• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][N960F][LineageOS 17.1][24-11-20][synt4x93]

Search This thread

vaib

Senior Member
Mar 30, 2010
574
48
Lucknow
And any way to make galaxy wear work with this? Not working currently because of the error "the operating system on your phone has been modified in an unauthorized way, and not compatible with the Samsung Galaxy app."
 

ghembuls

Senior Member
May 26, 2015
765
546
Jakarta
Been 2 days my N9 running this ROM, so far no problem with most features. I tried samsung version but always having random restart or SD card being ejected, keep coming back to pie until this on. No more random restart, ejected card and the adb is working.

Thanks Dev.
 

Icetea

Senior Member
Nov 8, 2014
1,754
517
Cromecast & Cast not working here. Had removed this rom now. I think it isn't usable for 'daily driver' at the moment.
To many not working features.?*?
 

vaib

Senior Member
Mar 30, 2010
574
48
Lucknow
Do I need to do anything else for going back to Dr. Ketan ROM? It's not booting after installing Lineage.
 

Icetea

Senior Member
Nov 8, 2014
1,754
517
Yes, you need to recover your data partition you have saved during using dr.ketan rom!
than yoe must install dr.ketan last release on top! Then clean cache/ dalvik and reboot.
 

vaib

Senior Member
Mar 30, 2010
574
48
Lucknow
Yes, you need to recover your data partition you have saved during using dr.ketan rom!
than yoe must install dr.ketan last release on top! Then clean cache/ dalvik and reboot.

I did not backup the data partition and now when I install Dr. Ketan, I am not able to boot past the flash screen. I just get a blacked out screen and nothing happens.
 

Icetea

Senior Member
Nov 8, 2014
1,754
517
I did not backup the data partition and now when I install Dr. Ketan, I am not able to boot past the flash screen. I just get a blacked out screen and nothing happens.

So the time seems come, that you have to flash last firmware with Odin! Please restart rooting again!:cool:
* flash last firmware with Odin
* reboot into stock system and finish first setup!
* set developer mode and set USB debugging to active!
* reboot into download mode and flash twrp 3.2.3 ( don't forget to remove checkmark in Odin setup for reboot!! )
* reboot into recovery again and FORMAT data partition
* don't forget to flash "Disable_ DM-Verity_ForceEncrypt_12.27.2019.zip" to prevent problems!!
* reboot manually into recovery mode and install dr. KETAN rom

Please be sure, that you use TWRP 3.2.3-0 for it!
 
Last edited:
  • Like
Reactions: vaib

vaib

Senior Member
Mar 30, 2010
574
48
Lucknow
So the time seems come, that you have to flash last firmware with Odin! Please restart rooting again!:cool:
* flash last firmware with Odin
* reboot into stock system and finish first setup!
* set developer mode and set USB debugging to active!
* reboot into download mode and flash twrp 3.2.3 ( don't forget to remove checkmark in Odin setup for reboot!! )
* reboot manually into recovery mode and install dr. KETAN rom

Please be sure, that you use TWRP 3.2.3-0 for it!

Damn! That's sad :( Thanks for the steps.
 

Icetea

Senior Member
Nov 8, 2014
1,754
517
As I wrote some posts before: I have changed between dr.ketan and LOS several times without getting trouble.
It is neccessary, that at first you have make a backup from data and vendor partitions of both systems!
And after recovering data and vendor partitions, you must reinstall prefered system again before you can use it!!!
 
Last edited:
  • Like
Reactions: vaib

vaib

Senior Member
Mar 30, 2010
574
48
Lucknow
So the time seems come, that you have to flash last firmware with Odin! Please restart rooting again!:cool:
* flash last firmware with Odin
* reboot into stock system and finish first setup!
* set developer mode and set USB debugging to active!
* reboot into download mode and flash twrp 3.2.3 ( don't forget to remove checkmark in Odin setup for reboot!! )
* reboot into recovery again and FORMAT data partition
* don't forget to flash "Disable_ DM-Verity_ForceEncrypt_12.27.2019.zip" to prevent problems!!
* reboot manually into recovery mode and install dr. KETAN rom

Please be sure, that you use TWRP 3.2.3-0 for it!
Is there no other way? I can still boot into lineage.
 

Icetea

Senior Member
Nov 8, 2014
1,754
517
It's not booting after installing Lineage.

Is there no other way? I can still boot into lineage.
:confused:

If LOS is able to start, you can use the short way.
* reboot into twrp and delete data partition
* if available, recover dr.ketan data from backup
* install dr.ketan rom at last step (internal sd and data will be safe)
* reboot
This should bring you back to dr.ketan ( no warranty given ):cool:
 
Last edited:

ghembuls

Senior Member
May 26, 2015
765
546
Jakarta
Did anyone try EdXposed with this?

I did with 26 Feb 2020 built, with gravitybox, greenify and WATweaker as modules. All working perfectly, I choose Yahfa instead of Sandhook, cause in many cases, Yahfa was proven to have more compatibility.

---------- Post added at 08:31 ---------- Previous post was at 08:19 ----------

Successfully flashed LoS 17.1 build 29 Feb 2020 with TWRP 3.3.1 v3.9 For Q
 
  • Like
Reactions: vaib

vaib

Senior Member
Mar 30, 2010
574
48
Lucknow
And again: i recommend to use twrp 3.2.3-0 for it! Otherwise you could get big trouble with other versions of twrp.
:p
Thanks man. Recovery was the issue. I was in 3.3 instead of 3.2. I'm able to boot into Dr. Ketan rom now.

Also, if anyone has managed to make Samsung galaxy watch work with this, please mention the steps.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 14


    REQUIREMENTS:
    • ONEUI2 (10) OR NEWER FIRMWARE

    INSTRUCTIONS:
    • TWRP
    • WIPE SYSTEM/DATA/CACHE
    • FLASH + (GAPPS/MAGISK)
    • REBOOT

    WORKING:
    • Wi-Fi
    • Bluetooth
    • Mobile Network
    • GPS
    • NFC Extended Length
    • Audio
    • Camera
    • Fingerprint Sensor
    • S-Pen
    • HDMI
    • Ethernet
    • MTP/ADB
    • Call Recording
    • Encryption
    • SELinux Enforcing
    • OTA Updates
    • Android Auto
    • Glove Mode

    BROKEN:
    • Iris Scanner

    NOTES:
    • Check my GitHub, I'm lazy.

    DOWNLOADS:

    XDA:DevDB Information
    LineageOS 17.1, ROM for the Samsung Galaxy Note 9

    Version Information
    Status: Stable
    ROM OS Version: Android 10
    ROM Kernel: Linux 4.9.218
    ROM Firmware Required: ONEUI2

    Contributors
    synt4x.93

    Source Code: https://github.com/synt4x93/

    Created: 26-02-2020
    Last Updated: 24-11-2020
    6
    New build is up with april security patch, and kernel built with clang instead of gcc.
    Android Auto should be fixed, has been confirmed by a few s9/n9 users now.
    4
    first one :) star man

    Sent from my Galaxy S9+ using XDA Labs
    3
    Can you please reupload on Google drive or afh? Mega not working for me.
    Tomorrow i will do

    Ok, I found several bugs:
    1.) it isn't possible to hide navbar and notification bar. If xou select this option, the app lineageos setup crashed. Extended desktop doesn't work.
    2.) It isn't possible to set a mailbox number in "telefon" phone app
    3.) It isn't possible to switch to speaker in phone app

    Btw. Is it possible to get dark theming for telefon, messager, contacts app? Maybe a other theming engine like substratum or hexinstaller?
    1 - seems to be an issue with lineage at the moment as far as we can tell. (aswell as a few other bugs in their trees at the moment)
    2+3 - works fine for me and all the other n9/s9/s9+ users of this rom on telegram, mailbox set the correct number by default for me and i can edit it aswell just tried, loudspeaker/bluetooth speaker is working fine for calling.
    Feel free to share logcat if possible, would be interesting to see what has broken it on your setup and not for anyone else, thanks :)

    edit -
    just saw you edited your post and removed 2+3, glad you got it sorted.
    3
    Seems pretty sweet but Android Auto is kind of important. You think a fix is possible?
    Yeah it will be done, haven't looked into it atm.


    Why is it not mentioned in the instructions that Flashable_G96XF_Firmware_TWRP_DTAD_r2.zip is needed to be able to boot? Without it, a boot loop occurs.

    Also, "Hey Google" isn't working properly. It turns itself off after enabling it. I used Open GApps nano. Someone got it working?

    If you read, you can see I clearly tell you that Q BL is required. A lot of people are unable to read in 2020 it seems.
    Hey Google is working fine :) feel free to jump on to telegram if you are having issues.