• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM]EMUI 10.1 dload FW for Huawei P30 Pro updated on 03.12.2020

Search This thread

oslo83

Senior Member
I am on 10.1.0.150 and dont get any update. The Update Manager says that the Software is up to date. Is it possible that im to low to get the EMUI 11 update ? On http://huawei-update.com there is an update folder for EMUI 11 but the Method they use (Update via UPDATE.APP doesnt work for me.
This site is unreliable. It's just a scam.
You don't get ota anymore because 10.1.0.150 is not right build for your device's regioncountry, or because you are with wrong cust and preload version for that region.
As your bootrom was updated previously to emui11, usb does not work anymore when downgraded.
Wait for emui11 dload OFFLINE package to be available and flash them with a Nimcard, or usbotg if it still works.
 

Trenox

Member
Oct 11, 2021
11
0
This site is unreliable. It's just a scam.
You don't get ota anymore because 10.1.0.150 is not right build for your device's regioncountry, or because you are with wrong cust and preload version for that region.
As your bootrom was updated previously to emui11, usb does not work anymore when downgraded.
Wait for emui11 dload OFFLINE package to be available and flash them with a Nimcard, or usbotg if it still works.
Thanks for the reply.
Okay, i already read about the USB Problem. Waiting for the dload files might be my only Chance. The only thing to update that works is via otg. At least i stuck with a firmware wich doesnt drain my battery like it emui11 did.
 

melodystyle2003

Senior Member
Aug 1, 2004
417
123
www.geocities.com
@Trenox "I am on 10.1.0.150 and dont get any update. The Update Manager says that the Software is up to date. Is it possible that im to low to get the EMUI 11 update ? On http://huawei-update.com there is an update folder for EMUI 11 but the Method they use (Update via UPDATE.APP doesnt work for me."

Can you not find the 10.0.0161 and use the update via micro sd card in recovery? I do have it stored in my pc (for the Huawei p30 pro (l29c431) HW version), if you can not find it let me know in case you wanna give it a try.
 

onccaldas

New member
Oct 26, 2021
2
0
Hi, I'm using a translator, I don't know English. excuse me. I have a huawei p30 pro vog-l04, carrier cus C25, can I change it to c605 or VOG-L29 to receive updates please?


WhatsApp Image 2021-10-26 at 2.31.06 PM.jpeg
 

Trenox

Member
Oct 11, 2021
11
0
@Trenox "I am on 10.1.0.150 and dont get any update. The Update Manager says that the Software is up to date. Is it possible that im to low to get the EMUI 11 update ? On http://huawei-update.com there is an update folder for EMUI 11 but the Method they use (Update via UPDATE.APP doesnt work for me."

Can you not find the 10.0.0161 and use the update via micro sd card in recovery? I do have it stored in my pc (for the Huawei p30 pro (l29c431) HW version), if you can not find it let me know in case you wanna give it a try.
If you have a working dload update wich i can use with recovery i would give it a try.
 

Razv07

New member
Oct 5, 2021
4
0
I am on 10.1.0.150 and dont get any update. The Update Manager says that the Software is up to date. Is it possible that im to low to get the EMUI 11 update ? On http://huawei-update.com there is an update folder for EMUI 11 but the Method they use (Update via UPDATE.APP doesnt work for me.
Hey, I install via USB version 10.1.0.150 and I have the same problem like you,
I solve it by updating
If you have a working dload update wich i can use with recovery i would give it a try.
You don't have to use a dload, just turn off your phone, push volume up and power, select update by recovery mode, your phone will connect to a wifi and download automatically and install a new version
 

Trenox

Member
Oct 11, 2021
11
0
Hey, I install via USB version 10.1.0.150 and I have the same problem like you,
I solve it by updating

You don't have to use a dload, just turn off your phone, push volume up and power, select update by recovery mode, your phone will connect to a wifi and download automatically and install a new version
I tryd that and the P30 Pro wants to download the current version (10.1.0.161) again. Maybe then will the OTA Update come ?
EDIT: Oh wait my current version is 10.1.0.150. Is there a change that the OTA Updates will come ?
 

Trenox

Member
Oct 11, 2021
11
0
Hi, a little update.
I used the Update over Wifi Funktio in the eRecovery and now im back on the latest firmware.
USB Functions are also back..
Thanks for the Help :)
 

aponc

Member
Jan 21, 2016
6
0
Hi,
I bought P30 Pro VOG-L29 pro and found out that SIM 1 was blacklisted but SIM 2 wasnt. I can use the phone with one SIM only but there is few other things which are not working.
1. It doesnt do system updates. It stucked with firmaware 10.1 and whatever i try it wont update. I thought i use dload method to update but it fails every time.
2. My PC doesnt recognise it at all, when i connect the phone its charging but nothing else. Hisuite doesnt see it either.
3. Fast charging doesnt work (original charger and cable)
Any ideas how to fix it?
cheers
 

haitham0

Member
Apr 12, 2019
5
0
Apps & Games
Huawei Nexus 6P
Hi,
I bought P30 Pro VOG-L29 pro and found out that SIM 1 was blacklisted but SIM 2 wasnt. I can use the phone with one SIM only but there is few other things which are not working.
1. It doesnt do system updates. It stucked with firmaware 10.1 and whatever i try it wont update. I thought i use dload method to update but it fails every time.
2. My PC doesnt recognise it at all, when i connect the phone its charging but nothing else. Hisuite doesnt see it either.
3. Fast charging doesnt work (original charger and cable)
Any ideas how to fix it?
cheers
Go to previous page's 84 , 83 , someone had the same issue and found a solution
 

Top Liked Posts

  • There are no posts matching your filters.
  • 43
    Hi fellows xda'ians,

    I've made this thread in order to have a clean and updated one with links for latest dload firmware, info, changelog & other guides. I will keep updating this OP with newest dload firmware ONLY for EMUI 10.1. To decompress ANY firmware file that has .EF extension, use EF File Extractor v7.4

    Latest firmware was added on 03.12.2020 for VOG-L29 C431 v10.1.0.179, with OCTOBER SP as changelog.

    USING dload FW in order to update your device WILL DO A FULL WIPE & ERASE YOUR INTERNAL MEMORY, SO DON'T FORGET TO BACKUP BEFORE using Huawei HiSuite! Also, I'm not responsible for bricked devices! READ BEFORE PROCEEDING & BE SURE YOU HAVE THE RIGHT dload firmware according to your needs!​

    Huawei P30 PRO VOG-L29 C431 v10.1.0.179
    GDRIVE
    VOGUE-L29C 10.1.0.179(C431E23R2P5)_Firmware_EMUI10.1.0_05017BHV online

    Huawei P30 PRO VOG-L29 C461 v10.1.0.163
    androidhost.ru
    VOGUE-L29C 10.1.0.163(C461E12R3P1) FIRMWARE EMUI10.1.0 05015SYC online

    Huawei P30 PRO VOG-L09 C431 v10.1.0.150
    GDRIVE
    VOGUE-L09C 10.1.0.150(C431E19R2P5)_Firmware_EMUI10.1.0_05016TKC online

    Huawei P30 PRO VOG-L29 C432 v10.1.0.150
    GDRIVE
    VOGUE-L29C 10.1.0.150(C432E19R2P5)_Firmware_EMUI10.1.0_05015SFW online

    Huawei P30 PRO VOG-L29 C10 v10.1.0.151
    androidhost.ru
    VOGUE-L29C 10.1.0.151(C10E11R5P1) FIRMWARE EMUI10.1.0 05015SPM online.

    Huawei P30 PRO VOG-L04D C25 (CLARO) v10.1.0.141
    GDRIVE
    VOGUE-L04D 10.1.0.141(C25E18R1P3)_Firmware_EMUI10.1.0_05015TJP online
    -------------------------------------------------------------------------------------------------------------------------------------------------------
    Following this guide for VOG-L04 users you will find out how to flash on a carrier branded device using a different cust firmware, shared by @oremor305 and reconfirmed by @cre4per for working on a VOG-L04 C792 cust.

    If you need to revive
    a softbricked device (bootloader depending), follow post #463. This method is working also for devices with C900 cust.

    HOW TO flash dload FW:

    UPGRADE USING OTG ADAPTER or OTG CABLE + USB MEMORY STICK
    1. Extract dload folder from downloaded archive above (dload folder with all 3 zips inside) and copy to your memory stick / drive (formatted as exFat or NTFS) that will be used to upgrade
    2. BACKUP your stuffs if you haven't done yet
    3. Factory Reset your phone (optional) and POWER it OFF
    4. Insert your OTG + memory stick / drive with the right firmware on it (dload folder with all 3 zips inside)
    5. ON EMUI 10 enter eRecovery by pressing POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.

    UPGRADE USING Huawei NM Card
    1. Extract dload folder from downloaded archive above (dload folder with all 3 zips inside) and copy to your Huawei NM Card
    2. BACKUP your stuffs if you haven't done yet
    3. Factory Reset your phone (optional) and POWER it OFF
    4. ON EMUI 10 enter eRecovery by pressing POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.

    OR

    If you want to do it from sistem after you've made your backup and had an Factory Reset (optional), insert OTG + memory stick / drive OR copy dload folder with all 3 zips inside to your Huawei NM Card and dial this code on dialer *#*#2846579#*#* then select 4.Software Update then 1.Memory card Upgrade . If your inserted card / memory stick or USB drive or Huawei NM Card it's recognised and has the right files, your phone will restart & start flashing the firmware. At the end after succesfully flashed firmware, you can remove the OTG (if you used one).

    How to check for update using eRecovery on EMUI 10 / 10.1 :

    It doesn't require a cable plugged in and using this method in order to update WON'T wipe your phone data, it's acting like an normal OTA. In order to acces eRecovery, Power OFF your device or Restart it. Press then simultaneously POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select eRecovery mode then Update and recover system then Download update and recover. Connect it to Wi-Fi and it should start the update. If it's still the version you're atm, you can hit Cancel and then Restart. If it's a newer version than the one installed, let it download and update. At the end, it will restart to system.

    Clean and succesfully flashings, guys & keep in mind that you can donate me in order to maintain this thread alive or if my firmwares helped you or you just appreciate my work @xda :highfive:
    12
    CHANGELOG for VOG-L029 C431 v10.1.0.179

    This update improves system security with Android security patches.

    [Security]

    Integrates Android security patches released in October 2020 for improved system security.
    For more information on the security of Huawei EMUI system updates, please visit the official Huawei website: https://consumer.huawei.com/en/support/bulletin/2020/10/

    Update notes:
    1. This update will not erase your personal data, but we recommend that you back up any important data before updating.
    2. If you encounter any issues during the update, please call the Huawei customer service hotline or visit a Huawei customer service center for assistance.

    ______________________________________________________________________________________________________________________
    10
    IF you want to remove ads and you have no root or don't wan't to block your VPN or use Blokada, you can use my trick, it works on both WI-FI and mobile networks, as good as Adaway is doing :
    Just set: Settings > Wi-Fi & Internet > Private DNS > dns.adguard.com OR dot-de.blahdns.com then press Save & enjoy ad free browsing without any additional app. These are secure DNS servers that have integrated ad blocking. Adguard is a Russian company, blahdns is a small hobby project with a good history.

    Extra step for Chrome users:
    - Open Chrome, type in chrome://flags, search for async DNS resolver (#enable-async-dns) and choose disabled in the drop down menu, otherwise Chrome could use a built in dns resolver which does not block ads.
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    In order to remove Huawei bloatware (and get a better battery lifetime) without root access and using ADB & USB Debugging, please check my thread from the link bellow:

    Remove Huawei Bloatware Without Root Access - using ADB & USB Debugging
    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    As a comprehensive battery optimization mini guide to achieve the best possible SOT's on Huawei phones go to Settings/Battery/App launch and disable the app or give permission to the app you need to run in background (ex. NOT working in background Netflix is set to Managed manually with NO Auto-launch, NO Secondary launch and NO Run in background; WORKING AUTO - OUTLOOK - Manage automatically). Next you can customize notifications separately for any customisable app in own settings.
    9
    HOW TO REVIVE softbricked & flash for C900 CUST + demo devices (bootloader depending)

    In order to succeed, you will need to do as i wrote bellow! You can flash 3 times by replacing second and third time the dload folder from USB device or you can use 3 exFAT formatted USB devices, as you wish. Before proceeding, make sure that you have 3 dload folder with ONLY 3 zips inside (the ones extracted from my firmware, v186 for VOG-L29 C431 or VOG-L09 C431, depending on device).

    FIRST folder to be used NEEDS NO MODIFICATIONS AT ALL, just do step 1 from bellow!
    1. FIRST TIME FLASH the dload folder ORIGINAL, just as is from the extracted firmware - dload folder with all 3 zips files inside as following:
    update_sd_base.zip (4207731 KB)
    update_sd_cust_VOG-L29_hw_eea.zip (37 KB)
    update_sd_preload_VOG-L29_hw_eea_R2.zip (206751 KB)
    It will end up succesfully, but with softbrick.

    SECOND dload folder do as step 2 bellow then flash it (copy the dload folder and replace the one used on step 1 if you are using the same USB device)
    2. SECOND TIME RENAME update_sd_preload.zip TO update_sd_base.zip AND ORIGINAL update_sd_base.zip TO update_sd_preload.zip, resulting:
    update_sd_base.zip (206751 KB)
    update_sd_cust_VOG-L29_hw_eea.zip (37 KB)
    update_sd_preload_VOG-L29_hw_eea_R2.zip (4207731 KB)
    It will flash faster with flash successfully, still softbrick.

    THIRD dload folder do as step 3 bellow then flash it (copy the dload folder and replace the one used on step 2 if you are using the same USB device)
    3. THIRD TIME RENAME update_sd_cust_VOG-L29_hw_eea.zip TO update_sd_base.zip AND ORIGINAL update_sd_base.zip TO update_sd_cust_VOG-L29_hw_eea.zip, resulting:
    update_sd_base.zip (37 KB)
    update_sd_cust_VOG-L29_hw_eea.zip (4207731 KB)
    update_sd_preload_VOG-L29_hw_eea_R2.zip (206751 KB)
    Flashing will be instantaneous and will reboot and revive your device from softbrick.

    Goodluck flashing and let me know if it worked :confused:

    Sent from my LIO-L29 using Tapatalk
    6
    Haha I like your style, that will screw them :laugh:

    Its just a pity you have to be wary now.
    But I hope it's not too much hassle for you, and you can keep helping us here :good:

    :angel::angel::angel::angel:, i won't let you guys down, because as long as i have a Huawei unit (mine or my familly - i have 2 Mate 10 Pro's, 2 P2o Pro's and 2 P30 Pro's + Mate 20 Pro from work :eek:) i will haunt this threads :eek:

    No hassle for me :) just want to screw those guys business :))))

    Sent from my VOG-l29 using XDA Labs

New posts