• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [GUIDE] HOW TO INSTALL XIAOMI.EU MIUI 12.0.3 (WITH ALL FEATURES OF 12.5) ANDROID 10 ON REDMI 8

Search This thread
Hi, here's my guide on how install Xiaomi.eu MIUI 12.5 (A10) with all features of MIUI 12.5 on Redmi 8

What work
- All functions of the phone

What doesn't work
- Nothing

Note 1: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom, look the official thread of the developer -> https://forum.xda-developers.com/t/redmi-8-miui-12-0-2-0-global-by-papp54.4226501/)

IMPORTANT ADVICE:

I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64


Installation Steps - Rom link HERE


Note 2: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, IF YOU WON'T PROBLEMS START FROM THIS ROM

1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%. All your data will be deleted during the process

2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/

3- Activate début USB in phone settings, then reboot in fastboot and connect the phone to the pc with cable

4- Install on pc minimal adb tool (zip at the bottom), flash the TWRP (.img file at the bottom) recovery typing " fastboot flash recovery ", now drag twrp file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen

5- Scroll on the slider at the bottom of the phone screen to access in the TWRP

6- Go to Wipe -> Format data -> type "yes"

7- Go to Reboot -> Recovery

8- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system

NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE

9- Go to Install -> Select the storage where you have files -> select "xiaomi.eu v12Pro by Papp54.zip" and flash it

10- Wait and then go to Reboot -> System

11- Configure phone and enjoy your new rom ;)

HOW TO ADD AOD MENU IN SETTINGS (IT WORKS FINE):

Flash "AoD_olive_magisk2.zip" in magisk as magisk module, reboot and you will get it.

Note 3: I reccomend you to flash magisk after you have configured the rom to avoid problems

Note 4: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE

- Estatè
 

Attachments

  • Minimal_ADB_Fastboot_v1.4.3.zip
    1,004.8 KB · Views: 72
  • twrp.img
    64 MB · Views: 73
  • Screenshot_2021-06-10-20-16-48-043_com.android.settings.jpg
    Screenshot_2021-06-10-20-16-48-043_com.android.settings.jpg
    162.9 KB · Views: 285
  • Screenshot_2021-06-10-20-17-15-478_com.miui.home.jpg
    Screenshot_2021-06-10-20-17-15-478_com.miui.home.jpg
    245.1 KB · Views: 275
  • Screenshot_2021-06-10-20-15-30-914_com.android.settings.jpg
    Screenshot_2021-06-10-20-15-30-914_com.android.settings.jpg
    126.5 KB · Views: 247
  • Screenshot_2021-06-10-20-15-41-693_com.android.settings.jpg
    Screenshot_2021-06-10-20-15-41-693_com.android.settings.jpg
    114.6 KB · Views: 225
  • Screenshot_2021-06-10-20-16-15-828_com.miui.home.jpg
    Screenshot_2021-06-10-20-16-15-828_com.miui.home.jpg
    121.6 KB · Views: 212
  • Screenshot_2021-06-10-20-16-35-254_com.miui.home.jpg
    Screenshot_2021-06-10-20-16-35-254_com.miui.home.jpg
    71.5 KB · Views: 207
  • Screenshot_2021-06-10-20-18-41-629_com.miui.miwallpaper.jpg
    Screenshot_2021-06-10-20-18-41-629_com.miui.miwallpaper.jpg
    605.5 KB · Views: 204
  • Screenshot_2021-06-10-20-24-23-177_com.android.settings.jpg
    Screenshot_2021-06-10-20-24-23-177_com.android.settings.jpg
    140 KB · Views: 277
  • AoD_olive_magisk2.zip
    23.2 MB · Views: 118
Last edited:

abendigno1991

Member
Apr 8, 2020
28
1
hoping you can add more miui12.5 features like new volume slider and new power menu in next update., your rom is really great devs
 
thanks for the detailed instructions. just one question what settings to use in franco kernel manager?
It boost performances, don't use it for long time because it coul be dangerous for the phone.

Anyway, for better performances for example in games or benchmarks these are steps:
Install the apk, grant root permission, go in CPU, big cluster, select "Maximum CPU frequency" and go in GPU, select "Maximum GPU frequency"

Below there are 2 benchmarks, the highest is done with CPU and GPU boost using this rom

IMG_20210524_181818_927.jpg
IMG_20210524_181640_590.jpg
 

abendigno1991

Member
Apr 8, 2020
28
1
there is a new update on his telegram devs. a rounded icon and system optimisation.,can i flash that rom over the rom that i downloaded in this threads??
 
there is a new update on his telegram devs. a rounded icon and system optimisation.,can i flash that rom over the rom that i downloaded in this threads??
Yes, download in the phone and after go in settings -> Device -> MIUI Version -> click on the 3 points and after on "Select the packet of update" and select the rom you have downloaded for an OTA update. The phone will reboot in twrp and flash the new rom, after the installation reboot system and you will get the update without losing data and apps.
 

abendigno1991

Member
Apr 8, 2020
28
1
Yes, download in the phone and after go in settings -> Device -> MIUI Version -> click on the 3 points and after on "Select the packet of update" and select the rom you have downloaded for an OTA update. The phone will reboot in twrp and flash the new rom, after the installation reboot system and you will get the update without losing data and apps.
thanks devs. i will download it right now .,great.,you are very responsive .,
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Hi, here's my guide on how install Xiaomi.eu MIUI 12.5 (A10) with all features of MIUI 12.5 on Redmi 8

    What work
    - All functions of the phone

    What doesn't work
    - Nothing

    Note 1: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom, look the official thread of the developer -> https://forum.xda-developers.com/t/redmi-8-miui-12-0-2-0-global-by-papp54.4226501/)

    IMPORTANT ADVICE:

    I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64


    Installation Steps - Rom link HERE


    Note 2: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, IF YOU WON'T PROBLEMS START FROM THIS ROM

    1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%. All your data will be deleted during the process

    2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/

    3- Activate début USB in phone settings, then reboot in fastboot and connect the phone to the pc with cable

    4- Install on pc minimal adb tool (zip at the bottom), flash the TWRP (.img file at the bottom) recovery typing " fastboot flash recovery ", now drag twrp file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen

    5- Scroll on the slider at the bottom of the phone screen to access in the TWRP

    6- Go to Wipe -> Format data -> type "yes"

    7- Go to Reboot -> Recovery

    8- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system

    NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE

    9- Go to Install -> Select the storage where you have files -> select "xiaomi.eu v12Pro by Papp54.zip" and flash it

    10- Wait and then go to Reboot -> System

    11- Configure phone and enjoy your new rom ;)

    HOW TO ADD AOD MENU IN SETTINGS (IT WORKS FINE):

    Flash "AoD_olive_magisk2.zip" in magisk as magisk module, reboot and you will get it.

    Note 3: I reccomend you to flash magisk after you have configured the rom to avoid problems

    Note 4: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE

    - Estatè
    1
    These are app themes that you will have after flashing the module
    when i try to install magisk zip file
    the rom gets laggy and cant operate the os., i think the previous miui12.0 .2 is much more stale than this., i hope this will be fix.thanks devs
    1
    Is it save for using custom kernel?
    1
    Can i dirty flash on my phone because i using previous eu rom maintain by papp54 View attachment 5370675
    Yes
    1