[ROM][D850] CyanogenMod 12 UNOFFICIAL EXPERIMENTAL TEST BUILDS

Search This thread

AndroidUser00110001

Senior Member
Aug 16, 2011
3,430
5,739
NYC
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.

THIS IS UNOFFICIAL EXPERIMENTAL BUILDS WHICH CONTAINS CODE TO BE TESTED BEFORE IT IS MERGED INTO CM.
IF YOU WANT OFFICIAL BUILDS THEN CHECK HERE

Code:
#include 
Your warranty is now void!

I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/

Important information:
This thread is for CyanogenMod 12 opensource builds for the LG G3 (D850). The following will not be supported in this thread:
  • Custom Kernels
  • Mods
  • Modified system files
  • Xposed

Instructions:
Your device will need to be rooted and have custom recovery before proceeding. Please check your device forum for instructions.

First time flashing CyanogenMod 12 your device, or coming from another ROM?
  • Download the zip(s).
  • Install a compatible Recovery
  • Perform a NANDroid backup of your current ROM (Optional)
  • Wipe data & cache partitions of your device
  • Flash CyanogenMod.
  • Optional: Install the Google Apps add-on package.
Already on CM12, try a dirty flash.
  • Reboot into recovery
  • Make back up <optional>
  • Wipe cache, system, dalvik-cache
  • Optional: Install the Google Apps add-on package.
  • Reboot

Download: CM12 EXPERIMENTAL BUILDS - Check EXPERIMENTAL folder for your device
AndroidFileHost - HERE
BasketBuild - HERE
Goo.im - HERE

Google Apps: Optional add on package that allows Google Play services such as Google Play Store and other Google Apps outside of AOSP based ROMs.
Check THIS post

Changelog:
CyanogenMod Change Log HERE
G3 Specific Change Log HERE
D850 Specific Change Log HERE
AndroidUser00110001 Change Log HERE
invsisblek Change Log HERE

GitHub - Source Code:
GitHub - CyanogenMod
GitHub - AndroidUser00110001
GitHub - invsisblek

Credits:
Thanks to all sent Paypal!!!
CyanogenMod
Thanks to @invisiblek for the work he has done on device trees.
 
Last edited:

AndroidUser00110001

Senior Member
Aug 16, 2011
3,430
5,739
NYC
Change Log & Other info

Changelog:
2015-01-12 - In addition to the changes below. This build is currently being built and uploaded.
g3: Get rid of ctrl_interface=/data/misc/wifi/sockets http://review.cyanogenmod.org/#/c/84746/
camera: add 3840x2160 video size http://review.cyanogenmod.org/#/c/84832/
camera: set lge-camera parameter - http://review.cyanogenmod.org/#/c/84833/

2015-01-11 - This build is currently being uploaded.
In addition to the changes from 2015-01-08
Set System prop to allow proper Imsi handling - http://review.cyanogenmod.org/#/c/84293/
selinux: Fix access to the vibrator amplification sysfs - http://review.cyanogenmod.org/#/c/84770/
Camera2: Samsung 4k Camera workaround - http://review.cyanogenmod.org/#/c/83332/

Some changes may have been merged but not in latest nightly.

2015-01-08 - This build is currently being built and will be on servers in about an hour from now.
In addition to the changelog in post #1 the following code has been merged into today's EXPERIMENTAL TEST BUILD
Adjust volume for voice-speaker
Default AT&T G3 APN
d850 cleanup
sepolicy: give radio access to tap2wake node
ProximitySensorManager: disable TapToWake while we have a prox wakelock

Bugs:
Only report bugs for UNOFFICIAL EXPERIMENTAL BUILDS pertaining to new code that is listed above in the changelog. Please report if anything is broken or if fixes actually fix something. THANKS!

For proper technique on reporting bugs:
Read THIS and THIS.

When reporting a bug be as specific as possible.
Make sure you can replicate the bug when coming from a clean install with no other apps installed besides what comes with ROM and GApps.
If you narrowed down a specific app that crashes only on CM ROM then please include app version and all info about app too.
Do not have any modifications done to the Android system besides.


It is very important to read on the proper technique to report a bug. Helps keep thread clean and makes tracking issues easier.

If your D850 is not on AT&T then use this TWRP flashable patch to update the APN files.
 
Last edited:

BreakingVZW

Senior Member
Jul 7, 2012
1,059
413
Carmel
Holy crap am i first? XD

The link is just a bin file atm. Goo is being slow i guess.

---------- Post added at 09:34 AM ---------- Previous post was at 09:33 AM ----------

Lol balls. You beat me by 2 minutes.
 
  • Like
Reactions: themustached

shayneflashindaily

Senior Member
Sep 15, 2012
5,898
1,960
36
Hendersonville NC
I can't get it to download ..... Can you upload to different server ....

2SHAYNEZ

---------- Post added at 04:09 PM ---------- Previous post was at 04:06 PM ----------

I keep getting unsuccessful when trying to download.... Using chrome ...weird

2SHAYNEZ
 

Top Liked Posts

  • There are no posts matching your filters.
  • 96
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.

    THIS IS UNOFFICIAL EXPERIMENTAL BUILDS WHICH CONTAINS CODE TO BE TESTED BEFORE IT IS MERGED INTO CM.
    IF YOU WANT OFFICIAL BUILDS THEN CHECK HERE

    Code:
    #include 
    Your warranty is now void!
    
    I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
    Please do some research if you have any concerns about features included in this ROM before flashing it!
    YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/

    Important information:
    This thread is for CyanogenMod 12 opensource builds for the LG G3 (D850). The following will not be supported in this thread:
    • Custom Kernels
    • Mods
    • Modified system files
    • Xposed

    Instructions:
    Your device will need to be rooted and have custom recovery before proceeding. Please check your device forum for instructions.

    First time flashing CyanogenMod 12 your device, or coming from another ROM?
    • Download the zip(s).
    • Install a compatible Recovery
    • Perform a NANDroid backup of your current ROM (Optional)
    • Wipe data & cache partitions of your device
    • Flash CyanogenMod.
    • Optional: Install the Google Apps add-on package.
    Already on CM12, try a dirty flash.
    • Reboot into recovery
    • Make back up <optional>
    • Wipe cache, system, dalvik-cache
    • Optional: Install the Google Apps add-on package.
    • Reboot

    Download: CM12 EXPERIMENTAL BUILDS - Check EXPERIMENTAL folder for your device
    AndroidFileHost - HERE
    BasketBuild - HERE
    Goo.im - HERE

    Google Apps: Optional add on package that allows Google Play services such as Google Play Store and other Google Apps outside of AOSP based ROMs.
    Check THIS post

    Changelog:
    CyanogenMod Change Log HERE
    G3 Specific Change Log HERE
    D850 Specific Change Log HERE
    AndroidUser00110001 Change Log HERE
    invsisblek Change Log HERE

    GitHub - Source Code:
    GitHub - CyanogenMod
    GitHub - AndroidUser00110001
    GitHub - invsisblek

    Credits:
    Thanks to all sent Paypal!!!
    CyanogenMod
    Thanks to @invisiblek for the work he has done on device trees.
    81
    Change Log & Other info

    Changelog:
    2015-01-12 - In addition to the changes below. This build is currently being built and uploaded.
    g3: Get rid of ctrl_interface=/data/misc/wifi/sockets http://review.cyanogenmod.org/#/c/84746/
    camera: add 3840x2160 video size http://review.cyanogenmod.org/#/c/84832/
    camera: set lge-camera parameter - http://review.cyanogenmod.org/#/c/84833/

    2015-01-11 - This build is currently being uploaded.
    In addition to the changes from 2015-01-08
    Set System prop to allow proper Imsi handling - http://review.cyanogenmod.org/#/c/84293/
    selinux: Fix access to the vibrator amplification sysfs - http://review.cyanogenmod.org/#/c/84770/
    Camera2: Samsung 4k Camera workaround - http://review.cyanogenmod.org/#/c/83332/

    Some changes may have been merged but not in latest nightly.

    2015-01-08 - This build is currently being built and will be on servers in about an hour from now.
    In addition to the changelog in post #1 the following code has been merged into today's EXPERIMENTAL TEST BUILD
    Adjust volume for voice-speaker
    Default AT&T G3 APN
    d850 cleanup
    sepolicy: give radio access to tap2wake node
    ProximitySensorManager: disable TapToWake while we have a prox wakelock

    Bugs:
    Only report bugs for UNOFFICIAL EXPERIMENTAL BUILDS pertaining to new code that is listed above in the changelog. Please report if anything is broken or if fixes actually fix something. THANKS!

    For proper technique on reporting bugs:
    Read THIS and THIS.

    When reporting a bug be as specific as possible.
    Make sure you can replicate the bug when coming from a clean install with no other apps installed besides what comes with ROM and GApps.
    If you narrowed down a specific app that crashes only on CM ROM then please include app version and all info about app too.
    Do not have any modifications done to the Android system besides.


    It is very important to read on the proper technique to report a bug. Helps keep thread clean and makes tracking issues easier.

    If your D850 is not on AT&T then use this TWRP flashable patch to update the APN files.
    51
    BT Incall is fixed. Will have a new build up in an hour or so.

    invisiblek gave me OK to be the official maintainer for D850 on CM12 :)

    Thanks everyone!

    Happy Thanksgiving!!!
    41
    Hi Everyone,
    Just wanted to wish everyone a Happy Thanksgiving. I am off from my main job now until Monday and I am contemplating if I should take off from my second job which is optional anyways but the extra money does not hut. I am thinking of taking off and trying to get the hardware issues fixed up with some of the other devs that are working on different versions of the G3.

    Can we follow some simple guidelines and I will also include this in the first or second post.

    If you are posting a bug please make sure you are on current build. If bug has not been talked about before than can you only report if you did a clean install.

    There are two parts of this ROM, the CM side which CM is responsible for the Android software side and the hardware side where a few dedicated people are working on so for now it would be best to just talk about the hardware side. I noted all the recommended CM stuff to add and they will be added eventually. There is a reason why they have not been merged yet so I want to stick with what has been merged so far to eliminate any issues. For example, last night we tried out a few different things and were left with a setup that would not build so it is almost like starting fresh again. At this point some stuff is moving so fast that it is hard to keep up with.

    I need a small break for a couple of hours and then I will be back at this later tonight and through the long holiday weekend.

    Thanks everyone!
    28
    I think it might be time to ask @TonyStark to delete all the messages in this thread and start new since about 95% of the major issues have been cleared....

    I am taking tonight off guys...Enjoy whatever CM merges for tomorrow's ROM.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone