Goal:
Create a stock ROM with a completely stock system to be customized however the user wants and include developer tools. I run this on my device and wanted to share with any who want.
Requirements:
Root access and NAND unlock is required to load this ROM. If you already have these two things, skip this section!
The best methods to accomplish this:
Root Access and Custom Recovery
Load revolutionary - this will permanently NAND unlock S-OFF and allow a custom recovery to be loaded along with root access. Revolutionary documentation.
Latest Radio Thread
Technical Details:
This ROM gives you the original stock system as a complete template allowing the user full control over customization.
This ROM incorporates the latest software version 2.08.651.2 with some developer applications (root, busybox, eng RUU /xbin tools, flash_image and remount).
Other ROMs require manual deletion of the dalvik cache. This ROM clears dalvik cache automatically.
Developer apps included in /system/xbin: busybox, flash_image, remount shortcut script, and ENG RUU binaries.
Latest Stock Kernel included.
Directions:
Load this ROM onto the root of the sdcard.
Different methods to load the ROM:adb push, mounting sdcard to host computer, downloading directly through the browser on the EVO or through Koush's ROM Manager (available in the Market).
Boot into recovery. A custom recovery with NAND unlocked (for write access) is REQUIRED.
Wipe of /data (referred to as wipe of data/factory reset) is recommended! If you'd prefer not to and feel adventurous, there is a script which can help port 3rd party apps and settings when switching between ROMs, fix_permissions.sh (also included in CWM recovery and on the Market). For more info - Cyanogen's Wiki.
From the custom recovery of your choice, Select Install/Apply .zip and select this ROM .zip file.
Confirm the flash and it print out the details as it loads. The Stock ROM is large. Will take a few minutes to load
Select reboot.
The initial boot when the standard Sprint 4G boot animation appears, will take much longer to load because the davlik cache has been cleared. Give it a few minutes. Once the dalvik-cache has been built, all further boots will be much quicker.
To make sure the ROM was applied successfully, check for root access by using the su command and the prompt should show # instead of $ and Software Version number: 2.08.651.2.
Download:
joeykrim.com - jk-original-1.2.0-odex-signed.zip
3b97d10536052773ec39a5ddf04cad87 jk-original-1.2.0-odex-signed.zip
joeykrim.com - jk-original-1.2.0-odex.zip
41dc570266c8cebf07c5c16655bfc076 jk-original-1.2.0-odex.zip
Mirror - thanks DrMac and Snipa
goo-inside.me - jk-original-1.2.0-odex-signed.zip
goo-inside.me - jk-original-1.2.0-odex.zip
Mirror - thanks MobGod
evo3dev.com - jk-original-1.2.0-odex-signed.zip
evo3dev.com - jk-original-1.2.0-odex.zip
Change Log:
1.2.0 - August 21st 2011
1.0.1 - August 16th 2011
1.0 - August 16th 2011
Please provide any feedback or suggestions. This is my first EVO 3D ROM and it will only get better with your help and support!
Superuser.apk
If you want the superuser.apk, [APP] Superuser 2.3.6.1 - Now on the Market [2010-09-05]
Help/Support:
To show my appreciate for reading through the whole first post, or at least skimming, I'm usually on IRC and willing to help.
irc.freenode.net - #sdx-developers and #HTC-EVO-3D
Custom Application Removal:
A web site which allow individual applications to be selected for removal. It produces an update.zip file to automate the process of backup and removal!
[Beta ROM Builder] Create Custom Application Backup-Removal Update.zip - xda-developers
To Do List:
Deodex version
Appreciate all the help and support! Open to feedback. Please post your questions, concerns, issues and experiences. Thanks!!
Create a stock ROM with a completely stock system to be customized however the user wants and include developer tools. I run this on my device and wanted to share with any who want.
Requirements:
Root access and NAND unlock is required to load this ROM. If you already have these two things, skip this section!
The best methods to accomplish this:
Root Access and Custom Recovery
Load revolutionary - this will permanently NAND unlock S-OFF and allow a custom recovery to be loaded along with root access. Revolutionary documentation.
Latest Radio Thread
Technical Details:
This ROM gives you the original stock system as a complete template allowing the user full control over customization.
This ROM incorporates the latest software version 2.08.651.2 with some developer applications (root, busybox, eng RUU /xbin tools, flash_image and remount).
Other ROMs require manual deletion of the dalvik cache. This ROM clears dalvik cache automatically.
Developer apps included in /system/xbin: busybox, flash_image, remount shortcut script, and ENG RUU binaries.
Latest Stock Kernel included.
Directions:
Load this ROM onto the root of the sdcard.
Different methods to load the ROM:adb push, mounting sdcard to host computer, downloading directly through the browser on the EVO or through Koush's ROM Manager (available in the Market).
Boot into recovery. A custom recovery with NAND unlocked (for write access) is REQUIRED.
Wipe of /data (referred to as wipe of data/factory reset) is recommended! If you'd prefer not to and feel adventurous, there is a script which can help port 3rd party apps and settings when switching between ROMs, fix_permissions.sh (also included in CWM recovery and on the Market). For more info - Cyanogen's Wiki.
From the custom recovery of your choice, Select Install/Apply .zip and select this ROM .zip file.
Confirm the flash and it print out the details as it loads. The Stock ROM is large. Will take a few minutes to load
Select reboot.
The initial boot when the standard Sprint 4G boot animation appears, will take much longer to load because the davlik cache has been cleared. Give it a few minutes. Once the dalvik-cache has been built, all further boots will be much quicker.
To make sure the ROM was applied successfully, check for root access by using the su command and the prompt should show # instead of $ and Software Version number: 2.08.651.2.
Download:
joeykrim.com - jk-original-1.2.0-odex-signed.zip
3b97d10536052773ec39a5ddf04cad87 jk-original-1.2.0-odex-signed.zip
joeykrim.com - jk-original-1.2.0-odex.zip
41dc570266c8cebf07c5c16655bfc076 jk-original-1.2.0-odex.zip
Mirror - thanks DrMac and Snipa
goo-inside.me - jk-original-1.2.0-odex-signed.zip
goo-inside.me - jk-original-1.2.0-odex.zip
Mirror - thanks MobGod
evo3dev.com - jk-original-1.2.0-odex-signed.zip
evo3dev.com - jk-original-1.2.0-odex.zip
Change Log:
1.2.0 - August 21st 2011
- Based on the 2.08.651.2 RUU
- Stripped cryptography signature from boot kernel to support custom kernels (thanks Zanzdroid!)
1.0.1 - August 16th 2011
- Repacked ramdisk in stock kernel
- Updated output in updater-script file
1.0 - August 16th 2011
- Used RUU_Shooter_S_Sprint_WWE_1.13.651.7_Radio_0.97.10.0530_NV_NV_SPCS_1.16_release_198109_signed.exe as system software and kernel base.
- Added ENG arm compiled developer tools to xbin
Please provide any feedback or suggestions. This is my first EVO 3D ROM and it will only get better with your help and support!
Superuser.apk
If you want the superuser.apk, [APP] Superuser 2.3.6.1 - Now on the Market [2010-09-05]
Help/Support:
To show my appreciate for reading through the whole first post, or at least skimming, I'm usually on IRC and willing to help.
irc.freenode.net - #sdx-developers and #HTC-EVO-3D
Custom Application Removal:
A web site which allow individual applications to be selected for removal. It produces an update.zip file to automate the process of backup and removal!
[Beta ROM Builder] Create Custom Application Backup-Removal Update.zip - xda-developers
To Do List:
Deodex version
Appreciate all the help and support! Open to feedback. Please post your questions, concerns, issues and experiences. Thanks!!
Last edited:
