[ROM+KERNEL+TWRP][Ticwatch Pro(Catfish)(Catshark-4G)]+[Ticwatch C2(Skipjack)[9Aug20]

Search This thread

janjan

Recognized Developer
May 20, 2007
3,170
3,414
Aalborg
tweaksyourandroid.weebly.com
-[Ticwatch Pro 4G/LTE (EU) (Catshark)-PWDD.190617.059]-[30-5-2020]
- [Ticwatch Pro 2020 (Catfish-Ext)-PMP2.191203.001]-[22-6-2020]
- [Ticwatch Pro (Catfish)-PWDD.190617.074]-[09-8-2020]
#############################
- [Ticwatch Pro 4G/LTE (USA) (Catshark)-PWDD.190617.032]-[DISCONTINUED]-
-[Ticwatch C2 (Skipjack)-PWDS.190618.001.B4]-[DISCONTINUED]
-[Ticwatch E2 (Tunny)-PWDS.190618.001.B3]-[DISCONTINUED]
#############################



Code:
****Disclaimer****
[COLOR="Red"][B]WARNING:  IMPROPER FLASHING MAY POTENTIALLY BRICK YOUR DEVICE. SO PLEASE PROCEED AT YOUR OWN RISK. ME OR ANY OTHER DEVELOPER MENTIONED IN THIS POST WILL ASSUME NO RESPONSIBILITY FOR THIS. I accepts no responsibility for any damage to your device. Please read the instructions and notes before flashing anything[/B][/COLOR]

IF YOU LIKE MY WORK AND WANT TO BUY ME A COFFEE
DONATE-ME-HERE

###################
REQUIREMENTS
###################

- Ticwatch Pro, Ticwatch Pro 4G, Ticwatch Pro 2020 Ticwatch C2 and Ticwatch E2 ONLY INTERNATIONAL VERSION. It may also work on Chinese version too but I haven't test it personally.
- An unlock bootloader, working driver and working adb/fastboot
- You can download ADB/FASTBOOT from here Download: ADB/FASTBOOT
- Custom recovery TWRP- (Se download section below)

###################
HOW TO FLASH- STEPS
###################

(FOLLOW EITHER THE INSTRUCTIONS FROM MEGA FOLDER OR THE STEPS BELOW)

- Download the latest ROM, latest vendor, latest Magisk and busybox - (Everything are include in the MEGA folder)
- Attach your watch to your PC and enable USB Debugging from settings menu. Ensure adb/fastboot is working. Please Google and see "how to enable debugging from settings menu".
- Extract the vendor folder and go inside the folder (Here you will find vendor.img and twrp.img + other files)
(You have to flash the vendor image and format userdata and cache)
- Boot your watch into fastboot/bootloader mode by applying the following code.
Code:
- adb devices
- adb reboot bootloader
- fastboot flash vendor vendor.img
- fastboot format userdata OR fastboot erase userdata
- fastboot format cache OR fastboot erase cache
- fastboot boot NAME-OF-THE-TWRP.img (Se the name of the twrp.img)

- Now move the ROM, Magisk and busybox to your watch.
- Flash the ROM and reboot. If you prefer root then
- Flash busybox and finally Magisk (IMPORTANT flash ROM, then Busybox and Magisk in this order)

NOTE
- When rebooting your watch, IF a Prompt come up and asking about installing twrp bla.bla then un-mark both lines/ then click on DO Not Install
- Let your device boot up, then connect your watch to your phone and finish the initial setting
- Open Magisk Manager and go to settings and set Automatic Response to Grant, Uncheck updates and Superuser notifications to None
- Reboot and enjoy

###################
ROM AND KERNEL FEATURES-
See latest changelog here
###################

DOWNLOAD
[DECRYPTION KEY]
Code:
iZbWXMs8vabDW1szJz1hgg

OPTIONAL
TO INSTALL KERNEL CONTROL APP WEAR OS

Code:
- Download the KernelAudiutor4Wear.apk from above link and move it to your adb folder.
- adb devices
- adb install KernelAudiutor4Wear.apk

MAGISK/BUSYBOX/APP-KERNEL-CONTROL
DOWNLOAD LATEST MAGISK FROM HERE
DOWNLOAD LATEST BUSYBOX FROM HERE
KERNEL CONTROL APP WEAR OS

###################
BACK TO STOCK ROM
See Mega folder for Stock images
Code:
[[B]DECRYPTION KEY[/B]]
iZbWXMs8vabDW1szJz1hgg
[B][SIZE="4"]STEPS[/SIZE][/B]
- fastboot flash aboot aboot.img
- fastboot flash boot boot.img
- fastboot flash recovery recovery.img
- fastboot flash vendor vendor.img
- fastboot flash system system.img
- fastboot format userdata OR fastboot erase userdata
- fastboot format cache OR fastboot erase cache
- fastboot reboot
##############################
Source/GitHub
##############################

-Source
-Source
-Source

###################
IF YOU LIKE MY WORK AND WANT TO BUY ME A COFFEE
DONATE-ME-HERE
###################

Special thanks to:
If you can, donate and respect all the devs and enjoy :)
@Maxr1998 Big thanks for giving me knowledge and your great work for Asus Zenwatch_3 and your great github guide.
@topjohnwu for his great effort (Magisk)Thank you so much
@SuperR.R for the great kitchen
@YashdSaraf for the busybox (I edit a bit to make it work for Ticwatch-pro)
Sultan Al Sawaf for his patch
Mobvoi, Google and Qualcomm for providing us the kernel source.
Please always support devs and others (soon).
 
Last edited:

janjan

Recognized Developer
May 20, 2007
3,170
3,414
Aalborg
tweaksyourandroid.weebly.com
/*
* Your warranty is now void.
* I am not responsible for bricked devices, bootloop and dead SD cards,
* YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/

Download : TWRP For Catshark 4G/LTE
Source Device Tree: Device Tree For Building TWRP


###############################
###############################


How to get the Gpay back...

1-https://pastebin.com/HKV7cj7H

2-https://forum.xda-developers.com/smartwatch/other-smartwatches/rom-kernel-t3821013/page172

3-https://www.youtube.com/watch?v=UKxGfNxRjo4&t=320s

4-https://forum.xda-developers.com/showpost.php?p=79637148&postcount=1720


Be aware for this in future....19 April 2020

https://mobile.twitter.com/topjohnwu/status/1245956080779198464
 
Last edited:

alucard_24

Senior Member
Oct 14, 2012
579
2,643
IF YOU LIKE MY WORK AND WANT ME TO CONTINUE, THEN BUY ME A SHOT OF WHISKY
DONATE ME HERE
DONATE-ME
Special thanks to:
If you can, donate and respect all the devs and enjoy :)
@Maxr1998 Big thanks for giving me knowledge and your great work for Asus Zenwatch_3 and your great github guide.
@topjohnwu for his great effort (Magisk)Thank you so much
@superR for the great kitchen
Ticwatch and Google for providing kernel source.
Please always support devs and others (soon).[/SIZE][/B]
Contributors
janjan, JANJAN
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x

Version Information
Status: Stable
Stable Release Date: 25/7/2018

Sorry, where do you take the original Kernel and ROM source code? I didn't find them.

Thanks in advance
 

tempter_alex

Member
Jul 26, 2018
6
5
Penza
waiting English rom for China version :D

I wait too, and there are no references, the same the Chinese version.


Where references I burn from impatience

---------- Post added at 12:40 PM ---------- Previous post was at 12:37 PM ----------

Sorry, where do you take the original Kernel and ROM source code? I didn't find them.

Thanks in advance

We wait for the reference while they are absent
 
  • Like
Reactions: vietdh

vietdh

Member
Feb 21, 2008
36
3
Hanoi
ready for up ROM :)
 

Attachments

  • 37932223_10216969624697967_4831469197294829568_n.jpg
    37932223_10216969624697967_4831469197294829568_n.jpg
    43 KB · Views: 9,476

janjan

Recognized Developer
May 20, 2007
3,170
3,414
Aalborg
tweaksyourandroid.weebly.com
Sorry, where do you take the original Kernel and ROM source code? I didn't find them.

Thanks in advance

3.18-oreowear-dr works fine.


I wait too, and there are no references, the same the Chinese version.


Where references I burn from impatience

---------- Post added at 12:40 PM ---------- Previous post was at 12:37 PM ----------



We wait for the reference while they are absent

Uploading soon.


ready for up ROM :)

Hehe need to upload source and fix some issues first. Will be up soon.
 

jinhaihan

Member
Nov 1, 2017
21
5
Thanks for your rom,
and this is the wear os global version? Not the china vwersion?
I want a global version but I have a china version ticwatch pro
 

janjan

Recognized Developer
May 20, 2007
3,170
3,414
Aalborg
tweaksyourandroid.weebly.com
Thanks for your rom,
and this is the wear os global version? Not the china vwersion?
I want a global version but I have a china version ticwatch pro

Yes. Global version..based on stock imsges

Have one of these being delivered soon. Things specific to the device (like dual screens) still will work?

Yes. Everything is working. TWRP, Kernel and ROM. I am going to upload everything today. Working to get the source up and update my GitHub.
 
Last edited:

jinhaihan

Member
Nov 1, 2017
21
5
Yes. Global version..based on stock imsges



Yes. Everything is working. TWRP, Kernel and ROM. I am going to upload everything today. Working to get the source up and update my GitHub.

Hahaha it is perfect!! I will flash it in some days later, and If work fine I will donate
oh , can it get ota update?
 

tempter_alex

Member
Jul 26, 2018
6
5
Penza
Can someone please help me in finding the steps to unlock the bootloader for TicWatch Pro Chinese version.
Enable ADB in the Developer Settings
Once done connect your watch to your computer and do "adb reboot bootloader"
THIS WILL RESET YOUR WATCH:*Once in fastboot mode type "fastboot oem unlock" (if you already have an unlocked bootloader you can skip this)
 
  • Like
Reactions: manishsoni7689

otto_naka

Member
Sep 27, 2017
5
2
I am new to xda.
How do I download twrp and rom?
The links are broken to me.
I have a Ticwatch Pro Chinese version. I would like to flash a international ROM.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Hi janjan! Are you planning to update all these watches to wear 3.0 when it comes out?
    Unfortunately I don't own any Ticwatch anymore. I am thinking to purchase Ticwatch Pro 3 to play with it.
  • 75
    -[Ticwatch Pro 4G/LTE (EU) (Catshark)-PWDD.190617.059]-[30-5-2020]
    - [Ticwatch Pro 2020 (Catfish-Ext)-PMP2.191203.001]-[22-6-2020]
    - [Ticwatch Pro (Catfish)-PWDD.190617.074]-[09-8-2020]
    #############################
    - [Ticwatch Pro 4G/LTE (USA) (Catshark)-PWDD.190617.032]-[DISCONTINUED]-
    -[Ticwatch C2 (Skipjack)-PWDS.190618.001.B4]-[DISCONTINUED]
    -[Ticwatch E2 (Tunny)-PWDS.190618.001.B3]-[DISCONTINUED]
    #############################



    Code:
    ****Disclaimer****
    [COLOR="Red"][B]WARNING:  IMPROPER FLASHING MAY POTENTIALLY BRICK YOUR DEVICE. SO PLEASE PROCEED AT YOUR OWN RISK. ME OR ANY OTHER DEVELOPER MENTIONED IN THIS POST WILL ASSUME NO RESPONSIBILITY FOR THIS. I accepts no responsibility for any damage to your device. Please read the instructions and notes before flashing anything[/B][/COLOR]

    IF YOU LIKE MY WORK AND WANT TO BUY ME A COFFEE
    DONATE-ME-HERE

    ###################
    REQUIREMENTS
    ###################

    - Ticwatch Pro, Ticwatch Pro 4G, Ticwatch Pro 2020 Ticwatch C2 and Ticwatch E2 ONLY INTERNATIONAL VERSION. It may also work on Chinese version too but I haven't test it personally.
    - An unlock bootloader, working driver and working adb/fastboot
    - You can download ADB/FASTBOOT from here Download: ADB/FASTBOOT
    - Custom recovery TWRP- (Se download section below)

    ###################
    HOW TO FLASH- STEPS
    ###################

    (FOLLOW EITHER THE INSTRUCTIONS FROM MEGA FOLDER OR THE STEPS BELOW)

    - Download the latest ROM, latest vendor, latest Magisk and busybox - (Everything are include in the MEGA folder)
    - Attach your watch to your PC and enable USB Debugging from settings menu. Ensure adb/fastboot is working. Please Google and see "how to enable debugging from settings menu".
    - Extract the vendor folder and go inside the folder (Here you will find vendor.img and twrp.img + other files)
    (You have to flash the vendor image and format userdata and cache)
    - Boot your watch into fastboot/bootloader mode by applying the following code.
    Code:
    - adb devices
    - adb reboot bootloader
    - fastboot flash vendor vendor.img
    - fastboot format userdata OR fastboot erase userdata
    - fastboot format cache OR fastboot erase cache
    - fastboot boot NAME-OF-THE-TWRP.img (Se the name of the twrp.img)

    - Now move the ROM, Magisk and busybox to your watch.
    - Flash the ROM and reboot. If you prefer root then
    - Flash busybox and finally Magisk (IMPORTANT flash ROM, then Busybox and Magisk in this order)

    NOTE
    - When rebooting your watch, IF a Prompt come up and asking about installing twrp bla.bla then un-mark both lines/ then click on DO Not Install
    - Let your device boot up, then connect your watch to your phone and finish the initial setting
    - Open Magisk Manager and go to settings and set Automatic Response to Grant, Uncheck updates and Superuser notifications to None
    - Reboot and enjoy

    ###################
    ROM AND KERNEL FEATURES-
    See latest changelog here
    ###################

    DOWNLOAD
    [DECRYPTION KEY]
    Code:
    iZbWXMs8vabDW1szJz1hgg

    OPTIONAL
    TO INSTALL KERNEL CONTROL APP WEAR OS

    Code:
    - Download the KernelAudiutor4Wear.apk from above link and move it to your adb folder.
    - adb devices
    - adb install KernelAudiutor4Wear.apk

    MAGISK/BUSYBOX/APP-KERNEL-CONTROL
    DOWNLOAD LATEST MAGISK FROM HERE
    DOWNLOAD LATEST BUSYBOX FROM HERE
    KERNEL CONTROL APP WEAR OS

    ###################
    BACK TO STOCK ROM
    See Mega folder for Stock images
    Code:
    [[B]DECRYPTION KEY[/B]]
    iZbWXMs8vabDW1szJz1hgg
    [B][SIZE="4"]STEPS[/SIZE][/B]
    - fastboot flash aboot aboot.img
    - fastboot flash boot boot.img
    - fastboot flash recovery recovery.img
    - fastboot flash vendor vendor.img
    - fastboot flash system system.img
    - fastboot format userdata OR fastboot erase userdata
    - fastboot format cache OR fastboot erase cache
    - fastboot reboot
    ##############################
    Source/GitHub
    ##############################

    -Source
    -Source
    -Source

    ###################
    IF YOU LIKE MY WORK AND WANT TO BUY ME A COFFEE
    DONATE-ME-HERE
    ###################

    Special thanks to:
    If you can, donate and respect all the devs and enjoy :)
    @Maxr1998 Big thanks for giving me knowledge and your great work for Asus Zenwatch_3 and your great github guide.
    @topjohnwu for his great effort (Magisk)Thank you so much
    @SuperR.R for the great kitchen
    @YashdSaraf for the busybox (I edit a bit to make it work for Ticwatch-pro)
    Sultan Al Sawaf for his patch
    Mobvoi, Google and Qualcomm for providing us the kernel source.
    Please always support devs and others (soon).
    21
    Performance Tips

    Final Update
    Janjan has already included in the new rom all of these changes. So no need to keep reading this post.

    I'll leave it here in case it helps someone with other type for smartwatch.

    Great job @janjan keep it going.

    ------------------- Original Post -------------------------
    Here are my two cents on performance on this device.

    The Problem
    Like in many android devices one of the main issues ( i learned this with old phones ) is the RAM and Swap.
    While switching apps or opening new ones the following events happen (please remember this is a linux based OS so all of this assumptions are based on Linux experience)

    1. App open request happens
    2. Os checks if app is running if it is is switches to it
    2.a If app is in RAM it loads it from there
    2.b if its not it loads it from the swap to the RAM and then loads it from there (less expensive than reopening the app)
    3. If app is not running it start it (running all the initialization procedures that can be very expensive in some apps) and gets the app to RAM

    Now, if at any point of that process the RAM is full, the OS will dump another app to Swap. If the swap is full the OS will dump another (least used app) completely out of the system stopping it and therefore having to reopen it entirely later on (expensive process).

    Ok. Now that this is clear lets see the Ticwatch.
    The available RAM is less than 512Mb. After the system boots and all the Google services, google play, keyboard services, assistant, etc are loaded we end up with less than 100Mb available. Enough to open two apps. One of them being the launcher, "wearable.app". After this the thing start swapping. Right?.....Wrong!!!

    See, there is no swap on the device. therefore opening any app will force another one out of the system completely stopping it and having to restart it later on (EXPENSIVE for CPU and Battery). This includes the wearable app. Your watchface.
    One of the apps really capable of doing this is Google Play since it just LOVES RAM. It will kick everythinbg out of RAM pretty much, including your watchface. And since it runs background processes (like app updating) the OS will find hard to kick Google Play out of RAM as well.

    I will not post more examples and reasons why Swap is important. But I will post the solution

    The solution
    USE AT YOUR OWN RISK
    Creating a swap file will allow us to extend the maximum amount of available RAM. We are aware that RAM disk is slow, and should be avoided at all cost, but in this case it is quite beneficial. Here is how to enable it

    1. Have the custom ROM installed
    2. Have the latest kernel installed
    3. Have developer options enabled
    4. Have busybox and magisk installed

    Run the following commands on your computer
    adb devices (device should show up there if properly connected)
    adb shell
    su (approve access on device itself)
    fallocate -l 256M /sbin/.magisk/mirror/data/swapfile
    mkswap /sbin/.magisk/mirror/data/swapfile
    swapon /sbin/.magisk/mirror/data/swapfile
    sysctl vm.swappiness=60

    Now, some notes
    1. The 256Mb is a (so far) arbitrary number I came up with. Over monitoring it closely it seems that 256Mb is enough. Change this to your liking. You can check the amount of used swap by running the command top while in adb shell
    2. The selected swappinesss is the default for a desktop computer, it may require tweaking but so far seems ok.
    3. Updating apps with the play store still uses a LOT of CPU, but is way more responsive now and I would recommend updating apps only when you are not going to need the watch or while charging.
    4. Use this alongside kernel auditor and ondemand governor with 4 cores enabled and 1.2Ghz as max cpu frequency.
    5. After reboot swap will be lost and you will have to set it up again. Please note that I did it this way since i'm still testing this.
    6. Your device may have a reduces SD life and could be detrimental if the manufacturer used a low grade chip

    The Result
    Well. Apps NEVER get relaunched.
    1. They never get stopped in the first place in order to make space for other apps
    2. They switch WAY faster since they are either in RAM or in SWAP
    3. First launch of any app is faster since other apps don't need to be stopped first
    4. Finally the TicWatch Pro is a useful device. I no longer think that getting a Google Authenticator code will be faster if i just use my phone.

    I hope this helps you all.
    I'm available to answer your questions on European (i'm awake) times.

    ---------- Post added at 06:57 PM ---------- Previous post was at 06:27 PM ----------

    I recorded a video to show the snappiness of the device now.
    Note about the video. Some apps where previously opened (therefore where on RAM or the new shinny SWAP)
    other apps like the flashlight, weather and Magisk, where not. but you can see that after opening them they reopen (switch back) pretty much instantly.
    During the video the Swap usage was 140Mb.

    Link to video - Please remove spaces since XDA does not allow me to post links XD:
    https ://youtu.be/UVk4JLqC8Do

    One of the main things I realized is that after launching the google assistant (hold main button 1 sec) I can actually relaunch it 100 times after that (including app witching) and still get my response to (turn on the lights in the house, or how is the weather in less than 1 sec)

    This is a must try :)

    ------------------------------------------------------ Update 1 -----------------------------------------------------------

    After testing, using swap seems to affect battery usage on a rate of about 10% drain (depends on your usage).
    The main reason could be the fact that now we are using the storage a lot more, and using the storage means that this chip will consume more power.
    my watch have been running now for 2 days (with 1 battery charge in between) and I had not performance issues. I was able to work with notifications, receive phone calls, use the assistant, google fit, etc.

    ------------------------------------------------------ Update 2 -----------------------------------------------------------
    I realized that after having every app running and not having to boot them again the device battery is actually well improved. I'm doing 36-48h now.
    Also realized that finally the Google assistant is useful. Responsive and helpful
    I reduced the amount of cache to 256Mb and updated the script. Seems to be enough for a custom watchface Google fit, assistant, calendar, weather, hr monitor and Google play to run at the same time.
    Do not try (as I did), to run 1Gb of swap. You will never get to use it and since you need to allocate all the space at once you cannot install more apps. The device will become unresponsive and and connection fails at this point for a reason. Causing weird connection and disconnections

    ------------------------------------------------------ Update 3 -----------------------------------------------------------
    How to make it persistent after reboot
    Here is small script in oder to make the swap permanent
    I did not find a way to use the fstab or the init.rc since none of them seem to be available in Android
    It seems that is available in some devices but not on other. But, since we also need Magisk for the actual swap we can also use it to run the script using the handy service.d folder

    Script (save to a remount_swap.sh file in your pc, you can do this with a text editor, just make sure that you don't accidentally have a .txt at the end)
    #!/system/bin/sh
    sleep 10
    sysctl vm.swappiness=60
    swapon /sbin/.magisk/mirror/data/swapfile

    How to copy the script
    adb push <path_to_your_script>\remount_swap.sh /storage/emulated/0/
    adb shell
    su
    cd /storage/emulated/0/
    mv remount_swap.sh /sbin/.magisk/img/.core/service.d/
    cd /sbin/.magisk/img/.core/service.d/
    chmod +x remount_swap.sh
    adb reboot
    20
    Hello there..
    First of all I am apologize for the delay. I am still experimenting and trying different settings with the new ROM and kernel. So far so good.... Kernel and ROM, both are almost ready, But I am still working with a script in order to create and use zram as a swap space/ virtual memory. It is the best combination of RAM and disk space. It seems it doesn't use the CPU all the time...which means doesn't reduce the battery. I tried different settings of zram and swap and end up with this..balance with CPU usage and battery. It boost the speed and gives more memory and good battery..Almost 3 days of battery..(ofc depends how much u use the watch)

    The scripts is also done now...I am happy with that. I also implement init.d in the ROM in order to use the script automatically. It is also possible to just flash the script in TWRP. I just need to clean up and take sometime to upload the ROM.

    I would also like to thanks those who have donated me. I really appreciate that. Thank you so much for your donation.

    I am also start working with Ticwatch C2 and Ticwatch Pro 4G. New ROM and kernel for both devices are coming too.
    12
    Hi all.
    This is perfect way to get Gpay on your watch. Tested by TicWatch Pro

    Go to https://sqlite.org/download.html and download sqlite-tools-win32-x86-3280000.zip
    Unzip and use sqlite3.exe
    You have to got ADB files

    Let's go

    0. Commands start to execute from cmd, so that adb and sqlite3 was visible from there (put in the desired directory, or run with the full path)
    1. Enable Developer on watch (click on the build number in about watch")
    2. Enable adb debugging
    3. Open cmd On PC (adb folder with adb files)
    4. Execute
    Code:
    adb shell
    You should see an invitation with "$"
    5. Execute
    Code:
    su
    confirm on the clock. If suddenly not confirmed, and left Permission denied, find in Magisk Manager and confirm manually.
    6. Execute
    Code:
    cp /data/data/com.google.android.gms/databases/dg.db /mnt/sdcard
    copy the database to where the file can be easily copied to the PC
    7. Open an additional cmd window (in ADB folder)
    Execute
    Code:
    adb pull /mnt/sdcard/dg.db
    The database will be copied to the PC in the current directory
    8. In the same terminal window run
    Code:
    sqlite3.exe dg.db
    you will be prompted with ">"
    9. Execute
    Code:
    update main set c = 0 where a like 'attest%';
    Change the value of the 3rd column ("c") to 0 if the first ("a") starts with attest
    10. Exit sqlite (press Ctrl-D)
    11. Push the file back on the clock
    Code:
    adb push dg.db /mnt/sdcard
    12. Select the first open window with "adb shell"
    Code:
    cp /mnt/sdcard /data/data/com.google.android.gms/databases/dg.db
    13. Changing access rules
    Code:
    chmod 440 /data/data/com.google.android.gms/databases/dg.db
    Go to Gpay on your watch and add your credit card
    12
    IF YOU LIKE MY WORK AND WANT TO BUY ME A COFFEE
    DONATE-ME-HERE

    Just a heads up to everyone...
    I am testing a new kernel now. So far so good, no freezing and auto deep sleep issue any more. The watch goes to sleep during idle time to save battery/energy-saving (low power states) and wake-up either by pressing the buttons/user-request/or any kind of activity/any drivers request. The kernel is rebased to improve the battery and to fix the laggy/deep sleep issue. I disabled some kernel parameter to speed up the performance overhead- at the cost of battery/ power consumption... BUT I have around 2 days of battery now (44:18:24 Uptime+11% stille left). I will ofc continue my test and investigate the new kernel a bit more.






    IF YOU LIKE MY WORK AND WANT TO BUY ME A COFFEE
    DONATE-ME-HERE