• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] I747UCUFNE4_AT&T 4.4.2 Stock ROM & System Dump

Search This thread

enewman17

Senior Member
Sep 20, 2010
3,672
8,717
Fort Wayne, IN
I747UCUFNE4_AT&T 4.4.2

This project is abandoned by the developer

This is a completely stock rom, nothing has been removed.
Only changes include.
  • Root
  • Busybox
  • Permissions for ext. sdcard added for all apps.

Prerequisites include a minimum of a 4.3 bootloader and modem.
If you are not on the official 4.4.2 bootloaders and modem then you will need to flash ktoonsez kernel. http://forum.xda-developers.com/showthread.php?t=1756776

Directions:
1. Factory data reset
2. Flash ROM
3. If your still on 4.3 bootloader flash ktoonsez kernel immediately after the rom.
4. Let phone boot up, go through start up etc...
5. Open SuperSU, Let it disable Knox. If it gets stuck, press the home button and reboot the phone and try it again. It will work the 2nd time.
6. Nothing else to see here.


Flash in custom recovery.

Stock DeOdex
https://www.androidfilehost.com/?fid=95916177934549032

Stock Kernel, insecure, init.d, sdcard R/W, selinux permissive
http://www.mediafire.com/?oooglrsrna0vony

I747UCUFNE4 debrick.img
http://www.androidfilehost.com/?fid=23501681358549813

PHP:
I747UCUFNE4_4.4.2 system dump
Zip contains: system.img, boot.img and NON-HLOS.bin
Not flashable.
http://www.androidfilehost.com/?fid=23501681358549356
By all means you are all welcome to use the entirety of this and everything I upload without permission. Enjoy!
 
Last edited:

rogersb11

Senior Member
Nov 18, 2013
3,345
6,888
Indianapolis
You have the cache.img? I made a zip yesterday for a tar and can zip this up to but wanted to check on the cache if you had it

I'm pulling it now to create the flashable zip but i don't have an s3 anymore so I'll need someone else to test it
 
Last edited:

enewman17

Senior Member
Sep 20, 2010
3,672
8,717
Fort Wayne, IN
The above.

I put together a flashable for the NE6 rogers update, but they stuck CSC files and other things into the cache.img that I had to extract and add to the rom

Same thing happened to me on the canadian note 2 so I haven't even started this yet without it even tho it's sitting here waiting lol

Well.... I'm not sure how I can get the cache image. There is no cache.img or anything in the OTA. The only thing I could do is make an image from my phone after a data reset??? Maybe. This is one of the reasons why we were never able to make a 4.3 tar because of the missing images. Eventually someone found leaked files.

The Rom is complete as far as the system image goes. It's also rooted. So anyone can at least make a rom with the boot and system images.
 
  • Like
Reactions: rogersb11

CNexus

Senior Member
May 17, 2012
9,009
13,994
~/android
Well.... I'm not sure how I can get the cache image. There is no cache.img or anything in the OTA. The only thing I could do is make an image from my phone after a data reset??? Maybe. This is one of the reasons why we were never able to make a 4.3 tar because of the missing images. Eventually someone found leaked files.

The Rom is complete as far as the system image goes. It's also rooted. So anyone can at least make a rom with the boot and system images.

Check cache/recovery and see if there is a zip file there...if there is, just upload the zip itself
 

rogersb11

Senior Member
Nov 18, 2013
3,345
6,888
Indianapolis
Well.... I'm not sure how I can get the cache image. There is no cache.img or anything in the OTA. The only thing I could do is make an image from my phone after a data reset??? Maybe. This is one of the reasons why we were never able to make a 4.3 tar because of the missing images. Eventually someone found leaked files.

The Rom is complete as far as the system image goes. It's also rooted. So anyone can at least make a rom with the boot and system images.

Ok, well I'm at m pc now so I'll deodex and and zip it up shortly and upload

is the bin file a MUST?

---------- Post added at 03:31 PM ---------- Previous post was at 03:16 PM ----------

I'm downloading the Rogers black version from sammobile right now so i can make a different zip if need be and I'll have the cache.img. Well at least I expect it some come with it
 
Last edited:

CNexus

Senior Member
May 17, 2012
9,009
13,994
~/android
Ok, well I'm at m pc now so I'll deodex and and zip it up shortly and upload

is the bin file a MUST?

---------- Post added at 03:31 PM ---------- Previous post was at 03:16 PM ----------

I'm downloading the Rogers black version from sammobile right now so i can make a different zip if need be and I'll have the cache.img. Well at least I expect it some come with it
http://forum.xda-developers.com/showthread.php?p=53528582

Already has the CSC files and everything
 

rogersb11

Senior Member
Nov 18, 2013
3,345
6,888
Indianapolis
Ok, well I'm at m pc now so I'll deodex and and zip it up shortly and upload

is the bin file a MUST?

---------- Post added at 03:31 PM ---------- Previous post was at 03:16 PM ----------

I'm downloading the Rogers black version from sammobile right now so i can make a different zip if need be and I'll have the cache.img. Well at least I expect it some come with it


Beat me to it haha but thanks man. Been looking to dev a TW rom and now I can stop archi after deodex and save some time. Running apps build so kitchen was moving SLOW anyway. Thanks again man. As I no longer hav the phone and doing this for community and my buddy do I need to do anything to kernel for AT&T 747?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 49
    I747UCUFNE4_AT&T 4.4.2

    This project is abandoned by the developer

    This is a completely stock rom, nothing has been removed.
    Only changes include.
    • Root
    • Busybox
    • Permissions for ext. sdcard added for all apps.

    Prerequisites include a minimum of a 4.3 bootloader and modem.
    If you are not on the official 4.4.2 bootloaders and modem then you will need to flash ktoonsez kernel. http://forum.xda-developers.com/showthread.php?t=1756776

    Directions:
    1. Factory data reset
    2. Flash ROM
    3. If your still on 4.3 bootloader flash ktoonsez kernel immediately after the rom.
    4. Let phone boot up, go through start up etc...
    5. Open SuperSU, Let it disable Knox. If it gets stuck, press the home button and reboot the phone and try it again. It will work the 2nd time.
    6. Nothing else to see here.


    Flash in custom recovery.

    Stock DeOdex
    https://www.androidfilehost.com/?fid=95916177934549032

    Stock Kernel, insecure, init.d, sdcard R/W, selinux permissive
    http://www.mediafire.com/?oooglrsrna0vony

    I747UCUFNE4 debrick.img
    http://www.androidfilehost.com/?fid=23501681358549813

    PHP:
    I747UCUFNE4_4.4.2 system dump
    Zip contains: system.img, boot.img and NON-HLOS.bin
    Not flashable.
    http://www.androidfilehost.com/?fid=23501681358549356
    By all means you are all welcome to use the entirety of this and everything I upload without permission. Enjoy!
    9
    this ROM completely broke my phone. doesn't turn on in any way shape or form. 0/10 do not recommend.

    Sent from my XT1028 using XDA Free mobile app

    I dont understand ppl. U guys know what u r getting into when u root ur phone. And every dev says I take no responsibility if u brick. These guys put a ton of time into these roms. They also have jobs and families. Enewman17 and talkingmonkeys r probably still awake from yesterdays mess trying to fix it. I haven't jumped to the ne4 yet but I will soon and for that I say thank u. All of this goes for u to doc thank u:confused:
    6
    Heres the deal folks. Stay on your 4.3 bootloader and modem you're on running this. Don't update with an ota or anything. No new modem or any of that. Not sure how it works with the stock kernel because I wasn't taking the chance with it not being insecure. So long as you're on mj2 or mjb with the mjb modem this will work. Or the i747m equivalents or NE6 should work too. I747 or i747m also because I used kt747 kernel and not stock which leaves some without wifi.

    Also need to add that those of you already on either of the new updates can use this too.

    Service and wifi work fine off mj2 bootloader and mjb modem for me. And heres my debloated 615 mb build with 4 way reboot native and a few build.prop and feature tweaks. Should tide you over until later today. Don't flash a stock kernel, bootloader or modem until we let you all know its safe.

    I need to fix the symlinks in the updaterscript tonight too. To install make sure system isn't mounted before you flash. Someone else has said unmount cache too.

    Debloated DL (615 mb): http://www.androidfilehost.com/?fid=23501681358549689

    MD5: a32a89309cf5ef449e1377120eaf59f9
    6
    Hey guys, I may have missed it while playing catch up, but if not, this will help those who have bricked and need the 4.4.2 KK debrick.img.

    Someone who has FULLY updated to the new build NE4 needs to flash the linked file via custom recovery. This will create a new debrick.img on your sdcard that you can then upload to help rescue the dead devices here. If the new debrick.img has already been found, disregard this.

    T999_Partial_Sys_Dump_for_Debrick.zip

    I know it says T999 in the file name, but it should work for the I747 just the same.

    Hope it helps!
    6
    Samsung-sgh-i747_i747ucufne4 dump

    This is my personal DUMP of SAMSUNG-SGH-I747_I747UCUFNE4
    Included is:

    aboot.mbn
    boot.img
    modem.bin
    recovery.img
    rpm.mbn
    sbl1.mbn
    sbl2.mbn
    sbl3.mbn
    system.img.ext4
    tz.mbn

    All packed in an Odin Restore TAR.

    LINK: DOWNLOAD
    MD5: 058604FA65CA746DA2DADBBE61FBA975
    Just an alternative. MODs please delete if its out of place!

    LJ