[ROM][FND3][4.4.2][22 May]PhoeniX ROM V18.8 [OTA | Super Fast |S5 & Note 3 Features!]

Pablo87

Senior Member
Jul 26, 2010
409
79
58
near Novi Sad
Does someone have problem with external SD card write permission? Worked like a charm for 7 months but now i have problem writing on it. It just stopped working but after reboot it working again for approximately 6-7 hours when again stop working.

What can be the problem?
 

TarikVaineTree

Senior Member
Dec 7, 2012
87
15
0
Hey folks! I just wanted so say goodbye here and thanks for all the help you gave me. I had a fantastic year (or more I think) with this rom! Thank you tamirda for this!
However. I'm done with Touchwiz once and for all so I'm using CM 12.1 with AGNi Kernel right now which runs super smooth.

Anyway. If anyone of you is still lookin' for a Touchwiz based rom for the Note II because of the S-Pen stuff or whatever... I'd like to say: This is by far the best Touchwiz rom out there and you'll be happy with it (my own opinion). It's fast, has many features and is really really stable!

So thanks again for the support guys. :)

---------- Post added at 05:22 PM ---------- Previous post was at 05:20 PM ----------

+1

Pls 18.8 link...??
Are you still looking for a 18.8 mirror? Maybe it's still on my home desktop. Could look that up later if you still haven't got it. In this case just quote or pm me please.
 

Skifi

New member
Jun 13, 2009
1
0
0
Flashing ROM

Hi all,
I am tryign to flash Phoenix ROM. I have downloaded PhoeniX.ROM.V18.5.XXUFND3.N7100.by.tamirda
but after flash i have problem:
I have rooted CM 11 its on Kit Kat 4.4.4
I have updated Bootloader to N7100XXUF0E1
I have PhilZ Touch 5 v 5.15.0, CWM Base v6.0.3.7
before i install ROM i do Wipe data / factory reset and then Clean to install a New ROM and wipe dalwik cache.
Now run install, in aroma i choose to do full wipe. Set all settings and installation is succesfully completed. But after reboot i am stuck at bootscreen. No reboots just constant bootscreen.
I have tried factory reset after install but without change.
Please can someone help me?
 

ias94

Senior Member
Jan 17, 2014
640
206
73
Hi all,
I am tryign to flash Phoenix ROM. I have downloaded PhoeniX.ROM.V18.5.XXUFND3.N7100.by.tamirda
but after flash i have problem:
I have rooted CM 11 its on Kit Kat 4.4.4
I have updated Bootloader to N7100XXUF0E1
I have PhilZ Touch 5 v 5.15.0, CWM Base v6.0.3.7
before i install ROM i do Wipe data / factory reset and then Clean to install a New ROM and wipe dalwik cache.
Now run install, in aroma i choose to do full wipe. Set all settings and installation is succesfully completed. But after reboot i am stuck at bootscreen. No reboots just constant bootscreen.
I have tried factory reset after install but without change.
Please can someone help me?
Your steps are correct though be careful in Aroma don't select too many mods or don't take too much time to select mods otherwise Aroma may get stuck. Just try and flash with minimal mods. Good luck.
 

vuralemre

Senior Member
Mar 17, 2012
250
40
0
Muğla
Hey folks! I just wanted so say goodbye here and thanks for all the help you gave me. I had a fantastic year (or more I think) with this rom! Thank you tamirda for this!
However. I'm done with Touchwiz once and for all so I'm using CM 12.1 with AGNi Kernel right now which runs super smooth.

Anyway. If anyone of you is still lookin' for a Touchwiz based rom for the Note II because of the S-Pen stuff or whatever... I'd like to say: This is by far the best Touchwiz rom out there and you'll be happy with it (my own opinion). It's fast, has many features and is really really stable!

So thanks again for the support guys. :)

---------- Post added at 05:22 PM ---------- Previous post was at 05:20 PM ----------



Are you still looking for a 18.8 mirror? Maybe it's still on my home desktop. Could look that up later if you still haven't got it. In this case just quote or pm me please.
Yes pls.. i have still 18.5 and i find 18.8 link
 
  • Like
Reactions: glatzi1407

stricek

Member
Jul 15, 2009
25
1
0
trophymanager.com
Hello.
I have a problem with this rom when trying to install it. Everytime i want to instaLl it i've get an error "(bad)" and it also says it can't open the zip file. Is there any chance to fix this? I'm using latest Philz touch recovery. I don't have a problem with any other rom, just this one.
 

ias94

Senior Member
Jan 17, 2014
640
206
73
Hello.
I have a problem with this rom when trying to install it. Everytime i want to instaLl it i've get an error "(bad)" and it also says it can't open the zip file. Is there any chance to fix this? I'm using latest Philz touch recovery. I don't have a problem with any other rom, just this one.
Check md5 of the downloaded zip may be it got corrupted. Use Philz 5.15
 
  • Like
Reactions: joemar66

HarnicGreeras

Senior Member
Jun 18, 2009
346
96
58
Prague
Search on Google, for Md5, and read about file integrity check.
Then check out on the net about md5 online check.
Compare the datas given, with the answer you 'll be given from md5 checker.
Hope, at least, I showed you the way
Regards
 
  • Like
Reactions: stricek

TarikVaineTree

Senior Member
Dec 7, 2012
87
15
0
Mirror

Since some of you are experiencing problems downloading V 18.8 I just repacked it here with no changes but as a RAR file containing the original ZIP file renamend.
Extract the RAR somewhere and rename the included file to let it end on .zip - that's it.

I'm just doing this because people got problems downloading the original file. I've no intention in making tamirda angry.
If this in any way is against his will I won't blink a second and remove my link!

Here it is: http://1drv.ms/1NDugdI
 

ehl.ey14

Senior Member
flashing the bl ?" <ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

---------- Post added at 08:15 AM ---------- Previous post was at 08:03 AM ----------

i got stock on galaxy note 2 logo please help!
 

tamnteh

Senior Member
Sep 26, 2009
384
47
0
flashing the bl ?" <ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

---------- Post added at 08:15 AM ---------- Previous post was at 08:03 AM ----------

i got stock on galaxy note 2 logo please help!
it's not meant to flash by odin... flash it by your recovery
 
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone