Dear Galaxy Ace 3 LTE users, yesterday succesfully compiled CM11 for our beloved device! Credits go to @szezso for his device tree and @TheWhisp for his cwm 6.0.4.9 recovery that is able to install kit-kat roms 
Screenshots
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
Link to the cwm recovery needed: [url]http://d-h.st/pak[/url]
Code:
Latest Release is [COLOR="Red"]20160820[/COLOR]!
[URL="https://www.androidfilehost.com/?fid=24591000424956016"]Download[/URL]Screenshots
Code:
ENABLE ART(need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
Code:
If you experience problems with wi-fi:
All you have to do is to set country code to your country in Wi-Fi settings
Code:
Releases:
[COLOR="Red"]-20160820-[/COLOR]
*CM sources update
*August security patch level
*Kernel: HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands (CVE-2016-5829)
*Kernel: net: ipc_router: Bind only a client port as control port (CVE-2016-2059)
*Kernel: msm: kgsl: Defer adding the mem entry to a process (CVE-2016-2504)
*Kernel: ashmem: Validate ashmem memory with fops pointer (CVE-2016-5340)
*Kernel: msm: board-8930-pmic: Remove PMIC LED driver
*Kernel: msm: Fix bus vector for DFAB clk setting
[COLOR="Red"]-20160107-[/COLOR]
*CM sources update
*Latest android security patch level(2016-01-01)
[COLOR="Red"]-20151113-[/COLOR]
*CM sources update
*More security patches brought by Cyanogen
[COLOR="Red"]-20151110-[/COLOR]
*CM sources update
*Security patches from Cyanogen
*rootdir: init.target.rc: update sensors from stock ramdisk
*rootdir: Remove read ahead tunings
[COLOR="Red"]-20150824-[/COLOR]
*Include custom Kernel
*Kernel: Re-implemented kexec hardboot
*Kernel: Fixed last_kmsg
[COLOR="Red"]-20150814-[/COLOR]
*CM sources update
*Patches for stagefright vulnerability
*Kernel: Support for kexec hardboot
*Kernel: Add Fiops i/o scheduler
*Kernel: Add smartmax_eps cpu governor
[COLOR="Red"]-20150701-[/COLOR]
*CM sources update
*Fix compass
*Cleanup init.qcom.power.rc for unnecessary stuff
*Update interactive governor values
*Kernel: Misc patches
[COLOR="Red"]-20150501-[/COLOR]
*CM sources update
[COLOR="Red"]-20150424-[/COLOR]
*CM sources update
*Remove hdpi from PRODUCT_AAPT_CONFIG
*Disable cpu.notify_on_migrate feature
*Enable mpdecision by default
*Kernel: Misc patches
[COLOR="Red"]-20150324-[/COLOR]
*CM sources update
*Web security patches applied
*Kernel:Misc patches
[COLOR="Red"]-20150320-[/COLOR]
*CM sources update
*Remove setting permissions for non-existent fmradio dev
*Enable separated headset mic
*Update snd_soc_msm_2x
*Drop NFC support
*Kernel: Avoid some memleaks
*Kernel: Misc patches
[COLOR="Red"]-20150312-[/COLOR]
*CM sources update
*Revert: "Move custom AAPT config to cm.mk"
[COLOR="Red"]-20150308-[/COLOR]
*CM sources update
*msm8930-common: camera: Modify base.common.version API define
*Re-enable QCOM's HW AAC encoder
*Kernel: Fix QCOM's HW AAC encoder
*Revert "rootdir: Create native cgroup"
[COLOR="Red"]-20150305-[/COLOR]
*CM sources update, mostly translations
*Fixed camcorder
[COLOR="Red"]-20150228-[/COLOR]
*Enable QCOM's HW AAC encoder"
*Disable LPA
*Set default country index to Europe in FM app
*Create native cgroup
*Move custom AAPT config to cm.mk
*Kernel: Tune voltage table
*Kernel: Misc patches
[COLOR="Red"]-20150219-[/COLOR]
*CM sources update
*Kernel: Re-add intelliactive cpu governor
*Kernel: Re-add sio i/o scheduler
*Kernel: Probably fixed random reboots
*Kernel: eCryptfs: Remove buggy and unnecessary write in file name decode routine
*Kernel: Νetfilter: conntrack: disable generic tracking for known protocols
[COLOR="Red"]-20150120-[/COLOR]
*CM sources update
*Revert: Remove chmod of /proc/cmdline
*Kernel: Optional overclock up to 1.7GHz
*Kernel: Update intelli_plug to v3.9
*Kernel: Add intellimm cpu governor
*Kernel: Misc patches
*Fix encryption after factory reset
[COLOR="Red"]-20150102-[/COLOR]
*CM sources update
*Disable QCOM's HW AAC encoder
*Disable audio offload
*Update media_profiles
*Fix: Now audio from videos plays on both sides of headphones/speaker
[COLOR="Red"]-20141225-[/COLOR]
*CM sources update
*Don't show mobile plan preference
*Load fastrpc module after boot
*Minor cleanup in init.carrier.rc
*Move wcd9310 symlink creation to msm8930-common
*msm8930-common:Create wcd9310 symlinks during build process
*Enable smooth-streaming video-playback
*Don't mount persdata
*Revert: Enable large heap for Trebuchet
*Minor kernel patches
[COLOR="Red"]-20141205-[/COLOR]
*CM sources update
*Remove qrngd service
*Add SettingsProvider
*Update ueventd.qcom.rc
*Minor cleanup of init.qcom.rc
*Enable large heap for Trebuchet
*Fix hostapd service to use correct config folder
*Remove chmod of /proc/cmdline
*Change NTP_SERVER in gps.conf to use izatcloud
*Set default locale to en_UK
*Remove obsolete option
*msm8930-common:Cut EGL cache size in half
*msm8930-common:Define correct path to hostapd files
*msm8930-common:Some camera wrapper cleanup and changes
*msm8930-common:Disable CCX support in Prima config
*msm8930-common:Remove unused option from camera makefile
*Many kernel patches
[COLOR="Red"]-20141125-[/COLOR]
*CM sources update
*Increase read ahead to 512KB
*Revert: Enable face detection
*Revert: Change ADCBID for PROXY Rx
*Revert: Loganre: Enable proximity wake option
*Disable interactive governors sync_freq feature
*Add back couple of missing lines in media_codecs.xml
*Disable wpa_supplicant log spam
[COLOR="Red"]-20141115-[/COLOR]
*CM Sources update
*Added Binaries for IPv6 tethering
*Fixup input paths
*Removed Fauxsound, it caused calling bug
*Fixed FM Radio
*Updated media codecs
[COLOR="Red"]-20141112-[/COLOR]
*CM Sources update
*Use bottom mic for speaker phone
*Change ACDBID for PROXY Rx
*Enable face detection
*Audio config improvements
*Fixed audio playback
*Wlan: prima: Sync with kk_2.7
*Milestone M12 release
[COLOR="Red"]-20141107-[/COLOR]
*CM sources update
*Ramdisk updates
*GPS config improvements
*GPS HAL improvements
*Move power management to a separate init.qcom.power.rc
*Revert:add VR headset to use case, it was breaking mic on phone calls in my tests
*Official toolchains used
[COLOR="Red"]-20141102-[/COLOR]
*CM sources update
*Kernel: Reduced max OC for both CPU(1.5GHz) and GPU(475MHz) for safety
*fixed "com.qualcomm.timeservice has stopped"
[COLOR="Red"]-20141101-[/COLOR]
*CM sources update
*fstab updates, now you can mount USB-OTG without a 3rd party app (EXT4 filesystem tested)
*re-enabled triple framebuffer
*audio/snd_soc_msm_2x: Add VR headset use case
*Disabled mpdecision service, we have intelliplug
[COLOR="Red"]-20141028-[/COLOR]
*CM Sources Update
*Kernel:Add Fauxsound, thanks @Paul
*Kernel:Squashed update of wifi regulatory database
*Kernel:CPUfreq Updates
*Overlay cleanup
*Add some blobs
*Enabled GPS XTRA servers
*Camera HAL code cleanup
[COLOR="Red"]-20141023-[/COLOR]
*CM Sources Update
*Finally stock camera rotation bug is FIXED!!!, thanks Arne Coucheron, Abhisek Devkota
*Removed AGPS_USE_PSC from GPS HAL again
*Build.prop updates
*Kernel: Add GPU OC up to 627 MHz including stock frequencies this time
*Kernel: Add Intelli_plug hotplug driver as well as msm_hotplug, credits @Faux123
[COLOR="Red"]-20141020-[/COLOR]
*CM Sources Update
*Changed Network buffer sizes from stock
*Kernel: Manage Offline CPUs
*Add USB_OTG back to storage menu
*Add USB-OTG support in kernel (Needs testing, for undesired wakelocks)
*Some kernel update
*Reverted Some GPS HAL changes
[COLOR="Red"]-20141017-[/COLOR]
*CM Sources Update
*Correct cpu voltage table in kernel
*Added Underclock again up to 162 MHz
*Increased Overclock limit up to 1.7 GHz
*Removed USB-OTG from storage menu
*Device tree cleanup/update
[COLOR="Red"]-20141010-[/COLOR]
*CM Sources Update
*Revert: KSM enabled by default
*M11 milestone release
*msm8930-common: camera: Don't forcefully enable ZSL
*Add Overclock: 1.24 GHz, 1.35 GHz, 1.45 GHz
*Added SmartassV2, Intelliactive CPU governors
*Added sio and sioplus I/O governor
[COLOR="Red"]-20141007-[/COLOR]
*CM Sources Update
*Fixed Superuser settings force close
*Fixed Terminal Emulator force close
*Kernel Downgrade to 3.4.0, it should be more stable
*Kernel is built with Linaro 4.7 now
*Update Camera HAL API (arco)
-Features still present in kernel:
*Change readahead to 512kB.
*Voltage Control
*Optimize KSM
*USB Fastcharge
-Features removed from kernel(due to perfomance issues and stability):
*GPU Overclock
*GPU Optimizations
*Graphite Kernel Optimizations
*O3 Kernel Optimizations
*Cortex A15 Optimizations
[COLOR="Red"]-20141005-[/COLOR]
*CM Sources Update
*Kernel Update up to 3.4.103, thanks @F4k
*Remove useless dual sim stuff from ramdisk
*GPU Overclock up to 627 Mhz (Be careful)
*GPU Optimizations
*CPU Voltage Control (Be careful)
*Enable KSM by default
*Many, many Kernel Updates
*Graphite Kernel Optimizations
*-O3 Kernel Optimizations
*Change Kernel readahead to 512KB
*Optimize Kernel SamePage Merging
*Cortex A15 Optimizations
*Kernel compiled with Linaro 4.9.2 now
*Usb Fastcharge support
*More, more and more
[COLOR="Red"]-20141003-[/COLOR]
Changelog:
*CM Sources Update
*Fix in liblights
*Kernel was built with Sabermod 4.7.4 toolchain
*Updated Recovery (CWM 6.0.5.1)
[COLOR="Red"]-20140930-[/COLOR]
Changelog:
*CM Sources Update
*Updated Build Fingerprint From Latest Stock Rom
*Updated fstab
*Add Missing Device Permissions
*Kernel Update
*Overlay Sar Levels(Settings->About Phone->Status->SAR Levels)
[COLOR="Red"]-20140919-[/COLOR]
Changelog:
*CM sources update
*Kernel Updates
*Adreno libs update
[COLOR="Red"]-20140916-[/COLOR]
*CM sources update
*Adjustments to power HAL
*CyanogenMod M10
[COLOR="Red"]-20140913-[/COLOR]
Changelog:
*CM sources update
*Kernel Updates
*Wifi Driver Update
[COLOR="Red"]-20140910-[/COLOR]
Changelog:
*CM sources update
*Update Ramdisk
*Add Support for GT-S7275T
*Allow more background services
*msm8930: Enable triple framebuffer
[COLOR="Red"]-20140904-[/COLOR]
Changelog:
*CM sources update
*Fixed Missing Preferred Network type under Network Settings
*msm8930-common: Merge in some wifi config changes from stock KK
[COLOR="Red"]-20140903-[/COLOR]
Changelog:
*CM sources update
*Some Kernel Update
[COLOR="Red"]-20140901-[/COLOR]
Changelog:
*CM sources update
*Updated GPS config
*Fixed WMA audio files playback(Apollo couldn't play .wma files)
[COLOR="Red"]-20140831-[/COLOR]
Changelog:
*CM sources update
*Massive KitKat Blobs Update from Express 2 and Serrano
*Added missing OMX decoder
*Stability should be increased
*Reworked GPS (arco)
*Add Support for GT-S7275B
[COLOR="Red"]-20140829-[/COLOR]
Changelog:
*CM sources update
*Modified Stock Power Profiles to fit our device(corrected cpu states and more)
[COLOR="Red"]-20140827-[/COLOR]
Changelog:
*CM sources update
[COLOR="Red"]-20140823-[/COLOR]
Changelog:
*CM sources update
*Added Soft Reboot option in Reboot options
[COLOR="Red"]-20140818-[/COLOR]
Changelog:
*CM sources Update
*Fixed mic on loudspeaker while calling again
*CM sources update
[COLOR="Red"]-20140816-[/COLOR]
Changelog:
*CM sources update
[COLOR="Red"]-20140813-[/COLOR]
Changelog:
*New Kernel Config, should improve some things, thanks @arco68
*Removed SmartassV2 governor, reported to use highest frequency all the time
*CM sources update
*Device tree update from @arco68
*Added Blobs from stock ANF2 firmware, thanks @arco68
*Added Google Camera in build, camcorder lag should disappear
*Use stock ANF2 ril blobs, should improve network
*Audio improvements by @arco68
[COLOR="Red"]-20140806-[/COLOR]
Changelog:
*Probably fixed MMs again, need testing and feedback
*CM Sources Update
[COLOR="Red"]-20140801-[/COLOR]
Changelog:
*CM sources update
*Removed USB OTG due to wakelock bug
[COLOR="Red"]-20140724-[/COLOR]
Changelog:
*CM source Updates
*Fixed missing option from storage settings: Unmount SDcard
[COLOR="Red"]-20140721-[/COLOR]
*CM sources update
*Kernel Changes, now camera seems a little more stable to me
[COLOR="Red"]-20140719-[/COLOR]
Changelog:
*Voip Fix
*CM source Updates
*Kernel Sources Update
Add Dock Headset to audio policy
[COLOR="Red"]-20140716-[/COLOR]
Changelog:
*Using custom power HAL (Should improve battery)
*CM sources update
*Audio config improvements and cleanup
Code:
[URL="http://forum.xda-developers.com/showthread.php?t=2397942"]GAPPS[/URL]
Code:
If you like it, give me a thanks :)
Last edited:
