[ROM][N910C/H] CyanogenMod 13 semi-official builds

Status
Not open for further replies.
Search This thread

GizoMot

Senior Member
Jun 22, 2014
81
9
Gaborone
Redmi Note 10 Pro
The last build I downloaded dated 09-11-16 was all good until my note 4 started blacking out. Anyone else experiencing this? Thought it could be gravity box, deactivated it and it reduced the frequency of the blackouts. Please advice on the next build if any.

Sent from my SM-N910C using XDA-Developers Legacy app
 

014mahay

Member
Jul 18, 2012
15
3
Finally changing my ROM from Cyanogenmod as it will be not getting official support. Surprisingly other ROM feels significantly faster and I think CM13 was very slow and drain so much battery (maybe partially because I never clean install between updates). The last issue I had was
1. No proper signal often resulted in no signal at all
2. SMS sending bug (it was sent but tell me it was not, so I can't tell the difference)
3. Very slow boot
4. Slow response time in case of unlocking phone or from waking up
 

faeterov

Senior Member
May 2, 2016
167
46
Finally changing my ROM from Cyanogenmod as it will be not getting official support. Surprisingly other ROM feels significantly faster and I think CM13 was very slow and drain so much battery (maybe partially because I never clean install between updates). The last issue I had was
1. No proper signal often resulted in no signal at all
2. SMS sending bug (it was sent but tell me it was not, so I can't tell the difference)
3. Very slow boot
4. Slow response time in case of unlocking phone or from waking up


x2, landed here

https://forum.xda-developers.com/note-4/development/rom-simplrom-v2-t3034419

I would say same relative speed, better spen support, onlything I miss is the notifications style of CM and being able to see the album art when locked on spotify.
 

cannurkars

Senior Member
Feb 2, 2015
66
1
Guys i couldn't read all 333 pages, and couldn't try all of that builds. Please can anyone give me a download link for best cm 13 build's link? I mean which is the most stable.
I don't need fingerprint reader or bluetooth calls. I just want smooth ui, a camera don't crash, and working sd cards.

On the other hand, if there is a stable resurrection remix or paranoid android or team eos or whatever, i will accept all of that, just save me from this damn touchwiz.
 

escorpio1987

Member
Aug 26, 2015
43
9
Guys i couldn't read all 333 pages, and couldn't try all of that builds. Please can anyone give me a download link for best cm 13 build's link? I mean which is the most stable.
I don't need fingerprint reader or bluetooth calls. I just want smooth ui, a camera don't crash, and working sd cards.

On the other hand, if there is a stable resurrection remix or paranoid android or team eos or whatever, i will accept all of that, just save me from this damn touchwiz.
In my experience, if you don't need Bluetooth calls. The last build is the most stable IMO.
 

cannurkars

Senior Member
Feb 2, 2015
66
1
In my experience, if you don't need Bluetooth calls. The last build is the most stable IMO.

I read comments about last build but they say sms still buggy, during calls, screen actually work and have some random touchs. For example i used a long time on build 1 on page 1, that build is very good but, can't read sd cards. Once i used a build which is can read sd cards, no sms problems, no sensor problems etc. But i lost it and i couldn't find it again. If i remember correct, it's name was build 10 or 11. It was on the first page but now there is just build 1. All the other builds are deleted :(
 

escorpio1987

Member
Aug 26, 2015
43
9
I read comments about last build but they say sms still buggy, during calls, screen actually work and have some random touchs. For example i used a long time on build 1 on page 1, that build is very good but, can't read sd cards. Once i used a build which is can read sd cards, no sms problems, no sensor problems etc. But i lost it and i couldn't find it again. If i remember correct, it's name was build 10 or 11. It was on the first page but now there is just build 1. All the other builds are deleted :(
Last build have sensor problems during calls and the SMS bug that tells the user the SMS hasn't been sent even if it was actually delivered. SD works perfectly and Bluetooth have problems on calls and sometimes while playing music.

Rayman builds are nowhere to be found that I know. Have in mind that the ROM changed developer at some point and most builds are from erickwill hence some differences existing.
 

cannurkars

Senior Member
Feb 2, 2015
66
1
Last build have sensor problems during calls and the SMS bug that tells the user the SMS hasn't been sent even if it was actually delivered. SD works perfectly and Bluetooth have problems on calls and sometimes while playing music.

Rayman builds are nowhere to be found that I know. Have in mind that the ROM changed developer at some point and most builds are from erickwill hence some differences existing.

I understand.. :( Thanks for your attention..
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 149
    CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.

    Code:
    #include <std_disclaimer.h>
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    Broken:
    • Video recording (Missing symbols for AVC Encoder)
    • GPS
    • Bluetooth calls
    • RenderScript driver (Missing symbols)

    Changelog:
    http://review.cyanogenmod.org/#/q/project:CyanogenMod/android_device_samsung_treltexx

    Downloads:
    Build 1

    Builds can be flashed by your favorite recovery.
    Please do not post bug reports (or logcats) at this point!
    I'm well aware of most of them and will try to fix them as fast as possible.

    If you like my work, please consider donating a few bucks, it will help buying new devices and maintaining them (Most probably Exynos ones that no one else likes doing AOSP development on).

    XDA:DevDB Information
    CyanogenMod, ROM for the Samsung Galaxy Note 4

    Contributors
    RaymanFX
    Source Code: https://github.com/CyanogenMod/android_kernel_samsung_trelte

    ROM OS Version: 6.0.x Marshmallow

    Version Information
    Status: Testing

    Created 2015-11-29
    Last Updated 2016-07-15
    37
    Upcoming build #7 has some notable changes:

    * Finally fixed video decoding. This took me way longer than it should have, sleepless nights were spent debugging
    (plz donate caffeine).
    * Fixed music playback with Eleven (Music player) - the correct duration is displayed now; seek is working again.
    * Fixed numerous other audio bugs - someone should try BT headset functionality with the upcoming build
    * ro.secure=1 (FINALLY) - This was the most urgent blocking issue towards official nightlies
    * SELinux enforcing mode (almost) fully working - This is the second most urgent bugs preventing us from having nightlies

    So, let's squash the remaining annoyances and have some official builds!
    30
    The second Marshmallow! I am sure that you will solve the issues it has now.

    Thank you for your work and support mate. :D
    Video encoding is fixed! :)
    http://review.cyanogenmod.org/#/c/122021/

    Next on my list is the RenderScript driver (once it's working it should provide a noticeable performance boost).
    It seems to be broken on the cm-12.1 branch as well by the way.

    I also fixed a bunch of overlays, the most important one (to me) being proper brightness levels.
    Auto brightness works much better now :)
    Also, with Android's Doze feature (to save battery while suspended) I was able to make it through the day with 40% charge left in the morning, and now it's 8pm here. This includes flashing multiple test builds, debugging and so on, with the device being connected via USB for short periods (a few minutes each).
    Now we all know that charging on the USB port doesn't really 'charge' the device all that effectively, so I'm super impressed by this uptime.
    I wasn't able to get anywhere near this in any of my Lollipop builds, it's just crazy.
    24
    Btw. @RaymanFX please add option on Wifi , then Advanced then add to use auto band or only 2.4 or only 5 ghz. Cuz like on starbucks or mall. They have dual band wifi. And the 2.4ghz is crowded like what. And the speed only 2 mbit. And when it connect 5ghz its 50 mbit. So please make the option next update. That would be so helpful :) thz

    Hey, please check for 5 GHz functionality on build 8.
    I added the option for network channel back to Settings (in the WiFi submenu) - but you need to confirm it's actually working.

    @RaymanFX there is big problem, proximity sensor works BUT in-call when the device screen goes black the screen is still responsive and register all the touches. You can't make call without messing everything with your ear.. Please found some solution for this. I think this is something problem with the Doze feature that you removed or by the sensors.

    Should be fixed in build 8 :)
    I just made a few test calls and wasn't able to trigger any actions when the proximity sensor triggered screen off.
    But please test it and confirm on your side as well.

    I also made some changes to the audio HAL (support for BT wideband calls), but I doubt that it helps with the microphone issue. Anyways, I'd appreciate if someone could run a BT call and grab a logcat while doing so.

    Build 8 also has *proper* ExFAT and NTFS support, userspace and kernel were fighting over the correct mount in the previous builds. So if you were having issues with ExFAT/NTFS sticks or sdcards, please check again on build 8.

    On top of that, 4k video recording is implemented (not in the stock camera app, but for OpenCamera or FV-5 Cinema and friends).

    Last but not least, I remember someone reporting issues with Ethernet (via USB OTG), I did some changes to the network configuration tackling that area, so please test and confirm.
    23
    I figured it was time for a new build, so here's #10 (with BT and video recording being fixed again).
    This one should be pretty stable overall, at least it is for me (apart from some glaring camera issues, but that's because of our Lollipop blobs).
    I also updated the kernel to Linux 3.10.99.