[ROM][MorfuZ V4.0][GT] EMUI 8.0 Kangvip P20 Lite by Catuva21

Search This thread

kaiosama93

Member
Oct 31, 2016
17
3
Do you have the zip file? Cuz in stock rom i tried to install and got stuck in boot loop


No need for the zip file, Xposed you need to install it via K Settings, More settings, Xposed settings, and select Enable.
If I remember correctly the restart of the device has been multiple until everything went smoothly like the oil :)

I'm talking about the custom rom, not the stock rom. Let's be clear xD
As for the bootloop, you can try to perform these steps on this website https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial ..
I hope I have been of help.
 
Last edited:
  • Like
Reactions: haidermiz

haidermiz

Senior Member
Jun 18, 2016
145
3
No need for the zip file, Xposed you need to install it via K Settings, More settings, Xposed settings, and select Enable.
If I remember correctly the restart of the device has been multiple until everything went smoothly like the oil :)

I'm talking about the custom rom, not the stock rom. Let's be clear xD
As for the bootloop, you can try to perform these steps on this website https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial ..
I hope I have been of help.
Going to install it now thanks
 

kaiosama93

Member
Oct 31, 2016
17
3
When i enter ussd code it says connection problem or invalid mmi code. Can it be fixed?


I do not know why, it depends on the type of procedure you have done in the past .. Anyway looking for a bit on the internet I found this link .. You could try to see if these steps work. https://www.technobezz.com/how-to-fix-invalid-mmi-code-error-on-huawei-phone/
If they do not work, try to format everything, including the internal memory and data, writing "yes", reinstalling the custom rom, and at the end of the installation do swipe cache and dalvin .. at the end reboot the device. ;)

---------- Post added at 01:59 AM ---------- Previous post was at 01:46 AM ----------

When I'm trying to install from recovery it says zip file is corrupt? i don't know what's the problem
https://mega.nz/index.html#!xr4y1CRQ...G2FRO6p-aaVMCE
am i flashing right file?

The file is correct, you should do the complete formatting from recovery, following these simple steps:
1- Swipe cache, dalvin, system, data, internal storage.
2- Format data, write "yes".
3- Install the custom rom.
4- Swipe cache and dalvin.
5- Restart the system.
6- Wait for the various restarts if necessary.

If this does not work, I suggest you do this:
1- Enter recovery mode
2- Advanced, Repair contexts, swipe.
3- Perform the above procedure again.

1- Swipe cache, dalvin, system, data, internal storage.
2- Format data, write "yes".
3- Install the custom rom.
4- Swipe cache and dalvin.
5- Restart the system.
6- Wait for the various restarts if necessary.

Let me know how it goes.
 
Last edited:

haidermiz

Senior Member
Jun 18, 2016
145
3
I do not know why, it depends on the type of procedure you have done in the past .. Anyway looking for a bit on the internet I found this link .. You could try to see if these steps work. https://www.technobezz.com/how-to-fix-invalid-mmi-code-error-on-huawei-phone/
If they do not work, try to format everything, including the internal memory and data, writing "yes", reinstalling the custom rom, and at the end of the installation do swipe cache and dalvin .. at the end reboot the device. ;)

---------- Post added at 01:59 AM ---------- Previous post was at 01:46 AM ----------



The file is correct, you should do the complete formatting from recovery, following these simple steps:
1- Swipe cache, dalvin, system, data, internal storage.
2- Format data, write "yes".
3- Install the custom rom.
4- Swipe cache and dalvin.
5- Restart the system.
6- Wait for the various restarts if necessary.

If this does not work, I suggest you do this:
1- Enter recovery mode
2- Advanced, Repair contexts, swipe.
3- Perform the above procedure again.

1- Swipe cache, dalvin, system, data, internal storage.
2- Format data, write "yes".
3- Install the custom rom.
4- Swipe cache and dalvin.
5- Restart the system.
6- Wait for the various restarts if necessary.

Let me know how it goes.
my device is ANE-LX1 i don't know why it says corrupt zip file i did everything you said i formatted data advanced wipe everything then repaired context then tried to install it says corrupt zip file i don't know what's the problem
 

luk9a12

Member
Dec 22, 2012
5
0
Sarajevo
I do not know why, it depends on the type of procedure you have done in the past .. Anyway looking for a bit on the internet I found this link .. You could try to see if these steps work. https://www.technobezz.com/how-to-fi...-huawei-phone/
If they do not work, try to format everything, including the internal memory and data, writing "yes", reinstalling the custom rom, and at the end of the installation do swipe cache and dalvin .. at the end reboot the device.
Cant do what is on the Web site because *#*#4636#*#* isn't working and can't boot in to safe mode.
 
A

Aklenz07

Guest
my device is ANE-LX1 i don't know why it says corrupt zip file i did everything you said i formatted data advanced wipe everything then repaired context then tried to install it says corrupt zip file i don't know what's the problem
Try re-downloading the file
 

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    MORFUZ%2BP20L.jpg
    V 4.0 - EMUI 8.0 ANE_165GT_Kangvip
    DONOT COPY MY WORK, Ask for Permissions
    Code:
    - I am not responsible for the damage of your cell phone if you do not correctly perform the steps 
    - loser warranty
    - if you are not sure better not to touch and leave this page
    COMPATIBLE WITH
    with all versions, P20 lite, remember to know your original compilation if at any time you want to return to stock for example ANE-LX3C25 with this data you can return to stock.
    acerde%2Bde.jpg

    This version is based on the official EMUI modification made in the SIRIUZ rom combined with the work of Kangvip KangV & Team HRT for their best KangVIP framework, an Asian rom which was adapted for all European and Latin American versions.
    REQUIREMENTS:
    • - EMUI 8.0.0
    • - Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
    • - unlock the bootloader.
    • - install the recovery that I will leave, automated from windows-linux
    intrucciones.jpg

    • Guard the rom in an external memory.
    • Turn off the cell phone press the plus and power buttons until you have the TWRP window
    • Press WIPE
    • Press FORMAT DATA
    • Write the word "yes" without quotes and accept, just do the work
    • Press BACK to go back several times to the main window.
    • Press WIPE, then ADVANCE WIPE
    • Verify that the partition DATA this in the f2fs extension
    • Mark: Dalvik, cache, data, internal storage, system
    • IMPORTANT !: do not mark "micro sdcard".
    • Once you have marked, slide the "swipe to wipe" arrow to clear it.
    • Go back to the main sale, press INSTALL
    • Press SELECT STORAGE
    • Switch to Micro SDCard to find the rom.
    • Look for the MORFUZ rom and flash
    • At the end of the installation press "wipe davilk-cache", wait for it to finish.
    • Reboot system.
    • Congratulations now will start the rom MORFUZ
    root%2Bmagisk.jpg

    now compatible with magisk, if you want to have a magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file by recovery twrp after starting, delete the supersu application.
    https://mega.nz/#!AYoXGCpD!Kkd5o3HEc9VyYYUnlM38RuRb58_MJttaVMvGgg-x9Co
    fix.jpg

    It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
    -IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
    https://mega.nz/#!F7oXzSRZ!8uuSCIx4UTbuWkTEYoFmTXTCwvIr6Reuc1vyq6OIhw0
    download.jpg

    Rom Morfuz
    https://mega.nz/#!hcA3TIRT!FFn6i28sFuY4KoXvvJeflbFcqLv-h9Q_gjp6nGZSDXE
    TWRP Mod by catuva21 - VERSION 2
    unzip, the file is automatic
    https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ

    TELEGRAM GROUP
    https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg

    Contributors:
    CATUVA21

    Credits:
    - Openkirin Recovery TWRP
    - KangV & Team HRT for their best KangVIP framework
    - Alexxx1
    - Chisetdel31260

    ROM OS Version: ANE-LXX(8.0.0)
    ROM Kernel: Stock
    ROM Firmware Required: EMUI 8.0.0

    Version Information:
    Status: Stable
    Created on: 2018-07-07
    Last Updated on: 2018-09-10
    5
    DESCRIPTION ROM MORFUZ - KANGVIP
    DETAILS OF THE ROM
    ROM MORFUZ 4.0
    - Firmware base P20 lite (security patch of setimbre).
    - New base kangvip ANE_165GT_Kangvip.
    - MorfuzKernel 2.1 Selinux Permissive.
    - GPU Turbo.
    - Optional activated dual speaker.
    - New Boot logo.
    - Huawei ID integrated and running.
    - New bootanimation.
    - New bootlogo.
    - Percentage activated from start, for other models.
    - Activated the font change in themes.
    - new topics.
    - 7 themes to change the font customization.
    - Added support init.d.
    - Added busybox.
    - Boot profile for the Darknnes-Blu_Active kernel within init.d improves performance.
    - Change of the MTweaks auditor kernel application.
    - Added Lent AR fun camera function.
    - Magisk 16.4.
    - Increase bitRate of photos and video, improve quality.
    - Application of return mail.
    - Youtube Mod Updated.
    - New Gboard keyboard.
    - Adaway ad blocker.
    - VolTe Activated.


    ROM MORFUZ 3.4
    -Base firmware P20 lite(security patch Jun).
    -New kangvip base ANE_151_Kvip.
    -Activated Dual Speaker.
    -Added DolbyAtmos in Music.
    -New Boot logo.
    -Added custom watermark for the P20 lite.
    -Now without patches.
    -Installation mode AROMA-INSTALLER.
    -Music: stock or crack.
    -Camera: stock, Mate10Pro or P20Pro.
    -Root: Supersu.
    -Navbar, Use the fingerprint sensor as a navigation bar.
    -Solid explorer, Kernel Auditor, Quick Reboot.
    -MxPlayer.
    -Sony Music.
    -Eliminated the data space.
    -Deodexed (improves optimization).
    -Improvements in the quality of photos, video and sound..
    -It eliminated unnecessary google applications.
    -Added Call Recorder.
    -Added Youtube Mod (function in the background).
    -Added Musica huawei Crack.
    -Activated multi-user X5.
    -Keyboard change, google.
    -Reduction of size of icons.
    -Activated glove mode.
    -Mtu 1500.
    -Explored files improved.
    -Added main screen design 4x5,6x5.
    -Added more applications of social networks of Twin cloning.
    . * facebook, faceboot lite
    . * messenger, messenger lite
    . * whatsapp, whatsapp mod
    . * instagram
    . * snapchat
    . * telegram
    . * twitter
    . * mega
    . * creativefrends
    . * microsoft office



    BENEFITS OF KANGVIP
    - modification of battery icon
    - Display cpu battery temperature
    - status bar clock
    - show time, week
    - navigattion bar setting
    - power key
    - tune CPU GPU
    - desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
    - tune DPI
    - mipop setting.
    - and many more modifications
    2
    Currently testing it. Right now l.. ill give a feedbacms immedietly
    1
    I've got to say, I really like the rom, super stable and works well, what I do have a problem with is the $30 VIP version of "k settings" I mean come on bro, it's not like u wrote the code urself, I understand time isn't free, but $30 is a bit steep to pay for premium rom features, features that most custom rom devs include free, features that I helped implement years ago, smh.... Other than that, great rom...