[ROM][MorfuZ V3.6][GT]EMUI 8.0 Kangvip Mate 10 Lite by Catuva21

Search This thread

CATUVA21

Senior Member
Jul 7, 2017
208
356
MORFUZ%2BM10LITE.jpg
V 3.6 - EMUI 8.0 RNE_E8_330_Kvip_V2
DONOT COPY MY WORK, Ask for Permissions
Code:
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps 
- loser warranty
- if you are not sure better not to touch and leave this page
COMPATIBLE WITH
with all versions, Mate 10 lite, remember to know your original compilation if at any time you want to return to stock for example RNE-LX3C25 with this data you can return to stock.
acerde%2Bde.jpg

This version is based on the official EMUI modification made in the SIRIUZ rom combined with the work of Kangvip KangV & Team HRT for their best KangVIP framework, an Asian rom which was adapted for all European and Latin American versions.
REQUIREMENTS:
  • - EMUI 8.0.0
  • - Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
  • - unlock the bootloader.
  • - install the recovery that I will leave, automated from windows-linux
intrucciones.jpg

  • Guard the rom in an external memory.
  • Turn off the cell phone press the plus and power buttons until you have the TWRP window
  • Press WIPE
  • Press FORMAT DATA
  • Write the word "yes" without quotes and accept, just do the work
  • Press BACK to go back several times to the main window.
  • Press WIPE, then ADVANCE WIPE
  • Verify that the partition DATA this in the f2fs extension
  • Mark: Dalvik, cache, data, internal storage, system
  • IMPORTANT !: do not mark "micro sdcard".
  • Once you have marked, slide the "swipe to wipe" arrow to clear it.
  • Go back to the main sale, press INSTALL
  • Press SELECT STORAGE
  • Switch to Micro SDCard to find the rom.
  • Look for the MORFUZ rom and flash
  • At the end of the installation press "wipe davilk-cache", wait for it to finish.
  • Reboot system.
  • Congratulations now will start the rom MORFUZ
root%2Bmagisk.jpg

now compatible with magisk, if you want to have a magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file by recovery twrp after starting, delete the supersu application.
https://mega.nz/#!5EBlWQDJ!5Sodz7OcUGHulZ7-4rcLW2OlK7sDHDoIC7h_66yX760
fix.jpg

It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
https://mega.nz/#!s3oFgCIK!IFGxeV1UYEDjMGjFzdGR9N5Cx1bVVcqbk-XeRDmQj5Q
download.jpg

Rom Morfuz
https://mega.nz/#!tMpUnSYS!hgLDk0Hq4deAjJSJ9lHNRBdW_Zsx_3EFMv87s8eashw
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ

TELEGRAM GROUP
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg

Contributors:
CATUVA21

Credits:
- Openkirin Recovery TWRP
- KangV & Team HRT for their best KangVIP framework
- Alexxx1
- Chisetdel31260

ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0

Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-06-02
 

Attachments

  • IMG_20180501_221344.jpg
    IMG_20180501_221344.jpg
    161.2 KB · Views: 15,260
  • Screenshot_20180501-204000.jpg
    Screenshot_20180501-204000.jpg
    153 KB · Views: 14,939
  • Screenshot_20180501-204005.jpg
    Screenshot_20180501-204005.jpg
    129.8 KB · Views: 14,081
  • Screenshot_20180501-203952.jpg
    Screenshot_20180501-203952.jpg
    223.7 KB · Views: 14,684
  • Screenshot_20180501-204012.jpg
    Screenshot_20180501-204012.jpg
    237.2 KB · Views: 13,334
  • Screenshot_20180501-204026.jpg
    Screenshot_20180501-204026.jpg
    136.3 KB · Views: 12,958
  • Screenshot_20180501-204031.jpg
    Screenshot_20180501-204031.jpg
    244.2 KB · Views: 12,605
  • Screenshot_20180501-204057.jpg
    Screenshot_20180501-204057.jpg
    252.4 KB · Views: 12,195
  • Screenshot_20180501-224416.jpg
    Screenshot_20180501-224416.jpg
    247 KB · Views: 11,851
  • 13.jpg
    13.jpg
    10.1 KB · Views: 8,054
  • 12.jpg
    12.jpg
    12.8 KB · Views: 10,155
  • 11.jpg
    11.jpg
    84.3 KB · Views: 10,306
  • 10.jpg
    10.jpg
    20.6 KB · Views: 10,508
  • 14.jpg
    14.jpg
    10.4 KB · Views: 8,410
Last edited:

CATUVA21

Senior Member
Jul 7, 2017
208
356
DESCRIPTION ROM MORFUZ - KANGVIP
DETAILS OF THE ROM
ROM MORFUZ 3.6
- Mate10 lite base firmware (August security patch).
- New base RNE.356GT.
- MorfuzKernel 2.1 selinux Permissive.
- Turbo GPU.
- Dual speaker activated.
- Added support init.d.
- Added busybox.
- Huawei ID back.
- Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
- Change of the MTweaks auditor kernel application.
- Added Lent AR fun camera function.
- Magisk 16.0.
- Increase bitrate of photos and video, improve quality.
- Application of return mails.
- Youtube Mod Updated.
- Screenshot by sliding three fingers.
- New Gboard keyboard.


ROM MORFUZ 3.4
-Base firmware Mate 10 lite(security patch May).
-New kangvip base RNE_E8_330_Kvip_V2.
-Activated Dual Speaker.
-Added DolbyAtmos in Music.
-New Boot logo.
-Added custom watermark for the Mate 10 lite.
-Now without patches.
-Installation mode AROMA-INSTALLER.
-Music: stock or crack.
-Camera: stock, Mate10Pro or P20Pro.
-Root: Magisk or Supersu.
-Navbar, Use the fingerprint sensor as a navigation bar.
-Solid explorer, Kernel Auditor, Quick Reboot.
-MxPlayer.
-Sony Music.


ROM MORFUZ 2.0
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office


BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications
 
Last edited:

CATUVA21

Senior Member
Jul 7, 2017
208
356
Removed
 

Attachments

  • Screenshot_2018-05-01-22-47-56.png
    Screenshot_2018-05-01-22-47-56.png
    48.2 KB · Views: 2,925
  • Screenshot_2018-05-01-22-47-52.png
    Screenshot_2018-05-01-22-47-52.png
    83.4 KB · Views: 3,274
  • Screenshot_2018-05-01-22-47-45.png
    Screenshot_2018-05-01-22-47-45.png
    72 KB · Views: 3,257
  • Screenshot_2018-05-01-22-47-42.png
    Screenshot_2018-05-01-22-47-42.png
    119.1 KB · Views: 3,276
Last edited by a moderator:

gmbengue

Senior Member
Jan 26, 2010
80
13
Thank's for the rom @CATUVA21, I'll try it today.
Can you try to put viper4android in your next release ? No sound mod work with our emui 8 !
 

Jackz1922

Member
Jun 15, 2015
16
1
Bro can i install xposed framework in this rom? If no, Please make suport for it
 
Last edited by a moderator:

darckblis

Member
Oct 17, 2016
12
0
i dnt get the additional sitting of the rom!
 

Attachments

  • IMG_20180502_191629.jpg
    IMG_20180502_191629.jpg
    197.9 KB · Views: 2,102
  • Screenshot_20180502-191608.jpg
    Screenshot_20180502-191608.jpg
    149.3 KB · Views: 2,092

huyle8795

Member
Mar 17, 2018
8
0
ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIP
HUAWEI MATE 10 LITE
KANGVIP P10.342-V3​
DONOT COPY MY WORK, Ask for Permissions
Code:
 - 
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps 
- loser warranty
- if you are not sure better not to touch and leave this page

COMPATIBLE WITH
  • L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
  • L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
  • L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
  • - be in EMUI 8.0.0 Mate 10 Lite
  • - Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
  • - unlock the bootloader.
  • - install the recovery that I will leave, automated from windows-linux

DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office

BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications


INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ



Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0

Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02

Images

Thank you so much. But i can't install Recovery, it said: Failed (remote: partition length get error). Can u help me?
 

gaduarte7

Member
May 1, 2018
45
14
44
Bogota
Thank you

ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIP
HUAWEI MATE 10 LITE
KANGVIP P10.342-V3​
DONOT COPY MY WORK, Ask for Permissions
Code:
 - 
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps 
- loser warranty
- if you are not sure better not to touch and leave this page

COMPATIBLE WITH
  • L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
  • L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
  • L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
  • - be in EMUI 8.0.0 Mate 10 Lite
  • - Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
  • - unlock the bootloader.
  • - install the recovery that I will leave, automated from windows-linux

DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office

BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications


INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ



Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0

Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02

Images


Good afternoon, thank you very much for your contribution.
I had installed another room; but it did not appear the option to turn on the screen when receiving a message, and, they recommended the firmware with the L21C432 compilation, and, since I saw that catuva21 collaborated in its development, it installed it and everything works wonderfully.

Thank you very much.

The only thing is that I do not see the K settings, but I'm fine.

Greetings.

---------- Post added at 08:15 PM ---------- Previous post was at 08:02 PM ----------

ROM MORFUZ V 2.0 - EMUI 8.0 KANGVIP
HUAWEI MATE 10 LITE
KANGVIP P10.342-V3​
DONOT COPY MY WORK, Ask for Permissions
Code:
 - 
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps 
- loser warranty
- if you are not sure better not to touch and leave this page

COMPATIBLE WITH
  • L23C605---L03C605---L21C432---L01C432---L21C900---L01C900---L02C636
  • L22C636---AL00C00---L21C10---L21C33---L21C185---L01C55
  • L21C738---L22C569---L22C635---L22C675---L03C178---L02C346
REQUIREMENTS:
  • - be in EMUI 8.0.0 Mate 10 Lite
  • - Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
  • - unlock the bootloader.
  • - install the recovery that I will leave, automated from windows-linux

DETAILS OF THE ROM
- is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- It eliminated unnecessary google applications.
- Added unlocking facial, works 100%
- Added Sound with Huawei Histen effect
- Added Call Recorder
- Added Youtube Mod (function in the background)
- Added Musica huawei Crack
- activated multi-user X5
- effect camera 3D
- Lents AR
- keyboard change, google
- reduction of size of icons
- activated glove mode
- Mtu 1500
- explored files improved
- Added main screen design 5x5,5x6,6x5
- Added more applications of social networks of Twin cloning
. * facebook, faceboot lite
. * messenger, messenger lite
. * whatsapp, whatsapp mod
. * instagram
. * snapchat
. * telegram
. * twitter
. * mega
. * creativefrends
. * microsoft office

BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications


INSTALLATION MODE:
- guard the rom in an external memory.
- install the recovery twrp that is in the second post
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE, then ADVANCE WIPE
- mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- do not perform reboot system.
- Now go back to the main panel.
- press reboot, then bootloader and the cell will restart in fastboot mode.
- connect the cell phone to the computer with the data cable.
- now run the automated file to flash the kernel and ramdisk.
- congratulations now will start the rom MORFUZ



Contributors:
CATUVA21
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C432 (8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0

Version Information:
Status: Stable
Created on: 2018-05-02
Last Updated on: 2018-05-02

Images

Question, with this firmware, can I install the stock recovery, and, close the bootloader?

Thank you.
 

CATUVA21

Senior Member
Jul 7, 2017
208
356
Good afternoon, thank you very much for your contribution.
I had installed another room; but it did not appear the option to turn on the screen when receiving a message, and, they recommended the firmware with the L21C432 compilation, and, since I saw that catuva21 collaborated in its development, it installed it and everything works wonderfully.

Thank you very much.

The only thing is that I do not see the K settings, but I'm fine.

Greetings.

---------- Post added at 08:15 PM ---------- Previous post was at 08:02 PM ----------



Question, with this firmware, can I install the stock recovery, and, close the bootloader?

Thank you.


is a modified rom, I do not recommend closing the bootloader, only for stock roms
 

gaduarte7

Member
May 1, 2018
45
14
44
Bogota
is a modified rom, I do not recommend closing the bootloader, only for stock roms

Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.

Experience lived and I hope you do not do something that developers do not advise.


Grcias and happy day.
 

CATUVA21

Senior Member
Jul 7, 2017
208
356
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.

Experience lived and I hope you do not do something that developers do not advise.


Grcias and happy day.


Thanks for your contribution, it is true that the developers advise not to take certain steps because they have already been the same, and communicates to prevent others from making those mistakes.
 
  • Like
Reactions: gaduarte7

Top Liked Posts

  • There are no posts matching your filters.
  • 13
    MORFUZ%2BM10LITE.jpg
    V 3.6 - EMUI 8.0 RNE_E8_330_Kvip_V2
    DONOT COPY MY WORK, Ask for Permissions
    Code:
    - I am not responsible for the damage of your cell phone if you do not correctly perform the steps 
    - loser warranty
    - if you are not sure better not to touch and leave this page
    COMPATIBLE WITH
    with all versions, Mate 10 lite, remember to know your original compilation if at any time you want to return to stock for example RNE-LX3C25 with this data you can return to stock.
    acerde%2Bde.jpg

    This version is based on the official EMUI modification made in the SIRIUZ rom combined with the work of Kangvip KangV & Team HRT for their best KangVIP framework, an Asian rom which was adapted for all European and Latin American versions.
    REQUIREMENTS:
    • - EMUI 8.0.0
    • - Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
    • - unlock the bootloader.
    • - install the recovery that I will leave, automated from windows-linux
    intrucciones.jpg

    • Guard the rom in an external memory.
    • Turn off the cell phone press the plus and power buttons until you have the TWRP window
    • Press WIPE
    • Press FORMAT DATA
    • Write the word "yes" without quotes and accept, just do the work
    • Press BACK to go back several times to the main window.
    • Press WIPE, then ADVANCE WIPE
    • Verify that the partition DATA this in the f2fs extension
    • Mark: Dalvik, cache, data, internal storage, system
    • IMPORTANT !: do not mark "micro sdcard".
    • Once you have marked, slide the "swipe to wipe" arrow to clear it.
    • Go back to the main sale, press INSTALL
    • Press SELECT STORAGE
    • Switch to Micro SDCard to find the rom.
    • Look for the MORFUZ rom and flash
    • At the end of the installation press "wipe davilk-cache", wait for it to finish.
    • Reboot system.
    • Congratulations now will start the rom MORFUZ
    root%2Bmagisk.jpg

    now compatible with magisk, if you want to have a magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file by recovery twrp after starting, delete the supersu application.
    https://mega.nz/#!5EBlWQDJ!5Sodz7OcUGHulZ7-4rcLW2OlK7sDHDoIC7h_66yX760
    fix.jpg

    It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
    -IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
    https://mega.nz/#!s3oFgCIK!IFGxeV1UYEDjMGjFzdGR9N5Cx1bVVcqbk-XeRDmQj5Q
    download.jpg

    Rom Morfuz
    https://mega.nz/#!tMpUnSYS!hgLDk0Hq4deAjJSJ9lHNRBdW_Zsx_3EFMv87s8eashw
    TWRP Mod by catuva21 - VERSION 2
    unzip, the file is automatic
    https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ

    TELEGRAM GROUP
    https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg

    Contributors:
    CATUVA21

    Credits:
    - Openkirin Recovery TWRP
    - KangV & Team HRT for their best KangVIP framework
    - Alexxx1
    - Chisetdel31260

    ROM OS Version: RNE-L21C432 (8.0.0)
    ROM Kernel: Stock
    ROM Firmware Required: EMUI 8.0.0

    Version Information:
    Status: Stable
    Created on: 2018-05-02
    Last Updated on: 2018-06-02
    9
    DESCRIPTION ROM MORFUZ - KANGVIP
    DETAILS OF THE ROM
    ROM MORFUZ 3.6
    - Mate10 lite base firmware (August security patch).
    - New base RNE.356GT.
    - MorfuzKernel 2.1 selinux Permissive.
    - Turbo GPU.
    - Dual speaker activated.
    - Added support init.d.
    - Added busybox.
    - Huawei ID back.
    - Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
    - Change of the MTweaks auditor kernel application.
    - Added Lent AR fun camera function.
    - Magisk 16.0.
    - Increase bitrate of photos and video, improve quality.
    - Application of return mails.
    - Youtube Mod Updated.
    - Screenshot by sliding three fingers.
    - New Gboard keyboard.


    ROM MORFUZ 3.4
    -Base firmware Mate 10 lite(security patch May).
    -New kangvip base RNE_E8_330_Kvip_V2.
    -Activated Dual Speaker.
    -Added DolbyAtmos in Music.
    -New Boot logo.
    -Added custom watermark for the Mate 10 lite.
    -Now without patches.
    -Installation mode AROMA-INSTALLER.
    -Music: stock or crack.
    -Camera: stock, Mate10Pro or P20Pro.
    -Root: Magisk or Supersu.
    -Navbar, Use the fingerprint sensor as a navigation bar.
    -Solid explorer, Kernel Auditor, Quick Reboot.
    -MxPlayer.
    -Sony Music.


    ROM MORFUZ 2.0
    - is based on the last update of RNE-L21C432 (8.0.0) and kangvip P10.342-V2 (security patch April)
    - eliminated the data space.
    - Deodexed (improves optimization)
    - Improvements in the quality of photos, video and sound.
    - It eliminated unnecessary google applications.
    - Added unlocking facial, works 100%
    - Added Sound with Huawei Histen effect
    - Added Call Recorder
    - Added Youtube Mod (function in the background)
    - Added Musica huawei Crack
    - activated multi-user X5
    - effect camera 3D
    - Lents AR
    - keyboard change, google
    - reduction of size of icons
    - activated glove mode
    - Mtu 1500
    - explored files improved
    - Added main screen design 5x5,5x6,6x5
    - Added more applications of social networks of Twin cloning
    . * facebook, faceboot lite
    . * messenger, messenger lite
    . * whatsapp, whatsapp mod
    . * instagram
    . * snapchat
    . * telegram
    . * twitter
    . * mega
    . * creativefrends
    . * microsoft office


    BENEFITS OF KANGVIP
    - modification of battery icon
    - Display cpu battery temperature
    - status bar clock
    - show time, week
    - navigattion bar setting
    - power key
    - tune CPU GPU
    - desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
    - tune DPI
    - mipop setting.
    - and many more modifications
    6
    4G works very well, but if you changed the brand (cust) probably not

    4G is working very well here also with changed brand.

    @CATUVA21 I installed this Rom for a friend of mine on his Mate 10 Lite. The previous Firmware was RNE-L21C432 - Android 7.
    I rebranded from c432 to c185 on Android 7 (because Oreo c432 firmware did not match the device)
    I flashed c185 oeminfo from here: [url]https://forum.xda-developers.com/mate-10/huawei-mate-10-lite--roms-kernels-recoveries--other-development/oeminfo-collection-t3762385[/URL]

    I flashed immediately after the only existing Full Firmware for Nougat c185 from here with dload method: [url]https://forum.xda-developers.com/mate-10/huawei-mate-10-lite--roms-kernels-recoveries--other-development/stock-rom-rne-l21c185b142-t3764065[/URL]

    After I did the update to Oreo with your HWOTA-Tool from Post #3 - (downloaded the FullOTA-MF zips from DeveloperMT Website for RNE-L21C185B310 8.0.0.310) Then I flashed with your TWRP from Post # 2 your ROM

    Your ROM comes already with SuperSU Root after installation (without flashing SuperSU from #2) The ramdisk contains in /sbin the two files: kvip and load_boot.
    I just had to install the provided apk by KangV to manage full Root Permission (attached)

    Magisk does not working properly.
    I tried it, because the owner of this phone likes Magisk more than SuperSU. I uninstalled the KangV SuperSU apk (because unroot is not possible, Root is already in ramdisk)
    I flashed Magisk v16, it was possible. But Magisk Manager said after some reboots: Magisk is not installed…. I installed a simple module and it gives me a bootloop…. Cts and basicIntegrity = false

    But worst of all, OEM unlock was turned off and grayed out. Now I understand what you mean in post #2 “deactivate the OEM”
    It was not possible to flash Magisk Uninstaller. And it was not possible to restore TWRP Backup. I did, but then phone could not start. Reflashing the Rom did not work. I ended up in Fastboot Mode and eRecovery… lol :)

    It was a bit difficult to come back to Stock Firmware, to restore the phone. Finally I did it with the trick by eRecovery (changing the DNS in Router and register an update by DeveloperMT)
    Flashed Rom again, this time just installed the SuperSU apk after.
    Tried to flash different Viper4Adroid Mods as well as Dolby Atmos Mods – but the known problem is that they are not working on Huawei EMUI 8. (found none)

    I think it is a pity that your TWRP is not working properly. (I did not format data - only wipe like mentioned in OP)
    It is not possible to make a Nandroid Backup on external storage (permission denied) – TWRP Backup can only stored on internal storage and without data partition. if data is included, the backup will be aborted – made some recovery logs (attached).

    Many Mods in your ROM are amazing. :cool:

    Only the issues with TWRP make some things difficult.
    BTW: I tried three other TWRPs – (AzanMughal, KingOfMezi) but only TWRP by Pretoriano80 is nearly good on Custom Rom too, but have issues with system mount/unmount and of course with data, because of the modified /vendor/etc/ fstab.hi6250 and may because of some other changes.
    So, it is not useful for your Rom at this time!
    On Stock Firmware this alternative TWRP works like a charm with full encryption/decryption support.
    It is made for P10 Lite, but working also on Mate 10 Lite.
    [url]https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447[/URL]

    Many thanks for your work :good:


    Information for Users:
    For updating from Nougat to Oreo I find the HWOTA Tool from post # 3 by @CATUVA21 pretty good:
    [url]https://forum.xda-developers.com/showpost.php?p=76397636&postcount=3[/URL]

    I updated with this. I just copied the 3 oreo firmware zips (which matches the device) in the HWOTA folder on external SD, renamed it and flashed the OTA_catuva21 zip
    The firmware can be found on: [url]http://pro-teammt.ru/firmware-database/?firmware_model=RNE&firmware_page=0[/URL]
    You can add to RNE- (your cust RNE-L21 for example – it is important, because the firmware must match your device and cust) and search for FullOTA-MF (it works only with this).
    Click on: filelist – wait until a new window appears and you have the download Links.

    For going back from MORFUZ 2.0 ROM back to Stock Firmware I prefer to use HuRUpdater v 0.3:
    https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
    It works like a charm.
    The HWOTA Method mentioned in post #39 did not the job for me….
    2
    Bundle of thanks for frp unlock patch but plz tell if i flash this, will FLASHING it automatically factory reset my phone or not. I would want to save my data if it does. HUGE THANKS AGAIN.

    It does not factory reset, it just turn the frp locked to frp unlocked in the bootloader :D