[ROM][Froyo] GeoMod 2.2.1 UPDATE 11/5

Search This thread

geokhentix

Senior Member
Jul 17, 2010
223
149
GeoMod 2.2.1

Flash with clockwork!

--Update Log--
2.2.1
Added HSUPA Support (JPP Modem)
Updated SetiroN's i9000 kernel to v1.1


--Includes...
MinimalisticBlack v1.5 BattCircle Mod by Inku / vatri91 / ultralinx

SetIroN's i9000 Superoptomized reoriented 1..1 kernel
- 340Mb available RAM with 720p support
- boot animation
- BackLightNotifications
- rasdeep's Alpha 2.0 OC/UV support

- Sztupy's Ultimate Lag Fix
*via advanced ULK features within recovery. recommended setting highlighted in bold*
Multiple configurable Lagfix options:
OCLF-like: /data stays at rfs, but has an ext2 loop device on top of it
Voodoo-like: /data is ext4, all others are kept at rfs
JFS Voodoo-like: /data is jfs, all others are still rfs
No-RFS Standard: /data is rfs+ext2, all other partitions are ext4
No-RFS Advanced: all partitions are ext4 -- (NO-RFS advanced (a=e4)
No-RFS Advanced JFS: all partitions are jfs
No-RFS Overkill: turns on all options: everything is ext4+ext2 and /data/data is bound to /dbdata
No-RFS Overkill JFS: turns on all options: everything is jfs+ext2 and /data/data is bound to /dbdata
- Stock recovery replaced with CWM

DesignGear's CDE-AOSP-BETA3.1
- Replaced mms,email,gmail,vendor,youtube,mediaprovider to maintain dark theme
- Replaced dialer (Darkness Mod)
- Replaced email.apk to fix Exchange bug

Added:
LauncherPro w/ Transparent Fullscreen Widgets (did not remove stock launcher)
ROM Manager
SpareParts


Recommended Installation Instructions

1. Flash back to stock via Odin.
2. Root with one-cick root.
3. Install ROM Manager from the market, and flash CWM.
4. Put JG8Modem.zip on your SD Card, and reboot into recovery.
5. Install from CWM and reboot system now.
6. Once back on the homescreen, dial *#0011# and ensure the 850 band is connected.
7. Assuming it is, reboot back into CWM and flash GeoMod 2.2.1.zip

To Enable HSUPA...
1) Go to phone dial Keypad;
2) Enter *#2263# (if you set to Auto, as noted above, you should see [1] Automatic[*]);
3) Select [4] Combi Bands [];
4) Select [8] WCDMA 850 (FDD V) [];
5) Select Add WCDMA_W850 [];
6) Use Menu and select Back (you should now see WCDMA 850 (FDD V)[*]);
7) Use Menu and select End.

How-to Lag Fix: Reboot into recovery and choose "advanced ULK features", then "lagfix features". then i recommend choosing "NO-RFS advanced (a=e4)". Go back and reboot system now, upon booting, a prompt will pop up. Select "Yes, with backup and restore". Done!

Screens:
lockda.png
homexd.png

dialer.png
linp.png

notif.png
18611986.gif


DOWNLOAD 2.2.1 CMW FLASHABLE

GeoMod2.2->2.2.1 Update.zip

JG8 Modem



Will be updated as I find goodies!

For support on how to configure the OC/UV, go to SetiroN's original thread here. :cool:


Thanks dg, setiron, gtg465x, signals23, reefermattness, master, ultralinx, inku, vatri91, sztupy, xcaliburinhand and supercurio for making this possible.
 
Last edited:
  • Like
Reactions: DrCruelty

d1g1talphyre

Senior Member
May 3, 2009
541
84
Oregon
so far, love the look of the rom, like the notification bar especially. circle bat mod with the chrome circle looks good.

Will post back later with some after some playin
 

E_man5112

Senior Member
Jul 13, 2010
649
34
Wait, AOSP? I thought AOSP didn't have the toggles in the notification drawer?

Looks amazing, it's the theme I've been using since, well, it came out basically :p
 

kamots

Senior Member
Jun 28, 2010
1,641
324
Atlanta
Couple of questions before i try this. Im on tays rom with a jpp modem. Do i need to disable voodoo before i flash this? Also how do you, or is there a need to disable the uber lagfix in this rom, or will odin wipe it out?

Sent from my GT-I9000 using XDA App
 

kamots

Senior Member
Jun 28, 2010
1,641
324
Atlanta
I would also like to run the JPP modem. where can I get it and how do install it. Using Odin I presume.

Sorry for noob question just never flashed a custom modem.
Can get jpp modem in tays rom by boomerod. I extracted it to a folder on my desktop and put the file in the phone section of the stand alone odin(not one click) that i gotfrom dg cog 6.. Put phone in download mode. Connect to odin click start and viola. Simple.


Sent from my GT-I9000 using XDA App
 

thehavock18

Senior Member
Jul 23, 2010
284
33
Scott AFB
Can get jpp modem in tays rom by boomerod. I extracted it to a folder on my desktop and put the file in the phone section of the stand alone odin(not one click) that i gotfrom dg cog 6.. Put phone in download mode. Connect to odin click start and viola. Simple.


Sent from my GT-I9000 using XDA App

Thank you!!
 

geokhentix

Senior Member
Jul 17, 2010
223
149
Couple of questions before i try this. Im on tays rom with a jpp modem. Do i need to disable voodoo before i flash this? Also how do you, or is there a need to disable the uber lagfix in this rom, or will odin wipe it out?

ULF supports all types of lagfixes, so you don't need to undo voodoo before you flash. worry not!

Just noticed it has the exchange reply problem. Any way to fix this?

I don't know, but i'll surely take a look at it.

I would also like to run the JPP modem. where can I get it and how do install it. Using Odin I presume.

Now intergrated!

And yes, this isn't full AOSP, it's just DesignGear's CDE-AOSP-BETA3.1, which also wasn't full AOSP, just as much as we can go without 2.2 source.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    GeoMod 2.2.1

    Flash with clockwork!

    --Update Log--
    2.2.1
    Added HSUPA Support (JPP Modem)
    Updated SetiroN's i9000 kernel to v1.1


    --Includes...
    MinimalisticBlack v1.5 BattCircle Mod by Inku / vatri91 / ultralinx

    SetIroN's i9000 Superoptomized reoriented 1..1 kernel
    - 340Mb available RAM with 720p support
    - boot animation
    - BackLightNotifications
    - rasdeep's Alpha 2.0 OC/UV support

    - Sztupy's Ultimate Lag Fix
    *via advanced ULK features within recovery. recommended setting highlighted in bold*
    Multiple configurable Lagfix options:
    OCLF-like: /data stays at rfs, but has an ext2 loop device on top of it
    Voodoo-like: /data is ext4, all others are kept at rfs
    JFS Voodoo-like: /data is jfs, all others are still rfs
    No-RFS Standard: /data is rfs+ext2, all other partitions are ext4
    No-RFS Advanced: all partitions are ext4 -- (NO-RFS advanced (a=e4)
    No-RFS Advanced JFS: all partitions are jfs
    No-RFS Overkill: turns on all options: everything is ext4+ext2 and /data/data is bound to /dbdata
    No-RFS Overkill JFS: turns on all options: everything is jfs+ext2 and /data/data is bound to /dbdata
    - Stock recovery replaced with CWM

    DesignGear's CDE-AOSP-BETA3.1
    - Replaced mms,email,gmail,vendor,youtube,mediaprovider to maintain dark theme
    - Replaced dialer (Darkness Mod)
    - Replaced email.apk to fix Exchange bug

    Added:
    LauncherPro w/ Transparent Fullscreen Widgets (did not remove stock launcher)
    ROM Manager
    SpareParts


    Recommended Installation Instructions

    1. Flash back to stock via Odin.
    2. Root with one-cick root.
    3. Install ROM Manager from the market, and flash CWM.
    4. Put JG8Modem.zip on your SD Card, and reboot into recovery.
    5. Install from CWM and reboot system now.
    6. Once back on the homescreen, dial *#0011# and ensure the 850 band is connected.
    7. Assuming it is, reboot back into CWM and flash GeoMod 2.2.1.zip

    To Enable HSUPA...
    1) Go to phone dial Keypad;
    2) Enter *#2263# (if you set to Auto, as noted above, you should see [1] Automatic[*]);
    3) Select [4] Combi Bands [];
    4) Select [8] WCDMA 850 (FDD V) [];
    5) Select Add WCDMA_W850 [];
    6) Use Menu and select Back (you should now see WCDMA 850 (FDD V)[*]);
    7) Use Menu and select End.

    How-to Lag Fix: Reboot into recovery and choose "advanced ULK features", then "lagfix features". then i recommend choosing "NO-RFS advanced (a=e4)". Go back and reboot system now, upon booting, a prompt will pop up. Select "Yes, with backup and restore". Done!

    Screens:
    lockda.png
    homexd.png

    dialer.png
    linp.png

    notif.png
    18611986.gif


    DOWNLOAD 2.2.1 CMW FLASHABLE

    GeoMod2.2->2.2.1 Update.zip

    JG8 Modem



    Will be updated as I find goodies!

    For support on how to configure the OC/UV, go to SetiroN's original thread here. :cool:


    Thanks dg, setiron, gtg465x, signals23, reefermattness, master, ultralinx, inku, vatri91, sztupy, xcaliburinhand and supercurio for making this possible.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone