[ROM][MorfuZ V4.0][GT] EMUI 8.0 Kangvip P20 Lite by Catuva21
- Thread starter CATUVA21
- Start date
Magisk had nothing to do with it. the problem immediately after installing the mod. A default in the fashion of the super powers set. But it doesn't matter because the problem is solved. Thank You for Your work
How to pass Safety Net and run Google Pay
How is it possible to use Google Pay and pass Safety Net. I have installed Magisk 16.4
Does anyone have google pay with this ROM running?
EDIT:
The following steps worked for me, but not with MorFuz V4.0
• make a eRecovery, manufacturer ROM download and installed
• boot and setup Android welcome
• enable under Developer Settings -> "Allow OEM install"
• turn off phone
• Boot in fastboot: (press Vol- and connect USB cable, phone boots alone)
• Install TWRP "Autoinstall TWRP321_OREO_P20LITE" via batch file
RECOVERY TWRP Mod by catuva21
unzip, the file is automatic
https://mega.nz/#!0jwk1ArQ!4bHAlsDj9...QJv3IVXl51oOtI
• turn off the phone
• Boot in Recovery: Vol + and POWER, TWRP starts
• Install Magisk v16.4.zip
Magisk V16.4 https://drive.google.com/file/d/1E1k...V0MMnRmVa/view
• reboot
• Check Safetynet status = OK (maybe an error, that can not read information), but still works!
• Install Google App and Google Pay
• Enable Magisk Hide Google and Google Pay
Then Google Pay works with rooted P20 lite phone
How is it possible to use Google Pay and pass Safety Net. I have installed Magisk 16.4
Does anyone have google pay with this ROM running?
EDIT:
The following steps worked for me, but not with MorFuz V4.0
• make a eRecovery, manufacturer ROM download and installed
• boot and setup Android welcome
• enable under Developer Settings -> "Allow OEM install"
• turn off phone
• Boot in fastboot: (press Vol- and connect USB cable, phone boots alone)
• Install TWRP "Autoinstall TWRP321_OREO_P20LITE" via batch file
RECOVERY TWRP Mod by catuva21
unzip, the file is automatic
https://mega.nz/#!0jwk1ArQ!4bHAlsDj9...QJv3IVXl51oOtI
• turn off the phone
• Boot in Recovery: Vol + and POWER, TWRP starts
• Install Magisk v16.4.zip
Magisk V16.4 https://drive.google.com/file/d/1E1k...V0MMnRmVa/view
• reboot
• Check Safetynet status = OK (maybe an error, that can not read information), but still works!
• Install Google App and Google Pay
• Enable Magisk Hide Google and Google Pay
Then Google Pay works with rooted P20 lite phone
Last edited:
hmm it works really fine for me. try installing stock rom from this thread https://xdaforums.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 and re-installing morfuz rom.
what u gotta do is check install then reboot immediately for recovery and make a wipe dalvik/cache. then restart the phone, install xposed manager apk and it will b fine
Hello can i ask u something ? its too much important for me.. p20 lite have 8 Second Stutter (speed) time..p20 pro camera have also 30 second exposure(stutter) time..Can u Or anyone try this exposure time ?
Is there going to be an updated version fixing most of the stuff? I would like to see the newest patch and also android 9 if possible. Safetynet would be a Nice addition as well as gpu turbo 2
Hello, does anyone know how to remove the custom rom and come back to the original ? Need it please
Module Causing no carrier
Hello. I have a problem with your ROM. When i installed the ROM it doesnt detect my SIM Card.
When i install the Magisk Module it shows me no carrier. How to fix this?
Hello. I have a problem with your ROM. When i installed the ROM it doesnt detect my SIM Card.
When i install the Magisk Module it shows me no carrier. How to fix this?
how to change boot animation?
hello how do i change the boot animation i try with https://play.google.com/store/apps/details?id=com.jrummy.apps.boot.animations&hl=en but it does not work yet it is in zip
thank you
hello how do i change the boot animation i try with https://play.google.com/store/apps/details?id=com.jrummy.apps.boot.animations&hl=en but it does not work yet it is in zip
thank you
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
8
V 4.0 - EMUI 8.0 ANE_165GT_KangvipDONOT COPY MY WORK, Ask for PermissionsCOMPATIBLE WITH
Code:- I am not responsible for the damage of your cell phone if you do not correctly perform the steps - loser warranty - if you are not sure better not to touch and leave this page
with all versions, P20 lite, remember to know your original compilation if at any time you want to return to stock for example ANE-LX3C25 with this data you can return to stock.
This version is based on the official EMUI modification made in the SIRIUZ rom combined with the work of Kangvip KangV & Team HRT for their best KangVIP framework, an Asian rom which was adapted for all European and Latin American versions.
REQUIREMENTS:
- - EMUI 8.0.0
- - Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- - unlock the bootloader.
- - install the recovery that I will leave, automated from windows-linux
- Guard the rom in an external memory.
- Turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press WIPE, then ADVANCE WIPE
- Verify that the partition DATA this in the f2fs extension
- Mark: Dalvik, cache, data, internal storage, system
- IMPORTANT !: do not mark "micro sdcard".
- Once you have marked, slide the "swipe to wipe" arrow to clear it.
- Go back to the main sale, press INSTALL
- Press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Look for the MORFUZ rom and flash
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- Reboot system.
- Congratulations now will start the rom MORFUZ
now compatible with magisk, if you want to have a magisk root, wait for the system to start normally, then download and flash the Kernel-Ramdisk.zip file by recovery twrp after starting, delete the supersu application.
https://mega.nz/#!AYoXGCpD!Kkd5o3HEc9VyYYUnlM38RuRb58_MJttaVMvGgg-x9Co
It seems that Huawei modified the modem partition in the September-October patch and the MORFUZ kernel does not work incoming and outgoing calls.
-IMPORTANTonly install this module from the root Magisk options if incoming and outgoing calls do not work.
https://mega.nz/#!F7oXzSRZ!8uuSCIx4UTbuWkTEYoFmTXTCwvIr6Reuc1vyq6OIhw0
Rom Morfuz
https://mega.nz/#!hcA3TIRT!FFn6i28sFuY4KoXvvJeflbFcqLv-h9Q_gjp6nGZSDXE
TWRP Mod by catuva21 - VERSION 2
unzip, the file is automatic
https://mega.nz/#!uD4FlCqL!ERBzP4ZWa2sR8f_wnn15F_cOFCdYVKgfYETjiehQkkQ
TELEGRAM GROUP
https://t.me/joinchat/ERAhfQ8kyF6_iH5nMun5dg
Contributors:
CATUVA21
Credits:
- Openkirin Recovery TWRP
- KangV & Team HRT for their best KangVIP framework
- Alexxx1
- Chisetdel31260
ROM OS Version: ANE-LXX(8.0.0)
ROM Kernel: Stock
ROM Firmware Required: EMUI 8.0.0
Version Information:
Status: Stable
Created on: 2018-07-07
Last Updated on: 2018-09-105DESCRIPTION ROM MORFUZ - KANGVIPDETAILS OF THE ROM
ROM MORFUZ 4.0
ROM MORFUZ 3.4
BENEFITS OF KANGVIP
- modification of battery icon
- Display cpu battery temperature
- status bar clock
- show time, week
- navigattion bar setting
- power key
- tune CPU GPU
- desktop setting (5x5,6x6,9x9...,5x9, 7x10 the way you like most)
- tune DPI
- mipop setting.
- and many more modifications21I've got to say, I really like the rom, super stable and works well, what I do have a problem with is the $30 VIP version of "k settings" I mean come on bro, it's not like u wrote the code urself, I understand time isn't free, but $30 is a bit steep to pay for premium rom features, features that most custom rom devs include free, features that I helped implement years ago, smh.... Other than that, great rom...
New posts
-
-
-
Development [ROM][A14][Pixel 7 Series] MATRIXX-v10.4.2 [GAPPS][04.19.2024]- Latest: AxxPyrtlexx20
