[ROM][JB][Sense 5][05.06] Team Venom presents: ViperS 5.3.0 | Sense 6 Blinkfeed |

radhx

Senior Member
Aug 4, 2012
70
6
0
Virar, MH.
Hi,

I usually don't use screen lock, but because recently I installed "Adb Secure" app which requires screen lock, i activated screen lock with a PIN.

But now, on an incoming call, the screen goes blank and my device simply restarts.

I suspected "Adb Secure" to be the culprit and so uninstalled it leaving the screen lock on. But still same issue persisted.

If I deactivate screen lock (irrespective of whether "Adb Secure" app is installed), the issue gets solved. Incoming calls get through without any issues when screen lock is off.

Has anybody encountered similar issues regarding screen lock?

Thanks & Regards.
 

odnamra87

Senior Member
Nov 2, 2013
119
7
0
Remove horizontal quick setting

Hi all,
can you help me to show how to remove horizontal quick setting without removing the vertical quick setting?
 

tomn222

Senior Member
Oct 1, 2011
121
14
0
Hi all,
can you help me to show how to remove horizontal quick setting without removing the vertical quick setting?
If I understood well what you mean. You have to open notification area and tap&hold on upper black part, where you have time, date and settings button :) Do it twice to remove quick settings completely.
 
  • Like
Reactions: odnamra87

Balikesirli

Senior Member
May 5, 2011
468
127
0
29
Dortmund
Hi,

I usually don't use screen lock, but because recently I installed "Adb Secure" app which requires screen lock, i activated screen lock with a PIN.

But now, on an incoming call, the screen goes blank and my device simply restarts.

I suspected "Adb Secure" to be the culprit and so uninstalled it leaving the screen lock on. But still same issue persisted.

If I deactivate screen lock (irrespective of whether "Adb Secure" app is installed), the issue gets solved. Incoming calls get through without any issues when screen lock is off.

Has anybody encountered similar issues regarding screen lock?

Thanks & Regards.
Hey,

It must be a fault from you or your phone..
My father's Sensation with pin lock is working fine!
Incoming calls, notifications etc all is working fine with pin lock
Until now he doesn't have any freeze or restart.
All is working fine

Please, make nandroid backup and try after fullwipe if you have same problem with pin lock. But I can say to 100 percent issue solved :)

Gesendet von meinem ViperOne, ViperS oder ViperDHD mit Tapatalk Pro
 
  • Like
Reactions: radhx

12reza12

Senior Member
Apr 28, 2012
1,277
955
0
rasht
have you done anything with wifi?
no !! what is your mean ?! :\
i flash rom again and i still have this problem
i flash boot.img but problem dosent solved !!
it is happend last night !!
if it solved with flashing kernel
give me that please and tell me how can i flash it !
thanx
 
Last edited:

rzr86

Senior Member
May 21, 2012
8,109
2,455
258
35
Nafpaktos
no !! what is your mean ?! :\
i flash rom again and i still have this problem
i flash boot.img but problem dosent solved !!
it is happend last night !!
if it solved with flashing kernel
give me that please and tell me how can i flash it !
thanx
i think your problem is with the back cover
make sure that the pins which are responsible for wifi make good contact
lift them up gently
 

marko.samiric

Member
Jan 13, 2008
30
13
0
Split
I got this problem too, but fix doesn't work on my Sensation ;[
Use a script in /system/etc/init.d/ and don't forget to make that script executable chmod 0755 <script_name>

Code:
#!/system/bin/sh
echo 0x5053093d 0x30e093d > /sys/devices/virtual/optical_sensors/proximity/ps_kadc
DHD Proximity Recalibrator works if you install the first one from the list of attached files and enable write permission for ps_kadc through init.d script.

Code:
#!/system/bin/sh
chmod 0666 /sys/devices/virtual/optical_sensors/proximity/ps_kadc

Code:
I/DHD Proximity Recalibrator(11063): saving values: 9 61
I/DHD Proximity Recalibrator(11063): Calibration: applying: 9 61
I/DHD Proximity Recalibrator(11063): Writing to ps_kadc: 0x5053093d 0x30e093d
[MOD] [CM10] Proximity Sensor Fix
Code:
echo 0x<param1> 0x<param2> > /sys/devices/virtual/optical_sensors/proximity/ps_kadc
 

vinit91

Senior Member
Feb 16, 2012
187
22
0
pune
I reverted to 5.1.0 and solved with buildprop editor the update thing. I can confirm that with this version my device is smoother and battery lasts longer...don't know why, probably it's the new blinkfeed...???

Even I feel the same that 5.1.0 has a better battery life than 5.2.1 . Is it true guys?
 

Sherlocks

Senior Member
Feb 19, 2012
606
469
0
Seoul
how are you?
here is sensor fix.

pls report for me.
test list
1. proximity sensort when calling
2. autobrightness when you're in outdoors
3. when calling plug in headset without mic, can caller listen your voice


don't worry to cause error or fc for your phone

:laugh:
 
Last edited: