[ROM][G920/5-F-I-S-K-L-T-W8][10.0] UNOFFICIAL LineageOS 17.1

Search This thread

pointgourd

Member
Jul 3, 2020
42
4
Dhaka, Bangladesh
Notification led doesn't work when a notification comes and it's customization is also very limited. Notification led works only when it's plugged in or it's low on battery. Sometimes recent button doesn't works but its not that big of an issue.
 

ARDV

Senior Member
Apr 6, 2012
438
19
i tried many times installing this rom but the phone cant boot and it takes me to TWRP

i have: galaxy s6 920F zerofltelgt

i hope that you can help
 
Last edited:

Johannesdavidsen

Senior Member
Jan 22, 2020
75
15
33
Upernavik
So i have been using this for a while now, some of the problems i have faced

1. Random restarts
2. Wifi signal range reduced
3. GSM signal lost and i have to restart. Happening very frequently, not sure if its sim card or OS.

First install requires a lot of reboot even this ROM
All roms requires reboots but if you use it a while it will stop sudden reboots
Latest baseband of your phone is in latest firmware of course
Good luck..
 

Mizzio

Member
Sep 2, 2019
6
1
Hello, I congratulate you for the excellent update. All nice with this update, but the echo during the phone call continues to be there.
 

himanuel

New member
Jul 31, 2020
1
0
I restarted my s6 edge gt25t only to get a SIM network unlock pin notification...please help!!!
I'm currently running on lineage is 17.1 android 10 os
 

DefectiveReality

New member
Jul 30, 2020
3
1
does it work on S6 Edge SM-g925F zeroltexx?
First of all I really grateful to enesuzun for giving us androids new versions I appreciate his grate work and effort for samsung s6.
Yes it works with only two issues:
1-UI lagging commonly
2-Voice echo in calls
But I noticed that in installation zerofltexx installed as a target. Is a issue caused by my device or installation progress. I use SM-G925F and before this rom I used android 9 lineageos 16 from enesuzun again.
 
Last edited:

hqkingz

Member
Jul 30, 2020
13
2
First of all I really grateful to enesuzun for giving us androids new versions I appreciate his grate work and effort for samsung s6.
Yes it works with only two issues:
1-UI lagging commonly
2-Voice echo in calls
But I noticed that in installation zerofltexx installed as a target. Is a issue caused by my device or installation progress. I use SM-G925F and before this rom I used android 9 lineageos 16 from enesuzun again.

Flashed the rom but it goes back to recovery.
 

DefectiveReality

New member
Jul 30, 2020
3
1
Flashed the rom but it goes back to recovery.

I installed as clean installation and there were no error when boot.
Delete Caches and System, Flash zip and clean cache and install zip by zip.

Everytime when flashing this this rom it says target: zeroltexx but Samsung/zerofltexx installing. After boot, it says my device model GM-G920F. Maybe lag issiue is based on this on my phone?
In addition, camera never crashed like lineageos 16.0, this rom has stable camera by far.
 
Last edited:

Johannesdavidsen

Senior Member
Jan 22, 2020
75
15
33
Upernavik
First of all I really grateful to enesuzun for giving us androids new versions I appreciate his grate work and effort for samsung s6.
Yes it works with only two issues:
1-UI lagging commonly
2-Voice echo in calls
But I noticed that in installation zerofltexx installed as a target. Is a issue caused by my device or installation progress. I use SM-G925F and before this rom I used android 9 lineageos 16 from enesuzun again.

Hi you can fix high volume problem or say echo by editing: /system/vendor/etc/mixer_paths_0.xml
I've used MTmanager app after rooted with magisk
After edit there will be (bak file) just move to side on the mtmanager if you will move file you have to move to the side on mtmanager
And reboot. Edit only that says like call or Let say search for call and it will show call with colour or how to say mark them if you search it, and edit volume numbers
And everything has it own volume like earpiece or handset or everything else but mine is a bit low maybe too low on call. There are handset/speaker/and phoneheads? or headphones? Lol
:good: ?
Yes they was problem with call volume
You can even edit media volume but remember to edit only what you need I have fix it like that.
It can't be fixed on software so I do that way I can't fix softwares and of course just maximise and 5-6 steps -down on volume settings and try calling if it's fixed high volume
You can also edit mic volume.
I can copy what I edited later

---------- Post added 02-08-2020 at 12:00 AM ---------- Previous post was 01-08-2020 at 11:29 PM ----------

Here is the XML file I edited so just copy text if you want to test my edit on Volumes just check original file space (Lines) on start/middle/and end of text on next :
Start from this Line put space here like on original file
<mixer>
<pcmdai playback_link="6" />
<pcmdai playback_jam_link="7" />
<pcmdai playback_deep_link="3" />
<pcmdai capture_link="0" />
<pcmdai baseband_link="1" />
<pcmdai bluetooth_link="2" />

<!-- Reset configurations -->
<ctl name="IN1L Mux" value="A" />
<ctl name="IN2L Mux" value="B" />
<ctl name="HP Switch" value="0" />
<ctl name="SPK Switch" value="0" />
<ctl name="RCV Switch" value="0" />
<ctl name="Main Mic Switch" value="0" />
<ctl name="Sub Mic Switch" value="0" />
<ctl name="Third Mic Switch" value="0" />
<ctl name="Headset Mic Switch" value="0" />
<ctl name="VI SENSING Switch" value="0" />
<ctl name="FM In Switch" value="0" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="CP Mode" value="Default" />
<ctl name="VoiceControl Mode" value="Normal" />
<ctl name="Noise Gate Switch" value="0" />
<ctl name="HPOUT1 Digital Switch" value="1" />
<ctl name="HPOUT3 Digital Switch" value="1" />
<ctl name="SPK Enable Switch" value="Enable" />

<ctl name="HPOUT1 DRE Switch" value="0" />
<ctl name="HPOUT3 DRE Switch" value="0" />
<ctl name="HPOUT1 EDRE Switch" value="0" />
<ctl name="HPOUT3 EDRE Switch" value="0" />

<ctl name="IN1 OSR" value="1.536MHz" />
<ctl name="IN3 OSR" value="1.536MHz" />

<ctl name="IN1L HPF Switch" value="1" />
<ctl name="IN3L HPF Switch" value="1" />
<ctl name="Input Ramp Up" value="8ms/6dB" />

<!-- default routes -->
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="DSP2 Rate" value="SYNCCLK rate 3" />
<ctl name="DSP3 Rate" value="SYNCCLK rate 3" />
<ctl name="DSP4 Rate" value="SYNCCLK rate 2" />

<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 1" />
<ctl name="ASRC1 Rate 2" value="ASYNCCLK rate" />
<ctl name="ASRC2 Rate 1" value="SYNCCLK rate 1" />
<ctl name="ASRC2 Rate 2" value="ASYNCCLK rate 2" />

<ctl name="HPOUT1L Input 1" value="AIF1RX1" />
<ctl name="HPOUT1R Input 1" value="AIF1RX2" />
<ctl name="HPOUT3L Input 1" value="AIF1RX1" />
<ctl name="HPOUT3R Input 1" value="AIF1RX2" />
<ctl name="HPOUT3L Input 2" value="ISRC2INT1" />
<ctl name="HPOUT3R Input 2" value="ISRC2INT1" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1R" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="ASRC1IN2R Input" value="AIF2RX2" />

<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ISRC2DEC1 Input" value="IN1L" />
<ctl name="ISRC2DEC2 Input" value="IN3L" />

<ctl name="ISRC4 FSL" value="SYNCCLK rate 3" />
<ctl name="ISRC4 FSH" value="SYNCCLK rate 1" />
<ctl name="ISRC4DEC1 Input" value="DSP5.1" />
<ctl name="ISRC4DEC2 Input" value="DSP5.1" />
<ctl name="ISRC4INT1 Input" value="AIF4RX1" />
<ctl name="ISRC4INT2 Input" value="AIF4RX2" />

<ctl name="DSP5 Aux 2" value="ISRC4INT1" />
<ctl name="DSP5 Aux 3" value="ISRC4INT2" />
<ctl name="DSP5L Input 1" value="AIF1RX1" />
<ctl name="DSP5L Input 2" value="AIF1RX2" />

<!-- default routes for earphone tuning -->
<ctl name="HPOUT1L ONEFLT Switch" value="1" />
<ctl name="HPOUT1R ONEFLT Switch" value="1" />
<ctl name="DAC COMP 1" value="5 14" />
<ctl name="DAC COMP 2" value="1 1" />
<ctl name="FRF COEFF 1L" value="3 244 247 48 6 4 254 205" />
<ctl name="FRF COEFF 1R" value="3 244 247 48 6 4 254 205" />

<!-- EQs Filter setting -->
<ctl name="EQ1 Coefficients" value="0 0 15 209 3 253 0 188 30 244 241 7 4 12 4 18 29 30 242 193 4 10 10 232 24 73 246 214 4 10 27 18 6 216 5 182 64 0 0 0" />
<ctl name="EQ1 B1 Volume" value="12" />
<ctl name="EQ1 B2 Volume" value="12" />
<ctl name="EQ1 B3 Volume" value="12" />
<ctl name="EQ1 B4 Volume" value="12" />
<ctl name="EQ1 B5 Volume" value="12" />
<ctl name="EQ2 Coefficients" value="0 0 14 252 3 255 4 16 20 219 249 109 4 10 37 84 25 146 242 231 4 10 11 127 19 112 248 160 4 10 34 40 6 161 5 168 64 0 0 0" />
<ctl name="EQ2 B1 Volume" value="12" />
<ctl name="EQ2 B2 Volume" value="12" />
<ctl name="EQ2 B3 Volume" value="7" />
<ctl name="EQ2 B4 Volume" value="8" />
<ctl name="EQ2 B5 Volume" value="12" />
<ctl name="EQ3 Coefficients" value="0 0 14 252 3 255 4 16 22 148 248 40 4 10 32 77 25 146 242 231 4 10 11 127 18 140 249 19 4 10 35 240 6 161 5 168 64 0 0 0 " />
<ctl name="EQ3 B1 Volume" value="12" />
<ctl name="EQ3 B2 Volume" value="12" />
<ctl name="EQ3 B3 Volume" value="12" />
<ctl name="EQ3 B4 Volume" value="7" />
<ctl name="EQ3 B5 Volume" value="7" />
<ctl name="EQ4 Coefficients" value="0 0 15 209 3 253 0 188 30 244 241 7 4 12 4 18 29 30 242 193 4 10 10 232 24 73 246 214 4 10 27 18 6 216 5 182 64 0 0 0" />
<ctl name="EQ4 B1 Volume" value="12" />
<ctl name="EQ4 B2 Volume" value="12" />
<ctl name="EQ4 B3 Volume" value="12" />
<ctl name="EQ4 B4 Volume" value="12" />
<ctl name="EQ4 B5 Volume" value="12" />

<!-- Channel information -->
<!-- main_mic : Left -->
<!-- 2nd_mic : Right -->
<!-- headset_mic : Right -->
<!-- 3rd_mic : Right -->
<!-- sco : None -->
<path name="capture_channel_left">
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
</path>

<path name="capture_channel_right">
<ctl name="AIF1TX1 Input 1" value="LHPF2" />
<ctl name="AIF1TX2 Input 1" value="LHPF2" />
</path>

<path name="capture_channel_stereo">
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF2" />
</path>

<path name="capture_channel_invert">
<ctl name="AIF1TX1 Input 1" value="LHPF2" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
</path>

<path name="mute-speaker">
<ctl name="DSP5L Input 1 Volume" value="0" />
<ctl name="DSP5L Input 2 Volume" value="0" />
<ctl name="AIF4TX1 Input 1 Volume" value="0" />
<ctl name="AIF4TX2 Input 1 Volume" value="0" />
</path>

<path name="unmute-speaker">
<ctl name="DSP5L Input 1 Volume" value="20" />
<ctl name="DSP5L Input 2 Volume" value="20" />
<ctl name="AIF4TX1 Input 1 Volume" value="4" />
<ctl name="AIF4TX2 Input 1 Volume" value="4" />
</path>

<path name="mute-headset">
<ctl name="HP Switch" value="0" />
</path>

<path name="unmute-headset">
<ctl name="HP Switch" value="1" />
</path>

<path name="default-impedance-volume">
<ctl name="HPOUT1L Impedance Volume" value="100" />
<ctl name="HPOUT1R Impedance Volume" value="100" />
</path>

<!-- Output stage -->
<!-- media playback -->
<path name="media-handset">
<ctl name="CP Mode" value="Inverting" />
<ctl name="HPOUT3L Input 1" value="AIF1RX1" />
<ctl name="HPOUT3R Input 1" value="AIF1RX2" />
<ctl name="RCV Switch" value="1" />
</path>

<path name="media-speaker">
<ctl name="Sample Rate 3" value="48kHz" />
<ctl name="ISRC4 FSL" value="SYNCCLK rate 3" />
<ctl name="ISRC4 FSH" value="SYNCCLK rate 1" />
<ctl name="DSP5 Rate" value="SYNCCLK rate 1" />
<ctl name="DSP5L Input 1" value="AIF1RX1" />
<ctl name="DSP5L Input 2" value="AIF1RX2" />
<ctl name="ISRC4DEC1 Input" value="DSP5.1" />
<ctl name="ISRC4DEC2 Input" value="DSP5.1" />
<ctl name="AIF4TX1 Input 1" value="ISRC4DEC1" />
<ctl name="AIF4TX2 Input 1" value="ISRC4DEC2" />
<ctl name="ISRC4INT1 Input" value="AIF4RX1" />
<ctl name="ISRC4INT2 Input" value="AIF4RX2" />
<ctl name="DSP5 Aux 2" value="ISRC4INT1" />
<ctl name="DSP5 Aux 3" value="ISRC4INT2" />
<ctl name="HPOUT3L Input 1" value="AIF1RX1" />
<ctl name="HPOUT3R Input 1" value="AIF1RX2" />
<ctl name="RCV Switch" value="1" />
<ctl name="VI SENSING Switch" value="1" />
<ctl name="SPK Switch" value="1" />
</path>

<path name="media-headset">
<path name="mute-speaker" />
<path name="unmute-headset" />
<ctl name="HPOUT1 DRE Switch" value="1" />
<ctl name="HPOUT1 EDRE Switch" value="1" />
<ctl name="HPOUT1L Input 1" value="AIF1RX1" />
<ctl name="HPOUT1R Input 1" value="AIF1RX2" />
</path>

<path name="incall_nb-handset">
<path name="mute-headset" />
<path name="mute-speaker" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="CP Mode" value="Inverting" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 2" />
<ctl name="DSP4 Rate" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="DSP4 Firmware" value="RX_NB" />
<ctl name="DSP4 Aux 1" value="ASRC1IN2L" />
<ctl name="DSP4 Aux 2" value="ISRC2DEC1" />
<ctl name="ISRC2INT1 Input" value="DSP4.3" />
<ctl name="HPOUT3L Input 2 Volume" value="0" />
<ctl name="HPOUT3R Input 2 Volume" value="0" />
<ctl name="HPOUT3L Input 2" value="ISRC2INT1" />
<ctl name="HPOUT3R Input 2" value="ISRC2INT1" />
<ctl name="HPOUT3L Input 2 Volume" value="6" />
<ctl name="HPOUT3R Input 2 Volume" value="6" />
<ctl name="HPOUT3L Input 1" value="AIF1RX1" />
<ctl name="HPOUT3R Input 1" value="AIF1RX2" />
<ctl name="RCV Switch" value="1" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 2" value="ISRC2INT1" />
<ctl name="AIF1TX2 Input 2" value="ISRC2INT1" />
</path>

<path name="incall_nb-speaker">
<path name="mute-headset" />
<path name="unmute-speaker" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 2" />
<ctl name="DSP4 Rate" value="SYNCCLK rate 2" />
<ctl name="DSP5 Rate" value="SYNCCLK rate 1" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="DSP4 Firmware" value="RX_NB" />
<ctl name="DSP4 Aux 1" value="ASRC1IN2L" />
<ctl name="DSP4 Aux 2" value="ISRC2DEC2" />
<ctl name="ISRC2INT1 Input" value="DSP4.3" />
<ctl name="LHPF4 Input 1" value="AIF1RX1" />
<ctl name="LHPF4 Input 2 Volume" value="0" />
<ctl name="LHPF4 Input 2" value="ISRC2INT1" />
<ctl name="LHPF4 Input 2 Volume" value="6" />
<ctl name="DSP5L Input 1" value="LHPF4" />
<ctl name="DSP5L Input 2" value="LHPF4" />
<ctl name="AIF4TX1 Input 1" value="DSP5.1" />
<ctl name="AIF4TX2 Input 1" value="DSP5.1" />
<ctl name="DSP5 Aux 2" value="AIF4RX1" />
<ctl name="DSP5 Aux 3" value="AIF4RX2" />
<ctl name="VI SENSING Switch" value="1" />
<ctl name="SPK Switch" value="1" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 2" value="ISRC2INT1" />
<ctl name="AIF1TX2 Input 2" value="ISRC2INT1" />
</path>

<path name="incall_nb-headset">
<path name="mute-speaker" />
<path name="unmute-headset" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 1" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="ASRC1IN2R Input" value="AIF2RX1" />
<ctl name="HPOUT1L Input 2" value="ASRC1IN2L" />
<ctl name="HPOUT1R Input 2" value="ASRC1IN2L" />
<ctl name="HPOUT1L Input 1" value="AIF1RX1" />
<ctl name="HPOUT1R Input 1" value="AIF1RX2" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 2" value="ASRC1IN2L" />
<ctl name="AIF1TX2 Input 2" value="ASRC1IN2L" />
</path>

<path name="incall_nb-bt-sco-headset">
<path name="mute-headset" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="Sample Rate 2" value="8kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 1" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="AIF3TX1 Input 1" value="ISRC2DEC3" />
<ctl name="AIF3TX2 Input 1" value="ISRC2DEC4" />
<ctl name="AIF3TX1 Input 2" value="ISRC2DEC1" />
<ctl name="AIF3TX2 Input 2" value="ISRC2DEC2" />
<ctl name="ISRC2DEC1 Input" value="ASRC1IN2L" />
<ctl name="ISRC2DEC2 Input" value="ASRC1IN2R" />
<ctl name="ISRC2DEC3 Input" value="AIF1RX1" />
<ctl name="ISRC2DEC4 Input" value="AIF1RX2" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="ASRC1IN2R Input" value="AIF2RX2" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 2" value="ASRC1IN2L" />
<ctl name="AIF1TX2 Input 2" value="ASRC1IN2R" />
</path>

<!-- WB -->
<path name="incall_wb-handset">
<path name="mute-headset" />
<path name="mute-speaker" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="CP Mode" value="Inverting" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 2" />
<ctl name="DSP4 Rate" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="DSP4 Firmware" value="RX_WB" />
<ctl name="DSP4 Aux 1" value="ASRC1IN2L" />
<ctl name="DSP4 Aux 2" value="ISRC2DEC1" />
<ctl name="ISRC2INT1 Input" value="DSP4.3" />
<ctl name="HPOUT3L Input 2 Volume" value="0" />
<ctl name="HPOUT3R Input 2 Volume" value="0" />
<ctl name="HPOUT3L Input 2" value="ISRC2INT1" />
<ctl name="HPOUT3R Input 2" value="ISRC2INT1" />
<ctl name="HPOUT3L Input 2 Volume" value="6" />
<ctl name="HPOUT3R Input 2 Volume" value="6" />
<ctl name="HPOUT3L Input 1" value="AIF1RX1" />
<ctl name="HPOUT3R Input 1" value="AIF1RX2" />
<ctl name="RCV Switch" value="1" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 2" value="ISRC2INT1" />
<ctl name="AIF1TX2 Input 2" value="ISRC2INT1" />
</path>

<path name="incall_wb-speaker">
<path name="mute-headset" />
<path name="unmute-speaker" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 2" />
<ctl name="DSP4 Rate" value="SYNCCLK rate 2" />
<ctl name="DSP5 Rate" value="SYNCCLK rate 1" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="DSP4 Firmware" value="RX_WB" />
<ctl name="DSP4 Aux 1" value="ASRC1IN2L" />
<ctl name="DSP4 Aux 2" value="ISRC2DEC2" />
<ctl name="ISRC2INT1 Input" value="DSP4.3" />
<ctl name="LHPF4 Input 1" value="AIF1RX1" />
<ctl name="LHPF4 Input 2 Volume" value="0" />
<ctl name="LHPF4 Input 2" value="ISRC2INT1" />
<ctl name="LHPF4 Input 2 Volume" value="27" />
<ctl name="DSP5L Input 1" value="LHPF4" />
<ctl name="DSP5L Input 2" value="LHPF4" />
<ctl name="AIF4TX1 Input 1" value="DSP5.1" />
<ctl name="AIF4TX2 Input 1" value="DSP5.1" />
<ctl name="DSP5 Aux 2" value="AIF4RX1" />
<ctl name="DSP5 Aux 3" value="AIF4RX2" />
<ctl name="VI SENSING Switch" value="1" />
<ctl name="SPK Switch" value="1" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 2" value="ISRC2INT1" />
<ctl name="AIF1TX2 Input 2" value="ISRC2INT1" />
</path>

<path name="incall_wb-headset">
<path name="incall_nb-headset" />
</path>

<path name="incall_wb-bt-sco-headset">
<path name="mute-headset" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 1" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="AIF3TX1 Input 1" value="ISRC2DEC3" />
<ctl name="AIF3TX2 Input 1" value="ISRC2DEC4" />
<ctl name="AIF3TX1 Input 2" value="ISRC2DEC1" />
<ctl name="AIF3TX2 Input 2" value="ISRC2DEC2" />
<ctl name="ISRC2DEC1 Input" value="ASRC1IN2L" />
<ctl name="ISRC2DEC2 Input" value="ASRC1IN2R" />
<ctl name="ISRC2DEC3 Input" value="AIF1RX1" />
<ctl name="ISRC2DEC4 Input" value="AIF1RX2" />
<ctl name="ASRC1IN2L Input" value="AIF2RX1" />
<ctl name="ASRC1IN2R Input" value="AIF2RX2" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 2" value="ASRC1IN2L" />
<ctl name="AIF1TX2 Input 2" value="ASRC1IN2R" />
</path>

<path name="media-bt-sco-headset">
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="AIF3TX1 Input 1" value="ISRC2DEC1" />
<ctl name="AIF3TX2 Input 1" value="ISRC2DEC2" />
<ctl name="ISRC2DEC1 Input" value="AIF1RX1" />
<ctl name="ISRC2DEC2 Input" value="AIF1RX2" />
</path>

<!-- Input stage -->
<path name="main-mic">
<ctl name="LHPF1 Input 1" value="IN1L" />
<ctl name="Main Mic Switch" value="1" />
</path>

<path name="2nd-mic">
<ctl name="LHPF2 Input 1" value="IN3L" />
<ctl name="Sub Mic Switch" value="1" />
</path>

<path name="3rd-mic">
<ctl name="LHPF2 Input 1" value="IN4R" />
<ctl name="Third Mic Switch" value="1" />
</path>

<path name="media-bt-sco-headset-in">
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ISRC2INT1 Input" value="AIF3RX1" />
<ctl name="ISRC2INT2 Input" value="AIF3RX2" />
<ctl name="AIF1TX1 Input 1" value="ISRC2INT1" />
<ctl name="AIF1TX2 Input 1" value="ISRC2INT2" />
</path>

<!-- NB -->
<path name="incall_nb-handset-mic">
<ctl name="Headset Mic Switch" value="0" />
<ctl name="Main Mic Switch" value="1" />
<ctl name="Sub Mic Switch" value="1" />
<ctl name="Sample Rate 3" value="8kHz" />
<ctl name="DSP2 Rate" value="SYNCCLK rate 3" />
<ctl name="DSP3 Rate" value="SYNCCLK rate 3" />
<ctl name="ISRC1 FSL" value="SYNCCLK rate 3" />
<ctl name="ISRC1 FSH" value="SYNCCLK rate 1" />
<ctl name="ISRC3 FSL" value="SYNCCLK rate 3" />
<ctl name="ISRC3 FSH" value="SYNCCLK rate 2" />
<ctl name="ISRC1DEC1 Input" value="IN1L" />
<ctl name="ISRC2DEC1 Input" value="IN1L" />
<ctl name="ISRC1DEC2 Input" value="IN3L" />
<ctl name="LHPF3 Input 1" value="AIF1RX1" />
<ctl name="LHPF3 Input 2" value="ISRC2INT1" />
<ctl name="ISRC1DEC4 Input" value="LHPF3" />
<ctl name="DSP2 Firmware" value="TX_NB" />
<ctl name="DSP3 Firmware" value="TX_NB" />
<ctl name="DSP2 Aux 6" value="ISRC2DEC1" />
<ctl name="DSP3 Virtual Input" value="Shared Memory" />
<ctl name="DSP3L Input 1" value="ISRC1DEC1" />
<ctl name="DSP3R Input 1" value="ISRC1DEC2" />
<ctl name="DSP3 Aux 1" value="ISRC1DEC4" />
<ctl name="ISRC3INT1 Input" value="DSP3.1" />
<ctl name="ASRC1IN1L Input" value="ISRC3INT1" />
<ctl name="ASRC1IN1R Input" value="ISRC3INT1" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1R" />
<!-- Call recording route -->
<ctl name="ISRC1INT1 Input" value="DSP3.1" />
<ctl name="LHPF1 Input 1" value="ISRC1INT1" />
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
</path>

<path name="incall_nb-speaker-mic">
<ctl name="Headset Mic Switch" value="0" />
<ctl name="Main Mic Switch" value="1" />
<ctl name="Sub Mic Switch" value="1" />
<ctl name="Sample Rate 3" value="8kHz" />
<ctl name="DSP2 Rate" value="SYNCCLK rate 3" />
<ctl name="DSP3 Rate" value="SYNCCLK rate 3" />
<ctl name="ISRC1 FSL" value="SYNCCLK rate 3" />
<ctl name="ISRC1 FSH" value="SYNCCLK rate 1" />
<ctl name="ISRC3 FSL" value="SYNCCLK rate 3" />
<ctl name="ISRC3 FSH" value="SYNCCLK rate 2" />
<ctl name="ISRC1DEC1 Input" value="IN1L" />
<ctl name="ISRC1DEC2 Input" value="IN3L" />
<ctl name="ISRC2DEC2 Input" value="IN3L" />
<ctl name="ISRC1DEC4 Input" value="DSP5.1" />
<ctl name="DSP2 Firmware" value="TX_NB" />
<ctl name="DSP3 Firmware" value="TX_NB" />
<ctl name="DSP2 Aux 6" value="ISRC1DEC2" />
<ctl name="DSP3 Virtual Input" value="Shared Memory" />
<ctl name="DSP3L Input 1" value="ISRC1DEC2" />
<ctl name="DSP3R Input 1" value="ISRC1DEC1" />
<ctl name="DSP3 Aux 1" value="ISRC1DEC4" />
<ctl name="ISRC3INT1 Input" value="DSP3.1" />
<ctl name="ASRC1IN1L Input" value="ISRC3INT1" />
<ctl name="ASRC1IN1R Input" value="ISRC3INT1" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1R" />
<!-- Call recording route -->
<ctl name="ISRC1INT1 Input" value="DSP3.1" />
<ctl name="LHPF2 Input 1" value="ISRC1INT1" />
<ctl name="AIF1TX1 Input 1" value="LHPF2" />
<ctl name="AIF1TX2 Input 1" value="LHPF2" />
</path>

(Put space on this LINE please............) :cool:
I can't put all text so I will add more
 
Last edited by a moderator:
  • Like
Reactions: progamfa23

Johannesdavidsen

Senior Member
Jan 22, 2020
75
15
33
Upernavik
Here is the part of xml text:
<path name="incall_nb-headset-mic">
<ctl name="Headset Mic Switch" value="1" />
<ctl name="ASRC1IN1L Input" value="IN2L" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1L" />
<!-- Call recording route -->
<ctl name="LHPF1 Input 1" value="IN2L" />
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
</path>

<path name="incall_nb-bt-sco-headset-in">
<path name="mute-speaker" />
<ctl name="Sample Rate 2" value="8kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 1" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ISRC2INT1 Input" value="AIF3RX1" />
<ctl name="ISRC2INT2 Input" value="AIF3RX2" />
<ctl name="ASRC1IN1L Input" value="ISRC2INT1" />
<ctl name="ASRC1IN1R Input" value="ISRC2INT2" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1R" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 1" value="ISRC2INT1" />
<ctl name="AIF1TX2 Input 1" value="ISRC2INT2" />
</path>

<!-- WB -->
<path name="incall_wb-handset-mic">
<ctl name="Headset Mic Switch" value="0" />
<ctl name="Main Mic Switch" value="1" />
<ctl name="Sub Mic Switch" value="1" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="DSP2 Rate" value="SYNCCLK rate 2" />
<ctl name="DSP3 Rate" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="EQ1 Input 1" value="IN1L" />
<ctl name="EQ2 Input 1" value="IN3L" />
<ctl name="ISRC2DEC1 Input" value="EQ1" />
<ctl name="ISRC2DEC2 Input" value="EQ2" />
<ctl name="LHPF3 Input 1" value="AIF1RX1" />
<ctl name="LHPF3 Input 2" value="ISRC2INT1" />
<ctl name="ISRC2DEC4 Input" value="LHPF3" />
<ctl name="DSP2 Firmware" value="TX_WB" />
<ctl name="DSP3 Firmware" value="TX_WB" />
<ctl name="DSP2 Aux 6" value="ISRC2DEC1" />
<ctl name="DSP3 Virtual Input" value="Shared Memory" />
<ctl name="DSP3L Input 1" value="ISRC2DEC1" />
<ctl name="DSP3R Input 1" value="ISRC2DEC2" />
<ctl name="DSP3 Aux 1" value="ISRC2DEC4" />
<ctl name="ASRC1IN1L Input" value="DSP3.1" />
<ctl name="ASRC1IN1R Input" value="DSP3.1" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1R" />
<!-- Call recording route -->
<ctl name="ISRC2INT2 Input" value="DSP3.1" />
<ctl name="LHPF1 Input 1" value="ISRC2INT2" />
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
</path>

<path name="incall_wb-speaker-mic">
<ctl name="Headset Mic Switch" value="0" />
<ctl name="Main Mic Switch" value="1" />
<ctl name="Sub Mic Switch" value="1" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="DSP2 Rate" value="SYNCCLK rate 2" />
<ctl name="DSP3 Rate" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="EQ3 Input 1" value="IN1L" />
<ctl name="EQ4 Input 1" value="IN3L" />
<ctl name="ISRC2DEC1 Input" value="EQ3" />
<ctl name="ISRC2DEC2 Input" value="EQ4" />
<ctl name="ISRC2DEC4 Input" value="DSP5.1" />
<ctl name="DSP2 Firmware" value="TX_WB" />
<ctl name="DSP3 Firmware" value="TX_WB" />
<ctl name="DSP2 Aux 6" value="ISRC2DEC2" />
<ctl name="DSP3 Virtual Input" value="Shared Memory" />
<ctl name="DSP3L Input 1" value="ISRC2DEC2" />
<ctl name="DSP3R Input 1" value="ISRC2DEC1" />
<ctl name="DSP3 Aux 1" value="ISRC2DEC4" />
<ctl name="ASRC1IN1L Input" value="DSP3.1" />
<ctl name="ASRC1IN1R Input" value="DSP3.1" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1R" />
<!-- Call recording route -->
<ctl name="ISRC2INT2 Input" value="DSP3.1" />
<ctl name="LHPF2 Input 1" value="ISRC2INT2" />
<ctl name="AIF1TX1 Input 1" value="LHPF2" />
<ctl name="AIF1TX2 Input 1" value="LHPF2" />
</path>

<path name="incall_wb-headset-mic">
<path name="incall_nb-headset-mic" />
</path>

<path name="incall_wb-bt-sco-headset-in">
<path name="mute-speaker" />
<ctl name="Sample Rate 2" value="16kHz" />
<ctl name="ASRC1 Rate 1" value="SYNCCLK rate 1" />
<ctl name="ISRC2 FSL" value="SYNCCLK rate 2" />
<ctl name="ISRC2 FSH" value="SYNCCLK rate 1" />
<ctl name="ISRC2INT1 Input" value="AIF3RX1" />
<ctl name="ISRC2INT2 Input" value="AIF3RX2" />
<ctl name="ASRC1IN1L Input" value="ISRC2INT1" />
<ctl name="ASRC1IN1R Input" value="ISRC2INT2" />
<ctl name="AIF2TX1 Input 1" value="ASRC1IN1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1IN1R" />
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 1" value="ISRC2INT1" />
<ctl name="AIF1TX2 Input 1" value="ISRC2INT2" />
</path>

<!-- Output volume stage -->
<!-- media playback volume -->
<path name="gain-media-handset">
<ctl name="HPOUT3L Input 1 Volume" value="4" />
<ctl name="HPOUT3R Input 1 Volume" value="4" />
</path>

<path name="gain-media-speaker">
<ctl name="DSP5L Input 1 Volume" value="20" />
<ctl name="DSP5L Input 2 Volume" value="20" />
<ctl name="HPOUT3L Input 1 Volume" value="5" />
<ctl name="HPOUT3R Input 1 Volume" value="5" />
<ctl name="AIF4TX1 Input 1 Volume" value="24" />
<ctl name="AIF4TX2 Input 1 Volume" value="24" />
</path>

<path name="gain-media-headset">
<ctl name="Noise Gate Switch" value="0" />
<ctl name="HPOUT1L Impedance Volume" value="102" />
<ctl name="HPOUT1R Impedance Volume" value="102" />
<ctl name="HPOUT1L Input 1 Volume" value="4" />
<ctl name="HPOUT1R Input 1 Volume" value="4" />
</path>

<path name="gain-media-speaker-headset">
<ctl name="DSP5L Input 1 Volume" value="20" />
<ctl name="DSP5L Input 2 Volume" value="20" />
<ctl name="AIF4TX1 Input 1 Volume" value="4" />
<ctl name="AIF4TX2 Input 1 Volume" value="4" />
<ctl name="Noise Gate Switch" value="0" />
<ctl name="HPOUT1L Impedance Volume" value="52" />
<ctl name="HPOUT1R Impedance Volume" value="52" />
<ctl name="HPOUT1L Input 1 Volume" value="4" />
<ctl name="HPOUT1R Input 1 Volume" value="4" />
</path>

<path name="gain-media-bt-sco-headset">
<ctl name="AIF3TX1 Input 1 Volume" value="4" />
<ctl name="AIF3TX2 Input 1 Volume" value="4" />
</path>

<path name="gain-media-bt-sco-headset-in">
<ctl name="AIF1TX1 Input 1 Volume" value="4" />
<ctl name="AIF1TX2 Input 1 Volume" value="4" />
</path>

<!-- NB volume -->
<path name="gain-incall_nb-handset">
<ctl name="HPOUT3L Input 1 Volume" value="6" />
<ctl name="HPOUT3R Input 1 Volume" value="6" />
<ctl name="HPOUT3L Input 2 Volume" value="6" />
<ctl name="HPOUT3R Input 2 Volume" value="6" />
<param name="DSP4 XM f010:0" value="0 0 0 1 0 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 5 0 0 0 7 0 0 0 9 0 0 0 11 0 0 0 13 0 0 0 4 0 0 0 4 0 0 0 18 0 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 1" />
<param name="DSP4 XM f010:1" value="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3" />
</path>

<path name="gain-incall_nb-speaker">
<ctl name="DSP5L Input 1 Volume" value="25" />
<ctl name="DSP5L Input 2 Volume" value="25" />
<ctl name="AIF4TX1 Input 1 Volume" value="6" />
<ctl name="AIF4TX2 Input 1 Volume" value="6" />
<param name="DSP4 XM f010:0" value="0 0 0 1 0 0 0 32 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 4 0 0 0 6 0 0 0 8 0 0 0 10 0 0 0 10 0 0 0 4 0 0 0 4 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1" />
<param name="DSP4 XM f010:1" value="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3" />
</path>

<path name="gain-incall_nb-headset">
<ctl name="Noise Gate Switch" value="0" />
<ctl name="HPOUT1L Impedance Volume" value="106" />
<ctl name="HPOUT1R Impedance Volume" value="106" />
<ctl name="HPOUT1L Input 1 Volume" value="6" />
<ctl name="HPOUT1R Input 1 Volume" value="6" />
<ctl name="HPOUT1L Input 2 Volume" value="6" />
<ctl name="HPOUT1R Input 2 Volume" value="6" />
</path>

<path name="gain-incall_nb-bt-sco-headset">
<ctl name="AIF3TX1 Input 1 Volume" value="6" />
<ctl name="AIF3TX2 Input 1 Volume" value="6" />
<ctl name="AIF3TX1 Input 2 Volume" value="6" />
<ctl name="AIF3TX2 Input 2 Volume" value="6" />
</path>

<!-- WB volume -->
<path name="gain-incall_wb-handset">
<ctl name="HPOUT3L Input 1 Volume" value="6" />
<ctl name="HPOUT3R Input 1 Volume" value="6" />
<ctl name="HPOUT3L Input 2 Volume" value="6" />
<ctl name="HPOUT3R Input 2 Volume" value="6" />
<param name="DSP4 XM f011:0" value="0 0 0 1 0 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 5 0 0 0 7 0 0 0 9 0 0 0 11 0 0 0 13 0 0 0 4 0 0 0 4 0 0 0 18 0 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 1" />
<param name="DSP4 XM f011:1" value="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3" />
</path>

<path name="gain-incall_wb-speaker">
<ctl name="DSP5L Input 1 Volume" value="25" />
<ctl name="DSP5L Input 2 Volume" value="25" />
<ctl name="AIF4TX1 Input 1 Volume" value="6" />
<ctl name="AIF4TX2 Input 1 Volume" value="6" />
<param name="DSP4 XM f011:0" value="0 0 0 1 0 0 0 32 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 4 0 0 0 6 0 0 0 8 0 0 0 10 0 0 0 10 0 0 0 4 0 0 0 4 0 0 0 18 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1" />
<param name="DSP4 XM f011:1" value="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3" />
</path>

<path name="gain-incall_wb-headset">
<ctl name="Noise Gate Switch" value="0" />
<ctl name="HPOUT1L Impedance Volume" value="106" />
<ctl name="HPOUT1R Impedance Volume" value="106" />
<ctl name="HPOUT1L Input 1 Volume" value="6" />
<ctl name="HPOUT1R Input 1 Volume" value="6" />
<ctl name="HPOUT1L Input 2 Volume" value="6" />
<ctl name="HPOUT1R Input 2 Volume" value="6" />
</path>

<path name="gain-incall_wb-bt-sco-headset">
<ctl name="AIF3TX1 Input 1 Volume" value="6" />
<ctl name="AIF3TX2 Input 1 Volume" value="6" />
</path>

<!-- Input stage volume -->
<!-- media input volume -->
<path name="gain-media-mic">
<ctl name="IN1L Digital Volume" value="127" />
<ctl name="LHPF1 Input 1 Volume" value="4" />
</path>

<path name="gain-media-headset-mic">
<ctl name="IN2L Volume" value="27" />
<ctl name="IN2L Digital Volume" value="106" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
</path>

<!-- NB volume -->
<path name="gain-incall_nb-handset-mic">
<ctl name="IN1L Digital Volume" value="115" />
<ctl name="IN3L Digital Volume" value="115" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
<param name="DSP3 XM f002:0" value="0 0 0 0 0 0 2 71 0 0 0 0 0 0 0 0 0 0 0 80 0 0 0 80 0 0 1 0 0 0 0 1 0 0 0 2 0 0 0 2 0 0 0 0 0 0 1 0 0 0 0 3 0 0 0 122 0 0 0 120 0 4 0 0 0 4 0 0 0 1 0 0 0 14 202 78 0 8 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 8 0 0 0 8 0 0 0 0 0 0 0 0 0 0 0 5 85 85 0 8 0 0 0 0 0 64 0 0 0 64 0 1 0 0 0 1 0 0 0 2 0 0 0 0 0 0 0 12 0 0 0 0 0 11 0 0 0 16 0 8 0 0 0 16 0 0 0 0 0 1 0 0 0 8 0 0 0 16 0 8 0 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 160 0 0 254 192 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 0 5 0 16 0 0 0 0 0 6 0 0 0 0 0 1 128 0 0 1 0 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 0 0 0 0 11 51 51 0 8 0 0 0 0 0 4 0 0 0 5 0 15 64 0 0 15 192 0 0 15 192 0 0 15 192 0 0 15 192 0 0 15 192 0 0 15 192 0 0 0 0 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 1 128 0 0 0 0 0 0 16 0 0 0 4 0 0 0 3 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 8 0 0 0 48 0 12 0 0 0 3 85 85 0 4 0 0 0 4 0 0 0 4 0 0 0 4 0 0 0 8 0 0 0 8 0 0 0 1 30 184 0 4 0 0 0 1 69 91 0 0 230 85" />
<param name="DSP3 XM f002:1" value="0 0 230 85 0 0 230 85 0 0 230 85 0 1 69 91 0 0 230 85 0 0 230 85 0 15 133 30 0 1 153 154 0 0 0 16 0 1 0 0 0 0 0 0 0 1 64 0 0 0 41 95 0 6 0 0 0 0 0 0 0 0 0 100 0 1 174 16 0 0 12 0 0 14 79 103 0 4 0 0 0 4 0 0 0 0 16 0 0 15 128 0 0 6 0 0 0 15 246 0 0 1 208 0 0 3 0 0 0 5 64 0 0 13 192 0 0 0 0 0 0 0 0 0 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 0 2 0 3 51 51 0 0 224 0 0 0 4 76 0 0 51 64 0 0 0 37 0 0 0 0 0 0 0 0 0 0 0 15 0 217 25 125 0 3 0 0 0 0 64 0 0 0 16 0 0 4 0 0 0 1 153 154 0 2 238 0 0 9 153 153 0 12 0 0 0 13 153 153 0 13 0 0 0 2 64 0 0 2 66 147 0 0 0 3 0 0 0 65 0 4 0 0 0 0 0 126 0 1 0 0 0 0 0 0 0 255 255 216 0 11 59 0 0 2 66 147 0 2 66 147 0 2 66 147 0 2 66 147 0 2 66 147 0 2 66 147 0 1 69 91 0 2 66 147 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 13 153 153 0 8 0 0 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 0 179 51 0 0 32 0 0 4 0 0 0 0 0 40 0 16 0 0 0 255 255 241 0 0 250 0 0 0 143 192 0 6 89 0 0 12 53 0 0 12 53 0 0 2 238 0 0 0 1 64 0 12 204 192 0 255 255 239 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 0 0 1 0 0 20 160 0 0 20 160 0 0 20 160 0 0 5 32 0 0 25 192 0 16 0 0 0 1 179 64 0 16 0 0 0 16 0 0 0 0 0 0 0 0 165 165" />
</path>

<path name="gain-incall_nb-speaker-mic">
<ctl name="IN1L Digital Volume" value="105" />
<ctl name="IN3L Digital Volume" value="125" />
<ctl name="LHPF2 Input 1 Volume" value="6" />
<param name="DSP3 XM f002:0" value="0 0 0 1 0 0 2 71 0 0 0 0 0 0 0 0 0 0 0 80 0 0 0 80 0 0 1 0 0 0 0 1 0 0 0 2 0 0 0 2 0 0 0 1 0 0 1 0 0 0 0 3 0 0 0 122 0 0 0 120 0 4 0 0 0 4 0 0 0 4 0 0 0 14 202 78 0 8 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 8 0 0 0 8 0 0 0 0 0 0 0 0 0 0 0 5 85 85 0 8 0 0 0 0 0 64 0 0 0 64 0 0 64 0 0 0 64 0 0 2 0 0 0 0 0 1 0 8 0 0 0 0 0 9 0 0 0 96 0 0 64 0 0 16 0 0 0 0 0 1 0 0 0 8 0 0 0 24 0 8 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 0 32 0 0 0 32 0 0 0 32 0 0 0 32 0 0 0 32 0 0 0 32 0 0 0 32 0 0 0 32 0 0 0 0 5 0 16 0 0 0 0 0 5 0 0 0 0 0 0 122 225 0 1 0 0 0 1 51 51 0 1 51 51 0 1 51 51 0 1 51 51 0 1 51 51 0 1 51 51 0 1 51 51 0 1 51 51 0 2 102 102 0 2 102 102 0 1 51 51 0 1 51 51 0 1 51 51 0 0 0 0 0 4 0 0 0 13 0 0 0 0 0 6 0 0 0 6 0 10 0 0 0 10 0 0 0 10 102 102 0 11 0 0 0 11 0 0 0 12 0 0 0 12 0 0 0 0 0 0 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 0 0 0 0 14 215 10 0 8 0 0 0 7 51 51 0 6 102 102 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 8 0 0 0 48 0 12 0 0 0 3 0 0 0 6 102 102 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 2 3 167 0 1 153 153" />
<param name="DSP3 XM f002:1" value="0 0 182 246 0 0 182 246 0 0 182 246 0 0 182 246 0 0 230 85 0 0 230 85 0 15 198 167 0 2 102 102 0 0 0 16 0 1 0 0 0 0 0 0 0 0 128 0 0 0 41 95 0 4 0 0 0 0 0 5 0 0 0 32 0 2 102 102 0 0 12 0 0 9 0 0 0 4 0 0 0 4 0 0 0 0 16 0 0 15 128 0 0 6 0 0 0 15 246 0 0 1 208 0 0 3 0 0 0 5 64 0 0 13 192 0 0 0 0 0 0 0 0 0 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 0 2 0 0 248 0 0 8 102 96 0 0 1 128 0 0 51 64 0 0 0 37 0 0 0 0 0 0 0 0 0 0 0 15 0 85 215 41 0 3 0 0 0 0 16 0 0 0 64 0 0 5 0 0 0 1 153 154 0 2 238 0 0 9 196 0 0 12 0 0 0 13 153 153 0 13 0 0 0 2 64 0 0 2 137 44 0 0 0 3 0 0 0 65 0 4 0 0 0 0 0 126 0 1 0 0 0 0 0 0 0 255 255 216 0 11 59 0 0 8 255 89 0 5 15 68 0 5 15 68 0 2 3 167 0 2 3 167 0 0 230 85 0 2 137 44 0 2 3 167 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 15 198 167 0 15 198 167 0 15 198 167 0 15 198 167 0 15 198 167 0 15 235 133 0 15 198 167 0 15 198 167 0 0 179 51 0 0 45 51 0 4 0 0 0 0 0 100 0 16 0 0 0 255 255 241 0 0 250 0 0 0 143 192 0 6 89 0 0 12 53 0 0 12 53 0 0 2 238 0 0 0 1 64 0 12 204 192 0 255 255 239 0 16 0 0 0 16 0 0 0 8 0 0 0 16 0 0 0 16 0 0 0 4 0 0 0 16 0 0 0 4 0 0 0 0 0 1 0 0 0 0 0 0 204 192 0 0 102 96 0 0 51 64 0 0 102 96 0 16 0 0 0 1 179 64 0 0 0 0 0 16 0 0 0 0 0 0 0 0 165 165" />
</path>

<path name="gain-incall_nb-headset-mic">
<ctl name="IN2L Volume" value="19" />
<ctl name="IN2L Digital Volume" value="106" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
</path>

<path name="gain-incall_nb-bt-sco-headset-in">
<ctl name="AIF2TX1 Input 1 Volume" value="6" />
<ctl name="AIF2TX2 Input 1 Volume" value="6" />
<ctl name="AIF1TX1 Input 1 Volume" value="6" />
<ctl name="AIF1TX2 Input 1 Volume" value="6" />
</path>

<!-- WB volume -->
<path name="gain-incall_wb-handset-mic">
<ctl name="IN1L Digital Volume" value="115" />
<ctl name="IN3L Digital Volume" value="115" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
<param name="DSP3 XM f003:0" value="0 0 0 0 0 0 2 71 0 0 0 0 0 0 0 1 0 0 0 160 0 0 0 160 0 0 2 0 0 0 0 1 0 0 0 2 0 0 0 2 0 0 0 0 0 0 2 0 0 0 0 3 0 0 0 242 0 0 0 240 0 4 0 0 0 4 0 0 0 4 0 0 0 15 98 57 0 8 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 8 0 0 0 8 0 0 0 0 0 0 0 0 0 0 0 5 85 85 0 8 0 0 0 0 0 64 0 0 0 64 0 1 0 0 0 1 0 0 0 2 0 0 0 0 0 0 0 12 0 0 0 0 0 11 0 0 0 64 0 8 0 0 0 16 0 0 0 0 0 1 0 0 0 8 0 0 0 16 0 8 0 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 254 192 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 0 0 0 0 64 0 0 0 0 5 0 16 0 0 0 0 0 5 0 0 0 0 0 1 153 153 0 1 0 0 0 1 153 153 0 4 0 0 0 4 0 0 0 4 0 0 0 1 192 0 0 1 192 0 0 1 192 0 0 1 192 0 0 1 192 0 0 1 192 0 0 4 0 0 0 4 0 0 0 4 0 0 0 0 0 0 0 11 51 51 0 9 153 153 0 0 0 4 0 0 0 5 0 8 0 0 0 8 0 0 0 14 102 102 0 14 102 102 0 14 102 102 0 14 102 102 0 14 102 102 0 0 0 0 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 0 0 0 0 11 153 153 0 4 0 0 0 3 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 8 0 0 0 48 0 8 0 0 0 4 0 0 0 4 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 4 0 0 0 1 0 0 0 8 0 0 0 2 137 44 0 1 69 91" />
<param name="DSP3 XM f003:1" value="0 0 230 85 0 2 3 167 0 2 3 167 0 2 216 98 0 1 153 153 0 1 69 91 0 15 133 30 0 1 153 154 0 0 0 16 0 1 0 0 0 0 0 0 0 1 64 0 0 0 41 95 0 6 0 0 0 0 0 0 0 0 0 100 0 1 174 16 0 0 12 0 0 14 79 103 0 4 0 0 0 4 0 0 0 0 16 0 0 15 128 0 0 6 0 0 0 15 246 0 0 1 208 0 0 3 0 0 0 5 64 0 0 13 192 0 0 0 0 0 0 0 0 0 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 0 1 0 3 51 51 0 0 224 0 0 0 4 76 0 0 51 64 0 0 0 37 0 0 0 0 0 0 0 0 0 0 0 26 0 169 121 48 0 3 0 0 0 0 64 0 0 0 16 0 0 4 0 0 0 1 153 154 0 2 238 0 0 9 153 153 0 12 0 0 0 13 153 153 0 13 0 0 0 2 64 0 0 2 66 147 0 0 0 3 0 0 0 65 0 4 0 0 0 0 0 240 0 0 128 0 0 0 0 1 0 255 255 216 0 11 59 0 0 2 216 98 0 4 4 222 0 1 69 91 0 5 15 68 0 5 15 68 0 7 37 157 0 2 66 147 0 2 66 147 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 15 133 30 0 0 179 51 0 0 35 231 0 4 0 0 0 0 0 40 0 16 0 0 0 255 255 241 0 0 187 128 0 0 143 192 0 6 89 0 0 13 47 0 0 12 53 0 0 2 238 0 0 0 1 64 0 12 204 192 0 255 255 239 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 0 0 1 0 0 20 160 0 0 20 160 0 0 20 160 0 0 5 32 0 0 25 192 0 16 0 0 0 1 179 64 0 16 0 0 0 16 0 0 0 0 0 0 0 0 90 90" />
</path>

<path name="gain-incall_wb-speaker-mic">
<ctl name="IN1L Digital Volume" value="105" />
<ctl name="IN3L Digital Volume" value="115" />
<ctl name="LHPF2 Input 1 Volume" value="6" />
<param name="DSP3 XM f003:0" value="0 0 0 1 0 0 2 71 0 0 0 0 0 0 0 1 0 0 0 160 0 0 0 160 0 0 2 0 0 0 0 1 0 0 0 2 0 0 0 2 0 0 0 0 0 0 2 0 0 0 0 3 0 0 0 242 0 0 0 240 0 4 0 0 0 4 0 0 0 4 0 0 0 15 98 57 0 8 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 8 0 0 0 8 0 0 0 0 0 0 0 0 0 0 0 4 0 0 0 5 85 85 0 0 0 64 0 0 0 64 0 0 64 0 0 0 64 0 0 6 0 0 0 0 0 1 0 8 0 0 0 0 0 9 0 0 0 96 0 0 64 0 0 16 0 0 0 0 0 1 0 0 0 8 0 0 0 16 0 8 0 0 0 254 160 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 255 0 0 0 0 32 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 64 0 0 0 0 5 0 16 0 0 0 0 0 5 0 0 0 0 0 1 153 153 0 1 0 0 0 4 0 0 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 1 153 153 0 12 204 192 0 12 204 192 0 12 204 192 0 12 204 192 0 12 204 192 0 0 0 0 0 8 0 0 0 14 0 0 0 0 0 8 0 0 0 8 0 14 172 0 0 15 51 64 0 8 202 0 0 11 59 0 0 10 252 128 0 10 65 0 0 8 202 0 0 0 0 0 0 3 51 64 0 3 51 64 0 3 51 64 0 3 51 64 0 3 51 64 0 3 51 64 0 16 0 0 0 0 0 0 0 14 51 51 0 8 0 0 0 7 0 0 0 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 8 0 0 0 48 0 16 0 0 0 2 0 0 0 4 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 2 137 44 0 2 0 0" />
<param name="DSP3 XM f003:1" value="0 2 0 0 0 2 0 0 0 2 0 0 0 2 0 0 0 2 0 0 0 2 0 0 0 15 194 143 0 2 102 102 0 0 0 16 0 1 0 0 0 0 0 1 0 0 128 0 0 0 41 95 0 4 0 0 0 0 0 8 0 0 0 128 0 2 102 102 0 0 12 0 0 8 79 103 0 4 0 0 0 4 0 0 0 0 16 0 0 15 128 0 0 6 0 0 0 15 246 0 0 1 208 0 0 3 0 0 0 5 64 0 0 13 192 0 0 0 0 0 0 0 0 0 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 102 102 0 0 0 2 0 0 248 0 0 8 102 96 0 0 1 128 0 0 51 64 0 0 0 37 0 0 0 0 0 0 0 0 0 0 0 26 0 169 121 48 0 3 0 0 0 0 16 0 0 0 64 0 0 5 0 0 0 1 153 154 0 2 238 0 0 9 196 0 0 12 0 0 0 13 153 153 0 13 0 0 0 2 64 0 0 2 0 0 0 0 0 3 0 0 0 65 0 4 0 0 0 0 0 127 0 1 0 0 0 0 0 0 0 255 255 216 0 11 59 0 0 8 255 89 0 2 137 44 0 2 137 44 0 2

Again I have to add 1 more from here......... :(
 
Last edited by a moderator:
  • Like
Reactions: progamfa23

Johannesdavidsen

Senior Member
Jan 22, 2020
75
15
33
Upernavik
Here it is:
137 44 0 2 137 44 0 2 137 44 0 2 137 44 0 2 137 44 0 8 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 12 0 0 0 15 194 143 0 15 194 143 0 15 194 143 0 15 194 143 0 15 194 143 0 15 194 143 0 15 194 143 0 0 179 51 0 0 47 225 0 4 0 0 0 0 0 40 0 16 0 0 0 255 255 241 0 0 187 128 0 0 143 192 0 6 89 0 0 13 47 0 0 12 53 0 0 2 238 0 0 0 1 64 0 12 204 192 0 255 255 239 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 16 0 0 0 0 0 1 0 0 204 192 0 0 204 192 0 0 102 96 0 0 51 64 0 0 102 96 0 16 0 0 0 1 179 64 0 0 0 0 0 0 0 100 0 4 0 0 0 0 90 90" />
</path>

<path name="gain-incall_wb-headset-mic">
<ctl name="IN2L Volume" value="19" />
<ctl name="IN2L Digital Volume" value="105" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
</path>

<path name="gain-incall_wb-headphone-mic">
<ctl name="IN1L Digital Volume" value="125" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
</path>

<path name="gain-incall_wb-bt-sco-headset-in">
<ctl name="AIF2TX1 Input 1 Volume" value="6" />
<ctl name="AIF2TX2 Input 1 Volume" value="6" />
<ctl name="AIF1TX1 Input 1 Volume" value="6" />
<ctl name="AIF1TX2 Input 1 Volume" value="6" />
</path>

<!-- recognition input volume -->
<path name="gain-recognition-mic">
<ctl name="IN1L Digital Volume" value="129" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
</path>

<path name="gain-recognition-headset-mic">
<ctl name="IN2L Volume" value="24" />
<ctl name="IN2L Digital Volume" value="105" />
<ctl name="LHPF1 Input 1 Volume" value="6" />
</path>
<!-- END - Stock Audio Gains -->

<!-- OSS Audio HAL Paths -->
<path name="none">
<!-- Empty path -->
</path>

<!-- Output -->
<path name="earpiece">
<!-- Route configuration -->
<path name="mute-speaker" />
<path name="mute-headset" />
<!-- Output configuration -->
<path name="media-handset"/>
<path name="gain-media-handset"/>
</path>

<path name="speaker">
<!-- Route configuration -->
<path name="unmute-speaker" />
<path name="mute-headset" />
<!-- Output configuration -->
<path name="media-speaker"/>
<path name="gain-media-speaker"/>
</path>

<path name="headphones">
<!-- Route configuration -->
<path name="mute-speaker" />
<path name="unmute-headset" />
<!-- Output configuration -->
<path name="media-headset"/>
<path name="gain-media-headset"/>
</path>

<path name="speaker-and-headphones">
<!-- Route configuration -->
<path name="unmute-speaker" />
<path name="unmute-headset" />
<!-- Output configuration -->
<path name="media-speaker"/>
<path name="media-headset"/>
<path name="gain-media-speaker-headset"/>
</path>

<path name="voice-earpiece">
<path name="incall_nb-handset"/>
<path name="gain-incall_nb-handset"/>
</path>

<path name="voice-earpiece-wb">
<path name="incall_wb-handset"/>
<path name="gain-incall_wb-handset"/>
</path>

<path name="voice-speaker">
<path name="incall_nb-speaker"/>
<path name="gain-incall_nb-speaker"/>
</path>

<path name="voice-speaker-wb">
<path name="incall_wb-speaker"/>
<path name="gain-incall_wb-speaker"/>
</path>

<path name="voice-headphones">
<path name="incall_nb-headset"/>
<path name="gain-incall_nb-headset"/>
</path>

<path name="voice-headphones-wb">
<path name="incall_wb-headset"/>
<path name="gain-incall_wb-headset"/>
</path>

<path name="voice-bt-sco-headset">
<path name="incall_nb-bt-sco-headset"/>
<path name="gain-incall_nb-bt-sco-headset"/>
</path>

<path name="voice-bt-sco-headset-wb">
<path name="incall_wb-bt-sco-headset"/>
<path name="gain-incall_wb-bt-sco-headset"/>
</path>

<path name="bt-sco-headset">
<path name="media-bt-sco-headset"/>
<path name="gain-media-bt-sco-headset"/>
</path>

<!-- Input -->
<path name="earpiece-mic">
<path name="capture_channel_left"/>
<path name="main-mic"/>
<path name="gain-media-mic"/>
</path>

<path name="speaker-mic">
<path name="capture_channel_left"/>
<path name="main-mic"/>
<path name="gain-media-mic"/>
</path>

<path name="headset-mic">
<!-- Call recording route -->
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
<ctl name="LHPF1 Input 1" value="IN2L"/>
<ctl name="Headset Mic Switch" value="1"/>
<path name="gain-media-headset-mic"/>
</path>

<path name="media-headset-mic">
<path name="capture_channel_left" />
<path name="headset-mic" />
</path>

<path name="voice-mic">
<path name="incall_nb-speaker-mic"/>
<path name="gain-incall_nb-speaker-mic"/>
</path>

<path name="voice-earpiece-mic">
<path name="incall_nb-handset-mic"/>
<path name="gain-incall_nb-handset-mic"/>
</path>

<path name="voice-earpiece-mic-wb">
<path name="incall_wb-handset-mic"/>
<path name="gain-incall_wb-handset-mic"/>
</path>

<path name="voice-speaker-mic">
<path name="incall_nb-speaker-mic"/>
<path name="gain-incall_nb-speaker-mic"/>
</path>

<path name="voice-speaker-mic-wb">
<path name="incall_wb-speaker-mic"/>
<path name="gain-incall_wb-speaker-mic"/>
</path>

<path name="voice-headset-mic">
<path name="incall_nb-headset-mic"/>
<path name="gain-incall_nb-headset-mic"/>
</path>

<path name="voice-headset-mic-wb">
<path name="incall_wb-headset-mic"/>
<path name="gain-incall_wb-headset-mic"/>
</path>

<path name="voice-bt-sco-mic">
<path name="incall_nb-bt-sco-headset-in"/>
<path name="gain-incall_nb-bt-sco-headset-in"/>
</path>

<path name="voice-bt-sco-mic-wb">
<path name="incall_wb-bt-sco-headset-in"/>
<path name="gain-incall_wb-bt-sco-headset-in"/>
</path>

<path name="bt-sco-mic">
<path name="media-bt-sco-headset-in"/>
<path name="gain-media-bt-sco-headset-in"/>
</path>

<path name="voice-rec-mic">
<path name="capture_channel_left"/>
<path name="main-mic"/>
<path name="gain-recognition-mic"/>
</path>

<path name="voice-rec-headset-mic">
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
<ctl name="LHPF1 Input 1" value="IN2L"/>
<ctl name="Headset Mic Switch" value="1"/>
<path name="gain-recognition-headset-mic"/>
</path>

<!-- END - OSS Audio HAL Paths -->
</mixer>

Put space here like on original file

And remember to make copy of XML file:
/system/vendor/etc/mixer_paths_0.xml
I can't attach files here so you're welcome to copy and paste.
I hope it not bad of posting here like that
 
Last edited by a moderator:
  • Like
Reactions: progamfa23

hqkingz

Member
Jul 30, 2020
13
2
Hi I'm not Dev. But it is
Can you see ?
Galaxy S6 / S6 Edge Unified Development>[ROM][G920/5-F-I-S-K-L-T-W8][10.0] UNOFFICIAL LineageOS 17.1
Edge is supported

While flashing the rom it doesn't show the Zeroltexx in supported devices. Still i flashed it and it's working smoothly now. In about section its showing Zerofltexx while my device is Zeroltexx, wl who cares ;)

Good rom excellent battery life.
Thank You.
 
  • Like
Reactions: progamfa23

Johannes89

Senior Member
Aug 12, 2020
116
5
While flashing the rom it doesn't show the Zeroltexx in supported devices. Still i flashed it and it's working smoothly now. In about section its showing Zerofltexx while my device is Zeroltexx, wl who cares ;)

Good rom excellent battery life.
Thank You.
That what I always think about they are so many works he has done he must have forgot it
Did you install latest?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 41
    2okPze5.png
    Note: This is not a ROM based on the ROM shipped with your device.

    LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github Repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    What's working:
    • Telephony (Calls, SMS, Mobile Data)
    • WiFi
    • Bluetooth
    • NFC
    • GPS (Plain Device Mode Works)
    • Fingerprint
    • Camera
    • HWC

    What's not working:
    • Fingerprint at first setup bugs the setup wizard, so skip it.
    • Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS. We may have our own implementation to similar functions, though.
    • IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS.

    Possible Problems:
    • Please keep this in mind that Android 10 is still a quite new release so it may contain major/non-major bugs.
    • Problem: Problems with modem like dropping/slow/slowly connecting data connections, missed calls/SMS
      Solution: Try to update your device's baseband/modem to the latest available version. If there are still problems, report this bug to the developers.

    Instructions:
    • Make sure TWRP has been installed and functional.
    • Download the latest build (and optionally gapps).
    • Reboot to recovery
    • Wipe data and cache (required if you switch from other ROMs)
    • Flash the latest build (and gapps)
    • Reboot

    Downloads:

    Reporting Bugs:

    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)

    Telegram Group:

    Samsung Galaxy S6 LineageOS Development: https://t.me/joinchat/GhF7_U8IaarGQ2Y08NWilg

    Donate:

    I do this in my free time and currently i work on this alone. If you want to support the project feel free to donate

    XDA:DevDB Information
    LineageOS, ROM for the Samsung Galaxy S6

    Contributors
    enesuzun2002, lukasb06, u99dev, TeamNexus
    Source Code: https://github.com/Exynos7420

    ROM OS Version: Android 10
    ROM Kernel: Linux 3.10.x

    Version Information
    Status:
    Testing

    Created 2020-02-20
    Last Updated 2020-04-14
    8
    F.A.Q.

    It is a good idea to read here before asking same question


    1- Q: How can i report a bug?
    A: Download Syslog app from Google Play Store and send me all log types and explain the bug clearly please.

    2- Q: I have a tmobile device and can't connect LTE what should i do?
    A: Try this workaround (till i find a real fix for that) by @bohica888: https://forum.xda-developers.com/showpost.php?p=81732753&postcount=602
    6
    New build is up most of the issues are fixed now.
    4
    hello enes. Fast charging is not working on my g925f. When I turn the device on and off, it charges up to 1200 mah, but when I disconnect it and plug it in, it charges between 150 - 300 mah. I am having a lot of trouble. By the way, the most stable android 10 compilation is yours. I congratulate you. I can get a long battery time and I have a very stable phone now. 😁😁

    Edit: I am fix it
    Es file manager open
    Find to / file path open init.power.rc es file text editor
    when i got to the bottom of the page i saw adaptive fast charge disable and i changed switch 1 to 0
    now my phone is charging fast 😁😁

    Quick charge 3.0 enabled.