• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Rom] Elephone U Pro StockRom 20180511 ( unofficial)

Search This thread

olajbogyo

Member
Apr 12, 2018
32
6
Hi, Skeleton1911!

Hello! I did it as you wrote it. I was restarted at point 6 with fastboot. It started again. Wifi is there, but there is no root. I did something wrong? What kind of root boot.img file should I copy? Maybe that's bad.
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Hello! I did it as you wrote it. I was restarted at point 6 with fastboot. It started again. Wifi is there, but there is no root. I did something wrong? What kind of root boot.img file should I copy? Maybe that's bad.
After you used magisk manager to patch the boot.img
Look into your internal storage. There is a magisk folder with the patched_boot.img in it. You have to flash that patched boot.img via Fastboot.

Gesendet von meinem U_Pro mit Tapatalk
 

olajbogyo

Member
Apr 12, 2018
32
6
Hi, Skeleton1911!

Ahan! :) I can see the patched_boot.img file created by the phone, the Magisk Manager. But now what and how should I do that? If I start the Fastboot command, it just restarts the phone but does not install anything. I can get it wrong.
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Ahan! :) I can see the patched_boot.img file created by the phone, the Magisk Manager. But now what and how should I do that? If I start the Fastboot command, it just restarts the phone but does not install anything. I can get it wrong.
Place that patched_boot.img into your adb folder.
Then Reboot to bootloader.
Open a "CMD" and browse to your adb folder
Then write
Fastboot flash boot patched_boot.img
Reboot
Done


Gesendet von meinem U_Pro mit Tapatalk
 

olajbogyo

Member
Apr 12, 2018
32
6
Hi, Skeleton1911!

No. I use 20180510. Would that be the source of trouble? How can I send a screen image and do it? How do I upgrade to 20180511?
 

olajbogyo

Member
Apr 12, 2018
32
6
Hi, Skeleton1911!

No wifi! I can not see OTA. And if I manually install that 2 pieces. zip file you wrote? But I try the other option.

---------- Post added at 02:38 PM ---------- Previous post was at 02:32 PM ----------

So now 20180511 is the version! Super! Wifi is. Super! There is no root right! Not super! :( My next assignment?
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
No wifi! I can not see OTA. And if I manually install that 2 pieces. zip file you wrote? But I try the other option.

---------- Post added at 02:38 PM ---------- Previous post was at 02:32 PM ----------

So now 20180511 is the version! Super! Wifi is. Super! There is no root right! Not super! :( My next assignment?
Let me explain . Because you are on slot a with 20280510 build . You just patched the slot a boot.img

Now you need to patch the boot.img of slot b again.
The steps above with magisk manager... Do them again. And with Fastboot flash the new patched boot.img then

Gesendet von meinem U_Pro mit Tapatalk
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
I updated from 20180423 and it works, thx @skeleton1911
next time i tried your rom

i deleted modema and modemb in Stock 20180511\rawprogram_unsparse.xml i hope it was correct
This is only necessary in 20180227 .
20180511will not delete IMEI...

And it is modemst1.img and modemst2.img
Not modem_a and modem_b. and IMG.
That are the images for wlan/WiFi.
Would be good to also update them . Flash it again [emoji14]

Gesendet von meinem U_Pro mit Tapatalk
 
  • Like
Reactions: unosweb

Dathens

Member
Jul 5, 2018
11
1
What is the latest update?

The phone is Excellent but still there are some bugs like sometimes the the phone dies and you need to hard reset it to make it work again and the camera issue not very fast especially in low lighting when is elephone going to improve this ? Is this rom the latest one because every time I try to update it says the telephone is up to date thank you
 

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
The phone is Excellent but still there are some bugs like sometimes the the phone dies and you need to hard reset it to make it work again and the camera issue not very fast especially in low lighting when is elephone going to improve this ? Is this rom the latest one because every time I try to update it says the telephone is up to date thank you
This is the latest stock ROM for now

Gesendet von meinem U_Pro mit Tapatalk
 

Dathens

Member
Jul 5, 2018
11
1
Thank u for the fast response if I switch to eragon will i lose all data ?
Will eragon solve the issues ? What root will Improve ?
I still do not get eragon people why abandon such a nice hardware ? They could lead the market ....
I have installed localy the one from april 20th the rom from may gave me errors before attempting to install it ..... will now the phone get updates OTA or do I have still to do this manually ?
 
Last edited:

skeleton1911

Senior Member
May 4, 2012
10,488
14,763
münster
Thank u for the fast response if I switch to eragon will i lose all data ?
Will eragon solve the issues ? What root will Improve ?
I still do not get eragon people why abandon such a nice hardware ? They could lead the market ....
I have installed localy the one from april 20th the rom from may gave me errors before attempting to install it ..... will now the phone get updates OTA or do I have still to do this manually ?
Try my Eragon and you will be fine I think. :)
You can choose "without wipe " and don't lose data

Gesendet von meinem U_Pro mit Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Elephone U Pro Stock Rom Build 20180511

    you need:

    1. QPST flashtools (qualcomm)
    2. Qualcomm Drivers for the Device
    3. a firehose file for SDM660
    4. rawprogram_unsparse and patch0.xml
    5.ADB (newest ADB files are in the zip) . copy the "adb" folder to C:/

    i uploaded all here:
    Stock 20180511 Build. : https://mega.nz/#!W4J1mBab!rguDmVnnla-K1E-2GLxJRW2JWgUGwFRj6dkAvjeXIjw
    Tool files: https://1drv.ms/u/s!Am93l3qEx-D_hJZkbGtGSG6MEbVCmQ


    How To:
    extract the downloaded zip files
    1. install QPST/QFIL Flashtools and place adb to C:/
    2. Install drivers ( qualcom drivers. make sure that they dont interrupt with other device drivers you have .)

    enable usb debugging in developer settings
    you have to reboot your device into edl mode by
    Code:
    C:\>cd adb
    adb shell
    reboot edl
    phone will reboot to edl mode ( black screen, no led)

    Now check your device manager . the COM & LTP port should show "Qualcomm HS-USB QDLoader 9008"
    if not then update the driver and choose it from your internal list. or google for it

    if the driver is fine, open the QPST/QFIL FLashtool in

    Code:
    C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe
    prepare the Flashtool:

    in Select Build Type:
    choose: Flat Build

    in Select Programmer:
    browse and choose the "prog_emmc_ufs_firehose_Sdm660_ddr.elf" file
    ( you cant see it change to "all files" )

    Load XML:
    now choose the rawprogram_unsparse.xml and right after the patch0.xml

    you can press the "download button"

    wait a bit , at the end of the flashing procedure it will make an error, thats normal because i left the patch0.xml empty.

    after all disconnect the cable and hold Power button a few seconds. phone will reboot .
    the build is without userdata that means it will be Stock and like a factory reset.

    enjoy
    1
    Hello!

    Can you tell me what is the difference between 20180423 Stock Rom, and 20180511 Stock Rom?
    What are the changes in it?
    If there is not much difference then I will not change it. I would only update it if there were some very important innovation in it.

    Thanks.
    Better camera. Fingerprint faster.
    Optimized system. New security patch of may

    Gesendet von meinem U_Pro mit Tapatalk
    1
    Hello,

    i update my U Pro with the StockRom 20180511, so far so good.
    After the Update, i try to lock the Bootloader.

    adb Shell
    reboot Bootloader
    fastboot flashing lock

    Error:

    FAILED (remote: unknown command)
    finished.


    What make i wrong :)
    Thank you for help!
    Nothing.
    Not possible to lock it. It's weird that Elephone made it like that.
    Only 2018227 base let you lock/unlock it. But no Fastboot CMD.
    Newer builds have Fastboot . But you can't lock/unlock.it.
    Lol

    But an unlocked bootloader isn't a problem. There is no different. Even bank apps should work


    Gesendet von meinem U_Pro mit Tapatalk
    1
    Thank you :cool:
    Is it possible to flash back to 20180227 without losing the IMEI / Baseband settings?
    You only want to lock the bootloader.
    Then just flash via ADB Fastboot the abl.img of 0227
    After lock it and go to edl mode , then flash the rom you want.
    That would be the steps. But there is a little problem :D

    The new builds are all with unlocked bootloader. Because
    Otherwise for me it was not possible to take out the firmware dump. So when you flash a newer build. The abl.img would be unlocked again....

    I didn't tried that:
    Just replace (copy and paste) the abl.img .
    Copy 0227 abl.img to 0511 folder on pc. And flash the rom with qfil again. After that reboot and go back to bootloader to lock it...
    Report back if that works.
    ( Lock bootloader means you don't need Fastboot etc anyway, so that could be a solution, if it works.)


    In newer ota /firmware updates I will try to lock it again

    Gesendet von meinem U_Pro mit Tapatalk
    1
    You only want to lock the bootloader.
    Then just flash via ADB Fastboot the abl.img of 0227
    After lock it and go to edl mode , then flash the rom you want.
    That would be the steps. But there is a little problem :D

    The new builds are all with unlocked bootloader. Because
    Otherwise for me it was not possible to take out the firmware dump. So when you flash a newer build. The abl.img would be unlocked again....

    I didn't tried that:
    Just replace (copy and paste) the abl.img .
    Copy 0227 abl.img to 0511 folder on pc. And flash the rom with qfil again. After that reboot and go back to bootloader to lock it...
    Report back if that works.
    ( Lock bootloader means you don't need Fastboot etc anyway, so that could be a solution, if it works.)


    In newer ota /firmware updates I will try to lock it again

    Gesendet von meinem U_Pro mit Tapatalk

    Report back if that works…
    :cowboy: it works!

    copy and paste abl_a.img + abl_b.img