[ROM][EXYNOS] LineageOS 17.1 for S10e|S10|S10+ - v1.4 (UPDATE: 2020-12-17)

Thorst1 · Oct 29, 2020

GuestK00483 said:
I think the problem depends in the Google Play Protect certification. At the play store my device is shown as not play protect certified. Dont know if it is possible to get it certified. It would be very nice to use the pushtan app in the phone

Hi guys, I've just installed this awesome ROM on my S10E. I've had LineageOS on my Xiaomi Mi6 for a long time, so I'm a bit familiar with the software. I noticed I couldn't use one of my banking apps even though I'm not rooted. I noticed the Play Protect certification wasn't working and searched this thread on the issue.
This post has never been answered, so I'm also wondering: is this expected behavior, or did I do something wrong while installing this ROM?
--edit--
Right, I missed a bit of the third post, shame on me!

modpunk said:
Can I use GPay? What about other banking apps
GPay as well as some other banking apps check if the device passes safetynet and will not start if it doesn't. Safetynet fails when the bootloader is unlocked and therefore this ROM will not run GPay and other applications that need it. This official LineageOS statement explains why safetynett will never by bypassed (by default).

Didn't know about this, to be honest. On my Xiaomi I've also unlocked my bootloader and its Play Store is certified, strange...

Nosepull · Oct 29, 2020 at 7:54 PM

Anybody else unable to get Magisk root to work? I followed the instructions (flash Magisk boot image with Heimdall), but after a reboot Magisk is not installed. I had Magisk working with the previous version of this ROM.

[MAX] · Aug 11, 2020 5 2 3

Thorst1 said:
Hi guys, I've just installed this awesome ROM on my S10E. I've had LineageOS on my Xiaomi Mi6 for a long time, so I'm a bit familiar with the software. I noticed I couldn't use one of my banking apps even though I'm not rooted. I noticed the Play Protect certification wasn't working and searched this thread on the issue.
This post has never been answered, so I'm also wondering: is this expected behavior, or did I do something wrong while installing this ROM?
--edit--
Right, I missed a bit of the third post, shame on me!

Didn't know about this, to be honest. On my Xiaomi I've also unlocked my bootloader and its Play Store is certified, strange...

Some applications with nfc payment support work perfectly (Root, MicroG, Magisk Hide Props)

DerSteppo · Oct 29, 2020 at 8:47 PM

Nosepull said:
Anybody else unable to get Magisk root to work? I followed the instructions (flash Magisk boot image with Heimdall), but after a reboot Magisk is not installed. I had Magisk working with the previous version of this ROM.

I was successful by flashing magisk.img via twrp into boot :good: Be sure to use the correct magisk file corresponding to the LOS version.

Nosepull · Jan 9, 2015 193 32 48

DerSteppo said:
I was successful by flashing magisk.img via twrp into boot :good: Be sure to use the correct magisk file corresponding to the LOS version.

You're right. Flashing with Heimdall does not work, however, flashing from TWRP works! I don't have to understand that...

Thorst1 · Oct 30, 2020 at 3:53 PM

[MAX] said:
Some applications with nfc payment support work perfectly (Root, MicroG, Magisk Hide Props)

Yeah, I've had Magisk a while ago on the Xiaomi, but even without that, my Play Store was certified on LOS. I don't want to root my Samsung, but weirdly enough I might need to, just to get around the root detection

doeternietoe · Dec 31, 2010 51 16 0

Today I updated from 1.0 to 1.2 and like the previous update, it all went quite smoothly. Last time I forgot to change the passcode, but after several tries I got in. So this time I also took the risk, and I can report that after several complete shutdowns (as apposed to reboots) I was able to login using my usual pin.

I downloaded the firmware with Frija and modified that. In case anybody wants it, please find my version in either of the links below:

https://www.sendspace.com/file/tg7r2o
http://www.filedropper.com/s9dti8edited

romstockprivate · Jan 18, 2014 55 1 0

I am so close to being able to install LOS but I cannot get into recovery. I press Bixby+Vol up+power and my stupid phone boots to TWRP over and over and over. Ideas?

KanyT · Nov 19, 2014 6 2 0

What is the right way to update magisk in latest v1.2 build?
Patching boot.img from magisk_manager leads to bootloop.

cgirerd · Oct 31, 2020 at 8:37 AM

romstockprivate said:
I am so close to being able to install LOS but I cannot get into recovery. I press Bixby+Vol up+power and my stupid phone boots to TWRP over and over and over. Ideas?

Well, TWRP is the recovery. Did you mean download mode maybe? For this, press Bixby+Vol down, and insert the usb cable in your phone, previously connected to your computer at the other end.

guguxfr · May 5, 2010 43 2 28

heistza said:
For those with S10e, here are the firmware files I used just now.
As mentioned above, I extracted these from G970FXXS9DTI8 that I got from samfw.com
https://mega.nz/file/sCpUkI7L#086KddxUTBm_UieY5pH_mlAuPRdMEYOun87SbcaIZ0w

Ah, thanks a lot. In fact I flashed DTH7 after upgrading to 1.2, so I'll reflash with that one.

DerSteppo · Oct 31, 2020 at 11:36 AM

KanyT said:
What is the right way to update magisk in latest v1.2 build?
Patching boot.img from magisk_manager leads to bootloop.

There is a new magisk image file in modpunk's download folder for 1.2, you can flash it via twrp to boot section. :good:

KanyT · Nov 19, 2014 6 2 0

DerSteppo said:
There is a new magisk image file in modpunk's download folder for 1.2, you can flash it via twrp to boot section. :good:

That image has old 20.4 version of magisk.
I need to upgrade to 21 version of magisk somehow.

romstockprivate · Jan 18, 2014 55 1 0

cgirerd said:
Well, TWRP is the recovery. Did you mean download mode maybe? For this, press Bixby+Vol down, and insert the usb cable in your phone, previously connected to your computer at the other end.

You were right. When I saw "recovery" I did not think TWRP.

romstockprivate · Jan 18, 2014 55 1 0

I have seen posts online that LOS supports wifi calling but I cannot find that option in the 26 Oct build. Anyone?

romstockprivate · Jan 18, 2014 55 1 0

cgirerd said:
Well, TWRP is the recovery. Did you mean download mode maybe? For this, press Bixby+Vol down, and insert the usb cable in your phone, previously connected to your computer at the other end.

I was able to get LOS installed but the lack of wifi calling is a deal breaker for me.

DerSteppo · Oct 31, 2020 at 10:37 PM

KanyT said:
That image has old 20.4 version of magisk.
I need to upgrade to 21 version of magisk somehow.

Oh yes, sorry! You are right. I have not realised that there was already v21. I am still on 20.4, works for me. :fingers-crossed:

derf elot · Nov 1, 2020 at 3:11 AM

DerSteppo said:
Oh yes, sorry! You are right. I have not realised that there was already v21. I am still on 20.4, works for me. :fingers-crossed:

we will upgrade magisk (which has to be directly added to the boot image) once it is out of beta - which 21.0 is.

Sent from my SM-G970F using XDA Labs

flunkyball · Nov 1, 2020 at 1:26 PM

What is the way to go for Microg ?
Iam preparing to change over from ivans LOS version and there I used the nanodroid packages to patch signature spoofing support and install microg itself. Will it work the same way with this rom ?
Btw.: dti8 firmware packages are missing (or I just did look at the wrong place

)

NiceRiceSVK · Oct 25, 2019 0 0 0

Finally version for the latest firmware, thanks!

[ROM][EXYNOS] LineageOS 17.1 for S10e|S10|S10+ - v1.4 (UPDATE: 2020-12-17)

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

New member