Hi fellows xda'ians,
I've made this thread in order to have a clean and updated one with links for
latest dload firmware, info,
changelog &
other guides. I will keep updating this OP with newest dload firmware
ONLY for EMUI 10.1. To decompress
ANY firmware file that has .EF extension,
use EF File Extractor v7.4
Latest firmware was added on 03.12.2020 for VOG-L29 C431 v10.1.0.179, with OCTOBER SP as changelog.
USING dload FW in order to update your device WILL DO A FULL WIPE & ERASE YOUR INTERNAL MEMORY, SO DON'T FORGET TO BACKUP BEFORE using
Huawei HiSuite! Also, I'm not responsible for bricked devices! READ BEFORE PROCEEDING & BE SURE YOU HAVE THE RIGHT dload firmware according to your needs!
Huawei P30 PRO VOG-L29 C431 v10.1.0.179
GDRIVE VOGUE-L29C 10.1.0.179(C431E23R2P5)_Firmware_EMUI10.1.0_05017BHV online
Huawei P30 PRO VOG-L29 C461 v10.1.0.163
androidhost.ru VOGUE-L29C 10.1.0.163(C461E12R3P1) FIRMWARE EMUI10.1.0 05015SYC online
Huawei P30 PRO VOG-L09 C431 v10.1.0.150
GDRIVE VOGUE-L09C 10.1.0.150(C431E19R2P5)_Firmware_EMUI10.1.0_05016TKC online
Huawei P30 PRO VOG-L29 C432 v10.1.0.150
GDRIVE VOGUE-L29C 10.1.0.150(C432E19R2P5)_Firmware_EMUI10.1.0_05015SFW online
Huawei P30 PRO VOG-L29 C10 v10.1.0.151
androidhost.ru VOGUE-L29C 10.1.0.151(C10E11R5P1) FIRMWARE EMUI10.1.0 05015SPM online.
Huawei P30 PRO VOG-L04D C25 (CLARO) v10.1.0.141
GDRIVE VOGUE-L04D 10.1.0.141(C25E18R1P3)_Firmware_EMUI10.1.0_05015TJP online
-------------------------------------------------------------------------------------------------------------------------------------------------------
Following this guide for VOG-L04 users you will find out how to flash on a carrier branded device using a different cust firmware, shared by @oremor305 and reconfirmed by @cre4per for working on a VOG-L04 C792 cust.
If you need to revive a softbricked device (bootloader depending), follow post
#463. This method is working also for devices with C900 cust.
HOW TO flash dload FW:
UPGRADE USING OTG ADAPTER or OTG CABLE + USB MEMORY STICK
1.
Extract dload folder from downloaded archive above (
dload folder with all 3 zips inside) and copy to your memory stick / drive (formatted as exFat or NTFS) that will be used to upgrade
2.
BACKUP your stuffs if you haven't done yet
3. Factory Reset your phone (optional) and POWER it OFF
4. Insert your OTG + memory stick / drive with the right firmware on it (dload folder with all 3 zips inside)
5.
ON EMUI 10 enter eRecovery by pressing
POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the
POWER button and keep pressing
VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select
Update mode, then select
Memory card/OTG update mode and it should start the update.
UPGRADE USING Huawei NM Card
1.
Extract dload folder from downloaded archive above (
dload folder with all 3 zips inside) and copy to your Huawei NM Card
2.
BACKUP your stuffs if you haven't done yet
3. Factory Reset your phone (optional) and POWER it OFF
4.
ON EMUI 10 enter eRecovery by pressing
POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the
POWER button and keep pressing
VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select
Update mode, then select
Memory card/OTG update mode and it should start the update.
OR
If you want to do it from sistem after you've made your backup and had an Factory Reset (optional), insert OTG + memory stick / drive OR
copy dload folder with all 3 zips inside to your Huawei NM Card and dial this code on dialer
*#*#2846579#*#* then select
4.Software Update then
1.Memory card Upgrade . If your inserted card / memory stick or USB drive or Huawei NM Card it's recognised and has the right files, your phone will restart & start flashing the firmware. At the end after succesfully flashed firmware, you can remove the OTG (if you used one).
How to check for update using eRecovery on EMUI 10 / 10.1 :
It doesn't require a cable plugged in and using this method in order to update
WON'T wipe your phone data, it's acting like an normal OTA. In order to acces eRecovery,
Power OFF your device or
Restart it. Press then simultaneously
POWER+VOLUME UP and keep them pressed untill you see Huawei on screen. Release the
POWER button and keep pressing
VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select
Update mode, then select
eRecovery mode then
Update and recover system then
Download update and recover. Connect it to Wi-Fi and it should start the update. If it's still the version you're atm, you can hit
Cancel and then
Restart. If it's a newer version than the one installed, let it download and update. At the end, it will restart to system.
Clean and succesfully flashings, guys & keep in mind that you can donate me in order to maintain this thread alive or if my firmwares helped you or you just appreciate my work @xda :highfive: