ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

Search This thread

Proff55

Member
Feb 21, 2021
9
2
Padova
A Hard Brick happened to me too.
I solved with the Test Points, but be careful, I used a piece of electric cable, because with the tip of a screwdriver it didn't work.
Radio off and disconnected from the power supply, I start Flash Tool, I short the test points and I connect the USB cable. When the red line appears in the Flash Tool application, I can remove the contact on the Test Points.
Attention, after a Hard Brick, you must flash your ROM including the Preloader. (Full ROM)
Good luck.
 

lolloxda

Senior Member
May 13, 2009
113
11
Roma

Attachments

  • mainboard radio.jpeg
    mainboard radio.jpeg
    124.1 KB · Views: 138

Tamyimt9

New member
Feb 27, 2021
4
0
Some body plz guide me how to short test point on this board and kindly send me a picture with arrow marks on test points i ll be very very thankful to you .
As i m much worried about this
God bless you plz
Tell me anyone of you
+923465710522
 

Attachments

  • IMG_20210228_021854.jpg
    IMG_20210228_021854.jpg
    2.6 MB · Views: 74

viktorsaari

Senior Member
May 19, 2019
362
169
Cant downlload Google Drive replay

"Sorry, this file is infected with a virus

Only the owner is allowed to download infected files."
I downloaded and scanned with antivirus, no issue with the file. It's just Google being overprotective. If you still need I can share Mega link.
Screenshot_3.jpg
 

younes sowady

New member
Mar 16, 2021
3
0
Hi
I have this android screen on my car
It's stuck like this
It doesn't interact with the screen buttons
I can't press on the screen itself and select any option even it is touch screen
I have conected it on a mouse and keyboard but but it didn't regonize them
Note: i don't what the modle of the screen nor the android version
Any idea?
479b7f38-9661-437f-808d-125a3124b11d.jpg
 

adertiphart

Member
Mar 17, 2021
5
0
so, i formatted my usb drive on my pc and copied the .bin and .zip files...inserted into my car usb...it said that my usb is not formatted or something....so it asked if i wanted to format the drive. I formatted it and now the usb drive is non-accessible on my pc, showing with symbols and whatnot. clever if i do say so myself...how do i reverse it?
usb format error.png
usb format error1.png
 

Top Liked Posts

  • There are no posts matching your filters.
  • 31
    ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

    Thanks everyone who contributed in my effort to fix my bricked device. Here is all that I have found useful in successfully reviving my device.
    The files shared here are the ones that worked on my unit (see specs and pictures below) If your device is different, it may or may not work.
    If the device has dedicated radio chip inside, the Firmware number will show as YT9218, if no radio chip, then it will show as YT9217
    Note: if your device is not bricked, Make a full backup before trying another firmware.

    I hope it helps. (donations are always welcome ):highfive:

    Memory dump:
    firmware 20181222 HiFi: (Link) (thanks mazepa2000) (May 2019 update below)
    Rooted TWRP firmware 20190523 HiFi: (Link)

    Preloader (Boot_1) from other Similar Firmwares: (Link)
    Download the one similar to your device's version.

    Firmware via flash tool: Rooted TWRP 20190523 (Link) Thanks Maxkir
    (You may need to remap side touch buttons in Factory settings (code 8888) -> Touch settings -> Click start -> Name of the button -> The button itself ->Repeat for all the buttons -> close -> ok).

    Firmware for YT9213 Device: (Link) (Thanks pajurpl)

    Update / Upgrade Files USB flash drive:
    Firmware 20190522 HiFi: (Link) (Thanks foxgiggle , iSevenAuto)
    Firmware 20190906: (Link)

    MCU 3.1 (Link)(Thanks foxgiggle )
    MCU 2.8 (Link) (Thanks lemmon and foxgiggle)

    Memory Dump Procedure via flashtool:
    (Memory dump is only needed if you need full recovery from a backup. Otherwise you may only need to do the next part.)
    Download and install MTK drivers. (Link)
    Load scatter file and preloader (Link) in spflashtool. Press Ctrl Alt V , then go to Window and select "write memory". In file path select "user", in begin address put 0x0, In Region select the partition named "EMMC_USER". Hit Write memory. After that plug in the usb cable (connected to usb1 port). If the device is not detected, you need to power it on. If still not detected then you might need to short the two test points (see picture) (without power this time) and then plug in the usb cable. Remove the short when write process starts. Check if the issue is fixed. If its not fixed, then do the same to write boot2 and boot1 partitions as well. You may need to download Boot_1 specific to your original firmware from the link above.

    Uploading Firmware (full or parts) via flashtool:
    If you are uploading the firmware available in parts, you only need to upload "BOOTIMG" and "ANDROID" (SYSTEM).
    You may also need to flash "RECOVERY". Remember to uncheck the preloader. Here is a nice instructions file. (Link) (thanks Maxkir)
    There is more info and firmwares to chose from at 4pda forum.

    Update / Upgrade Procedure via USB flash drive:
    Copy the zip file (do not extract) to usb drive or microSD card, (formatted by SD Card Formatter). Connect to usb port 1 or 2. Go to Car Settings, System info. Click Android Upgrade.
    --OR--
    Extract the zip into a folder named XYAUTOUPG into the flash drive or microSD card, connect to usb port 1 or 2 and then reboot. Upgrade should start automatically. You might need to try with different USB drives or sd cards. For some reason this only works with certain usb and cards.

    MCU Upgrade Procedure via USB flash drive:
    Extract the mcu file into flash drive or microSD card. Connect to usb port 1 or 2. Go into system info and update mcu.

    Make a Full Backup/Memory Dump:
    Open SPFlashtool, Select Memory Test Tab, Select only RAM Test (uncheck the rest), push start, and connect the unit. Save the information appeared, in a text file for later. (Read above "Memory dump procedure" for the usb connection setup).
    Now go to ReadBack Tab, Double click on empty space next to tick mark, Select a folder where you want to store the dump file, and Type a name for the dump file you are going to creat, (ie. Boot_1, Boot_2, USER). Click Save. In next window "Readback block start address", select the region you want to make backup of (ie. EMMC_BOOT_1, EMMC_BOOT_2, EMMC_USER).
    Start address is 0x0000000000000000
    Length copy and paste from the text file you created earlier.
    typically for Boot_1 and 2 the length is 0x0000000000400000
    and for USER (16GB models) the length is 0x00000003a8000000
    Click OK.
    Now click on Readback and then connect the unit via usb cable. and Read process will start.
    Do the same to make backup of all three partions. USER will take long time because its the largest partition.

    RDS FM Radio:
    Radio app with fixed RDS, channel names on buttons and HiFi: (Link) (thanks sjguk)
    Copy to FMRadio directory, rename to FMRadio.apk and change permission 764. (or 755 ?).

    Channel name Editor: (Link) (thanks mclaught)
    install as normal. You may need to install GalaPublicResources. Click top right dots.


    Multi Window Mode:
    Go to root folder, look for build.prop. Open in text editor. Change the line ro.build.type=user to ro.build.type=userdebug.
    If no such line is there, then simply add the line at the end. Save and exit. Go to Android settings, Developer options, look for multi window mode and enable it. Swipe down from the top of the window, Click on recent apps tile. You'll see the new multi window option there.

    Subwoofer output Pin:
    The default AUX_out pins are for mid range audio and is controlled by Mid slider in the mixer. The subwoofer output is on another pin (See Picture).
    it is easy to remove one of the AUX_out pin and install it at the Sub output. this pin is controlled by Subw slider in the audio mixer.


    Launchers UI1, UI2, UI4 (Link), UI5 (Link) (Thanks Maxkir)

    Boot animation: (Resolution is 1024x600)
    eg. (Link)
    The animation preview didn't work for me, but I installed it anyway and it worked fine.

    OBD Dongle Bluetooth Setting:
    Open Bluetooth app, Click on settings, tap on the pin code "0000" and type in "1234" instead. Save settings.
    Now search and connect the OBD dongle normally.

    I hope it helps. (donations are always welcome ):highfive:

    Unit Specs:
    motherboard marking YT9217 VER1.5 XY AUTO also 9218 VER2.4 XY AUTO near the antenna
    Model no 8227L_demo android 8.1
    Android YT9217C_00005_V003_20191402_HIFI
    Kernel 3.18.22
    DDR 1GB FLASH 16GB
    CPU A7 1.3GHzx4
    Amplifier AC7315 mos bile duct 45Wx4
    AutoChip ARM AC8227L
    Mediatek MT6323LGA
    Kingston EMMC 16G
    4
    the link takes me to the main page. and then its like finding needle in a haystack.

    All relevant info about ROMs and flashing you can find in top header of this russian forum.
    Look at the spoilers in the gray header layer and use Google translate to understand what is written there.

    There are 3 ROM versions for the 8227L based head units. I downloaded and installed the oldest of the 3 (rooted and TWRP IMG included). Copy all files from the RAR to a flashdrive in root folder.
    Turn off the head unit.
    Connect the flashdrive to USB 1 slot of the head unit.
    Turn on the the head unit.
    The install process starts immediately after turning on.
    It takes about 10 minutes.
    When install process is ready, turn off the head unit.
    Detach the flashdrive.
    Turn on the head unit and it will boot with factory settings like a new device....

    Note that there are also ROMs for flashing wit MTC flash tool downloadable.
    But the versions for installing from USB sticks ( po russki - dla flashky) are more comfortable to install and I don't own a Windows pc. So this variant was my favorite method...

    Regards and good luck...

    Edit: if your unRAR program asks for a password for unpacking the RAR file, then use Eazy unRAR app from Playstore on your Android device - it ignores password lock in RAR file ;) ...

    Edit2: the 5th gray spoiler in the top header of the Russian forum hosts the links to the ROM RAR files...
    4
    new firmware and MCU

    comming soon:
    16808269.png
    3
    Lots of info on those headunits (russian, use google translate):
    http://4pda.ru/forum/index.php?showtopic=936535

    pinout:
    3
    Very nice indeed.
    Im using Agama launcher at the moment, far better than others in my opinion.
    a bit off topic...

    Updated to MCU 2.8 - automatic acc off time delay works > 24hours...
    I modded the UI2 Launcher a little bit for my personal needs.
    See attached screenshot.
    (my car, VW golf plus 2013, is now shown in Homescreen...)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone