- Status
I did that, several times. But the most I've got was "unrecognized usb device"
Reset your drivers and try again. Same thing happened to me and I think I got all the errors possible while updating from 2003 to 6.5.3
~sent from that thing over there
Absolutely not working, everytime when I bring the hx2410 in Pre-BL Mode it won't be recognized from the computer (USB device not recognized) and so its not possible to upgrade it.
I deleted the ipaq from the device manager and let it be installed again after an hard reset and then switched in the Pre-BL Mode and again the ipaq was not recognized...
Any idea what I can do???
I deleted the ipaq from the device manager and let it be installed again after an hard reset and then switched in the Pre-BL Mode and again the ipaq was not recognized...
Any idea what I can do???
Absolutely not working, everytime when I bring the hx2410 in Pre-BL Mode it won't be recognized from the computer (USB device not recognized) and so its not possible to upgrade it.
I deleted the ipaq from the device manager and let it be installed again after an hard reset and then switched in the Pre-BL Mode and again the ipaq was not recognized...
Any idea what I can do???
I remember that if using Win7 or Vista x64 you need to install custom drivers in order to works. Have you try it?
Yeah, that's correct. I had to manually update the drivers to Spiaatie's included ones in my Win7 32bit, and only then was I able to flash Spiaate's V8 Rom.
Thank you for your aswers.
I have Win7 32bit on my computer so first I installed the drivers from Spiaatie and switched then to Pre-BL Mode. Again the ipaq is recogniced as unknown device - Status: Windows has stopped this device because it has reported problems. (Code 43)
Now I tried to install the drivers from Spiaatie for the unknown device but got the error message "No kompatible driver in this folder"
I also tried several USB-ports but the result is always the same - unknown device...
Annoying...
I have Win7 32bit on my computer so first I installed the drivers from Spiaatie and switched then to Pre-BL Mode. Again the ipaq is recogniced as unknown device - Status: Windows has stopped this device because it has reported problems. (Code 43)
Now I tried to install the drivers from Spiaatie for the unknown device but got the error message "No kompatible driver in this folder"
I also tried several USB-ports but the result is always the same - unknown device...
Annoying...
Hmm, It could help if we have more details, such as the current OS on your device, and whether or not you have WMDC installed and updated to the latest version.
For me, at first I thought it was impossible to update from wm2003 all the way to spiaatie v8, but I still was able to. I hope you can too.
For me, at first I thought it was impossible to update from wm2003 all the way to spiaatie v8, but I still was able to. I hope you can too.
I have an hp iPAQ hx2410 with WM2003, an 32MB MMC Plus and an 512MB CompactFlash.
What I'm trying is to upgrade this Pocket PC on my Win7 32bit PC to WM5 and then to WM6.5.
But thats not possible because of the problems I posted until now.
Whats new is that I tried to update the BIOS of the Pocket PC with the Updatefile directly from the hp homepage. This was also not working because the installation aborted with an DLL write error (couldnt be installed because its not the right one for the iPAQ...)
Is it possible to copy an install file directly on the iPAQ and then switch to Pre-BL and the installation of this file starts? Because now I also have an VM6 *.daa file here. Maybe its possible to install this one...
Thank you for any help!
What I'm trying is to upgrade this Pocket PC on my Win7 32bit PC to WM5 and then to WM6.5.
But thats not possible because of the problems I posted until now.
Whats new is that I tried to update the BIOS of the Pocket PC with the Updatefile directly from the hp homepage. This was also not working because the installation aborted with an DLL write error (couldnt be installed because its not the right one for the iPAQ...)
Is it possible to copy an install file directly on the iPAQ and then switch to Pre-BL and the installation of this file starts? Because now I also have an VM6 *.daa file here. Maybe its possible to install this one...
Thank you for any help!
Ah, so you do have wm2003 on your iPAQ. Try this: kill WMDC before you run the WM5 (remember it has to be the 1.00.00L version) upgrade. To kill WMDC, right-click your taskbar, then start Task Manager, go to processes and kill the wmdc.exe one. Then the HP updater should work, then from that point on you can enter pre-bootloader mode.
Also not working
I killed the wmdc.exe but it was not possible to update with the hp BIOS-Updatefiles or WM5-file. Same error like usual - iPAQ not recognized when in Pre-BL Mode.
Maybe I should try on an other PC with an other Operating System? Win XP? Win 2000?
I killed the wmdc.exe but it was not possible to update with the hp BIOS-Updatefiles or WM5-file. Same error like usual - iPAQ not recognized when in Pre-BL Mode.
Maybe I should try on an other PC with an other Operating System? Win XP? Win 2000?
Hmm. Did you try to run Spiaatie's ROM update? Try that after closing WMDC.
But I think Spiaatie's driver needed to be installed first before anything, but I know for a fact that Windows 7 will not detect a WM2003 device at all.
It's a long shot, but see if you can manually add Spiaatie's driver to your device manager. You should be able to list all devices in Device Manager, or you may need to "Add New Hardware".
The reason why I was able to upgrade from wm2003 was because I had Spiaatie's drivers installed already. That is the most important part. So if you cannot add that driver, then you may need to use anoher computer with either Windows XP or Windows2000.
But I think Spiaatie's driver needed to be installed first before anything, but I know for a fact that Windows 7 will not detect a WM2003 device at all.
It's a long shot, but see if you can manually add Spiaatie's driver to your device manager. You should be able to list all devices in Device Manager, or you may need to "Add New Hardware".
The reason why I was able to upgrade from wm2003 was because I had Spiaatie's drivers installed already. That is the most important part. So if you cannot add that driver, then you may need to use anoher computer with either Windows XP or Windows2000.
Updated correctly but the device hangs up at boot screen and the bar is just maybe at 10%. The screen light goes off, any thoughts?
It behaved this way also before the update.
Thanks.
And also with Win2000 the same error like usual - iPAQ not recognized when in Pre-BL Mode.
I installed the PocketPC with Spiaaties drivers but again in Pre-BL Mode the iPAQ won't be recognized. I tried to install the drivers but it won't work - error during installation.
ANY idea why this hp iPAQ hx2410 with WM2003 won't be recognized in Win2000 and Win7-PCs when in Pre-BL Mode?
I installed the PocketPC with Spiaaties drivers but again in Pre-BL Mode the iPAQ won't be recognized. I tried to install the drivers but it won't work - error during installation.
ANY idea why this hp iPAQ hx2410 with WM2003 won't be recognized in Win2000 and Win7-PCs when in Pre-BL Mode?
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
15News about iPAQ ROM development you can find on Spiaatie's Blog
ROMs for iPAQ devices are available on Spiaatie's ROMs
Description:
- Carefully read all first 3 posts!
- ROM Update Works with Windows - 2000 / XP / Vista / 7
- How to update ROM? Just read README file inside update folder!
- After update make a hard reset!
- Please don't mirror my files anywere else!
- hx2110(5) and hx2410(5) users MUST update ROM in following sequence:
* 1.00.00L -> 1.00.00H -> 1.02.00H -> WM 6.x
3
Always use iPAQ in Pre-BL mode to do the update!
Contacts + iTask + Reset (with stylus)
Release when Pre-BL appers on screen or if You see just white screen
Push Calendar button to get connection with PC
Always HARD-RESET iPAQ after update!
Calendar + Messaging + Power + Reset (with stylus)
Release when Formatting PS.. appers on screen
How to know model number?
It's under battery.
1No Spiaatie , e only press reset button , i will instal it now.
You NEED to make hard-reset after ROM update - it's a MUST!
Many apps will not work until you will make hard-reset.
