[ROM] Lenovo Z6 Pro L78051 QPST | Edl way |

[achicasar1069]

Please Help Me with this.

I have installed on mine the 11.0.575 and works great , allredy rooted and magisk installed.
Maybe a fresh install will do the trick

can u help me with this? please, im going to love you every day in my life, jaja, i dont know what i need to do first, erease all, erase recovery, erase system, data, chace, first root, etc, i dont know, what version of software you used for get that amazing result?

 

[mburaky06]

can u help me with this? please, im going to love you every day in my life, jaja, i dont know what i need to do first, erease all, erase recovery, erase system, data, chace, first root, etc, i dont know, what version of software you used for get that amazing result?

You can find istructions on this thread

 

[achicasar1069]

But no for do a root and instal magik

 

[x-geo]

hello everybody

What is the best version of the firmware i can download? i have 11.0.284 ST

 

[wlcbtd]

hello everybody

What is the best version of the firmware i can download? i have 11.0.284 ST

For me you already have the best "global" rom , work good, after installing twrp and magisk by yourself. It's the choice i have done for my phone.

But if you use english or chinese, look for the 11.0.575.
Not using it myself but have good return in this thread.

The 11.1.xxx branch seem not good for daily use by now , but maybe someone have other news on it ?

 

[achicasar1069]

I don't know how much I did but I deleted a lot of things with the help of adb fastboot, I changed ROMs and unintentionally o brick my phone.
After so much work I managed to revive my phone with a CN ROM 11.0.575 but my screen freezes when my wifi is active and I had to change the launcher and with that it was fixed, when I turn off my wifi and I wait a few time my phone unfreezes BUT my mobile network
turns off and turns on every minute approximately (I have not solved this). I do not know what else I can do, I like the phone in design, specifications camera, etc. My plan for tonight is erase EVERYTHING again and install something that does not give me these problems, BUT I DON'T KNOW WHAT I NEED TO INSTALL ANF THE SECUENSE OF THIS INSTALATION.

My phone is already unlocked, I don't know how I got it but I didn't even have to go to site "www zui com / iunlock" (so I don't know if I did it right but it already appears as unlocked) I know it because when entering fastboot mode my phone says that it is already unlocked, but I reiterate, I don't know if I did it correctly.

I don't know how but o already have installed TWPR 3.3.1.

PLEASE, HELP ME TO SOLVE MY PROBLEMS ANSWERING THIS QUESTIONS.

1. How i can do a full reset of My phone and install again the stock rom?
2. What version of ROM and QFIL did you recommend? I prefer a Global Version ROM.
3. How i know if My phone is correctly unlocked? I hace this question because in any moment i enter to "www zui com / iunlock" and i dont know if i forced need to enter here for do a correct unlocked, because in fastboot mode my phone says "unlocked"

Please i ask for you colaboration and i promess do the same for all of you.
:crying:

 

[nakarmkir69]

I don't know how much I did but I deleted a lot of things with the help of adb fastboot, I changed ROMs and unintentionally o brick my phone.
After so much work I managed to revive my phone with a CN ROM 11.0.575 but my screen freezes when my wifi is active and I had to change the launcher and with that it was fixed, when I turn off my wifi and I wait a few time my phone unfreezes BUT my mobile network
turns off and turns on every minute approximately (I have not solved this). I do not know what else I can do, I like the phone in design, specifications camera, etc. My plan for tonight is erase EVERYTHING again and install something that does not give me these problems, BUT I DON'T KNOW WHAT I NEED TO INSTALL ANF THE SECUENSE OF THIS INSTALATION.

My phone is already unlocked, I don't know how I got it but I didn't even have to go to site "www zui com / iunlock" (so I don't know if I did it right but it already appears as unlocked) I know it because when entering fastboot mode my phone says that it is already unlocked, but I reiterate, I don't know if I did it correctly.

I don't know how but o already have installed TWPR 3.3.1.

PLEASE, HELP ME TO SOLVE MY PROBLEMS ANSWERING THIS QUESTIONS.

1. How i can do a full reset of My phone and install again the stock rom?
2. What version of ROM and QFIL did you recommend? I prefer a Global Version ROM.
3. How i know if My phone is correctly unlocked? I hace this question because in any moment i enter to "www zui com / iunlock" and i dont know if i forced need to enter here for do a correct unlocked, because in fastboot mode my phone says "unlocked"

Please i ask for you colaboration and i promess do the same for all of you.
:crying:

Here is the how to , it was on page 3 .

QUOTE=Andredanielski;79956619]A very quick guide for the rom install.

1. Download the rom and extract.
2. Download and install adb-setup-1.4.3.exe
3. Download and extract SDK Platform tools for Windows
4. Unlock the bootloader of the Z6 Pro, there is some tutorials on internet
5. Put the rom files in the same folder of the platform tools
6. Start the phone on the fastboot mode - volume down + power and release when the screen appears
7. Connect the usb cable - use the usb type c to usb adaptor that comes with the phone
8. Open CMD with administrator rights and in the folder with all the files type these commands:
fastboot devices (it will show the phone serial number)
00_flash_all.bat (the creator of the rom made a script to flash all the files in sequence)
9. Some files will not be flashed, says that protected partitions is not allowed to flash. No problem.
9. After some time the phone will reboot and voila, global rom.

Hope that helps. Thanks.

PS: For a moment I thought i bricked my phone, it was showing lots of erros in the file transfer. It was my crazy motherboard that do not work well with the usb type c connector, but the normal usb worked. Phew, I was so happy when it worked.[/QUOTE]



This is for the Zaza rom

Please read the forum

 

[achicasar1069]

Here is the how to , it was on page 3 .

QUOTE=Andredanielski;79956619]A very quick guide for the rom install.

1. Download the rom and extract.
2. Download and install adb-setup-1.4.3.exe
3. Download and extract SDK Platform tools for Windows
4. Unlock the bootloader of the Z6 Pro, there is some tutorials on internet
5. Put the rom files in the same folder of the platform tools
6. Start the phone on the fastboot mode - volume down + power and release when the screen appears
7. Connect the usb cable - use the usb type c to usb adaptor that comes with the phone
8. Open CMD with administrator rights and in the folder with all the files type these commands:
fastboot devices (it will show the phone serial number)
00_flash_all.bat (the creator of the rom made a script to flash all the files in sequence)
9. Some files will not be flashed, says that protected partitions is not allowed to flash. No problem.
9. After some time the phone will reboot and voila, global rom.

Hope that helps. Thanks.

PS: For a moment I thought i bricked my phone, it was showing lots of erros in the file transfer. It was my crazy motherboard that do not work well with the usb type c connector, but the normal usb worked. Phew, I was so happy when it worked.

This is for the Zaza rom

Please read the forum[/QUOTE]

I try this but when my phone end the process just have a balck screem, when i push the power button i have three options, power off, reboot and lock down, i dont know what more i can do... :'crying::crying::crying::crying::crying:

 

[mburaky06]

This is for the Zaza rom

Please read the forum

I try this but when my phone end the process just have a balck screem, when i push the power button i have three options, power off, reboot and lock down, i dont know what more i can do... :'crying::crying::crying::crying::crying:[/QUOTE]

For once my phone entered a situation like this.
I have donwloaded stock chinese firmware from boycracked install it via qfil (be careful with installing via qfil dont check erase all before download on the configuration tab if you do it will erase IMEI information).
After succesfully installion of stock rom I downloaded the Zaza global rom.
After that I have entered the fastboot mode and just run flash all exe and waited for its done.
It will give errors it starta a bit delay but dont care just run the exe and wait to the end.

I hope it will help you

 

[balajipul[email protected]]

Custom ROM for Lenovo Z6 Pro

Hi All,
Request you to create a custom ROM for Lenovo Z6 Pro.
The ROM came with the phone is not good.

 

[hehk1234]

Someone know if the chineses rom recognize SD Card with exfat format ? On Global Rom (Latest Oficial 284) it don't recognize, just fat32 ;-; .... and another problem I find here, when I connect my Z6 pro on computer and I try to send some files, sometimes it lost the connection, on chinese Rom someone have this problem ?

 

[achicasar1069]

My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .

---------- Post added at 09:58 PM ---------- Previous post was at 09:43 PM ----------

Hi. I already installed the ROW version and it's like a Motorola ROM. Pure Android. Everything is translated in Spanish, which is the language I use. in auntutu it gives me the 356k than the previous ROM. It comes to update but it tells me that it cannot search because the phone was installed root. Ok Google works perfectly. If you want more capture let me know. greetings to all.

My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .

 

[mburaky06]

My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .

---------- Post added at 09:58 PM ---------- Previous post was at 09:43 PM ----------



My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .

There are some tutorials on net you can Google it but be careful never check the erase all before donwload on configuration tab

 

[benjieb]

My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .

---------- Post added at 09:58 PM ---------- Previous post was at 09:43 PM ----------



My phone is with CN 11.0.575 and parched with the ZaZz version (The .bat 00_flashrom.bat anywhere), i already have TWRP Recovery and now is rooted with Magisk. I CAN HELP WITH AL THE PROBLEMS OF YOUR SOFTWARE, But, now i want to install the ROW Secure 11.0.284 version, i cant, i dont know if is the version of my QFIL, the drivers, but the process just arribe to system_3.img and stay every time that ypu want. I dont know, but i want to try with that ROM. I just can with the CN 11.0.575 ROM, i areally want to try with ROW, im using QFIL 2.0.1.9 .

ROW 11.0.284 ??? That's possibly the worst option. If you speak english go with official Chinese ROM and get OTAs up until 11.1.105 . Has some issues but overall very good.

 

[achicasar1069]

ROW 11.0.284 ??? That's possibly the worst option. If you speak english go with official Chinese ROM and get OTAs up until 11.1.105 . Has some issues but overall very good.

Im root, ¿theres any possibility to lock the bootloader again?

 

[nakarmkir69]

Im root, ¿theres any possibility to lock the bootloader again?

Why ? You will NOT get updates?
Maybe someone knows how to black screen the notice that say the phone has unlock bootloader
I had that on a motorola g2 no announcement that bootloader is unlocked just black screen

 

[mburaky06]

I have a problem with global rom 11.0.284

When somebody call me or I call someone I can hear the voice of other side but the other side cant hear me. Does anybody know about this situation ? Thank you.

 

[GreatZero]

I have a problem with global rom 11.0.284

When somebody call me or I call someone I can hear the voice of other side but the other side cant hear me. Does anybody know about this situation ? Thank you.

I also have this problem.... I've tried multiple things but nothing works like it shoul.

Verstuurd vanaf mijn Lenovo L78051 met Tapatalk

 

[x-geo]

ROW 11.0.284 ??? That's possibly the worst option. If you speak english go with official Chinese ROM and get OTAs up until 11.1.105 . Has some issues but overall very good.

Why is they worst option? I have it, everything works fine... I think is the only one who have spanish, i don't care if i have it in English, in that case, what version is best?

 

[mburaky06]

I also have this problem.... I've tried multiple things but nothing works like it shoul.

Verstuurd vanaf mijn Lenovo L78051 met Tapatalk

Probably caused by rom because if I ise third party app for calling no problem is occured. But nobody mentioned such issue