[ROM] [LP] [5.0] [RE/DE] [Xposed] [MultiSystem] JasmineROM v6.1 [Sep 11, 2015]

What's your preferred debloating method for future versions of JasmineROM?


  • Total voters
    850

skrowl

Senior Member
Aug 26, 2009
204
27
0
USA
www.denialofservice.org
Is Auto Mount option required?

Updated Jasmin 6.0.1 patch via FlashFire

without problem.

Note:
In Flashfire, use Zip option and Auto Mount selected.
After reboot screen goes black for a while, be patient.
When its done, my phone System would not respond. (Wait or Close)
I had to pull the battery / cold reboot for it to fully boot again.

Thanks
I just did the regular (without auto mount selected) and it seems to have worked correctly. Should I do it again with auto mount selected?
 

midimench

Senior Member
Oct 18, 2010
397
70
0
Lawndale
The 6.0 to 6.01 flashed quickly and easily using Flashfire.

Sent from my Note 3 with Jasmine 6.0

---------- Post added at 09:35 AM ---------- Previous post was at 09:18 AM ----------

What is this LMT feature in the new Jasmine 6.0, and why do I want it?

Sent from my Note 3 with Jasmine 6.0
 

Sporttster

Senior Member
Nov 5, 2011
176
15
0
Indiana,US
Doesn't your update info say it's possible to go from 4.3 rooted to this new 6.0 flashing on stock with no problem and keep root?? I'm confused..... now you're saying it's not possible???? I'm not using Multisystem or Safestrap, just simply updating.
 

hsbadr

Inactive Recognized Developer
May 18, 2014
3,930
22,397
0
Doesn't your update info say it's possible to go from 4.3 rooted to this new 6.0 flashing on stock with no problem and keep root?? I'm confused..... now you're saying it's not possible???? I'm not using Multisystem or Safestrap, just simply updating.
Who said it's not possible?!! You can upgrade from JB to JasmineROM v6.x by following the announcement post instructions. If something went wrong (you did a mistake), you may lose root.
 

Sporttster

Senior Member
Nov 5, 2011
176
15
0
Indiana,US
If you're on JB, no LP IMG will boot for you.
The only thing I think is confused here is I wanted to flash it to stock, not MS it which is what you're saying as a IMG. I think. So....if I want to flash this direct to stock using flashfire, as I'm on 4.3 rooted, I can do it but yes, risk losing root if not done properly, but I can do it and it can get me to ROOTED Jasmine 6.01...correct???
 

hsbadr

Inactive Recognized Developer
May 18, 2014
3,930
22,397
0
The only thing I think is confused here is I wanted to flash it to stock, not MS it which is what you're saying as a IMG. I think. So....if I want to flash this direct to stock using flashfire, as I'm on 4.3 rooted, I can do it but yes, risk losing root if not done properly, but I can do it and it can get me to ROOTED Jasmine 6.01...correct???
Yup. You should flash OF1 partial firmware via Odin AFTER successful installation of JasmineROM (it will NOT boot until you Odin the partial firmware & then, you won't be able to roll back to JB 4.3 or KK 4.4.2). Read everything in the announcement post & watch the video tutorials.
 
  • Like
Reactions: Sporttster

Sporttster

Senior Member
Nov 5, 2011
176
15
0
Indiana,US
Cool, thanks! If I ever get brave enough to actually do this, I'll definitely support ya $$!! 8} ...gotta get up the courage, though... one other question...do I stay connected to the PC via the usb through all of this or connect after having flashed via flashfire and THEN connect and Odin???
 
Last edited:

profman03

Member
May 16, 2011
39
2
0
Soooo, going from 5.1.1 as a virtual rom...

Do I need to wipe everything, including the stock rom? I'm assuming I should just do a clean install over the stock rom and NOT import settings from titanium backup?

Thanks all, first time updating a virtual rom on multi system!

---------- Post added at 02:19 PM ---------- Previous post was at 01:43 PM ----------

To clarify, I guess I'm asking when you are in recovery and wipe data, does that wipe data for both the stock system AND virtual image?
 

Killawonka

Member
Sep 23, 2013
47
6
0
Im trying to upgrade to the new Jasmine 6.0 rom. i dont know exactly how i did it or what i did, but i have no stock system. When I hold down the menu button to boot to stock, its stuck on the samsung screen. how can i put a stock rom on it so i can upgrade to 6.0. im on Jasmine 5.02 and its running virtual rom.
 
  • Like
Reactions: adsa.2015

bd177

Senior Member
Jan 26, 2010
476
142
73
Tonawanda NY
Im trying to upgrade to the new Jasmine 6.0 rom. i dont know exactly how i did it or what i did, but i have no stock system. When I hold down the menu button to boot to stock, its stuck on the samsung screen. how can i put a stock rom on it so i can upgrade to 6.0. im on Jasmine 5.02 and its running virtual rom.
I thought you hold the Home button down to boot to stock.
 

midimench

Senior Member
Oct 18, 2010
397
70
0
Lawndale
Sorry, thats what i met
I was forced to install 6.0 as my stock rom and it worked fine. Follow hsbadr instructions which includes copy the Jasmine 6.0 zip file to your internal card, I always use the download folder. Then be sure you have the latest Flashfire installed which is beta 0.24. Shut down the phone and remove the SD card and reboot. Now you can restart the phone and flash the Jasmine zip file and you're good to go.

Sent from my Note 3 with Jasmine 6.01
 

Killawonka

Member
Sep 23, 2013
47
6
0
I was forced to install 6.0 as my stock rom and it worked fine. Follow hsbadr instructions which includes copy the Jasmine 6.0 zip file to your internal card, I always use the download folder. Then be sure you have the latest Flashfire installed which is beta 0.24. Shut down the phone and remove the SD card and reboot. Now you can restart the phone and flash the Jasmine zip file and you're good to go.

Sent from my Note 3 with Jasmine 6.01
The problem I have with that, is once i take the sd card out it stays stuck on the Samsung screen
 

hsbadr

Inactive Recognized Developer
May 18, 2014
3,930
22,397
0
JasmineROM v6.1 (N900VVRUEOF1) Release [Sep 11, 2015]

This is JasmineROM v6.1 release with support for MultiSystem, FlashFire, Safestrap, TWRP & Xposed... based on Lollipop 5.0 LRX21V.N900VVRUEOF1 firmware for VZW Samsung Galaxy Note 3 (SM-N900V). It's a regular flashable .ZIP file for both retail & developer editions to CLEAN FLASH via FlashFire, Safestrap, or TWRP (not recommended for retail users due to the lack of a rooting method if something went wrong, unless if coming from rooted KK 4.4.x or JB 4.3) or use the included IMG as a safe-to-flash/mod virtual ROM for MultiSystem.

Disclaimer:
You'll be vulnerable to ROOT LOSS if you'll just run the stock system. This may happen only if you applied a mod that causes bootloop or boot failure forcing you to restore FULL Stock/Unrooted Firmware via Odin. You can upgrade & apply safe mod's only or use MultiSystem to run 100% safe-to-mod virtual ROMs, which require microSD card. Otherwise, stay on KK 4.4.2 or JB 4.3 if you prefer!
XPOSED SUPPORT IS UNOFFICIAL & MAY CAUSE ISSUES OR BOOTLOOPS.
To recover from Xposed bootloop:
  • ENABLE USB debugging mode in settings
  • ENABLE SU during boot in SusperSU settings
  • DELETE Xposed conf file in ADB shell:
    Code:
    su
    rm /data/data/de.robv.android.xposed.installer/conf/modules.list
  • BACKUP your data/apps regularly
  • WIPE data (factory reset) in recovery ONLY IF NEEDED

ChangeLog:
  • Sagefright fix
  • Various bug fixes
  • Removed some apps
    +++
Changes in JasmineROM v6.0
  • Based on N900VVRUEOF1 LP
  • FlashFire/Safestrap/TWRP flashable ZIP
  • Virtual IMG for MultiSystem
  • Extended MultiSystem Support
  • Developer & Retail Editions on any Android OS
  • Stock
  • Clean
  • Rooted
  • Deodexed
  • Zipaligned
  • Busybox
  • SQLite3
  • rsync
  • OpenVPN
  • ZipAlign
  • Init.d Support
  • KNOX Removed
  • SELinux Utilities
  • Permissive SELinux
  • Xposed Support
  • Updated Xposed Framework
  • Updated Xposed Installer
  • Official System Status
  • Tether unlocked
  • Mitigated SELinux policy
  • Viper4Android Support
  • microSD write permissions fixed
  • TouchWiz Launcher Tweaks
  • Mod'd TouchWiz Launcher
  • TouchWiz Theme Chooser
  • 15 TouchWiz Themes
  • TouchWiz Backup
  • Smart Debloating
  • VZW OTA blocked
  • Amazon apps removed
  • Added Amazon Underground
  • Added PowerMenu app/widget
  • Added Terminal Emulator
  • Added TitaniumBackup
  • Added ES File Explorer
  • Added Viper4Android FX
  • Script to enable extra toggles
  • Flashlight Toggle
  • Floating Messages Toggle (long press to access settings!)
  • Camera Shutter Sound Menu enabled
  • Camera Default Storage sdcard
  • Native call recording enabled
  • Enabled Air Messaging
  • Enabled Scheduled Messaging
  • Enabled Messaging Black List
  • Unlimited Contact Linking
  • Disabled Software Updates
  • Enabled MultiWindow all apps
  • Added More Options & Tabs for Browser
  • Official System Status
  • Note 5 MyFiles Explorer
  • Note 5 Weather Widget (don't access settings if weather is sunny!)
  • Note 5 Media/Wallpapers/Sounds/Fonts
  • Android 6.0 Marshmallow Bootanimation
  • Much more tweaks (I don't remember everything)

Installation Instructions as Stock ROM:

FOR DEVELOPER EDITION:

DO NOT FLASH RETAIL FIRMWARE, IT WILL LOCK YOUR DEVICE !

Installation Instructions as Virtual ROM:
★ ★ ★ You should be on LP 5.0.x firmware with MultiSystem installed. ★ ★ ★​

  • BACKUP everything including your personal data in the internal storage
  • DOWNLOAD JasmineROM_v6.1_N900VVRUEOF1.zip & CHECK MD5
  • EXTRACT system.img to /MultiSystem/img/system - You may rename it!
  • OPEN MultiSystem APK
  • UPDATE Configurations to register the new IMG
  • ACTIVATE system.img as primary virtual IMG
  • REBOOT to recovery from MultiSystem reboot options
  • WIPE data (factory reset) is REQUIRED
  • REBOOT to system - BE PATIENT!
  • REINSTALL MultiSystem APK & update configurations/options
    Make sure that Virtual System is active & JasmineROM v6.0 is the Primary Virtual IMG!
    Code:
    VirtualSystem=Stock
    VirtualIMG=system.img
    system.img will change if you renamed the IMG (no spaces).
  • SETUP your settings & theme options
  • ENJOY

Extended Toggles:
To enable extended toggles including Flashlight & Floating Messages, run the following commands via Terminal Emulator or ADB shell after the 1st boot:
Code:
su
toggles
Note that the 1st command will request root access (grant it) & the 1nd command will reboot the devices after enabling the extended toggles.

Video Tutorials:

Downloads:

Please read carefully the instructions above before proceeding at you own risk!

JasmineROM v6.1 (N900VVRUEOF1) Release: JasmineROM_v6.1_N900VVRUEOF1.zip
md5: ffaf560948e5ad34ae383a5d98e9ef56

N900VVRUEOF1 Partial Firmware: N900VVRUEOF1_PartialFirmware.tar.md5.7z
md5: 1942fe8079b4e5b15d2abc06410ce041

N900VVRUEOF1 Kernel: N900VVRUEOF1_Kernel.tar.md5.7z
md5: 820edc70620679aafad9a2a58b52cae6

N900VVRUEOF1 Modem: N900VVRUEOF1_Modem.tar.md5.7z
md5: e87a22c3c22ed8c96ce9ee8f1f04e430

N900VVRUEOF1 Recovery: N900VVRUEOF1_Recovery.tar.md5.7z
md5: 230b94d34e61216cea18b22441aa4dc7

Lean Kernel for Verizon Note 3 LP: lk_hltevzw-v6.4.zip
md5: c065498208494a0d8f27578b0a116351

MultiSystem Thread: http://forum.xda-developers.com/android/software-hacking/tool-multirom-recovery-replacement-t3102395
If you read this, hit THANKS now :good::good::good: if you like it, buy me a coffee ;) :highfive: