• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [KERNEL] [4.4.4] [EXT4/F2FS] LiquidSmooth v3.2 Official [NIGHTLIES]

Search This thread

CPA Poke

Senior Member
Oct 23, 2012
1,515
3,334
Tulsa, OK
1239713_366484996816582_1457113416_n.jpg

DISCLAMER

Your warranty is now void.

I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

NOTE: In order to keep this thread as smooth as possible, please visit this Q&A thread first and ask there. Thanks to LuigiBull23 for starting the thread and helping to maintain it!

601553_366830026782079_883283262_n.png

LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.

Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!

While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.

We ask that you do your part to know your device and know how to recover from problems before you flash!


579668_366829910115424_1484000558_n.png



Liquid0624

Deadman96385

jsnweitzel

Somber73

TheBr0ken

Cdub50

CPA-Poke

602019_366829913448757_1521733509_n.png

Code:
Linaro 4.7 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
MultiWindow
OmniSwitch
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...

Code:
[B][I]PoKernel v2.5 Features[/I][/B]
CM base
SaberMod 4.7 Optimized Linaro Toolchain
Added governors:
   - Intelliactive (thanks to @faux123)
   - AbyssPlug
   - Adaptive
   - Nightmare
   - SmartassH3
   - Wheatley
   - Asswax
   - DanceDance
   - Badass
Added I/O schedulers:
   - BFQ
   - FIFO
   - SIO
   - ZEN
   - VR
   - Tripndroid
Fast-charge
CPU UC
Voltage Control
FRandom support
Dynamic fsync
Linux 3.4.93


1235191_366829916782090_1063865078_n.png

Code:
[url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]

[B]NOTE: All changelogs can now be found in the About Phone section of the ROM's settings. I'll try to post a small log each time I post a new build, but right now I can't promise anything vast every time with my schedule. Or you can just check our GitHub :) [/B]
[B][I]ROM Changelog 4-16-14:[/I][/B]
See "About Phone" in Settings for detailed commit history (changelog)

[B][I]S4-Specifics:[/I][/B]
- Pulsing LED during bootup

[B][I]PoKernel v1.7:[/I][/B]
- Added preliminary F2FS support for whenever we get a custom recovery option to wipe/mount :)
- Linux 3.4.87
- Ramdisk: increased read_ahead_kb from 512 to 1024
- Added LZA compression (smaller boot.img)
- Tripndroid I/O scheduler added
- SLIMBUS overclocking (should theoretically improve audio quality)
- Optimize slub and disable gentle fair sleepers

[B][I]ROM Changelog 4-6-14:[/I][/B]
- Chamber of secrets added ("Liquid Dungeon")
- On-the-Go mode added
- Fast Charge Tile added (may need tweaking..we will see)
- Audio themes from Omnirom added
- Shutdown speed increased from CM/Slim
- Upstream changes

[B][U][COLOR="Red"]NOTE: Clean flash is required when coming from builds before 4/6![/COLOR][/U][/B]

[B][I]PoKernel v1.5 Changelog:[/I][/B]
- Linux 3.4.86
- Voltage control finally added for real! 
- OnDemand governor tweaks/optimizations
- sched/fair optimizations
- Remove dmesg spamming
- Optimize Kernel Samepage Merging (KSM)
- Improve I/O boost
- Dynamic fsync added
- Samsung's new thermal control
- Deadline I/O scheduler optimizations

[B][I]ROM Changelog 3/25/14:[/I][/B]
- REMOVED CHAMELEON ENGINE (this was on an earlier build, but I just now am getting to the Changelog)
- Frameworks: do not kill favorite recent apps
- Removed useless/buggy VoiceDialer from the build. (use Google Now)
- SaberMod Linaro 4.9 updates (ROM)
- Mms: Add option for waking up the screen when a new SMS/MMS is received and, while I'm at it, let's enable/disable
- Mms: Disable Android 4.2 specific hack regarding keyboard behavior (CM)
- MediaProvider: allow write access to external SD
- Changed version of PoKernel that comes stock with ROM to non-OC. *flash the separate kernel [URL="http://www.drdevs.com/devs/teamliquid/Kernels/jflte/PoKernel-v1.3-jflte-03-25-14-signed.zip"]HERE [/URL]for OC*

[B][I]PoKernel Changelog 3-25-14:[/I][/B]
- Bump kernel version to v1.3
- New optimized SaberMod Linaro 4.7 toolchain to make it silky-smooth
- Add asswax, badass, and dancedance governors 
- Add some IO Schedulers
- Remove a butt load of debug
- Optimized ARM RWSEM algorithm
- Upstream changes from CM

[B][I]ROM Changelog 3-20-14:[/I][/B]
- Support BatteryMeterView and Traffic for Chameleon
- Make OmniSwitch default recents UI, with SlimRecents UI as an option
- Get rid of AOSB recents UI
- jflte: Change default GPU governor to simple
- Add Chameleon Theme Engine to Build
- Make the Recent Switchers be in the advanced category
- Fix up the position and names of the recent switchers
- Fix Slim Recents FC

[B][I]PoKernel Changelog 3-20-14:[/I][/B]
- Enable CPU UC
- Updated Linux 3.4.0 to 3.4.83

[B][I]Changelog 3-18-14:[/I][/B]
- Get rid of more of that JB blue
- ActiveDisplay bugfixes
- add "Turn Wi-Fi off" action to the "open networks available" notification
- SystemUI: Set Status bar opaque during drawer pulldown on tablets only
- Don't let apps disable the SIM PIN entry screen.
- SystemUI: Notification Reminder - Update Reminder
- Frameworks: More Keyguard Colors
- Frameworks: SlimPie only preload recent on button press down
- Frameworks: add favorite mode
- LiquidOTA: Add Nandroid Option
- Settings: SlimRecents scaling + lefty mode (3/3)
- Fix F/C in TTS settings

[B][I]PoKernel Changelog 3-18-14:[/I][/B]
- Complete rebase
- Bump kernel version
- Add simple GPU governor
- Added dynamic fsync
- CPU OC the right way :)
- frandom: *Added to build
- FauxSound!
- Disabled WiFi Wakelocks
- exFat support (including optimizations from Faux kernel)
- Added CPU governors:
Intelliactive
Abyssplug
Adaptive
Nightmare
SmartassH3
Wheatley
- Added I/O Schedulers:
BFQ
FIFO
- Removed msm governor
- Kernel mode NEON support
- Performance tweaks
- Fastcharge

[B][I]Changelog 3/13/14:[/I][/B]
- [B][U]New custom kernel![/U] I'm thinking POKErnel as the name?[/B]
- Working OTA (Settings -> About Phone -> LiquidSmooth Updates)
- OmniSwitch: added horizontal gravity support
- Improved boot speed
- jflte: restore pre-unification Verizon home operator prop
- Linaro updates

[B][I]Feature List 3-10-14:[/I][/B]
- Port BatteryBar
- Custom scrolling values
- IME animations
- Status Bar Colors
- Recents UI Switcher! (switches between AOSB Recents UI and new SlimRecents)
- Toast Animations
- Allow hiding notification icons
- Notification Reminders
- Add ContentLoadingProgressBar support
- Port SmoothProgressBar: User Custom ProgressBar Setting
- Wakelock Blocker
- Statusbar clock font style option
- Ladies and Gentlemen...LiquidOTA!
- Custom lockscreen wallpaper
- LiquidPapers!
- Replace Performance control with Kernel Tweaker

[I][B]Detailed Changelog 3-10-14:[/B][/I]
- Smooth Spinners: Makes the loading "spinner" animation smoother in non-holo apps
- Smart PullDown to SlimActions
- Notification Reminder New Layout && Fixes
- Recents to SlimActions Shortcuts
- go kitkat + style tweaks and follow googles color sheme
- fix the random fc on pinch
- SlimRecents: go more inline with AOSP and add menu + new googly shortcuts
- make recent multiuser compatible
- keep IME keyboard alive due recent is showing
- Slimrecents: cover bad 3rd party apps behaviour
- slimrecents: allow closing recents in middle of the open animation
- slimrecents: call app details screen correctly
- Turn advanced devices and file sizes on by default
- Recents: Google Recents
- AOSB RecentApp : Add HTC Reflection Effect
- SlimRecents - add TRDS
- Make bootanimation smooth
- changes needed for art with new boot code
- Speed up booting on multicore devices.
- Add native java screen recorder
- MediaRecorder: Add pause interface
- Bluetooth fixes
- Add network stats to status bar Thanks to AOKP and ChaOS
- fix ClockView ActiveDisplay
- Lockscreen blur fixes
- Fix too long ON/OFF strings
- Sensor: Enable the motion accelerometer for screen orientation change
- Add evening time to header
- Re-do contextual notification header images
- Multi-user support for phones
- Live Volume Steps
- SmoothProgressBar: Accelerate and Interpolator
- fix volume panel more button transparency
- Show live wallpapers in the recents view on high-end devices
- add support for translucent volume panel
- Various A/V frameworks fixes and optimizations
- Fix for phones that do not support RIL_REQUEST_DATA_REGISTRATION_STATE
- Virgin Mobile MMS changes. Thanks Blarf.
- JF Kernel: let's override the charging mode only for LPM
- Bionic fixes and optimizations
- Keyboard: make secondary chars better visible at TRDS dark keyboard
- Dialer: Add YellowPages Canada reverse lookup provider
- Dialer: restore full compatibility with theme chooser
- InCall UI: Change the InCall band color to semi-grey match the kitkat UI, thanks to snak3ater for the idea.
- InCall UI: InCall full screen photo
- OmniSwitch upstream fixes/optimizations
- Add suport for dedicated VoIP devices
- ART optimizations and fixes
- Jflte: Update fingerprints and add 2 jflte's
- Make Samsung camera mode optional
- Updated proprietary (Samsung) vendor blobs
- Dalvik fixes and optimizations
- system/audio: Add Dolby subformat

Changelog/Feature Log/Bug List 2-19-14:
[B][I]Bug Fixes:[/I][/B]
The long standing Battery icon Charging animation and the loading icon bugs have been fixed!
ScreenRecording Now Works!

[B][I]New features/Changelog:[/I][/B]
Smooth Progress Bar
Smooth Progress Bar: Add reset option
Smooth Progress Bar: Accelerate and Interpolator
Wakelock Blocker
New Font size picker (Still broken)
Multi-user support for phones
Live Volume Steps
Fixed Verizon Roaming Icon
Hopefully fixed Left Handed NavBar
Translucent Volume Panel

Changelog 2-12-14:
•SlimPIE! 
•ART runtime should now be functional
•Added capacitive button backlight control
•Tons of framework improvements 
•Various optimizations and fixes

Changelog/Feature List 2-9-14:
•Now using PA Mms as base (unofficial change that won’t be officially supported by the team ATM; so if you have any issues then please discuss within this thread)
•(previous nightly) Added missing ril blobs to get calls working 
•Added support for jfltezm and i9505G (Google Play Edition)
•Remove unused ramdisk files
•OmniSwitch tweaks and cleanup
•(previous nightly) Shorten ROM zip name and start adding date to build names
•Make stock icons more blue
•Fix tethering
•Fix locales
•Bionic optimizations
•Dalvik optimizations
•Add TeloRadio service
•Spanish/German translations added throughout
•Enable Bubble/MultiWindow (either/or, can’t use both at the same time)

935957_366829960115419_953783660_n.png

Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[url="https://github.com/LiquidSmooth/android_kernel_samsung_jf"]PoKernel Source[/URL]
1186140_366829970115418_1836801942_n.png

Code:
[url="http://www.drdevs.com/devs/teamliquid/Nightly/S4_Unified/"]ROM Download[/URL]
[URL="http://www.drdevs.com/devs/teamliquid/Kernels/jflte/"]Latest PoKernel Download[/URL]
[url="http://forum.xda-developers.com/showthread.php?t=2397942"]Pa Gapps Download Thread[/URL]

45971_366829996782082_1342135019_n.png

Screenshot_2014-01-17-22-25-39.png
Screenshot_2014-01-18-20-01-07.png

Screenshot_2014-01-17-22-23-44.png
Screenshot_2014-01-18-20-01-13.png

Screenshot_2014-01-18-20-01-21.png
Screenshot_2014-01-18-20-01-28.png

Screenshot_2014-01-18-20-01-35.png
Screenshot_2014-01-18-20-01-41.png

Screenshot_2014-01-18-20-01-47.png
Screenshot_2014-01-18-20-01-55.png

Screenshot_2014-01-18-20-02-04.png
Screenshot_2014-01-18-20-02-14.png

Screenshot_2014-01-18-20-02-34.png

Please Support Liquid by Donating HERE
 
Last edited:

CPA Poke

Senior Member
Oct 23, 2012
1,515
3,334
Tulsa, OK
The biggest change with this build is that it is compatible with every single variant of the Galaxy S4 (AT&T, TMo, Sprint, Verizon, etc.)[/B]. The way it does this is by executing a script during flash that identifies your bootloader and loki-patches the boot.img (kernel) if you are on one of the locked bootloader variants (AT&T or Verizon) and, for all others, leaves the kernel alone. It also adds any overlays for your device variant (APN's, etc.). Pretty freaking cool. :good:

So SGS4 users (except for i9500, sorry): come one, come all, and flash this Liquidy goodness without worrying about a status 7 error or the dreaded yellow unauthorized triangle.

To re-iterate, YES you read that correctly...it doesn't matter what variant of the S4 you have, you can flash the zip above without using a custom kernel or updater-script edits. :good:
 
Last edited:

CPA Poke

Senior Member
Oct 23, 2012
1,515
3,334
Tulsa, OK
2e9trIl.jpg


Code:
Q - Can I flash this on my (jfltexx/jflteatt/jfltevzw/jfltespr/jfltecan/jfltetmo/jflteusc/jflteworldcom/jflte10-10-220)? 
A - Yep. See post #2.

Q - Can i flash this on my i9500?
A - No, sorry.  

Q - I'm having crazy issues with _____ after flashing the latest nightly. PS: I dirty-flashed. 
A - See the wise words in my signature below.

Q - It wont flash with TWRP, how do i fix it
A - This is an issue with LiquidSmooth. To flash with twrp, follow this method:*
1. Factory reset*
2. Reboot to recovery
3. Flash* 

-OR-

A - Update your recovery to the most recent TWRP.
 
Last edited:

CPA Poke

Senior Member
Oct 23, 2012
1,515
3,334
Tulsa, OK
Got everything all setup and so far everything works great! The mms went right through which is one of the issues I was having previously. Thanks for getting this for us. We really appreciate you!

Glad to hear...data/Mms were working on my phone (ATT), so I was hoping it would be for the other variants as well but I had no way of knowing.
 
  • Like
Reactions: btvolta

Buddyjohn

Senior Member
May 15, 2013
153
49
Regina
I have never been a big fan of liquid before, but this seems promising. to be honest the whole eliminating the need to have separate variant roms built for each variant is really ingenious! that is the whole reason I am flashing this on my canadian variant, and yes it did boot. I am definitely going to give this a legitimate shot. :)
 

btvolta

Senior Member
Nov 26, 2012
3,347
2,273
Tampa Bay
OnePlus 7 Pro
Motorola Edge (2021)
Glad to hear...data/Mms were working on my phone (ATT), so I was hoping it would be for the other variants as well but I had no way of knowing.

Thanks bud. Hey, I just noticed that the setting in developer options aren't sticking. I changed the animation settings to .25 plus root access, but when you go out, and come back in, the settings aren't there, the settings circle is blank.
 

CPA Poke

Senior Member
Oct 23, 2012
1,515
3,334
Tulsa, OK
Thanks bud. Hey, I just noticed that the setting in developer options aren't sticking. I changed the animation settings to .25 plus root access, but when you go out, and come back in, the settings aren't there, the settings circle is blank.

Change those in Settings > Interface > Animation Controls.

And the root access thing is arbitrary, it doesn't do anything.
 
  • Like
Reactions: PapaMag and btvolta

JRW 28

Senior Member
Aug 19, 2011
1,065
663
FL
The phone issue is still there. Just tried several attempts and get the same results, can't hang up when person doesn't answer or checking voicemail. Phone doesn't ring when someone calls. All from a clean install!!
Great Rom and has all the features I'm looking for just need a working phone!
 
  • Like
Reactions: störte

10cheesecakes

Senior Member
Nov 14, 2011
222
9
The back button and list button (the two buttons to the left and right of the hard home button at the bottom) dont work. I cannot go back a screen and have to press the home button to exit. Plus the android keyboard keeps force closing and just will not work. Other then that it works great. Only ROM so far that doesn't drop my network on screen close.

PS - why do I drop network when screen goes off on the other ROMS 0_0... it;'s annoying and I haven't found any fixes or solutions for it.
 

störte

Senior Member
Jun 18, 2012
3,191
1,392
Kiel
The phone issue is still there. Just tried several attempts and get the same results, can't hang up when person doesn't answer or checking voicemail. Phone doesn't ring when someone calls. All from a clean install!!
Great Rom and has all the features I'm looking for just need a working phone!

Same for me on i9505
 

CPA Poke

Senior Member
Oct 23, 2012
1,515
3,334
Tulsa, OK
The phone issue is still there. Just tried several attempts and get the same results, can't hang up when person doesn't answer or checking voicemail. Phone doesn't ring when someone calls. All from a clean install!!
Great Rom and has all the features I'm looking for just need a working phone!







Same for me on i9505

Can you guys post logcats of when you're making the phone calls?
 

btvolta

Senior Member
Nov 26, 2012
3,347
2,273
Tampa Bay
OnePlus 7 Pro
Motorola Edge (2021)
Same for me on i9505

+1.

---------- Post added at 04:51 PM ---------- Previous post was at 04:51 PM ----------

The phone issue is still there. Just tried several attempts and get the same results, can't hang up when person doesn't answer or checking voicemail. Phone doesn't ring when someone calls. All from a clean install!!
Great Rom and has all the features I'm looking for just need a working phone!

+1. It actually says hanging up in the top right corner, but doesn't.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 84
    1239713_366484996816582_1457113416_n.jpg

    DISCLAMER

    Your warranty is now void.

    I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

    NOTE: In order to keep this thread as smooth as possible, please visit this Q&A thread first and ask there. Thanks to LuigiBull23 for starting the thread and helping to maintain it!

    601553_366830026782079_883283262_n.png

    LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.

    Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!

    While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.

    We ask that you do your part to know your device and know how to recover from problems before you flash!


    579668_366829910115424_1484000558_n.png



    Liquid0624

    Deadman96385

    jsnweitzel

    Somber73

    TheBr0ken

    Cdub50

    CPA-Poke

    602019_366829913448757_1521733509_n.png

    Code:
    Linaro 4.7 GCC Toolchain
    O3 Strict-Aliasing & ISO C++11 Mode
    ARM Optimized String Handling Routines
    Linaro and Code Aurora Optimaztions
    Slims DPI on the fly
    Custom animation controls
    TRDS 3.0 (Liquid Blackout in settings)
    Active Display
    Slims QuickSettings
    Halo (Renamed to bubble in settings)
    MultiWindow
    OmniSwitch
    Ram Bar
    T-Mobile Theme Engine
    Privacy Guard
    Built in SuperUser
    Working wifi Tethering
    Cell Broadcasts
    Slims Configurable Power Menu
    Slims Configurable Nav Bar
    Gamma Configuration support
    Custom animation controls (Listview)
    LockScreen Notifications
    And way more than this...

    Code:
    [B][I]PoKernel v2.5 Features[/I][/B]
    CM base
    SaberMod 4.7 Optimized Linaro Toolchain
    Added governors:
       - Intelliactive (thanks to @faux123)
       - AbyssPlug
       - Adaptive
       - Nightmare
       - SmartassH3
       - Wheatley
       - Asswax
       - DanceDance
       - Badass
    Added I/O schedulers:
       - BFQ
       - FIFO
       - SIO
       - ZEN
       - VR
       - Tripndroid
    Fast-charge
    CPU UC
    Voltage Control
    FRandom support
    Dynamic fsync
    Linux 3.4.93


    1235191_366829916782090_1063865078_n.png

    Code:
    [url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]
    
    [B]NOTE: All changelogs can now be found in the About Phone section of the ROM's settings. I'll try to post a small log each time I post a new build, but right now I can't promise anything vast every time with my schedule. Or you can just check our GitHub :) [/B]
    [B][I]ROM Changelog 4-16-14:[/I][/B]
    See "About Phone" in Settings for detailed commit history (changelog)
    
    [B][I]S4-Specifics:[/I][/B]
    - Pulsing LED during bootup
    
    [B][I]PoKernel v1.7:[/I][/B]
    - Added preliminary F2FS support for whenever we get a custom recovery option to wipe/mount :)
    - Linux 3.4.87
    - Ramdisk: increased read_ahead_kb from 512 to 1024
    - Added LZA compression (smaller boot.img)
    - Tripndroid I/O scheduler added
    - SLIMBUS overclocking (should theoretically improve audio quality)
    - Optimize slub and disable gentle fair sleepers
    
    [B][I]ROM Changelog 4-6-14:[/I][/B]
    - Chamber of secrets added ("Liquid Dungeon")
    - On-the-Go mode added
    - Fast Charge Tile added (may need tweaking..we will see)
    - Audio themes from Omnirom added
    - Shutdown speed increased from CM/Slim
    - Upstream changes
    
    [B][U][COLOR="Red"]NOTE: Clean flash is required when coming from builds before 4/6![/COLOR][/U][/B]
    
    [B][I]PoKernel v1.5 Changelog:[/I][/B]
    - Linux 3.4.86
    - Voltage control finally added for real! 
    - OnDemand governor tweaks/optimizations
    - sched/fair optimizations
    - Remove dmesg spamming
    - Optimize Kernel Samepage Merging (KSM)
    - Improve I/O boost
    - Dynamic fsync added
    - Samsung's new thermal control
    - Deadline I/O scheduler optimizations
    
    [B][I]ROM Changelog 3/25/14:[/I][/B]
    - REMOVED CHAMELEON ENGINE (this was on an earlier build, but I just now am getting to the Changelog)
    - Frameworks: do not kill favorite recent apps
    - Removed useless/buggy VoiceDialer from the build. (use Google Now)
    - SaberMod Linaro 4.9 updates (ROM)
    - Mms: Add option for waking up the screen when a new SMS/MMS is received and, while I'm at it, let's enable/disable
    - Mms: Disable Android 4.2 specific hack regarding keyboard behavior (CM)
    - MediaProvider: allow write access to external SD
    - Changed version of PoKernel that comes stock with ROM to non-OC. *flash the separate kernel [URL="http://www.drdevs.com/devs/teamliquid/Kernels/jflte/PoKernel-v1.3-jflte-03-25-14-signed.zip"]HERE [/URL]for OC*
    
    [B][I]PoKernel Changelog 3-25-14:[/I][/B]
    - Bump kernel version to v1.3
    - New optimized SaberMod Linaro 4.7 toolchain to make it silky-smooth
    - Add asswax, badass, and dancedance governors 
    - Add some IO Schedulers
    - Remove a butt load of debug
    - Optimized ARM RWSEM algorithm
    - Upstream changes from CM
    
    [B][I]ROM Changelog 3-20-14:[/I][/B]
    - Support BatteryMeterView and Traffic for Chameleon
    - Make OmniSwitch default recents UI, with SlimRecents UI as an option
    - Get rid of AOSB recents UI
    - jflte: Change default GPU governor to simple
    - Add Chameleon Theme Engine to Build
    - Make the Recent Switchers be in the advanced category
    - Fix up the position and names of the recent switchers
    - Fix Slim Recents FC
    
    [B][I]PoKernel Changelog 3-20-14:[/I][/B]
    - Enable CPU UC
    - Updated Linux 3.4.0 to 3.4.83
    
    [B][I]Changelog 3-18-14:[/I][/B]
    - Get rid of more of that JB blue
    - ActiveDisplay bugfixes
    - add "Turn Wi-Fi off" action to the "open networks available" notification
    - SystemUI: Set Status bar opaque during drawer pulldown on tablets only
    - Don't let apps disable the SIM PIN entry screen.
    - SystemUI: Notification Reminder - Update Reminder
    - Frameworks: More Keyguard Colors
    - Frameworks: SlimPie only preload recent on button press down
    - Frameworks: add favorite mode
    - LiquidOTA: Add Nandroid Option
    - Settings: SlimRecents scaling + lefty mode (3/3)
    - Fix F/C in TTS settings
    
    [B][I]PoKernel Changelog 3-18-14:[/I][/B]
    - Complete rebase
    - Bump kernel version
    - Add simple GPU governor
    - Added dynamic fsync
    - CPU OC the right way :)
    - frandom: *Added to build
    - FauxSound!
    - Disabled WiFi Wakelocks
    - exFat support (including optimizations from Faux kernel)
    - Added CPU governors:
    Intelliactive
    Abyssplug
    Adaptive
    Nightmare
    SmartassH3
    Wheatley
    - Added I/O Schedulers:
    BFQ
    FIFO
    - Removed msm governor
    - Kernel mode NEON support
    - Performance tweaks
    - Fastcharge
    
    [B][I]Changelog 3/13/14:[/I][/B]
    - [B][U]New custom kernel![/U] I'm thinking POKErnel as the name?[/B]
    - Working OTA (Settings -> About Phone -> LiquidSmooth Updates)
    - OmniSwitch: added horizontal gravity support
    - Improved boot speed
    - jflte: restore pre-unification Verizon home operator prop
    - Linaro updates
    
    [B][I]Feature List 3-10-14:[/I][/B]
    - Port BatteryBar
    - Custom scrolling values
    - IME animations
    - Status Bar Colors
    - Recents UI Switcher! (switches between AOSB Recents UI and new SlimRecents)
    - Toast Animations
    - Allow hiding notification icons
    - Notification Reminders
    - Add ContentLoadingProgressBar support
    - Port SmoothProgressBar: User Custom ProgressBar Setting
    - Wakelock Blocker
    - Statusbar clock font style option
    - Ladies and Gentlemen...LiquidOTA!
    - Custom lockscreen wallpaper
    - LiquidPapers!
    - Replace Performance control with Kernel Tweaker
    
    [I][B]Detailed Changelog 3-10-14:[/B][/I]
    - Smooth Spinners: Makes the loading "spinner" animation smoother in non-holo apps
    - Smart PullDown to SlimActions
    - Notification Reminder New Layout && Fixes
    - Recents to SlimActions Shortcuts
    - go kitkat + style tweaks and follow googles color sheme
    - fix the random fc on pinch
    - SlimRecents: go more inline with AOSP and add menu + new googly shortcuts
    - make recent multiuser compatible
    - keep IME keyboard alive due recent is showing
    - Slimrecents: cover bad 3rd party apps behaviour
    - slimrecents: allow closing recents in middle of the open animation
    - slimrecents: call app details screen correctly
    - Turn advanced devices and file sizes on by default
    - Recents: Google Recents
    - AOSB RecentApp : Add HTC Reflection Effect
    - SlimRecents - add TRDS
    - Make bootanimation smooth
    - changes needed for art with new boot code
    - Speed up booting on multicore devices.
    - Add native java screen recorder
    - MediaRecorder: Add pause interface
    - Bluetooth fixes
    - Add network stats to status bar Thanks to AOKP and ChaOS
    - fix ClockView ActiveDisplay
    - Lockscreen blur fixes
    - Fix too long ON/OFF strings
    - Sensor: Enable the motion accelerometer for screen orientation change
    - Add evening time to header
    - Re-do contextual notification header images
    - Multi-user support for phones
    - Live Volume Steps
    - SmoothProgressBar: Accelerate and Interpolator
    - fix volume panel more button transparency
    - Show live wallpapers in the recents view on high-end devices
    - add support for translucent volume panel
    - Various A/V frameworks fixes and optimizations
    - Fix for phones that do not support RIL_REQUEST_DATA_REGISTRATION_STATE
    - Virgin Mobile MMS changes. Thanks Blarf.
    - JF Kernel: let's override the charging mode only for LPM
    - Bionic fixes and optimizations
    - Keyboard: make secondary chars better visible at TRDS dark keyboard
    - Dialer: Add YellowPages Canada reverse lookup provider
    - Dialer: restore full compatibility with theme chooser
    - InCall UI: Change the InCall band color to semi-grey match the kitkat UI, thanks to snak3ater for the idea.
    - InCall UI: InCall full screen photo
    - OmniSwitch upstream fixes/optimizations
    - Add suport for dedicated VoIP devices
    - ART optimizations and fixes
    - Jflte: Update fingerprints and add 2 jflte's
    - Make Samsung camera mode optional
    - Updated proprietary (Samsung) vendor blobs
    - Dalvik fixes and optimizations
    - system/audio: Add Dolby subformat
    
    Changelog/Feature Log/Bug List 2-19-14:
    [B][I]Bug Fixes:[/I][/B]
    The long standing Battery icon Charging animation and the loading icon bugs have been fixed!
    ScreenRecording Now Works!
    
    [B][I]New features/Changelog:[/I][/B]
    Smooth Progress Bar
    Smooth Progress Bar: Add reset option
    Smooth Progress Bar: Accelerate and Interpolator
    Wakelock Blocker
    New Font size picker (Still broken)
    Multi-user support for phones
    Live Volume Steps
    Fixed Verizon Roaming Icon
    Hopefully fixed Left Handed NavBar
    Translucent Volume Panel
    
    Changelog 2-12-14:
    •SlimPIE! 
    •ART runtime should now be functional
    •Added capacitive button backlight control
    •Tons of framework improvements 
    •Various optimizations and fixes
    
    Changelog/Feature List 2-9-14:
    •Now using PA Mms as base (unofficial change that won’t be officially supported by the team ATM; so if you have any issues then please discuss within this thread)
    •(previous nightly) Added missing ril blobs to get calls working 
    •Added support for jfltezm and i9505G (Google Play Edition)
    •Remove unused ramdisk files
    •OmniSwitch tweaks and cleanup
    •(previous nightly) Shorten ROM zip name and start adding date to build names
    •Make stock icons more blue
    •Fix tethering
    •Fix locales
    •Bionic optimizations
    •Dalvik optimizations
    •Add TeloRadio service
    •Spanish/German translations added throughout
    •Enable Bubble/MultiWindow (either/or, can’t use both at the same time)

    935957_366829960115419_953783660_n.png

    Code:
    [url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
    [url="https://github.com/LiquidSmooth/android_kernel_samsung_jf"]PoKernel Source[/URL]
    1186140_366829970115418_1836801942_n.png

    Code:
    [url="http://www.drdevs.com/devs/teamliquid/Nightly/S4_Unified/"]ROM Download[/URL]
    [URL="http://www.drdevs.com/devs/teamliquid/Kernels/jflte/"]Latest PoKernel Download[/URL]
    [url="http://forum.xda-developers.com/showthread.php?t=2397942"]Pa Gapps Download Thread[/URL]

    45971_366829996782082_1342135019_n.png

    Screenshot_2014-01-17-22-25-39.png
    Screenshot_2014-01-18-20-01-07.png

    Screenshot_2014-01-17-22-23-44.png
    Screenshot_2014-01-18-20-01-13.png

    Screenshot_2014-01-18-20-01-21.png
    Screenshot_2014-01-18-20-01-28.png

    Screenshot_2014-01-18-20-01-35.png
    Screenshot_2014-01-18-20-01-41.png

    Screenshot_2014-01-18-20-01-47.png
    Screenshot_2014-01-18-20-01-55.png

    Screenshot_2014-01-18-20-02-04.png
    Screenshot_2014-01-18-20-02-14.png

    Screenshot_2014-01-18-20-02-34.png

    Please Support Liquid by Donating HERE
    31
    The biggest change with this build is that it is compatible with every single variant of the Galaxy S4 (AT&T, TMo, Sprint, Verizon, etc.)[/B]. The way it does this is by executing a script during flash that identifies your bootloader and loki-patches the boot.img (kernel) if you are on one of the locked bootloader variants (AT&T or Verizon) and, for all others, leaves the kernel alone. It also adds any overlays for your device variant (APN's, etc.). Pretty freaking cool. :good:

    So SGS4 users (except for i9500, sorry): come one, come all, and flash this Liquidy goodness without worrying about a status 7 error or the dreaded yellow unauthorized triangle.

    To re-iterate, YES you read that correctly...it doesn't matter what variant of the S4 you have, you can flash the zip above without using a custom kernel or updater-script edits. :good:
    24
    Just FYI, the last build was the final pre-release nightly...we're finally ready to move this baby to Official Release status!
    23
    Plz! remove auto change color in status bar. Very bad idea for this. when see web in white background and all things auto go to white in status bar. Very bad idea







    If next build still have this very bad Chameleon Engine. I'll never use this rom. Because if come back 03-19 that mean I'll never see update.
    I really love this rom. But when include very bad Chameleon Engine. I really don't like this.







    I know liquid rom very nice. But I really very hate Chameleon Engine. I don't know why add this bad thing. It can't be remove or disable. I'm very disappointed.

    Sorry to disappoint you. However, part of what makes Liquid great for so many people is that we're constantly looking for new features to add to the ROM. Sometimes they work, sometimes they don't. This time, it didn't work. What people forget sometimes is that, when you take part of in these development forums, you're essentially serving as a "tester". These are nightlies after all, so things like this can and will happen. While you never using liquid again would be unfortunate, saying something like that on a free development forum is pretty rude.

    That said, calm down and wait for today's build - we've removed the engine due to its closed-source framework code.
    21
    2e9trIl.jpg


    Code:
    Q - Can I flash this on my (jfltexx/jflteatt/jfltevzw/jfltespr/jfltecan/jfltetmo/jflteusc/jflteworldcom/jflte10-10-220)? 
    A - Yep. See post #2.
    
    Q - Can i flash this on my i9500?
    A - No, sorry.  
    
    Q - I'm having crazy issues with _____ after flashing the latest nightly. PS: I dirty-flashed. 
    A - See the wise words in my signature below.
    
    Q - It wont flash with TWRP, how do i fix it
    A - This is an issue with LiquidSmooth. To flash with twrp, follow this method:*
    1. Factory reset*
    2. Reboot to recovery
    3. Flash* 
    
    -OR-
    
    A - Update your recovery to the most recent TWRP.