[ROM][G925F/I][XXU1AOE3] SimplRom v1[3-6] *Development Stopped*

[hecyel]

Sorry for me is the same.

me too have this problem i want to test this rom but i have bootloop

 

[lrmdaddy]

will this rom work for tmobile,usa, s6 edge??

 

[Chilipincho]

getting bootloop everytime I try to mount a usb using stickmount:

- wiping cache and davlik does not help
- dirty flashing ROM and or kernel does not help
- have to restore nAndroid to get back into bootable state

Don't know if it is a bad usb otg (works fine with my tab s though), flakey drive (again works everywhere else), ROM or kernel related...or just part of janky hardware.

Has anyone successfully used stickmount with this rom/kernel combo yet?

Bang. It's working now. What i've done... Flash " My files. zip " from download directory (bloatware), then install the Stickmount. apk , the phone stuck on bootloop. The only chance to get it back is by turning in to recovery mode, then wipe data/wipe cache/wipe dalvik cache. Stickmount app. disappear but somehow when i mount a USB stick into the phone i can see it in Device Storage as a " USB storage A ". Did trying with onother 2 types of USB sticks with different amount of GB, without any problems. . I hope to help with that.

 

[Psycho_666]

any chance to get smart manager app + smart manager widge from stock rom? tks

+

Looking for that as well

Sent from my SM-G925F

Uploading it to the bloatware folders now
SmartManager.zip is what you'll want :good:

 

[Poser]

Bang. It's working now. What i've done... Flash " My files. zip " from download directory (bloatware), then install the Stickmount. apk , the phone stuck on bootloop. The only chance to get it back is by turning in to recovery mode, then wipe data/wipe cache/wipe dalvik cache. Stickmount app. disappear but somehow when i mount a USB stick into the phone i can see it in Device Storage as a " USB storage A ". Did trying with onother 2 types of USB sticks with different amount of GB, without any problems. . I hope to help with that.

Interesting, so it sounds like Sammy has a proprietary mount solution using MyFiles...

 

[galinha]

How did you flash a G925 F ?
Can you help ?

 

[blow_lk]

Hello
First of all thanks for the great ROM @Psycho_666 and Kernel @mythos234

I have couple of questions maybe you can help me

1. In synapse there were no text of default frequency after installing the ROM(in the start and end of frequency slider), but after flashing "SimplKernel v4.1F" from original thread everything looks fine. This Rom contain different Kernel built?
2. How can I diagnose FC of "S Voice"(as i try to open it via app drawer) and "Nearby Devices"(when I open gallery or video app) ?
3. Is it possible to implement "auto redial" and "vibrate on connect" in this Rom? Previously I owned GalaxyS4(KitKat) and these two function was very helpful for me.
4. I've attached my voltage table. What cons can be of such low voltage? It is already third day I'm these voltages and still have no freezes, but may be there is some other cons that i don't know.

my phone is G925F

 

[mythos234]

Hello
First of all thanks for the great ROM @Psycho_666 and Kernel @mythos234

I have couple of questions maybe you can help me

1. In synapse there were no text of default frequency after installing the ROM(in the start and end of frequency slider), but after flashing "SimplKernel v4.1F" from original thread everything looks fine. This Rom contain different Kernel built?
2. How can I diagnose FC of "S Voice"(as i try to open it via app drawer) and "Nearby Devices"(when I open gallery or video app) ?
3. Is it possible to implement "auto redial" and "vibrate on connect" in this Rom? Previously I owned GalaxyS4(KitKat) and these two function was very helpful for me.
4. I've attached my voltage table. What cons can be of such low voltage? It is already third day I'm these voltages and still have no freezes, but may be there is some other cons that i don't know.

my phone is G925F

1. Not sure what you mean, the Rom has R4.1F inbuilt.
2. Logcat
3. No idea, Psychos sphere
4. If it works for you without freezes..

 

[Psycho_666]

Hello
First of all thanks for the great ROM @Psycho_666 and Kernel @mythos234

I have couple of questions maybe you can help me

1. In synapse there were no text of default frequency after installing the ROM(in the start and end of frequency slider), but after flashing "SimplKernel v4.1F" from original thread everything looks fine. This Rom contain different Kernel built?
2. How can I diagnose FC of "S Voice"(as i try to open it via app drawer) and "Nearby Devices"(when I open gallery or video app) ?
3. Is it possible to implement "auto redial" and "vibrate on connect" in this Rom? Previously I owned GalaxyS4(KitKat) and these two function was very helpful for me.
4. I've attached my voltage table. What cons can be of such low voltage? It is already third day I'm these voltages and still have no freezes, but may be there is some other cons that i don't know.

my phone is G925F

about the FC's, i assume you flashed the S-Voice.zip...if that's so...it could be that it needs more files, but i would need a logcat to be sure.
aLogcat from the playstore works fine, or you can always pull one from ADB if you have that.
Nearby Devices needs the BeamService.zip if i'm not mistaken, so if you flash that it should work fine.
And the Auto Redial and Vibrate on Connect mods...if you have a guide somewhere that would work on Lollipop i can always make it flashable or stock in the rom :good:

 

[blow_lk]

about the FC's, i assume you flashed the S-Voice.zip...if that's so...it could be that it needs more files, but i would need a logcat to be sure.
aLogcat from the playstore works fine, or you can always pull one from ADB if you have that.
Nearby Devices needs the BeamService.zip if i'm not mistaken, so if you flash that it should work fine.
And the Auto Redial and Vibrate on Connect mods...if you have a guide somewhere that would work on Lollipop i can always make it flashable or stock in the rom :good:

Thanks for fast reply.
I've attached logcat. I try to run S Voice twice. After that I opened Gallery apk and also got 2 errors about nearby devices, so I think all errors must be in log.
About auto redial and vibrate on connect i thought it was native samsung features in version previous to s6 & s6Edge that's why I asked you about this.

Sorry for bothering you. You had already done great job.
And thank you again

 

[blow_lk]

1. Not sure what you mean, the Rom has R4.1F inbuilt.
2. Logcat
3. No idea, Psychos sphere
4. If it works for you without freezes..

Thanks for reply,
and THANK YOU VERY MUCH for great Kernel

 

[Docmjldds]

I was thinking more like a TMo variant with their WiFi calling baked in haha! I'm already running it the way you're describing and love it! I work in a hospital and don't have any service at night and am sorta reliant on the WiFi calling :/

You will never see WiFi calling baked into any ROM on the International site. That's been a rule of thumb for eons. So the choice is to run a TMobile ROM with wifi calling ....or an international rom that typically has way more goodies without wifi calling. And glad your loving an International ROM via the audio patch I posted methodolgy in General Section on TMobile a few days back.

 

[Psycho_666]

Thanks for fast reply.
I've attached logcat. I try to run S Voice twice. After that I opened Gallery apk and also got 2 errors about nearby devices, so I think all errors must be in log.
About auto redial and vibrate on connect i thought it was native samsung features in version previous to s6 & s6Edge that's why I asked you about this.

Sorry for bothering you. You had already done great job.
And thank you again

i've looked at the logcat but it doesn't tell me anything, could you try

adb logcat > logcat.txt

that way it shows everything, now i just see the /I (information) lines, and i need to see all the lines, especially /E and /F lines if they're there :good:

i'll see what i can find about the auto redial and vibrate on connect then :good:

 

[blow_lk]

i've looked at the logcat but it doesn't tell me anything, could you try

adb logcat > logcat.txt

that way it shows everything, now i just see the /I (information) lines, and i need to see all the lines, especially /E and /F lines if they're there :good:

i'll see what i can find about the auto redial and vibrate on connect then :good:

Thanks anyway

 

[Psycho_666]

Thanks anyway

Found something:

E/AndroidRuntime( 7355): FATAL EXCEPTION: main
E/AndroidRuntime( 7355): Process: com.samsung.android.allshare.service.mediashare, PID: 7355

so you would need AllShare_PACK.zip from the bloatware folder, and it should work. :fingers-crossed:

 

[blow_lk]

Found something:

E/AndroidRuntime( 7355): FATAL EXCEPTION: main
E/AndroidRuntime( 7355): Process: com.samsung.android.allshare.service.mediashare, PID: 7355

so you would need AllShare_PACK.zip from the bloatware folder, and it should work. :fingers-crossed:

After installing ROM first thing that I do was installing all of bloatware you provided in first post.
As I understand allshare service is needed for nearby devices?
Ok no problem if no solution. I had already disabled svoice. I did not use nearby devices at all, I wrote about it because of annoying message about FC, otherwise no problem. Don't waste your time
If you can somehow find and implement auto redial and vibrate on connect it will be brilliant.

Thanks again :good:

 

[Mzrnzr]

what can we do regarding 'USSD' error.....any fix???

 

[Psycho_666]

what can we do regarding 'USSD' error.....any fix???

what is a USSD error?
like it says in OP...it's a blind build, so i have no idea what you mean.

 

[Repulsa]

what is a USSD error?
like it says in OP...it's a blind build, so i have no idea what you mean.

Hey good job on the rom about the ussd when you type let say on Phone *#00#* something . It gives an error . Anyways keep up the good work

 

[Psycho_666]

Hey good job on the rom about the ussd when you type let say on Phone *#00#* something . It gives an error . Anyways keep up the good work

ow that, that's kinda the service mode.
never knew that had a name
hmm i can fix that up for you with a flashable zip, if it's the same issue as it was on the note 4 for me.
just need to find the right apk for that.
i'll let you know when i find something :good: