[ROM+KERNEL] [8.1] [Official] [OTA] [EAS/HMP] AICP 13.1

Search This thread
If there is no recovery partition then the official TWRP isn't persistent?

Breakin' this down for ya if I can.

The kernel is the boot.img. inside the kernel (boot.img) is the recovery, they now share the same partition in the boot.img. When you flash the TWRP installer, it patches the boot.img, goes in and replaces the recovery that is in said boot.img.

TWRP is persistent once the installer is flashed. On both A/B.
 

Geezerooo

Senior Member
Aug 23, 2016
129
41
Google Pixel 7
Google Pixel 7 Pro
Breakin' this down for ya if I can.

The kernel is the boot.img. inside the kernel (boot.img) is the recovery, they now share the same partition in the boot.img. When you flash the TWRP installer, it patches the boot.img, goes in and replaces the recovery that is in said boot.img.

TWRP is persistent once the installer is flashed. On both A/B.
Now that's helpful. Thank you for giving me the benefit of the doubt and explaining.
 
  • Like
Reactions: MoistPicklez

charlatan01

Senior Member
Jan 10, 2008
976
204
Denver
New build! AICP zip: https://drive.google.com/open?id=1ZZBn6xnyQGlIRpiEUuEwoxfGJ5GHOHBS

Changelog: Since I last made a public release, it'd take too much to list all the changes
Short version: Did black magic to rom and kernel

Your black magic on the ROM now has the app working that was wouldn't launch before... thanks for all your hard work!!!
It seems that my fingerprint scanner isn't working.
I updated by sideloading latest to the non active slot (a in my case), reboot, Reboot and installed Magisk. Trying to setup fingerprint again and it doesn't sense my input. Do I need to fastboot -w any time I flash a new version?
 
Last edited:
  • Like
Reactions: KuranKaname

deepu458

Senior Member
Your black magic on the ROM now has the app working that was wouldn't launch before... thanks for all your hard work!!!
It seems that my fingerprint scanner isn't working.
I updated by sideloading latest to the non active slot (a in my case), reboot, Reboot and installed Magisk. Trying to setup fingerprint again and it doesn't sense my input. Do I need to fastboot -w any time I flash a new version?

by any chance do u have the following setting enabled?
Setttings->aicp extras-> lock screen-> security->Fingerprint Unlock(unlock device with fingerprint after reboot without pin/password/pattern)

The above setting is causing so many issues with fingerprint not being recognized and all like tht. Have it disabled and reboot and see if that fixes ur issue.
 
  • Like
Reactions: charlatan01

KuranKaname

Senior Member
Jun 14, 2015
1,035
1,652
Ploiesti
Did I say new build coming soon? Well, great news. After a lot of work on the P builds squashing every single bug out and improving both performance and battery, I think I finally have something XDA worthy. This thread will be closed and a new one will be opened with all the great stuff. Stay tuned!
 

jrodbrown58

Senior Member
Anyone know why my notifications show up like this where they are cut off? ?
 

Attachments

  • Screenshot_20190318-174824_Nova_Launcher.jpg
    Screenshot_20190318-174824_Nova_Launcher.jpg
    140.2 KB · Views: 313

Top Liked Posts

  • There are no posts matching your filters.
  • 27
    Alright guys, sorry for being away, got a lot of going life irl like school and such plus android P. There haven't been any new builds cuz I worked hard on the P trees. Every tree has been remade, and we now are EAS and have f2fs support. Stay tuned for a build coming soong
    23
    logo_black.png


    AICP
    Android Ice Cold Project

    AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!

    Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
    With the re-brand of CM to LineageOS (LAOS) we are now LAOS based with some tweaks from AOSP.

    If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors/bugs to them!!


    Code:
    #include <std_disclaimer.h>
    
    /*
     * Your warranty is now void.
     *
     * We are not responsible for bricked devices, dead SD cards,
     * thermonuclear war or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
     *
     */

    features.png

    Feature list (rough Overview)


    credits.png


    In the beginning we would like to thank:

    LineageOS & CM (R.I.P.) team
    @Maxwen and the rest of the OmniRom team
    DU team
    SlimRoms team
    Resurrection Remix team
    Community
    ...

    team.png


    @LorD ClockaN
    @zipsnet
    @eyosen
    @semdoc
    @Drgravy
    @Hashbang173
    @SpiritCroc
    @wartomato
    @eboye
    plus the rest of the crazy bunch that we call "team"
    ...

    Telegram group: https://t.me/aicpmata

    donations.png


    We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
    Thank you!!



    downloads.png


    Latest Stable Release Version 13.1

    Download link: http://dwnld.aicp-rom.com
    https://transfer.sh/zU5DF/aicp_mata_o-13.1-UNOFFICIAL-20180607.zip


    Official builds will be deleted from our servers every month due to maintenance services.
    We advise everyone to keep at least the latest or best working build on their device as a backup.
    Maybe copy it to a cloud service or USB too.



    changelog.png


    issues.png


    You tell... :p

    FAQ:
    Before using the ROM:
    Q. Can I have an ETA for the next build?
    A. Yes, just look in the OP to see if your device is built on a nightly or weekly schedule.

    Q. Does this ROM support custom kernels?
    A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!

    Q. Why doesn't this ROM support Xposed?
    A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.

    Q. Alright, but I still want to flash Xposed, so which version do I need to install?
    A. You will need to use the version arm64/arm/whatever for SDK 27.

    Flashing the ROM:
    Q. What do I need to know before flashing?
    A. Check the install instructions in the first post...

    Q. Can the builds be dirty flashed over each other?
    A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.

    Q. How do I dirty flash builds?
    A. Wipe ART/Dalvik cache. Flash the ROM, your preferred root solution and reboot. Or just use the OTA app to preform that task for you.

    Q. How do I flash kernel builds?
    A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
    A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash, and then reboot.

    Using the ROM:
    Q. How do I enable software buttons?
    A. Go to Aicp Extras/Navigation bar, and enable it.

    Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
    A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.

    Q. I keep losing root with Magisk, how do I fix it?
    A. Check this out. If that doesn't work for you, ask for help in this thread, read or ask in the Magisk thread on XDA or just re-flash Magisk!

    Q. I'm having issues with WhatsApp, how do I fix it?
    A. Read this

    Q. Do I need to provide a logcat if I'm reporting a bug?
    A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.

    Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
    A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
    A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.


    instructions.png

    The ROM should contain everything you need to enjoy Android Oreo. You don't need to install any Add-on's, simply download the latest ROM, flash it and go!
    If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.

    It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
    If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
    How to flash:
    (Again: Don't do it if you don't know it!)

    Boot TWRP
    FORMAT data partition
    Sideload the rom in TWRP, the gapps are included in the rom zip

    The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
    The root solution should be flashed together with every OTA update (= ROM Update)



    Currently Supported Root Solutions:

    Magisk stable
    Magisk versions higher than 14.0 doesn't require flash on every dirty flash depending on the device, some devices need you to flash it every time, unless your maintainer says otherwise it should be fine

    KERNEL:
    The kernel that the rom uses is made by me, starting from a fresh ALS base with various additions and improvements.

    If you want to contribute to the AICP or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)

    sources.png


    Kernel source:
    https://github.com/celtare21/android_kernel_essential_msm8998

    ROM & Additional links:
    AICP Gerrit Code Review
    AICP on Github


    AICP G+ community

    ROM OS Version: 8.1.x Oreo
    Kernel: Linux 4.4.136

    Version Information:
    Status: NIGHTLY
    Release Date: 05-07-2018

    You want to see a "normal" night at the "DEV office", click here!!​

    XDA:DevDB Information
    AICP, ROM for the Essential Phone

    Contributors
    KuranKaname
    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 4.x

    Version Information
    Status: Stable

    Created 2018-05-07
    Last Updated 2018-06-16
    16
    Did I say new build coming soon? Well, great news. After a lot of work on the P builds squashing every single bug out and improving both performance and battery, I think I finally have something XDA worthy. This thread will be closed and a new one will be opened with all the great stuff. Stay tuned!
    12
    Here is the rest of the update promised:
    HMP boot.img: https://transfer.sh/WKUsA/HMP.img
    EAS boot.img: https://transfer.sh/mi8wH/EAS.img
    EAS rom: https://transfer.sh/qChUs/aicp_mata_o-13.1-UNOFFICIAL-20180614-EAS.zip
    And tho keep everything in one place, HMP rom: https://drive.google.com/file/d/1O0r2ry-jwKQh31aPLtMvk5s6KhXJQqYS/view
    EAS got updated with some stuff from the new HMP build and new security patches
    11
    Alright guys, sorry for being away. A lot of parties and I was more drunk than sober the past few days. Although, this didn't stop me from making a huge update:
    Completely remade the kernel from scratch, dropped OEM source and now using ALS for a base
    Kernel running in enforcing
    Fixed encryption for everyone
    Plus a lot other things
    Rom: https://transfer.sh/zU5DF/aicp_mata_o-13.1-UNOFFICIAL-20180607.zip
    Kernel: https://transfer.sh/kgEZF/boot.img
    ATTENTION!!!!! Everyone needs to FORMAT the data partition for the new update. Completely changed the encryption type. Sorry for the inconvenience but it was one of the only ways to fix the stupid fc'es.
    If everything behaves good, tomorrow or overmorrow the rom is OFFICIAL! :)