[ROM][D802] "Metallium OS" by Spike Lab

[Schneiderle]

See

Spike Laboratory - Metallium​

ABOUT Spike Laboratory - Metallium

Spike Laboratory - Metallium >>SPLM is an after market firmware based latest "Android Lolli-Pop 5.X.X. This firmware is designed By Spike Laboratory .This firmware suits specially for those people who like,Multitasking performance,optimum speed. In-addition to This the firmware has Inbuilt options and settings to make customization of your Device the way you like.

Features , changelogs and screenshots can be found on Spike Laboratory - WEB


SUPPORT FOR SPLM RELATED ISSUES :

We spend an astonishing amount of time developing this firmware. We can't spend much time on XDA as a result, so if you need support, please try the following:

Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has addressed it already. Especially if you're even close to new at this.

Ask a question in your device forum either in xda . Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.

DOWNLOAD LINKS:

SPLM ROM AND RECOMMENDED GAPPS
SPLM ROM for LG G2-d802

(Please do not mirror Download links or Mention Link in any of your posts )


INSTALLATION STEPS:

Minimum Requirements To Install SPLM:

Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
You must be on the LP bootstack here
Recommended Custom Recovery TWRP : Click Here to View TWRP Offical supported devices

Installation Procedure:

(A)If you are making a Fresh Installation(or Coming from any other rom other than SPLM) :

Boot Into Recovery Mode
Wipe Data,System,Cache,Dalvik
Flash provide latest SPLM ROM Zip
Again Wipe Cache and Dalvik
Reboot To System
Now again Reboot into Recovery Mode
Flash latest G-Apps
Wipe Cache and Dalvik....and Reboot To System.

(B)If you are already Running SPLM Rom But You want to Update with latest Version:

Boot Into Recovery Mode
Flash provided Updates of SPLM ROM(latest weekly)
Again Wipe Cache and Dalvik
Reboot To System.

SOURCE:

SPLM ROM complete source
Kernel sources



OFFICIAL LINKS & INFORMATIONS :

Official Web-Page



WHO IS TEAM SPIKE LABORATORY?:
TEAM SPIKE LABORATORY

Every donation you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make SPLM better with every release. Your support means the world to us! If you've enjoyed SPLM Rom, please consider contributing or donating so we can achieve our goal.Please Don't hesitate to hit the THANKS button.Thank you, and we hope you continue to enjoy SPLM Roms!
http://forum.xda-developers.com/donatetome.php?u=4758315


​

XDA:DevDB Information
Metallium OS, ROM for the LG G2

Contributors
Schneiderle, Mardon
Source Code: https://github.com/Metallium-ROM

ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x

Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-09-09

Created 2015-08-18
Last Updated 2015-09-10

 

[Schneiderle]

Reserved

 

[Schneiderle]

Reserved

 

[serhangelgor]

Screenshots and links?

 

[Mardon]

Screenshots and links?

See post 1.

 

[WORF84]

I tried it!
Rock solid, surprised.

Only one thing, Settings/Buttons was completely empty/white.

If you could add volume steps it would be great!

Screenshots are kinda pointless, all these 5.1.1 ROM loook the same.

Is this 5.1.1 r10?

FYI, OpenGApps Pico package (44MB) flashed fine.

 

[sameerm02]

I installed this ROM, this rom is smooth like others.

you need lp bootstack before installing this rom (I was on stock RR before this, so only wiped and directly flashed this rom)

DT2W is not working for me, it is ON in the setting but still its not working

I also tried "echo 1 >/sys/devices/virtual/input/lge_touch/firmware" but no luck.

other than this no other problems for now

Thanks dev for this ROM :good:

Edit 1: This rom is close to stock (nexus like) rom, you will not find any extra settings like blispop or rr

 

[The Marionette]

I am not quite getting it...

Is this ROM a genuinely new ROM or an boosted version of CM12.1?


Sent from my LG-D802 using XDA Forums Pro.

 

[WORF84]

I installed this ROM, this rom is smooth like others.

you need lp bootstack before installing this rom (I was on stock RR before this, so only wiped and directly flashed this rom)

DT2W is not working for me, it is ON in the setting but still its not working

I also tried "echo 1 >/sys/devices/virtual/input/lge_touch/firmware" but no luck.

other than this no other problems for now

Thanks dev for this ROM :good:

Strange, worked fine for me.
I turned it on with Kernel Adiutor, try that?
Set on enabled, set "On boot" and leave it. Even if you see it showing disabled next time you check Kernel Adiutor, don't change anything since it's activated.

 

[The Marionette]

The rom is fast and smooth.

However,its base is old.
It is based on LVY48C,while other AOSP roms are based on LVY48G

 

[sameerm02]

Strange, worked fine for me.
I turned it on with Kernel Adiutor, try that?
Set on enabled, set "On boot" and leave it. Even if you see it showing disabled next time you check Kernel Adiutor, don't change anything since it's activated.

yes, kernel aduitor is the solution for d2tw

 

[Buda1996]

Hello I am the team leader, i would like to say this a initial build as @Schneiderle is a new dev , and he is still learning as we are , this rom was made before we pushed any customizations.This rom will be completely diffrent and we hope independent as some others are.If you have any suggestions about further improvments features either pm me or make pull requests.

Also i am sorry that the web was down , now you can all access it.

Enjoy and thanks for positive support.

 

[LidaFlorida]

@Buda1996
Is it possible to add RRO support to your ROM?

Sent from my LG-D802 using XDA Free mobile app

 

[The Marionette]

@Buda1996
Is it possible to add RRO support to your ROM?

Sent from my LG-D802 using XDA Free mobile app

Stop it. You have a blazing fast RRO rom,and it is SlimSaber.

Now let us have a blazing fast CM Theme Engine rom.

 

[android extreme]

On this metallim os could we have some choice for scheduler(zen fiops) and for the governor(like smartmax and nightmare)?
It's also possible have low level code optimization like O-3 graphite floop strickt aliasing and other?
Anyway this first release is very good

 

[Buda1996]

Thank you for the feedback but as i sayd we are planing on making a own UI as by that we will have to adjust theme manager to the actual UI or themeres will have to adjust their themes.

 

[tomirodriguez]

I'd love to see some screens of the ROM. I cant find any of them here or in your web.

Thanks !

 

[Mardon]

I'd love to see some screens of the ROM. I cant find any of them here or in your web.

Thanks !

here, but ui is still wip

 

[Buda1996]

GUYS new build is up got download it at http://home.spikelaboratory.com/metallium go to devices section and download your rom zip and enjoy .

Thanks for the support.Here its amazing.

 

[WORF84]

GUYS new build is up got download it at http://home.spikelaboratory.com/metallium go to devices section and download your rom zip and enjoy .

Thanks for the support.Here its amazing.

I downloaded and I'll try it today.
I can't find the change log anywhere on the site. Can you please point to it?