[ROM][LineageOS13.0][Marshmallow][Android 6.0.1] NightOwl 20171029-Fixed

[nokiamodeln91]

Beta 5 running smooth and fine.. Thank you bauner.

 

[clod22]

The beta 5 is finish as OTA update and manual download

Changes Beta5:

* Updated cm sources
* April security patches
* Opensource libUMP
* Fixed crash in clock settings
* Start macloader later
* Start gps later
* Added more timeservers for gps
* Disable hw keys and enable navbar in settings
* Some sepolicy updates to set enforcing in future versions
* Translations for the gesture settings
* Trim on reboot support (if you create a file "trim" on the /cache partition)
* Merged some updates from the smdk4412 kernel
* mm: remove compressed copy from zram in-memory
* Modified art settings to fix playstore crashes
* Optional twrp 2.8.7.0 and 3.0.2 IsoRec recovery

I tried already, for now is excellent, Thank for your hard work.

 

[tamaraxxx]

Beta 5 running smooth and fine.. Thank you bauner.

Same here. No problems so far.
Thanks @bauner for the great support.

Ps, did my log gave you an indication off the Bluetooth headset problem?

Sent from my Samsung GT-N7000 using XDA Labs

 

[grafs83]

my problem with file manager settings is resolved.
Beta 5 works fine. Thanks @bauner for the great support.

 

[bauner]

Same here. No problems so far.
Thanks @bauner for the great support.

Ps, did my log gave you an indication off the Bluetooth headset problem?

Sent from my Samsung GT-N7000 using XDA Labs

I see some tinyalsa, mixer and a2dp errors but I currently could not find the reason

 

[hf97542]

Thanks for sharing, there is no phone call recording function

---------- Post added at 03:13 AM ---------- Previous post was at 03:04 AM ----------

I see some tinyalsa, mixer and a2dp errors but I currently could not find the reason

Thanks for sharing, there is no phone call recording function

---------- Post added at 03:21 AM ---------- Previous post was at 03:13 AM ----------

I see some tinyalsa, mixer and a2dp errors but I currently could not find the reason

I installed a lot of phone recording software, do not support, can not do a built-in telephone recording software patches, thank you.

---------- Post added at 03:31 AM ---------- Previous post was at 03:21 AM ----------

Thanks for sharing, there is no phone call recording function---------- Post added at 03:13 AM ---------- Previous post was at 03:04 AM ----------Thanks for sharing, there is no phone call recording function---------- Post added at 03:21 AM ---------- Previous post was at 03:13 AM ----------I installed a lot of phone recording software, do not support, can not do a built-in telephone recording software patches, thank you.

There is also a version of the GPS positioning is relatively slow, this edition has improved?

 

[Lanchon]

PSA:

you can now repartition your N7000 without a PC and without loosing your data
head on over here... REPIT

 

[grafs83]

Three problems have remained:
1 reboot after the second incoming call
2 sometimes appear lockpattern on lockscreen while incoming call or alarm
3 can not put my location in the cLock weather widget, as appears another city there. Weather is also not showing in notification panel
(3 is solved. I deleted weather widget, stopped and deleted all data. Then wipe dalvik and formatted cashe. That helped!)
otherwise everything smooth so far

 

[madsun]

PSA:

you can now repartition your N7000 without a PC and without loosing your data
head on over here... REPIT

Hi Lanchon,
I would like to have a 3GB System, 6GB data, minimum preload and maximum SDcard. for the N7000. How do I go about this? Please help me.
Thanks and Regards

Madsun

 

[nursoda]

I would like to have a 3GB System, 6GB data, minimum preload and maximum SDcard. for the N7000.

RTFM? I did not test, but according to https://github.com/Lanchon/REPIT/blob/master/README.md , you just need to download https://www.androidfilehost.com/?fid=24459283995314133 , rename and flash it.

 

[bauner]

PSA:

you can now repartition your N7000 without a PC and without loosing your data
head on over here... REPIT

Thx for it. It is a very useful thing

Hi Lanchon,
I would like to have a 3GB System, 6GB data, minimum preload and maximum SDcard. for the N7000. How do I go about this? Please help me.
Thanks and Regards

Madsun

Why do you need so much space on the /system partition? 2Gb should be more than enough to fit also big gapps packages.

I made 2 zip files:

lanchon-repit-20170115-system=same+keep-data=6G+keep-sdcard=max+keep-preload=same+keep-n7000.zip
Download: https://www.androidfilehost.com/?fid=673956719939820794
system=unmodified
data=6gb
sdcard0=~7gb
preload=unmodified (to make it possible to go back to a stock rom without the need to repartition again)

lanchon-repit-20170115-system=2G+keep-data=6G+keep-sdcard=max+keep-preload=min+wipe-n7000.zip
Download: https://www.androidfilehost.com/?fid=962187416754461654
system=2gb (if you really need 3gb system just rename -system=2G to -system=3G)
data=6gb
sdcard0=something around 6gb
preload=a few mb

Here you can find more details about how to modify the filename if you want different partition layouts:
https://github.com/Lanchon/REPIT

I have tested the first one myself with the isorec twrp (it will not work with the philz recovery) and it worked well without any data loss.
Installing it from the sdcard1 will fail the first time (because the sdcard is in use and can't unmounted) but the file gets copied to /tmp in this step.
After this select the file to install from /tmp again and it should work
But to go sure make a backup of your rom and sdcard0 before you start.

 

[justgamer01]

On Monday I built RR for the n7000 successfully, later I flashed it and noticed that my SIM wasn't working. So i checked my IMEI and it showed UNKNOWN and my BASEBAND too.
Today I flashed NightOwl Rom and now it's working perfectly!
What did I do wrong?

EDIT:
I have to say that, I built it two times and on both builds it didn´t work.

 

[bauner]

On Monday I built RR for the n7000 successfully, later I flashed it and noticed that my SIM wasn't working. So i checked my IMEI and it showed UNKNOWN and my BASEBAND too.
Today I flashed NightOwl Rom and now it's working perfectly!
What did I do wrong?

EDIT:
I have to say that, I built it two times and on both builds it didn´t work.

Which repos do you use?
Did you include all the needed ril changes, samsung_symbols and ril_wrapper in galaxys2-common,n7000 and hardware/samsung?

and also this commits?
http://review.cyanogenmod.org/#/c/122713/
http://review.cyanogenmod.org/#/c/123287/

 

[daneal2u]

On Monday I built RR for the n7000 successfully, later I flashed it and noticed that my SIM wasn't working. So i checked my IMEI and it showed UNKNOWN and my BASEBAND too.
Today I flashed NightOwl Rom and now it's working perfectly!
What did I do wrong?

EDIT:
I have to say that, I built it two times and on both builds it didn´t work.

I have been compiling rr rom for N7000. U can find the latest builds here https://www.androidfilehost.com/?w=profile&uid=24459283995312800

---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------

Which repos do you use?
Did you include all the needed ril changes, samsung_symbols and ril_wrapper in galaxys2-common,n7000 and hardware/samsung?

and also this commits?
http://review.cyanogenmod.org/#/c/122713/
http://review.cyanogenmod.org/#/c/123287/

@bauner ril works fine on my rr builds, do I need to merge these commits?

 

[bauner]

I have been compiling rr rom for N7000. U can find the latest builds here https://www.androidfilehost.com/?w=profile&uid=24459283995312800

---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------


@bauner ril works fine on my rr builds, do I need to merge these commits?

If the ril is working in your build then you have all the needed ril commits

 

[justgamer01]

Which repos do you use?
Did you include all the needed ril changes, samsung_symbols and ril_wrapper in galaxys2-common,n7000 and hardware/samsung?

and also this commits?
http://review.cyanogenmod.org/#/c/122713/
http://review.cyanogenmod.org/#/c/123287/

I used this repos:
android_kernel_samsung_tw_n7000
cm-android_device_samsung_galaxys2-common
cm-android_device_samsung_n7000
cm-proprietary_vendor_samsung
cm-android_hardware_samsung

But I didn't include the commits.

 

[bauner]

I used this repos:
android_kernel_samsung_tw_n7000
cm-android_device_samsung_galaxys2-common
cm-android_device_samsung_n7000
cm-proprietary_vendor_samsung
cm-android_hardware_samsung

But I didn't include the commits.

In my repos you have the needed commits.

But you can check if you have this commit in frameworks/native
http://review.cyanogenmod.org/#/c/123287/

 

[medievalspawn]

which modem to use in Italy with this version ? thank you

 

[giogio1]

Thx for it. It is a very useful thing


Why do you need so much space on the /system partition? 2Gb should be more than enough to fit also big gapps packages.

I made 2 zip files:

lanchon-repit-20160406-system=same+keep+ext4-data=6+keep+ext4-sdcard=max+keep+vfat-preload=same+keep+ext4-n7000.zip
Download: https://www.androidfilehost.com/?fid=24499762635999029
system=unmodified
data=6gb
sdcard0=~7gb
preload=unmodified (to make it possible to go back to a stock rom without the need to repartition again)

lanchon-repit-20160406-system=2+keep+ext4-data=6+keep+ext4-sdcard=max+keep+vfat-preload=min+wipe-n7000.zip
Download: https://www.androidfilehost.com/?fid=24499762635999027
system=2gb (if you really need 3gb system just rename -system=2 to -system=3)
data=6gb
sdcard0=something around 6gb
preload=a few mb

Here you can find more details about how to modify the filename if you want different partition layouts:
https://github.com/Lanchon/REPIT

I have tested the first one myself with the isorec twrp (it may fail with the philz recovery) and it worked well without any data loss.
Installing it from the sdcard1 will fail the first time (because the sdcard is in use and can't unmounted) but the file gets copied to /tmp in this step.
After this select the file to install from /tmp again and it should work
But to go sure make a backup of your rom and sdcard0 before you start.

Excuse me Bauner... Do you think I should increase the size of the system partition ?

 

[bauner]

which modem to use in Italy with this version ? thank you

xxlt3 should work fine

Excuse me Bauner... Do you think I should increase the size of the system partition ?

The /system partition is only used for the rom +gapps +some mods like xposed

If you don't want to use a bigger gapps package then you don't need to enlarge it.