if_tag_stat fails
    • netfilter: xt_qtaguid: fix error exit that would keep a spinlock.
    • kgsl: Fix GPU freq being set to the max by default (320MHz)
    • board-shooter-mmc: Set WiFi/WiMax cards as non-removable credit: Flemmard
    • board-shooter-wifi: disable AOSP wifi modification This kernel uses HTC BCMDHD driver, which wants this.
    • bcmdhd: Update from google-aosp-3.0-common
    • kgsl: fix genalloc BUG when detroying pagetable.
    • kgsl: Port from CAF kk_2.7_rb1.33 (sultanxda)
    • ion: ioctl compatibility with userland using old api
    • ion: Port from CAF kk_2.7_rb1.33 (sultanxda)
    • msm: camera: Assign Null to unmapped addresses
    • msm: Camera: clear control queue
    • msm: camera: Free buffers from frame queue at open
    • msm: camera: Remove additional check in msm_queue_drain
    • msm: gemini: Remove PMEM reference for input buffer
    • pmem: Add back more detailed usage statistics (sultanxda)

    Rom:

    • Fixed wireless network location
    • Fixed GPS wakelock after toggling location modes
    • Camera set antibanding to AUTO
    • Fixed MMS popup window from closing 10x Revertron
      [*]Fixed VPN connections

    Issues :
    • ?

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: 8118bc377fb1bc12923bb8094e7d03e5

    MIRROR
    { 09 April }

    Cm updates from upstream (as of today at 10:00 AM) : here

    Kernel:

    • Revert "mmc: sdio: optimized SDIO IRQ handling for single irq"
    • mmc: msm_sdcc: vote for msm bus bandwidth
    • mmc: core: Export mmc_set_ios so that host drivers can use it
    • mmc: msm_sdcc: Power down slots after reboot
    • Revert "Input: Send events one packet at a time"
    • Revert "Input: Use accessor for MT values"
    • msm: audio: qdsp6v3: Fix memory leak and error handling
    • msm: audio: qdsp6v3: Add delay in speaker device profile to reduce pop
    • msm: audio: qdsp6v3: Modify the wait timer for apr registration
    • msm: audio: qdsp6v3: Close smd ports upon failure to open.
    • msm: audio: qdsp6v3: Wait indefinitely for subsystems to be loaded.

    Rom:

    • Update camerawrapper to fix portrait recording with stock camera (paulnb)
    • Made liboemcamera use 3D grpu (sultanxda)
    • Make libposteffects work with display-caf (sultanxda)
    • 4Ext recovery needs to be updated to latest version

    Issues :
    • VPN not working
    • Network based location is buggy (might drain the battery, use gps based location)

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: a1d5776347e3c0a5e43a5202b557522d

    MIRROR
    { 25 March }

    Cm updates from upstream (as of today at 07:00 PM) : here

    Kernel:

    • vidc: Correct start and stop sequence. Decreased video recording lag to about 1 sec (paulnb)
    • shooter: audio: fix acoustic tables
    • Bluetooth: Fix possible wakelock
    • driver: pmem: add PMEM_FLUSH
    • arm: Enable ARM_HAS_SG_CHAIN
    • shooter: Use a shared region for PMEM & ION SMI memory (sultanxda)
    • ion: Port from (CAF KitKat msm-kk_2.7_rb1.X) (sultanxda)
    • Remove plugs -- Attempt to speed up IO
    • scheduler: compute time-average nr_running per run-queue
    • Sched Tweaks to improve performance
    • sched/nohz: Rewrite, fix and add more accurate load-avg computation
    • Increase Sound Buffer
    • Add Force fast charge
    • mm: slub: Do not take expensive steps for SLUBs speculative high-order allocations
    • mm: slub: Default slub_max_order to 0
    • shooter: display: Remove esc_byte_ratio (sultanxda)
    • kgsl: Sync with CAF msm-jb_2.5.5 (sultanxda)
    • msm_dss_io_8x60: Add delay when enabling mipi clk(sultanxda)
    • flashlight: Stay ON after screen turns OFF

    Rom:

    • Userspace now has 860MB or RAM (sultanxda)
    • ART is now working ( You need to do a clean install )
    • 4Ext recovery needs to be updated to latest version

    Issues :
    • Recording it's working only when started horizontal, on stock camera app (Use another JB based camera. I'm using this app )

    I recommend using the below GAPPS !

    DOWNLOAD : HERE MD5: e6a6fd3cb0c0ffa51267fed6c4643aa8

    MIRROR

    { 11 March }

    • Cm updates from upstream (as of today at 11:00 PM) : here

      Kernel:
      • Ported CAF KitKat framebuffer & MDP drivers (sultanxda)
      • Updated sync drivers to CAF KitKat (sultanxda)
      • Updated msm_rotator to CAF KitKat (sultanxda)
      • Enabled hardware vsync (sultanxda)
      • vidc: Clean up memory-type references(sultanxda)
      • Updated display drivers to caf-kk-1.27(sultanxda)
      • shooter:display: lower display voltages
      • Added frandom support


      Rom:
      • Set minfree to : 1024,2048,2560,4096,6144,8192
      • Enable MTP & PTP USB mode (sultanxda)
      • Enabled sync framework (sultanxda)
      • Enabled MDP retire fence (sultanxda)
      • HUGE graphics performance increase (sultanxda)
      • Now were using display-caf repo
      • Fix default notification LED color
      • Added an init script to use frandom instead for random.
      • 4Ext recovery needs to be updated to latest version

      Issues :
      • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
      • Recording it's working only when started horizontal, on stock camera app
      • There is a delay when you start recording a video
      • ART is not tested ! ! !

      I recommend using the below GAPPS !

      DOWNLOAD : HERE MD5: c2d01d40c5833a873e8e8e19da8128c0
    { 21 February }

    • Cm updates from upstream (as of last night at 11:00 PM) : here

      Kernel:
      • Memory remap
      • fix false disconnect due to a signal sent to the reading process
      • SELinux: Fix kernel BUG on empty security contexts.
      • SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()
      • atmel: block sending button events while screen is off (sweep2wake)
      • shooteru: Disable KGSL gov
      • gpu: ion: Sync with CM Samsung MSM8660 kernel (sultanxda)


      Rom:
      • Fixed AlarmClock bug
      • Added an init.d script (99kernel) were you can modify GPU clocks & sweep2wake. It can be found in system/etc/init.d/99kernel
      • Half-res bootanimation(less memory usage during boot)
      • Total available RAM is 781MB
      • 4Ext recovery needs to be updated to latest version

      Issues :
      • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
      • Recording it's working only when started horizontal, on stock camera app
      • There is a delay when you start recording a video
      • ART is not tested ! ! !

      I recommend using the below GAPPS !

      DOWNLOAD : HERE MD5: 4be908533d9c5ba8c818043adf1c7373

    { 10 February }

    • Cm updates from upstream (as of last night at 11:00 PM) : here

      Kernel:
      • Add support for UHID devices (10x ldeninski)
      • msm: kgsl: Use the kmalloc/vmalloc trick for the sharedmem page array
      • shooteru: Lower MM_HEAP memory
      • Input: Use accessor for MT values
      • cfg80211: discard regulatory hints from country IEs with undefined wiphy
      • cfg80211: permanently disable channels specified by base settings
      • cfg80211: export regulatory_hint_user() API
      • cfg80211: fix set_regdom() to cancel requests with same alpha2
      • shooteru: Fix MEMTYPE_SMI_ION range
      • cfg80211: Fix memory leak
      • cfg80211: add flags to define country IE processing rules
      • Select ARM_HAS_SG_CHAIN for msm8660
      • shooteru: Increase ADSP memory
      • msm: audio: qdsp6v2: disable read interrupts for smd channels
      • ion: tracing: add ftrace events for ion allocations
      • msm: Add support for ION Flushing without virtual address


      Rom:
      • Viber seems to be fixes from upstream CM
      • Total available RAM is 790MB
      • 4Ext recovery needs to be updated to latest version

      Issues :
      • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
      • Recording it's working only when started horizontal, on stock camera app
      • There is a delay when you start recording a video
      • There are some audio issues.
      • ART is not tested ! ! !

      I recommend using the below GAPPS !

      DOWNLOAD : HERE MD5: 30435f92007b9f6a266797d78c074db3
    { 28 January }

    • Cm updates from upstream (as of today at 11:00 AM) : here

      Kernel:
      • shooteru: Remap some memory(sultanxda)
      • Revert "msm_fb: fbram: Use newer method of allocating RAM to fb"(sultanxda)
      • vidc: Fix memory type selection(sultanxda)
      • fat: fix bug in enforcing Long File Name length
      • fat: clean up xlate_to_uni()
      • vidc: Clean up mem_type code
      • shooteru: Disable HDMI support
      • shooter: More memory remap(sultanxda)
      • shooteru: Enable KSM
      • Input: Send events one packet at a time
      • fs: vfat: reduce the worst case latencies
      • FAT: Add new ioctl VFAT_IOCTL_GET_VOLUME_ID for reading the volume ID.
      • cpufreq: Add cpu-boost driver
      • Built with Linaro GCC 4.7-2014.01 (4.7.4) cortex-a8 optimized

      Rom:
      • Display HAL: Fix black screen in some games (eg. Subway Surfers)
      • Total available RAM is 783MB
      • Dex-opt data to cache partition
      • fstab: Add /cache param tweaks from CM d2 tree(sultanxda)
      • KSM can be enabled in SETTINGS>PERFORMANCE>MEMORY MANAGEMENT ( WARNING: It might use more battery ! )
      • 4Ext recovery needs to be updated to latest version

      Issues :
      • There are some graphical tears on recorded videos. (Use another JB based camera. I'm using this app )
      • Recording it's working only when started horizontal, on stock camera app
      • There is a delay when you start recording a video
      • There are some audio issues.
      • ART is not tested ! ! !

      I recommend using the below GAPPS !

      DOWNLOAD : HERE MD5: 50e725d26cb19a1ad79c3587bb7c3830

    { 16 January }

    • Cm updates from upstream (as of today at 06:00 PM) : here

      Kernel:
      • sched: reinitialize rq->next_balance when a CPU is hot-added (mrg666)
      • cpufreq: Fix policy getting stuck when user & kernel min/max don't overlap
      • cpufreq: interactive: Update from caf kk_3.5_rb1.18
      • shooteru: Add ION firmware heap & remap some memory(sultanxda)
      • autosmp: improve hotplug algorithm(mrg666)
      • autosmp: fix for shooter kernel(mrg666)
      • autosmp: backport from MiRaGe mako kernel see the changes at http://goo.gl/x5oyhy (mrg666)
      • shooteru: Disable kgsl shadow writes
      • shooteru: Remap some memory to fix reboots(sultanxda)
      • vidc: Don't check for secure session for DDL_CMD_MEM(sultanxda)
      • shooteru: update configs and remove powersave performance governors(mrg666)
      • random: backport updates from Linux master (3.13-rc4)(mrg666)

      Rom:
      • Qualcomm optimizations for Bionic libs( I have an increase of 800+ points in Antutu )
      • Total available RAM is 803MB
      • Min CPU freq during Bluetooth A2DP playback and screen-off set to 540Mhz
      • 4Ext recovery needs to be updated to latest version

      Issues :
      • There are some graphical tears on recorded videos.
      • Recording it's working only when started horizontal
      • There is a delay when you start recording a video
      • There are some audio issues.
      • Don't use ART for now

      I recommend using the below GAPPS !

      DOWNLOAD : HERE MD5: 43dd2b9e58fb2babce3c6a5753078be9


    { 27 December }

    • Cm updates from upstream (as of today at 10:00) : here

      WORKING:
      • Reverted Camera app to a working state
      • Hangouts video call now works, but camera is upside down
      • More VOIP fixes

      NOT WORKING:
      • There are some audio issues.
      • Don't use ART for now


      DOWNLOAD : HERE MD5: 92d24538a9d4ef88f46bcc6b9c403570

    { 25 December }

    • Cm updates from upstream (as of today at 23:00) : here

      Beta build

      WORKING:
      • Fixed video recording (10x sultanxda & paulb-nb)
      • Increased mdp clock to 267mhz from 200mhz (sultanxda)
      • We now have 812MB of RAM, because a separate memory region needed to be created for video recording to work (10x sultanxda)

      NOT WORKING:
      • Camera might FC sometimes, because CM is updating it. Try using an other camera app from market.
      • Viewing a video when sliding from camera to gallery.
      • There some audio issues.
      • Hangouts video call isn't working
      • Don't use ART for now


      DOWNLOAD : HERE MD5: 893105611372a99efde3b43a21c4710e

    { 20 December }

    • Cm updates from upstream (as of yesterday at 19:00) : here

      Beta build

      WORKING:
      • Video playback fixed
      • Camera might FC when you exit it.
      • We now have 828MB of RAM (10x sultanxda)
      • Skype calls work
      • Android updated to 4.4.2

      NOT WORKING:
      • Camcorder not working
      • Hangouts video call isn't working
      • Don't use ART for now


      DOWNLOAD : HERE MD5: 4dc9c68a32abb87097768b7ee8751cc5

    { 04 December }

    • Cm updates from upstream (as of today at 23:00) : here

      Beta build

      WORKING:
      • ROM is now half PMEM & half ION ( credit Sultanxda & Blefish )
      • Camera is working
      • Browser fully working
      • No more glitches in Google Maps
      • Using latest mako Adreno drivers (AU_LINUX_ANDROID_JB_VANILLA_04.02.02.060.053)

      NOT WORKING:
      • Camcorder not working
      • Playing videos not working
      • Google Now has some issues
      • Don't use ART for now
      DOWNLOAD : HERE MD5: f4667c40a8ebfd19e065e46a83d02574


    { 14 November }

    • Cm updates from upstream (as of today at 11:00) : here

      Initial ALPHA release
      • Audio still has some issues
      • Browser is blackout
      • Some graphical issues
      • Don't use ART for now
      • Most CM features are missing because they aren't merged into the source yet

      DOWNLOAD : HERE MD5: cd5a54cb02564fcf33a8972cae778867

    MIRROR goo.im : HERE

    MIRROR androidfilehost.com : HERE

    MIRROR basketbuild.com : HERE

    Banks GAPPS for 4.4.2 (I'm using the MINIMAL version)​

    REPO with kernel source: https://github.com/johnnyslt/android_kernel_htc_shooter
    Device specific repos: https://github.com/johnnyslt
    Kernel compiled with THIS TOOLCHAIN

    beer.gif
    40
    How to get logs :

    LOGCAT:
    from windows cmd or linux terminal ( must have android SDK installed )

    1. adb shell
    2. logcat > sdcard/logcat.txt


    or from terminal on phone :

    1.su
    2. logcat > sdcard/logcat.txt


    DMESG:
    from windows cmd or linux terminal ( must have android SDK installed )

    1. adb shell
    2. dmesg > sdcard/dmesg.txt


    or from terminal on phone :

    1.su
    2. dmesg > sdcard/dmesg.txt


    LAST_KMSG:
    from windows cmd or linux terminal ( must have android SDK installed )

    1. adb shell
    2. cat proc/last_kmsg > sdcard/last_kmsg.txt


    or from terminal on phone :

    1.su
    2. cat proc/last_kmsg > sdcard/last_kmsg.txt


    beer.gif
    32
    Christmas came early !

    I've uploaded a new build.

    Overall stability of the ROM has improved, camcorder is not working because video encoder whats PMEM and whe're using ION. More hacks are required to make encoder to use PMEM and decoder ION.


    P.S If you want the transparent statusbar comment this line in build.prop

    before
    Code:
     ro.config.low_ram=true

    after
    Code:
    #ro.config.low_ram=true
    28
    I understand that 3D Camera bug will be unsolvable, but please at-least strive to solve given below bugs, and one more thing that when I press Power button, some time wake quick, some time it forget to wake, any solution of this problem???

    In-call volume sometimes gets reseted to maximum. Temporary fix:ENABLE TOUCH SOUNDS
    Camcorder: When recording video, sometimes first video will not work, the second one should be OK.
    Sending MMS's might not work for everybody (receiving works) !

    You say it like I don't want to fix those bugs. Thoses 3 bugs in the OP, because I don't know how to fix them. When I first started building ROMs I didn't knew much about anything, but I've come a long way and learned a few things.

    Every thing I share here, comes at no cost, and I make them because of my passion for android and linux.

    So if you want to help, FIND A SOLUTION for those bugs, rather than complaining that I don't put enough time in to this.

    The delay when turning screen is on it's because of the new display drivers, that I've sweated my ass off, to bring them up-to-date and available to you guys.

    My goal is to make the phone run better and better and we'll get there.......................................at some point.