[ROM][H910|H918|LS997|US996|VS995|H990*] UNOFFICIAL LineageOS-15.1 for LG V20

[x86cpu]

lineage-15.1-20200303-X86CPU

lineage-15.1-20200303-X86CPU

Latest March security update. This includes the critical February Bluetooth update as well.

 

[Jaysu1]

LGV20 H918 Lineage OS 16.0 ir blaster fixed!

Hey guys I'm a long time Lg v20 h918 user and I tried different ROMs in the past but they were not stable enough for daily use forcing me to use Oreo 8.0 stock rom.
Until recently flashed Lineage OS 16 lineage-16.0-20200409-X86CPU-h918-10p.zip very stable the only complain was my ir blaster didn't work properly the way to fix that all you have to do it's flash gamma kernel and Wala enjoy!

 

[Ascii3]

I decided to finally flash "lineage-15.1-20200506-X86CPU-us996.zip" after previously using stock Oreo on the LG V20 US996.BPT.

What is generally given to work seems to work and what is given to not work does not work.

However, I did notice that while charging works using a standalone charger connected via cable to the LG V20, charging does not work when connecting the LG V20 US996.BPT to a computer via a USB cable, although a charging indicator icon is provided in the status bar. I tried connecting to both USB 2.0 and USB 3.0 controllers and used both USB 3.1 Gen 2 Cabling and USB 2.0 cabling to test. I also tried changing modes from USB charge only to Transfer Mode, but it did not seem to make a difference in ability to charge. Are others also experiencing this no charging when connected via USB to a computer?

 

[MrPolite]

I have this problem too. It never occurred to me the OS was at fault.

I decided to finally flash "lineage-15.1-20200506-X86CPU-us996.zip" after previously using stock Oreo on the LG V20 US996.BPT.

What is generally given to work seems to work and what is given to not work does not work.

However, I did notice that while charging works using a standalone charger connected via cable to the LG V20, charging does not work when connecting the LG V20 US996.BPT to a computer via a USB cable, although a charging indicator icon is provided in the status bar. I tried connecting to both USB 2.0 and USB 3.0 controllers and used both USB 3.1 Gen 2 Cabling and USB 2.0 cabling to test. I also tried changing modes from USB charge only to Transfer Mode, but it did not seem to make a difference in ability to charge. Are others also experiencing this no charging when connected via USB to a computer?

 

[Ascii3]

Thank you MrPolite for your input.

I would also like to note that the discontinued application Current Monitor 1.0.8 is still good to use to check charging details.
Current Monitor 1.0.8 is available for download: https://apkpure.com/current-monitor/com.ericjohnson.currentmonitor

 

[Ascii3]

@x86cpu - For the LG G5 US996, there are two different builds available, one with a trailing "-DS" before the file extension and one without. That is they are of the following form:

lineage-15.1-[DATE]-X86CPU-us996.zip
lineage-15.1-[DATE]-X86CPU-us996-DS.zip​

I could not find an explicit differentiation between the builds documented by you in the thread or the Google Drive distribution, only various and different speculation by others. My best guess was that you have a different build than normal intended for Dirty Santa bootloader users of US996; however, a special build for dual screen support is also plausible.

Please explicitly clarify what are the differences between the builds.
EDIT: After trying a different search criteria than that which I tied in the past for this thread I found a statement from x86cpu:

us996, there is a us996-DS one now (Dirty Santa).

 

[Ascii3]

I decided to finally flash "lineage-15.1-20200506-X86CPU-us996.zip" after previously using stock Oreo on the LG V20 US996.BPT.

What is generally given to work seems to work and what is given to not work does not work.

However...

There was another thing I noticed that I forgot to mention, though it seems that it has been partially mentioned by others in this thread: SD Card (external) is given as corrupt after fresh install via TWRP 3.3.1-1 of "lineage-15.1-20200506-X86CPU-us996.zip" AND coming from stock. The problem does not manifest if not coming from stock (Such as from a wipe and reinstall of the ROM). It appears that the formatted partition is set as write protected. One would think that the ROM would still allow at least reading write-protected partition, but it appears that that is not the case.

To workaround the issue the SD Card data may be backed up and repartioned, then the backed-up contents may be restored. Alternately, the diskpart utility from Windows NT6+ might also be unable to unset the write protection.

I am uncertain whether it matters, but my SD card is partitions an a single exFAT partition; the SD card is a 128 GB card.

There is also an issue working with APKs on external SD card, where they may not always be fully accessible/parse-able by apps excluding Package installer, especially after a move or copy to a different location. The problem appears to manifest for both the LG V20 US996 and RS988 x86cpu LineageOS 15.1 builds.

 

[zeroderp]

as far as i can see
lineage-15.1-20200506-X86CPU-h918-10p.zip
is needed for me to walk stock 8 up to current 18.1
problem is only copy i can find is on gogle drive, and that is NOT working for me at all.
no google downloads work. period.

i am dying for a rom that can let me walk these phones up to our current state of development
someone pleas help

 

[zeroderp]

https://androidfilehost.com/?fid=5862345805528063352 from @Blaises is a bad download. it will not work.

An error occurred during a connection to ava2.androidfilehost.com. SSL received a record that exceeded the maximum permissible length.

Error code: SSL_ERROR_RX_RECORD_TOO_LONG

The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.



i have tried multiple OS, machines, and isp,,same thing with

H91820h.zip | by Dudeawsome for V20

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.

androidfilehost.com

this is from @Dudeawsome

someone pleas show me something i am not seeing so i can get this party started

 

[TripOG]

https://androidfilehost.com/?fid=5862345805528063352 from @Blaises is a bad download. it will not work.

An error occurred during a connection to ava2.androidfilehost.com. SSL received a record that exceeded the maximum permissible length.

Error code: SSL_ERROR_RX_RECORD_TOO_LONG

The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.



i have tried multiple OS, machines, and isp,,same thing with

H91820h.zip | by Dudeawsome for V20

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.

androidfilehost.com

this is from @Dudeawsome

someone pleas show me something i am not seeing so i can get this party started

you need to update from nougat if you want the fingerprint reader to work, you don't need to update to each lineage before flashing 18.1, I went from nougat to 18.1, and it's working fine.

 

[zeroderp]

i am not interested in a fingerprint reader, or a exchange services,

i am just looking for the basic basics

when i load 18, or 17 it get a loading loop that puts me back into TWRP, and no joy

edit: how do i thank some one for thier reply?
i see like quote, reply, and report,,,but no thank you option?

 

[Jesus is God Almighty]

anyone have a link for the latest Gamma kernel and does it work on stock?

 

[TripOG]

anyone have a link for the latest Gamma kernel and does it work on stock?

this is a thread for lineage 15.1