• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][LineageOS][N801x/N8000][ALPHA][10/08/2017]Nougat

Search This thread

macgd016

Member
Oct 8, 2008
11
0
Finally loaded Lineage 14.1

I have spent many hours reading this thread but have not read all of it so apologies if I am repeating something that has already been covered........

I have just updated my GT-N8010 with lineage-14.1-20170810-UNOFFICIAL-n8013.zip + open_gapps-arm-7.1-mini-20181010.zip & used the latest TWERP release 3.0.2 to do this.

I initially tried loading these two as above, the first issue was that having loaded them the tablet would get stuck with a battery symbol and would not boot. The way I found around this was to boot the tablet into Odin mode but choose Reboot Phone rather than going into Odin itself. This then enabled Lineage to boot but it then got stuck in a loop, the lineage logo would go through its line with a moving O, then have three O's and start again.

Eventually I found that I could get cm-13.0-20160831-UNOFFICIAL-n8013.zip to load with open_gapps-arm-7.1-mini-20181010.zip and this worked well. I then did a dirty load (No Wiping) of lineage-14.1-20170810-UNOFFICIAL-n8013.zip and this is now working without problems.

Hope this helps and best of luck!!
 

secretwolf98

Senior Member
Jan 30, 2017
1,450
622
20
Iowa
ryzen5-3600.github.io
I have spent many hours reading this thread but have not read all of it so apologies if I am repeating something that has already been covered........

I have just updated my GT-N8010 with lineage-14.1-20170810-UNOFFICIAL-n8013.zip + open_gapps-arm-7.1-mini-20181010.zip & used the latest TWERP release 3.0.2 to do this.

I initially tried loading these two as above, the first issue was that having loaded them the tablet would get stuck with a battery symbol and would not boot. The way I found around this was to boot the tablet into Odin mode but choose Reboot Phone rather than going into Odin itself. This then enabled Lineage to boot but it then got stuck in a loop, the lineage logo would go through its line with a moving O, then have three O's and start again.

Eventually I found that I could get cm-13.0-20160831-UNOFFICIAL-n8013.zip to load with open_gapps-arm-7.1-mini-20181010.zip and this worked well. I then did a dirty load (No Wiping) of lineage-14.1-20170810-UNOFFICIAL-n8013.zip and this is now working without problems.

Hope this helps and best of luck!!

I have a updated version here, https://forum.xda-developers.com/galaxy-note-10-1/development/rom-lineageos-14-1-t3848514, if you would want something more up-to-date.
But, I will be updating it later this week.
 

bateman19

New member
Oct 16, 2018
2
0
Did I spoiled it?

Hi guys, i tried to update my GTN-8000 to Nouggat version, but i fel that i ruined it because im in this loop, ¿how can i fix it?
 

yaboo007

Member
Mar 12, 2010
43
2
Hi I recently tried the latest n8000 rom to no avail. The same as the previous 2017 rom, My n8000 installs the rom correctly but when it comes to setting up the wifi I get no further as I am not able to get a keyboard up to type my wifi password. Is there resolution to this issue please.
 

bapper92

New member
Dec 5, 2018
1
0
Quick question.... Ive been trying to install this rom on N8000, however, after the installation is complete (ROM + Gapps) i keep getting stuck on bootloop. Ive been reading for... 5 hours now and i cant find anything so i decided to write here.
So what ive done is after getting stuck in the bootloop for the 1st time:
1. Stock rom installation
2. Downloading lineage-14.1-20170810-UNOFFICIAL-n8000 + gapps for 7.1 ARM nano
3. going to twrp and doing a wipe on dalvik,system + cache.
4. Flashing Lineage rom + Gapps, reboot - > i get stuck in that boot loop -> going back to twrp - reset again and going back to point 1 via ODIN 3 3.12

Any idea what im doing wrong? Also its the WiFi + 3G. I know there is a possibility for the SIM to be not detected but im willing to take the risk :|

Thank you in advance
 

ruinetto

New member
May 23, 2017
2
0
Recife
Samsung Galaxy S10+
Quick question.... Ive been trying to install this rom on N8000, however, after the installation is complete (ROM + Gapps) i keep getting stuck on bootloop. Ive been reading for... 5 hours now and i cant find anything so i decided to write here.
So what ive done is after getting stuck in the bootloop for the 1st time:
1. Stock rom installation
2. Downloading lineage-14.1-20170810-UNOFFICIAL-n8000 + gapps for 7.1 ARM nano
3. going to twrp and doing a wipe on dalvik,system + cache.
4. Flashing Lineage rom + Gapps, reboot - > i get stuck in that boot loop -> going back to twrp - reset again and going back to point 1 via ODIN 3 3.12

Any idea what im doing wrong? Also its the WiFi + 3G. I know there is a possibility for the SIM to be not detected but im willing to take the risk :|

Thank you in advance

Hello, bapper92!
You all right?

I also own a N8000 and I've been in the adventures of customizations and modifications of mobile devices for some years now.

From my recent experience and knowledge, what is causing your bootloop is the option chosen when the TWRP arrives at the final stage of the process, which is the "SuperSU check".

[Solution]: Repeat all steps in the same way, and when you get to this screen, choose "DO NOT INSTALL" instead of "Swipe to install".

TWRP is probably unable to recognize that your device is already rooted and consequently can not properly apply your script, damaging ROM initialization.

Give some feedback to us after trying this my tip.
I hope you succeed! ;)
 

icesilver18

Senior Member
Jul 31, 2013
74
30
Sta. Rosa
I just want to say HUGE THANKS for sharing this thread and all the members who helped this community!

For those who had issues like stuck in bootloop & unable to root their device, I'll share mine on how I managed to install flawlessly after numerous tries.
My Device: GT-N8000


1. Download Lineage ROM, Gapps, & addonsu-14.1-arm-signed.zip. https://forum.xda-developers.com/devdb/project/dl/?id=26052
https://opengapps.org/ Please take note that you should choose >ARM >7.1 >(Variant: depends on what you need, I chose Full) & https://download.lineageos.org/extras
2. Boot to TWRP (I'm using "twrp-2.8.5.0-gt-n8000") then do a Wipe > Factory Reset.
3. Flash Lineage 14.1 rom then do a wipe dalvik/cache. Then flash Gapps then do a wipe dalvik/cache.
4. Boot to system & wait patiently, booting device may take while. After setup of new device, enable Developer Options in settings.
5. Boot to TWRP again, install addonsu-14.1-arm-signed.zip, do not wipe dalvik/cache, reboot system. Note: I failed rooting using latest version of 15.1 addon, that's why I tried 14.1 & it works perfectly.
6. Go to Developer Options >Root Access >Choose Apps & ADB. Then install Root Checker to confirm root.
7. Use Virtual Keyboard or download keyboard app. Then download Google Camera.

Cheers to all and Happy New Year! :cowboy:
 

Top Liked Posts

  • There are no posts matching your filters.
  • 120
    LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
    It can be used without any need to have any Google application installed.
    CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    STATUS: ALPHA
    This is a preview build, do not install it if you want a stable ROM.

    • This is a preview of what is going down on CM14.1
    • Rom is in beta state so many bugs are to be expected!
    • All the source code is available on my Github.
    • I do this on my free time and unfortunately I don't have much.
    • Any help is a appreciated!

    LINKS IN SECOND POST

    Source code: https://github.com/lirokoa

    CREDITS:
    • The whole Cyanogenmod team
    • Special thanks @dhiru1602 for his awesome work on exynos 4
    • All people who works on the Exynos 4 SOC, they desserve it :)

    XDA:DevDB Information
    LineageOS N801X/N8000, ROM for the Samsung Galaxy Note 10.1

    Contributors
    lirokoa
    Source Code: https://github.com/lirokoa

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.0.x

    Version Information
    Status: Alpha

    Created 2016-11-22
    Last Updated 2017-08-10
    58
    How to install:
    Follow the usual procedure, important things is to use supported recovery, you can download it from the download section.
    Also do not forget, wipe everything, install rom, then gapps without reboot between!
    Others recovery will not be supported!
    Also if you come from another ROM, full wipe is required.

    FAQ:
    • Which Gapps to use? OpenGapps works great, you can get them from here
    • After installing ROM + Gapss, GApps keep crashing: Just update your recovery with the provided twrp (in cm-13.0 thread)
    • Keyboard does not work: enable hardware keyboard in settings.
    • If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
    • Camera is not working: use google camera

    SECURITY WARNING:
    SElinux is set to permissive, I'm tired of rewriting those rules...
    23
    Charging while tablet is off will be fixed in next release for those who are interested.
    18
    New build incoming.
    N8013 is up, N8000 will follow.

    N8000 users, please let me know if wifi tethering is fixed, thank you.