Development [ROM][MIUI 21.12.8/13.0.4.0] EliteRom A12-Miui13 for POCO X3 Pro

Search This thread

pl1992aw

Senior Member
Apr 5, 2019
1,380
1,045
opps, I was formatdata then PC not connect Phone , how I copy rom to my phone ?
I think you encountered same problem as I and some people did.

Read here for solution from someone else:

You can find Orangefox recovery from here:

 

maekribas

Member
May 17, 2021
32
6
Another person with Brick phone?

Can you go into fastboot mode or recovery?

How much battery % backup did you last seen on your device?

When you connect to charger, does the notification led light up? Anything showing on the screen?
neither fastboot or recovery works,
battery 60%+
nothing shows on screen, but can be detected by miflash and can flash, problem is with EDL auth

i think the reason behind this is i didnt format before flashing my bad
 

pl1992aw

Senior Member
Apr 5, 2019
1,380
1,045
neither fastboot or recovery works,
battery 60%+
nothing shows on screen, but can be detected by miflash and can flash, problem is with EDL auth

i think the reason behind this is i didnt format before flashing my bad

Don't think didn't format data would brick the device this easily.

Developers might have encounter this problem as well. Try ask them how they revive their device.

Your device could have just stuck in the EDL mode. Try to exit it. Though I don't know the actual way to exit EDL since someone earlier told that pressing all 3 buttons together for a while doesn't work for him/her.

To exit EDL mode, the USB cable should be disconnected from your PC and your charger.

Similar to this thread
https://xdaforums.com/t/poco-x3-pro-hard-bricked.4277803/

Other device that quit EDL mode
https://xdaforums.com/t/cant-exit-edl-mode-op6t.3909138/post-80933577

1621320823549.png
 
Last edited:
  • Like
Reactions: pinkfloyd3

maekribas

Member
May 17, 2021
32
6
186491732_469527470970116_2008055888060854233_n.jpg
186553426_3401175413319114_2550987672266304801_n.jpg


Don't think didn't format data would brick the device this easily.

Developers might have encounter this problem as well. Try ask them how they revive their device.

Your device could have just stuck in the EDL mode. Try to exit it. Though I don't know the actual way to exit EDL since someone earlier told that pressing all 3 buttons together for a while doesn't work for him/her.

To exit EDL mode, the USB cable should be disconnected from your PC and your charger.

Similar to this thread
https://xdaforums.com/t/poco-x3-pro-hard-bricked.4277803/

Other device that quit EDL mode
https://xdaforums.com/t/cant-exit-edl-mode-op6t.3909138/post-80933577

View attachment 5312719
thanks for your efforts bro, my unit is now okay, i paid 30$ for the repair, thank you again.
 

Top Liked Posts