So, you're saying Magisk is a solution to a problem caused by SafetyNet which is causing my vendor image problem?
John
[ROM] Mokee MK81.0 Z2 Pro OFFICIAL NIGHTLY Release
- Thread starter mvp3
- Start date
John
It is not a problem . This popup window with this error exist on all roms with project treble . Just ignore it .
Attachments
Last edited:
Hi!
To fix this edit the file "build.prop" at /system and replace the line below:
ro.build.fingerprint=ZUK/z2_row/z2_row:8.0.0/OPR1.170623.032/3.5.259_180209:user/release-keys
With:
ro.build.fingerprint=ZUK/z2_row/z2_row:7.0/NRD90M/2.5.435_170525:user/release-keys
Save the file and reboot the device.
After that Magisk v16 - 16.3 will pass SafetyNet.
Check the attached SS.
Attachments
Latest update from today have full treble enabled.
Attachments
finally done , thanks for info
For root is required now Magisk-v16.3-factory-faizauthar12.zip
Last edited:
Thank you so much for your post! You saved my day, I was starting to be hopeless about rooting my device =)
Anyone using this rom? Does it pass safetynet with official Magisk?
Last edited:
If you want to pass SafetyNet with this Rom you need to use the Magisk module below:
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-simple-t3765199
E2001: Failed to update vendor image, ERROR 7
Last several nightlies won't install properly, aborts with E2001: Failed to update vendor image and goes to ERROR 7. Something been changed that affects this?
Thanks,
John
Last several nightlies won't install properly, aborts with E2001: Failed to update vendor image and goes to ERROR 7. Something been changed that affects this?
Thanks,
John
You need to use the factory2vendor.zip procedure, I have just done it and everything is good. Even the vendor image error on startup are fixed. Your phone will be deleted, at least mine was. Latest magisk16.4.zip works after installing in TWRP :good:
Last edited:
Okay, found references to the factory2vendor.zip procedure. So, set to factory defaults, installed factory2vendor.zip, reflashed TWRP 3.2.1-1. Then installed today's nightly with "failed to mount /vendor (invalid argument)" message.
So, did it all again. And got the same error message. Proceeded with latest Gapps, with error message again.
Phone appears to be working, currently restoring apps and settings from the "cloud". At least I no longer get that vendor image mismatch error anymore.
John
So, did it all again. And got the same error message. Proceeded with latest Gapps, with error message again.
Phone appears to be working, currently restoring apps and settings from the "cloud". At least I no longer get that vendor image mismatch error anymore.
John
Well, I appear to be screwed up again. Tried to clean up my Z2 Pro by wiping and reinstalling everything to eliminate final error message. Here's what I did following steps listed in several places for the Z2 Pro:Okay, found references to the factory2vendor.zip procedure. So, set to factory defaults, installed factory2vendor.zip, reflashed TWRP 3.2.1-1. Then installed today's nightly with "failed to mount /vendor (invalid argument)" message.
So, did it all again. And got the same error message. Proceeded with latest Gapps, with error message again.
Phone appears to be working, currently restoring apps and settings from the "cloud". At least I no longer get that vendor image mismatch error anymore.
John
For the latest Mokee 8.1
-full wipe
-flash factory2vendor.zip
-flash 3.2.1-1 twrp
-restart to recovery
-flash recent baseband
-install Mokee 8.1
-install Gapps
Get error "E2001: Failed to update vendor image." when installing Mokee ROM and the phone will not boot the system afterward. Tried flashing the vendor.img using TWRP to see if that might patch the problem but no joy. Phone is unusable.
John
---------- Post added at 04:05 AM ---------- Previous post was at 03:14 AM ----------
I apologize for the red herring, but I really screwed up my previous message. I wasn't installing factory2vendor.zip, I was installing vendor2factory.zip. Crap.
Anyway, I'm back to "Failed to mount "/vendor" (Invalid Argument)" during the installation of the ROM, but all seems to work just fine.
Sorry again for the mistake.
John
Last edited:
You need to start with twrp 3.2.1-0.img , flash factory2vendor.zip then flash twrp 3.2.1-1.img
---------- Post added at 07:08 PM ---------- Previous post was at 07:02 PM ----------
Sorry didn't completely read last post. Seems you have done the same procedure as I. The vendor message I also do get but everything is working
---------- Post added at 07:08 PM ---------- Previous post was at 07:02 PM ----------
Sorry didn't completely read last post. Seems you have done the same procedure as I. The vendor message I also do get but everything is working
Installed MK71.2-z2pro-181213-RELEASE and fullload-hot even not run anything, end task all and turnoff monitor didn't solve problem
If you have an encrypted phone and want to install Mokee (or any other ROM), you have a problem. Yes: TWRP 3.3.1-0 can unlock those partitions for you, but you cannot transfer files over usb using mtp or adb sideload. When inside TWRP 3.3.1-0, the device isn't recognized by Windows nor Linux.
So in order flash Mokee in a clean fashion, wiping everything, you need to wipe data/cache/dalvik/system etc with 3.3.1-0.
Then boot the phone in fastboot mode and flash TWRP 3.2.3-1: the device is now recognized by your computer. You transfer everything you need (ROM, opengapps, magisk, ...) and install it.
When your setup is ready, up to you to flash TWRP 3.3.1-0 again if you want support for phone full encryption. If not, better say with 3.2.3-1.
So in order flash Mokee in a clean fashion, wiping everything, you need to wipe data/cache/dalvik/system etc with 3.3.1-0.
Then boot the phone in fastboot mode and flash TWRP 3.2.3-1: the device is now recognized by your computer. You transfer everything you need (ROM, opengapps, magisk, ...) and install it.
When your setup is ready, up to you to flash TWRP 3.3.1-0 again if you want support for phone full encryption. If not, better say with 3.2.3-1.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone