• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Rom] Elephone U Pro StockRom 20180511 ( unofficial)

Search This thread

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Elephone U Pro Stock Rom Build 20180511

you need:

1. QPST flashtools (qualcomm)
2. Qualcomm Drivers for the Device
3. a firehose file for SDM660
4. rawprogram_unsparse and patch0.xml
5.ADB (newest ADB files are in the zip) . copy the "adb" folder to C:/

i uploaded all here:
Stock 20180511 Build. : https://mega.nz/#!W4J1mBab!rguDmVnnla-K1E-2GLxJRW2JWgUGwFRj6dkAvjeXIjw
Tool files: https://1drv.ms/u/s!Am93l3qEx-D_hJZkbGtGSG6MEbVCmQ


How To:
extract the downloaded zip files
1. install QPST/QFIL Flashtools and place adb to C:/
2. Install drivers ( qualcom drivers. make sure that they dont interrupt with other device drivers you have .)

enable usb debugging in developer settings
you have to reboot your device into edl mode by
Code:
C:\>cd adb
adb shell
reboot edl
phone will reboot to edl mode ( black screen, no led)

Now check your device manager . the COM & LTP port should show "Qualcomm HS-USB QDLoader 9008"
if not then update the driver and choose it from your internal list. or google for it

if the driver is fine, open the QPST/QFIL FLashtool in

Code:
C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe
prepare the Flashtool:

in Select Build Type:
choose: Flat Build

in Select Programmer:
browse and choose the "prog_emmc_ufs_firehose_Sdm660_ddr.elf" file
( you cant see it change to "all files" )

Load XML:
now choose the rawprogram_unsparse.xml and right after the patch0.xml

you can press the "download button"

wait a bit , at the end of the flashing procedure it will make an error, thats normal because i left the patch0.xml empty.

after all disconnect the cable and hold Power button a few seconds. phone will reboot .
the build is without userdata that means it will be Stock and like a factory reset.

enjoy
 
Last edited:

bzoli72

Member
Feb 23, 2015
11
2
Hi!

How to upgrade from 20180423 Stock rom to 20180511 Stock rom without data lost?
Or how to upgrade from internal storage?

Thanks: bzoli72
 

olajbogyo

Member
Apr 12, 2018
32
6
Hi Skeleton 1911!

Hello!

Can you tell me what is the difference between 20180423 Stock Rom, and 20180511 Stock Rom?
What are the changes in it?
If there is not much difference then I will not change it. I would only update it if there were some very important innovation in it.

Thanks.
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Hello!

Can you tell me what is the difference between 20180423 Stock Rom, and 20180511 Stock Rom?
What are the changes in it?
If there is not much difference then I will not change it. I would only update it if there were some very important innovation in it.

Thanks.
Better camera. Fingerprint faster.
Optimized system. New security patch of may

Gesendet von meinem U_Pro mit Tapatalk
 
  • Like
Reactions: [email protected]

xdaONLINEuser

Member
Apr 30, 2018
7
2
Hello,

i update my U Pro with the StockRom 20180511, so far so good.
After the Update, i try to lock the Bootloader.

adb Shell
reboot Bootloader
fastboot flashing lock

Error:

FAILED (remote: unknown command)
finished.


What make i wrong :)
Thank you for help!
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Hello,

i update my U Pro with the StockRom 20180511, so far so good.
After the Update, i try to lock the Bootloader.

adb Shell
reboot Bootloader
fastboot flashing lock

Error:

FAILED (remote: unknown command)
finished.


What make i wrong :)
Thank you for help!
Nothing.
Not possible to lock it. It's weird that Elephone made it like that.
Only 2018227 base let you lock/unlock it. But no Fastboot CMD.
Newer builds have Fastboot . But you can't lock/unlock.it.
Lol

But an unlocked bootloader isn't a problem. There is no different. Even bank apps should work


Gesendet von meinem U_Pro mit Tapatalk
 
  • Like
Reactions: xdaONLINEuser

xdaONLINEuser

Member
Apr 30, 2018
7
2
Nothing.
Not possible to lock it. It's weird that Elephone made it like that.
Only 2018227 base let you lock/unlock it. But no Fastboot CMD.
Newer builds have Fastboot . But you can't lock/unlock.it.
Lol

But an unlocked bootloader isn't a problem. There is no different. Even bank apps should work


Gesendet von meinem U_Pro mit Tapatalk

Thank you :cool:
Is it possible to flash back to 20180227 without losing the IMEI / Baseband settings?
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Thank you :cool:
Is it possible to flash back to 20180227 without losing the IMEI / Baseband settings?
You only want to lock the bootloader.
Then just flash via ADB Fastboot the abl.img of 0227
After lock it and go to edl mode , then flash the rom you want.
That would be the steps. But there is a little problem :D

The new builds are all with unlocked bootloader. Because
Otherwise for me it was not possible to take out the firmware dump. So when you flash a newer build. The abl.img would be unlocked again....

I didn't tried that:
Just replace (copy and paste) the abl.img .
Copy 0227 abl.img to 0511 folder on pc. And flash the rom with qfil again. After that reboot and go back to bootloader to lock it...
Report back if that works.
( Lock bootloader means you don't need Fastboot etc anyway, so that could be a solution, if it works.)


In newer ota /firmware updates I will try to lock it again

Gesendet von meinem U_Pro mit Tapatalk
 
Last edited:
  • Like
Reactions: xdaONLINEuser

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Also .
I edited the first post of 20180227 stock ROM

(to prevent losing IMEI do this:
Open the raw_programm.xml and search for modemst1 and modemst2 . Remove those lines. And save. Then go forward)

That's all . Then qfil will not flash these images and IMEI is save

Gesendet von meinem U_Pro mit Tapatalk
 

xdaONLINEuser

Member
Apr 30, 2018
7
2
You only want to lock the bootloader.
Then just flash via ADB Fastboot the abl.img of 0227
After lock it and go to edl mode , then flash the rom you want.
That would be the steps. But there is a little problem :D

The new builds are all with unlocked bootloader. Because
Otherwise for me it was not possible to take out the firmware dump. So when you flash a newer build. The abl.img would be unlocked again....

I didn't tried that:
Just replace (copy and paste) the abl.img .
Copy 0227 abl.img to 0511 folder on pc. And flash the rom with qfil again. After that reboot and go back to bootloader to lock it...
Report back if that works.
( Lock bootloader means you don't need Fastboot etc anyway, so that could be a solution, if it works.)


In newer ota /firmware updates I will try to lock it again

Gesendet von meinem U_Pro mit Tapatalk

Report back if that works…
:cowboy: it works!

copy and paste abl_a.img + abl_b.img
 
  • Like
Reactions: skeleton1911

bzoli72

Member
Feb 23, 2015
11
2

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Thanks for sharing.
I have those already a few days ago.

Look here at my thread at Android Hilfe.
https://www.android-hilfe.de/forum/...ephone-u-pro-auf-20180511-bringen.876177.html

Gesendet von meinem U_Pro mit Tapatalk
 
  • Like
Reactions: [email protected]

Cezary.b

New member
Nov 15, 2016
1
1
zmieniłem na wersje 511 ale co ona tak naprawdę daje nie widzę różnicy

aparat fotograficzny jak był bardzo zły tak został
jedynie widzę że lepiej działa identyfikacja palcem
pojawił się problem z googlepay ponieważ telefon jest zrootowany i google to wykrywa i nie można płacić telefonem:(:(:(:(:(:(
 
  • Like
Reactions: skeleton1911

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
zmieniłem na wersje 511 ale co ona tak naprawdę daje nie widzę różnicy

aparat fotograficzny jak był bardzo zły tak został
jedynie widzę że lepiej działa identyfikacja palcem
pojawił się problem z googlepay ponieważ telefon jest zrootowany i google to wykrywa i nie można płacić telefonem:(:(:(:(:(:(
Next time answer in English!!
Use a translator for it.

To your post

1. In 511 you have fingerprint improvement and system stability is better.

2. You have to look the bootloader
Look here , I have made a thread for that.
https://forum.xda-developers.com/android/general/guide-elephone-pro-how-to-lock-unlock-t3799667
(Just flash that abl.img with qfil flash tools and relock it via adb command....)

P.s
Also wipe the data of the Google play store and services
In settings/apps.
after you locked the bootloader..


Gesendet von meinem U_Pro mit Tapatalk
 

olajbogyo

Member
Apr 12, 2018
32
6
Hi, Skeleton1911!

Hello!

I have a comment. This version can not be rooted. That is, it may be, but then the wifi network disappears and can not be switched on.
If I put back the original boot.img file then there is a wifi network but it is not rooted. I tried it several times but the above result was generated.
Do you know how to fix it or are you already rooting this rom version?

Thanks.
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Hello!

I have a comment. This version can not be rooted. That is, it may be, but then the wifi network disappears and can not be switched on.
If I put back the original boot.img file then there is a wifi network but it is not rooted. I tried it several times but the above result was generated.
Do you know how to fix it or are you already rooting this rom version?

Thanks.
Yes.
1. Place boot.img to storage
2. Install magisk manager
3. Magisk manager/install/choose file
4. Select boot.img
5. Take out the patched_boot.img from magsik folder on storage
6. Flash it via Fastboot.

Done

Gesendet von meinem U_Pro mit Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Elephone U Pro Stock Rom Build 20180511

    you need:

    1. QPST flashtools (qualcomm)
    2. Qualcomm Drivers for the Device
    3. a firehose file for SDM660
    4. rawprogram_unsparse and patch0.xml
    5.ADB (newest ADB files are in the zip) . copy the "adb" folder to C:/

    i uploaded all here:
    Stock 20180511 Build. : https://mega.nz/#!W4J1mBab!rguDmVnnla-K1E-2GLxJRW2JWgUGwFRj6dkAvjeXIjw
    Tool files: https://1drv.ms/u/s!Am93l3qEx-D_hJZkbGtGSG6MEbVCmQ


    How To:
    extract the downloaded zip files
    1. install QPST/QFIL Flashtools and place adb to C:/
    2. Install drivers ( qualcom drivers. make sure that they dont interrupt with other device drivers you have .)

    enable usb debugging in developer settings
    you have to reboot your device into edl mode by
    Code:
    C:\>cd adb
    adb shell
    reboot edl
    phone will reboot to edl mode ( black screen, no led)

    Now check your device manager . the COM & LTP port should show "Qualcomm HS-USB QDLoader 9008"
    if not then update the driver and choose it from your internal list. or google for it

    if the driver is fine, open the QPST/QFIL FLashtool in

    Code:
    C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe
    prepare the Flashtool:

    in Select Build Type:
    choose: Flat Build

    in Select Programmer:
    browse and choose the "prog_emmc_ufs_firehose_Sdm660_ddr.elf" file
    ( you cant see it change to "all files" )

    Load XML:
    now choose the rawprogram_unsparse.xml and right after the patch0.xml

    you can press the "download button"

    wait a bit , at the end of the flashing procedure it will make an error, thats normal because i left the patch0.xml empty.

    after all disconnect the cable and hold Power button a few seconds. phone will reboot .
    the build is without userdata that means it will be Stock and like a factory reset.

    enjoy
    1
    Hello!

    Can you tell me what is the difference between 20180423 Stock Rom, and 20180511 Stock Rom?
    What are the changes in it?
    If there is not much difference then I will not change it. I would only update it if there were some very important innovation in it.

    Thanks.
    Better camera. Fingerprint faster.
    Optimized system. New security patch of may

    Gesendet von meinem U_Pro mit Tapatalk
    1
    Hello,

    i update my U Pro with the StockRom 20180511, so far so good.
    After the Update, i try to lock the Bootloader.

    adb Shell
    reboot Bootloader
    fastboot flashing lock

    Error:

    FAILED (remote: unknown command)
    finished.


    What make i wrong :)
    Thank you for help!
    Nothing.
    Not possible to lock it. It's weird that Elephone made it like that.
    Only 2018227 base let you lock/unlock it. But no Fastboot CMD.
    Newer builds have Fastboot . But you can't lock/unlock.it.
    Lol

    But an unlocked bootloader isn't a problem. There is no different. Even bank apps should work


    Gesendet von meinem U_Pro mit Tapatalk
    1
    Thank you :cool:
    Is it possible to flash back to 20180227 without losing the IMEI / Baseband settings?
    You only want to lock the bootloader.
    Then just flash via ADB Fastboot the abl.img of 0227
    After lock it and go to edl mode , then flash the rom you want.
    That would be the steps. But there is a little problem :D

    The new builds are all with unlocked bootloader. Because
    Otherwise for me it was not possible to take out the firmware dump. So when you flash a newer build. The abl.img would be unlocked again....

    I didn't tried that:
    Just replace (copy and paste) the abl.img .
    Copy 0227 abl.img to 0511 folder on pc. And flash the rom with qfil again. After that reboot and go back to bootloader to lock it...
    Report back if that works.
    ( Lock bootloader means you don't need Fastboot etc anyway, so that could be a solution, if it works.)


    In newer ota /firmware updates I will try to lock it again

    Gesendet von meinem U_Pro mit Tapatalk
    1
    You only want to lock the bootloader.
    Then just flash via ADB Fastboot the abl.img of 0227
    After lock it and go to edl mode , then flash the rom you want.
    That would be the steps. But there is a little problem :D

    The new builds are all with unlocked bootloader. Because
    Otherwise for me it was not possible to take out the firmware dump. So when you flash a newer build. The abl.img would be unlocked again....

    I didn't tried that:
    Just replace (copy and paste) the abl.img .
    Copy 0227 abl.img to 0511 folder on pc. And flash the rom with qfil again. After that reboot and go back to bootloader to lock it...
    Report back if that works.
    ( Lock bootloader means you don't need Fastboot etc anyway, so that could be a solution, if it works.)


    In newer ota /firmware updates I will try to lock it again

    Gesendet von meinem U_Pro mit Tapatalk

    Report back if that works…
    :cowboy: it works!

    copy and paste abl_a.img + abl_b.img