[ROM][LineageOS][Android 10.0.0_r41][Unified]TugaPower™ 12.0

[danieldmm]

Build 04/10/2020 #OP3-T


Telegram Group: https://t.me/TugaPowerRomOP3T


#TugaPower Q 10.0.0_r41 12.0 LineageOS #laos #OnePlus

If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower

If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.

Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP

Also be sure you are using proper firmware.

Relative to gapps, the advised ones is pico package since nano its now too big to install ( ARM):

Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in settings over gestures options )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )


What does not works:

Let me know to add to second post

Changelog: TugaPower Q 12.0

Project name: android_packages_apps_Trebuchet
* Launcher3: categorize settings
* Launcher3: improve protected app names style
* Launcher3: Add support for icon packs
* Trebuchet: optimization of searching apps in Chinese

Project name: android_build
* backuptool: do not unmap dynamic partition after finished
* Bump Security String to 2020-09-05
* sign_target_apks: Replace update-payload-key.pub.pem in RECOVERY as well
* build_image: Allow disabling custom inode count calculation

Project name: android_packages_apps_Settings
* Settings: Allow removing livedisplay pref screen with config_enableLiveDisplay
* Remove useless png and add vector drawable
* Remove "storage type" preference from Settings

Project name: android_packages_apps_TvSettings
* Add rooted development option
* Add Lineage advanced reboot options
* Show Trust in security settings
* Add button to shut down device
* Settings: Implement ADB over network
* Settings: Add intent to launch LineageOS platlogo upon multiple taps
* Add build date (ro.build.date from build.prop) to About screen.
* One does not simply become a Developer
* Add LineageOS version to the About screen

Project name: external_motorola_faceunlock
* Update prebuilt apk

Project name: android_external_chromium-webview
* Update Chromium Webview to 85.0.4183.101

Project name: android_packages_apps_LineageParts
* LineageParts: Allow removing livedisplay pref screen with config_enableLiveDisplay

Project name: android_packages_apps_Messaging
* Fix NoSuchMethodError for getTypeInfo()
* Remove advanced category if no preference
* AOSP/Messaging - Changed minSdkVersion to 19.
* Fix SecurityException at getActiveSubscriptionInfoList() on N and O
* Fix app initialization issue if no permissions
* AOSP/Messaging - Changed midSdkVersion to 14 and reverted to using Telephony.Carriers.CONTENT_URI instead of Telephony.Carriers.SIM_APN_URI.
* Fix handling format based on API level accordingly.
* Remove only one Lambda Exp for JAVA 7
* Fix creating ConnectivityUtil to work on any platform
* Fix missing computeIfAbsent() method in L_MR1 and M
* Remove unnecessary methods from MmsUtils
* Allow call to phone numbers or voice mail numbers only
* Check CONFIG_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES always
* Fix ConcurrentModificationException
* Parse recipients from RESPOND_VIA_MESSAGE correctly
* Disallow making a call to emergency numbers
* Auto re-sending MMS for all the transient failures
* Remove dead code
* Check whether dialable only

Project name: android_packages_apps_SetupWizard
* ATV: Disable custom SUW if GMS SetupWraith is available

Project name: android_packages_inputmethods_LatinIME
* LatinIME: Move keyboard height setting from debug to advanced

Project name: android_device_lineage_atv
* Enable bluetooth remote pairing in Setupwraith

Project name: android_device_google_atv
* Disable Traceur on userdebug

Project name: android_device_oneplus_bacon
* bacon: Clean up kernel cmdline

Project name: android_lineage-sdk
* sdk: Add overlay for disabling livedisplay
* lineage-sdk: Run bpfix
* lineage-sdk: Fix typo for filterDisplayModes comment

Project name: android_hardware_libhardware
* audio_amplifier: Add new hook for setting amp feedback

Project name: android_hardware_qcom_audio
* audio_amplifier: Add new hook for setting amp feedback
* hal: Support the audio amplifier hook

Project name: android_hardware_qcom_display
* copybit: Export c2d header

Project name: android_hardware_qcom_media
* libc2dcolorconvert: Remove dependency on stagefright
* media: change way of accessing aosp project headers
* mm-video: remove hevc sw decoder files
* mm-video: Remove old decoder test apps

Project name: android_hardware_qcom_display
* Revert "Don't force GPU composite for older devices"

Project name: android_hardware_qcom_display
* msm8084: hwcomposer: Fix unused parameter build warning

Project name: android_system_bt
* Changed HID_DEV_MTU_SIZE from 64 to 512

Project name: android_frameworks_opt_telephony
* Use FLAG_IMMUTABLE for MultiSimSettingController

Project name: android_frameworks_base
* core: Move context-aware Bluetooth airplane mode string for translations
* WiredAccessoryManager: support for multiple display ports
* audio: update WiredAccessoryManager to use ExtconUEventObserver based on events available
* WiredAccessoryManager: Support for multiple extconn devices
* WiredAccessoryManager: update extcon file paths
* WiredAccessoryManager: Add support for DisplayPort Audio
* SystemUI: fix NPE on global actions dialog

Project name: android_vendor_lineage
* backuptool_ab: Use mv instead of cp for restore step
* apns: Enable IPV6 for China Telecom
* apns: Enable IPV6 for China Unicom
* apns: Enable IPV6 for China Mobile
* Update APNs for O2 Germany & E-Plus
* extract_utils: Fix system_ext framework blueprint generation.
* extract_utils: Add support for system_ext

Project name: proprietary_vendor_oneplus
* sm8150-common: Use source built CameraHIDL lib

Project name: android_vendor_qcom_opensource_system_bt
* Changed HID_DEV_MTU_SIZE from 64 to 512


Thanks all for the support.



Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ12_OP3.zip

MD5: 74e56af2a3bbb3aac1d2de6ea4146807

Please dont mirror for now the roms zips, thanks



Sources :
Rom:- https://github.com/LineageOS
Device:- https://github.com/LineageOS/android_device_oneplus_oneplus3
Kernel:- https://github.com/LineageOS/android_kernel_oneplus_msm8996

 

[danieldmm]

Know bugs?

Let me know to add here !

 

[Osama nisar]

Dash Charging missing
Overall best rom and good performance.

 

[danieldmm]

Dash Charging missing
Overall best rom and good performance.

You sure it's not dash charging? Or is just missing the dash charging text?

 

[trax69]

Superfast +++++ ROM!!! Daniel is TOP developer!

 

[Osama nisar]

My mistake

You sure it's not dash charging? Or is just missing the dash charging text?

I Think I was wrong. Charging rapidly==Dash charging.
Because phone charge very quick like dash Charging.
Rom is supeerr smooth with zero bugs till now

 

[prajjwal2345]

I Think I was wrong. Charging rapidly==Dash charging.
Because phone charge very quick like dash Charging.
Rom is supeerr smooth with zero bugs till now

How's the battery life? It's been 2 months atleast since I've switched to some other ROM... Feeling the need to switch again now!! Hence have restarted some exploration!?

 

[soad113]

Vou testar.. Obrigado Daniel!!

 

[danieldmm]

Build 06/20/2020 #OP3-T


Telegram Group: https://t.me/TugaPowerRomOP3T


#TugaPower Q 10.0.0_r37 5.0 LineageOS #laos #OnePlus

If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower

If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.

Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP

Also be sure you are using proper firmware.

Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)

OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )



What does not works:

Let me know to add to secod post


Changelog: TugaPower Q 5.0

Three fingers screenshot ( enable in Gestures over Settings )

Project name: android_frameworks_base
* Add a LineageOS clock
* AODTile: Rewrite AOD setting handling
* SystemUI: set no hint overlay to highest priority
* SystemUI: Long press Caffeine for infinite duration
* SystemUI: Resolve faulty keyguard clock logs outputs
* SystemUI: Adapt screenshot sound to ringer modes
* [BACKPORT] Config of LTE signal strength default value remove SNR
* SystemUI: Fix pink progress animation color in expanded Wi-Fi tile

Project name: android_packages_apps_DeskClock
* DeskClock: Remove notification sound from firing and snoozing channels
* DeskClock: Replace ViewPager with manual fragment handling
* DeskClock: Fix german translation of "days"
* DeskClock: Properly align settings
* DeskClock: Move navigation bar to bottom
* DeskClock: also apply disabled color to annotations
* DeskClock: Come to the dark side...
* DeskClock: Rework notification channel implementation
* DeskClock: Modernize timer_setup_time look
* DeskClock: Update drawables

Project name: android_device_lineage_sepolicy
* common: Move aux camera whitelist prop to vendor

Project name: android_art
* Revert "Protect/Unprotect regions (region space) only in debug build"

Project name: android_build
* Rewrite test data logic to make it faster
* More performance improvements

Project name: android_frameworks_native
* surfaceflinger: change usageBits type to uint64_t

Project name: android_frameworks_opt_telephony
* Avoid SubscriptionManager#getUriForSubscriptionId calls with invalid subIds
* Remove setIsoCountryProperty method along with partially dead code

Project name: android_system_core
* Fine tune blkio setting to improve boot time
* rootdir: init.rc: use default dirty writeout policy
* adbd: remove ifdefs guarding root/secure.

Project name: android_system_sepolicy
* Export missing audio volume properties

Project name: android_packages_providers_MediaProvider
* MediaProvider: Fix sorting by DATE_TAKEN

Project name: android_packages_apps_Etar
* Etar: Properly align preferences
* Etar: Fix crash when opening "Quick responses"
* Display hour 00 label if there is room for it.
* Don't mess with selected hour when scrolling
* Fix issue #457 and remove other bounces

Project name: android_packages_apps_Recorder
* Recorder: Prevent running into out of memory exceptions

Project name: android_packages_apps_Messaging
* Messaging: Require external legacy storage

Project name: android_packages_apps_Jelly
* Jelly: Avoid unchecked cast warning
* Jelly: Sync color{Primary,PrimaryDark,Accent} with Recorder

Project name: android_bootable_recovery
* recovery: Print the active slot
* recovery: Display recovery version
* recovery: Draw the help message below the menu on non-touch devices
* recovery: Clarify help text
* recovery: Set the INFO color to the recovery/fastboot light color

Project name: android_vendor_lineage
* Update Bulgarian dictionary


Thanks all for the support.



Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ5_OP3.zip

MD5: cab35c7f6b344bed40b06ab02dc0bb84

Please dont mirror for now the roms zips, thanks

 

[GuestK00458]

Changelog: TugaPower Q 5.0

Three fingers screenshot ( enable in Gestures over Settings )

Project name: android_frameworks_base
* Add a LineageOS clock
* AODTile: Rewrite AOD setting handling
Etc....

This seems the change log of Lineage, did not find any Tugapower specific change log, options or settings.

What makes Tugapower Tugapower?
Can not find anything about it on the website also, as who are the main dev's, how long it exists, etc...

And is SELinux enforced on this ROM?

 

[danieldmm]

This seems the change log of Lineage, did not find any Tugapower specific change log, options or settings.

What makes Tugapower Tugapower?
Can not find anything about it on the website also, as who are the main dev's, how long it exists, etc...

And is SELinux enforced on this ROM?

That's normal it's like lineage changelog, rom is based on Lineage, the changes are MicroG support, three finger screenshot, and use of mock locations apps reported as real GPS been using. This 3 things for the time being its the change from LineageOS, and yes, selinux is enforced, if you use without root you can even lock bootloader that rom will boot just fine.

 

[danieldmm]

Build 06/28/2020 #OP3-T


Telegram Group: https://t.me/TugaPowerRomOP3T


#TugaPower Q 10.0.0_r37 6.0 LineageOS #laos #OnePlus

If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower

If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.

Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP

Also be sure you are using proper firmware.

Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)

Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )



What does not works:

Let me know to add to secod post


Changelog: TugaPower Q 6.0

Face Unlock ( no gapps needed )

Project name: android_frameworks_base
* Fix build errors
* Fix BLE transport discovery scan filter
* BT: Relocate A2DP codec strings for translation
* Enable codec change request when mode changes in aptX-adaptive
* Keep a null check before accessing the BluetoothA2dpWrapper APIs.
* Bluetooth: Fix for out of bound exception
* BT Dev: Increase array size for codec selection in Dev Op
* Keep the BluetoothHeadset finalize() method protected
* Bluetooth: Fix for Global reference table overflow issue[1/2]
* BT: Add new intent to broadcast IOT device details
* BT_Audio: Updated Check for TWS+ switch
* TWS_A2DP: Handle active device change between TWS+ earbuds
* audio: Add support for APTX TWSP audio codec
* audio: Add support for audio extended codecs
* Use BluetoothUtils instead of Utils
* GAP: Handle the race condition cases in auto connect logic
* Obex: Squashed commit of the following
* Add scan filter for Transport Discovery data
* Support CALLBACK_TYPE_SENSOR_ROUTING
* Add support for Transport discovery AD type (1/2)
* Bluetooth: TWSP: Support Battery Status information display
* BT: Send info if call is CS type from telecomm service to BT apps.
* GAP: Reset bondingInitiatedLocally flag(1/3)
* Bluetooth-TWS: Disable outgoing connection to 2nd earbud
* Bluetooth-TWS: Disable outgoing connection for 2nd earbud.
* Bluetooth: Rename bluetooth property to support new P Treble rules
* Bluetooth: Unpair both earbuds on unpair.
* Bluetooth: Add SDK API support for TWS feature (2)
* Revert the change: AudioService: remove dead BT code.
* TWS-A2DP: Add TWS+ codec to DevUI support
* BT: Adding aptX-Adaptive codec entry to Framework
* Add BluetoothQualityReport class(1/2)
* TextureVuew rebind GL texture, if AHB content has changed
* SystemUI: QS Details: Fix layout issues
* SystemUI: Fix issue with Bluetooth tile
* SystemUI: Fix QS Detail Header

Project name: android_device_qcom_sepolicy
* sepolicy: cnd: Allow access to wifi_prop

Project name: android_lineage-sdk
* LineageSettingsService: prevent setting net.hostname to null

Project name: android_frameworks_opt_telephony
* Telephony: Add option for using regular poll state for airplane mode

Project name: android_system_bt
* GAP: Reset bondingInitiatedLocally flag(3/3)
* Bluetooth: Enable Hybrid Audio from stack
* Add scan filter for Transport Discovery data
* TWS-A2DP: Add TWS+ codec index
* Bluetooth: Support to know if there is High Def call
* BT: API to update quiet mode status in Adapter service [3/3]
* BT: Adding APTX-Adaptive codec to BT HAL
* Add BLE Scan Phy parameter to scan API
* Bluetooth: Add SDK API support for TWS feature (1)

Project name: android
* manifest: Sync sm8250 HALs
* lineage: Track QTI BT repos
* manifest: Switch to our external/skia fork

Project name: android
* manifest: Sync sm8250 HALs
* lineage: Track QTI BT repos
* manifest: Switch to our external/skia fork

Project name: android_hardware_qcom_audio
* hal: msm8974: Use stereo recording depending on camera orientation
* hal: msm8974: Fix the wrong device for AUDIO_SOURCE_CAMCORDER

Project name: android_hardware_qcom_media
* media: Exclude libplatformconfig from OSS builds
* media: Include display_headers instead of display_intf_headers
* media: libOmxSw encoders require prop headers
* media: Use project pathmap

Project name: android_hardware_qcom_audio
* a2dp: Add a null check before iterating over a2dp.adev->usecase_list
* hal: Add missing includes
* audio_extn: Allow skipping compilation of audio HAL extensions
* audio: Skip libhdmipassthru on OSS builds
* audio: Use direct project pathmap
Project name: android_hardware_qcom_display
* gralloc: Add option for YCrCb venus camera preview
* gralloc: Allow devices to opt-in for YCrCb camera preview
* Add C2D_FORMAT_BT601_FULLRANGE to C2D_FORMAT_MODE
* Add C2D_COLOR_FORMAT_420_TP10 to C2D_YUV_FORMAT
* Don't build lights module if vendor supplies it
* display: Use project pathmap

Project name: android_packages_apps_Etar
* Automatic translation import
* Fix errors caught by aapt2
* Allow app to upgrade database on install.
* Force a manual, incremental sync one time, as early as possible.
* Abort onClick if no Window Focus
* Remove negative margin fron all day label
* Call build() on the Builder, not the Style.
* Small workaround when text is slight bigger then all day event rect.
* Fix small typos in I9490f478681783200a5cb8309a58243723bda4c1.
* Fix bug in recurrent event dialog picker when setting monthly day of the week.
* Add in-memory cache to dismiss alerts that we haven't seen yet.
* Fix mokey NullPointerException when there is no colors to save.
* Fixed ISE issue when subscribing to gcm groups from the main thread.
* Fix crash when dismissing notification.
* Fix calander crash where getTimezone was call without a looper.
* Fix issue with error message being displayed on tablets.
* Remove dead code in AlarmService.
* Display error when a viewed event has been deleted.
* Capitalize Noon and Midnight in event edit view.
* Fixed leak cursor in AlertReciever
* DayView: Revert all whitespace changes
* Etar: Fix invalid string parameter
* Etar: Fix android:targetPackage for shortcut
* Etar: String improvements
* Etar: Restore tests
* AOSP/Calendar - Minimal calendar app.
* Update code coverage filter
* Etar: Fix translatables
* Etar: Fix content provider rebrand

Project name: android_packages_apps_Bluetooth
* Stub TWS related APIs
* GAP: Reset bondingInitiatedLocally flag(2/3)
* BT: API to update quiet mode status in Adapter service [1/3]
* Bluetooth: Enable Hybrid Audio from App
* Add BLE Scan Phy parameter to scan API

Project name: android_packages_apps_Snap
* Snap: Report device orientation to Audio HAL

Project name: android_packages_apps_Settings
* BT: Use translated a2dp codec strings
* codec support for DevUI am: f915bd9438
* BT Settings: Adding aptX Adaptive codec entry in Settings
* Bluetooth-TWS: UI updates based on Filter matched
* Bluetooth-TWS: UI updates based on profile connection.
* Fix build error
* Bluetooth-TWS: Filter TWS devices
* Bluetooth: Create new catogory for earbuds

Project name: android_packages_apps_Dialer
* Fix translation of 'contacts' tab title and main menu.

Project name: android_packages_services_Telecomm
* Bluetooth: Support to know if there is High Def call

Project name: android_vendor_lineage
* qcom: Add UM 4.19 platforms
* qcom: Add atoll platform
* config: Move default alarm/notification/ringtone sound props to /product


Thanks all for the support.



Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ6_OP3.zip

MD5: 5bffb0b44a1f4716462d27fd7d0ed6d2

Please dont mirror for now the roms zips, thanks

 

[trax69]

Super fast ROM. TOP!

 

[danieldmm]

Build 10/07/2020 #OP3-T


Telegram Group: https://t.me/TugaPowerRomOP3T


#TugaPower Q 10.0.0_r37 7.0 LineageOS #laos #OnePlus

If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower

If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.

Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP

Also be sure you are using proper firmware.

Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)

Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )



What does not works:

Let me know to add to secod post


Changelog: TugaPower Q 7.0

Project name: android_device_oneplus_oneplus3
* op3: Rollback to stock GPS blobs and disable QC location
* op3: Checkout pie gps config
* op3: Fix build errors with libgps.utils.so

Project name: proprietary_vendor_oneplus
* op3: Switch back to pie gps blobs

Project name: android_packages_apps_Etar
* Update readme (#728)
* Release new 1.0.22 version (#725)
* Make use of system theme setting on android 10 (#715)
* update submodules

Project name: android_packages_apps_Dialer
* Dialer: Use a DayNight launch theme

Project name: android
* manifest: Track AOSP TV app

Project name: android_packages_apps_Settings
* Settings: Fix fallback summary for power_button_instantly_locks preference

Project name: android_packages_services_Telephony
* Explicitly grant START_ACTIVITIES_FROM_BACKGROUND to com.android.phone.

Project name: android_device_qcom_sepolicy
* sepolicy: cnd: Fix wifi_prop neverallow for compatible props
* sepolicy: cnd: Allow access to wifi_prop

Project name: android_hardware_qcom_display
* gralloc: Add option for unaligned YCrCb pixel format

Project name: android_frameworks_base
* Fix typos related to sortSelectionIndices
* Fix app crash if the selection is from reverse direction.
* SystemUI: Call setOnlyAlertOnce(true) for PowerShare notification
* BLE: Fix NPE during start advertising
* Explicitly grant START_ACTIVITIES_FROM_BACKGROUND to com.android.phone.

Project name: android_vendor_lineage
* Export CAF msm-4.14 audio headers

Project name: android_vendor_qcom_opensource_system_bt
* AVRCP: Ignore AVRCP version when registering absolute volume feature


Thanks all for the support.



Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ7_OP3.zip

MD5: 5bffb0b44a1f4716462d27fd7d0ed6d2

Please dont mirror for now the roms zips, thanks

 

[Primokorn]

Since Q6 has already been released I guess you wanted to say Q7: TugaPowerQ7_OP3.zip

 

[danieldmm]

Since Q6 has already been released I guess you wanted to say Q7: TugaPowerQ7_OP3.zip

Indeed, bad typo. Thanks for the heads up. Link fixed.

 

[lapirado]

The rom is well builded. Great work ?
Is normal that the rom ain't come with a camera app? ? And have tried 7/8 versions of gcam, they all are FC. Same with oneplus camera app too.

 

[danieldmm]

Build 19/07/2020 #OP3-T


Telegram Group: https://t.me/TugaPowerRomOP3T


#TugaPower Q 10.0.0_r40 9.0 LineageOS #laos #OnePlus

If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower

If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.

Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP

Also be sure you are using proper firmware.

Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)

Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )



What does not works:

Let me know to add to secod post

Changelog: TugaPower Q 9.0

Project name: android_frameworks_base
* Teaches the ProcessCpuTracker about USAPs.
* Adds Zygote policy flags to control how applications are launched
* Start process of next activity with top priority in advance
* Fixed an issue Zygote initialization.
* Improved timekeeping logic for USAP Pool refill mechanism.
* Resets the refill action/timing info after a pool fill event.
* Make the USAP Pool refill delay configurable.
* Re-adds a trace point that was accidentally removed.
* Moved some thread priority changes.
* Adjust Java Language thread priority in new processes.
* Adjusts the USAP pool refill mechanism.
* Change USAP name to application name as soon as possible.
* SystemUI: Use regular global_actions_column layout for layout-sw600dp-land
* SystemUI: use DOUBLE_TAP_TO_WAKE setting also for wake from aod
* fw/b: Add support for per app network isolation

Project name: android_packages_apps_Settings
* Settings: Add support for per app network isolation

Project name: android_packages_apps_Jelly
* Jelly: Fix find in page functionality

Project name: android_packages_apps_DeskClock
* DeskClock: Setup data model before calling super.onStart()

Project name: android_hardware_qcom_display
* gralloc: Add option for unaligned YCrCb/YCbCr pixel format height

Changelog: TugaPower Q 8.0

Project name: android
* July Security Update ( android-10.0.0_r40 )

Project name: android_vendor_lineage
* lineage: update GMS updater component disable list
* Remove deprecated backup overlay

Project name: android_vendor_qcom_opensource_packages_apps_Bluetooth
* Clean up duplicate uses-permission entries

Project name: android_device_oneplus_oneplus3
* tunned GPS little more


Thanks all for the support.



Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ9_OP3.zip

MD5: bf5cc768f423a778a0227e768499f549

Please dont mirror for now the roms zips, thanks

 

[danieldmm]

The rom is well builded. Great work
Is normal that the rom ain't come with a camera app? ? And have tried 7/8 versions of gcam, they all are FC. Same with oneplus camera app too.

ROM does comme with Snap cam ( default from lineage OS )
Gcam also works just fine with rom

 

[Primokorn]

Fingerprint no longer works after disabling airplane mode. Could you always allow fingerprint (also at boot)?