[ROM]CYANOGENMOD 12.1[5.1.1][UNOFFICIAL][Wiko Rainbow][Micromax A120][FINAL-V3]

MaxisMan

Senior Member
Dec 9, 2014
590
250
93
Hey can you help me out on flashing WIKO as other tutorials are not working :(
Assuming you have already installed the appropriate drivers, run SPFT as administrator and just click 'Scatter-loading' and select Wiko's scatter file, click the arrow beside 'Download only' then select 'Firmware upgrade.' After that, hit the green Download icon then connect your phone.
 
  • Like
Reactions: taksheelj

taksheelj

Senior Member
Apr 21, 2015
257
53
0
www.bestandroidrootedapps.com
Assuming you have already installed the appropriate drivers, run SPFT as administrator and just click 'Scatter-loading' and select Wiko's scatter file, click the arrow beside 'Download only' then select 'Firmware upgrade.' After that, hit the green Download icon then connect your phone.
Thanks i wil try it right now only :) , In switched off mode right ? i connect device in switch off mode ? i have kept debugging ON!

---------- Post added at 08:30 AM ---------- Previous post was at 08:22 AM ----------

It didnt work :confused:

Sent from my Micromax A120 using XDA Free mobile app
 

florentino974

Senior Member
Nov 5, 2014
62
4
28
moonrotation and Raveloo

I select scatter file
i click on firmware upgrade
then i remove battery and connect the device
it makes sound of connection and in 3-4 seconds discoonected sound pops up

i have attached the image this is how it keeps on looking
It seem like driver problem.
Check if it's install in Device Manager when you connect your rainbow to usb without baterry in your PC.
 

realmin04

Senior Member
Apr 9, 2015
117
36
48
General Trias
moonrotation and Raveloo

I select scatter file
i click on firmware upgrade
then i remove battery and connect the device
it makes sound of connection and in 3-4 seconds discoonected sound pops up

i have attached the image this is how it keeps on looking
You're using windows 8.1, right? Then, disable the driver signature enforcement by clicking restart while holding the shift, and go to troubleshooting > advanced options > startup settings and click restart. Hit f7 or number 7 and when it finishes booting, you can now reinstall the driver...
 
  • Like
Reactions: taksheelj

taksheelj

Senior Member
Apr 21, 2015
257
53
0
www.bestandroidrootedapps.com
ThankYOU

You can download Auto MTK drivers here: http://d-h.st/D0y SPFT should work after installing them
Raveloo, Moonrotation, niyas90, florantino974 thankss alot for helping me with the SP flash tool!!
Finally after getting that autoMTK driver you suggested Raveloo, the SPFT worked and now i am in the WIKO ROM and going to flash CM12!

Thanks alot everyone :D:D:D:p:)

and yes! CWM doesn't work! The device will load into system recovery only! SO PHILZ is necessity!
 
Last edited:
  • Like
Reactions: MaxisMan