ATTENTION!
Introduction
Installation instructions
Special installation instructions
There are some "issues" I've discovered during the compiling and installation. I don't know if they are general or just specific one and depends on using NanoDroid microG and MagiskSU. But as it is.
1. All apps removes from /data/app/ after ROM installation complete and I have to manually install them to make everything works. So I've attached all apps in the Download section if anybody will face the same issue.
P.S. This issue was fixed in last commits from kali-nethunter git. So I've recompiled it from sources and added to nethunter installer. But haven't tested.
2. After the first clean installation of NetHunter with built in kernel Boeffla Config App can't sometimes to initialize the kernel. In this case you should boot to TWRP recovery and flash standalone kernel's zip. After that everything should work's great.
Downloads
Thanks to/Credits
XDA:DevDB Information
OnePlus3T LineageOS 15.1 NetHunter, ROM for the OnePlus 3T
Contributors
flypatriot
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: LineageOS 15.1
Version Information
Status: Testing
Created 2019-04-05
Last Updated 2019-04-11
Code:
[COLOR="red"]!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA! FLASH AT OWN RISK !!![/COLOR]
FeaturesThis ROM was created for personal use. It was compiled from last sources with some personal changes and bug fixes. It's based on Lord Boeffla's kernel for LineageOS 15.1 ROM with all Kali NetHunter features included. Unfortunately Lord Boeffla stopped developing for Android so it's possibly the last available kernel from him. This ROM was tested on OnePlus 3T LineageOS 15.1 clean installed ROM with NanoDroid microG and MagiskSU.
- based on boeffla kernel with config app features support
- mac80211 packet injection
- usb hid
- SYSTEM V support for PostgreSQL & msfconsole functionality
- usb bluetooth
- usb dongle modem support
- modprobe support
- built-in drivers for Ralink RT3070I & RTL8192CU chipsets
- usb dvb- & radio-receivers support
- NetHunter app with last changes & fixes
- drive droid v.1.38 (older version) with cd-rom & usb-rw support
- binkybear-terminal with notification bar support
- other NetHunter's features
Installation instructions
- Boot to TWRP recovery.
- Flash the nethunter-oneplus3T-los-oreo-kalifs-full.zip
- Reboot to system.
- Run NetHunter App and apply all requirements & give it root privileges.
- Launch DB Feed in SearchSploit section to initialize the exploits db.
- Launch Android Terminal & give it root privileges.
- Run 'apt update && apt dist-upgrade -y' command to get the latest updates.
- Launch other apps to set them up.
Special installation instructions
There are some "issues" I've discovered during the compiling and installation. I don't know if they are general or just specific one and depends on using NanoDroid microG and MagiskSU. But as it is.
1. All apps removes from /data/app/ after ROM installation complete and I have to manually install them to make everything works. So I've attached all apps in the Download section if anybody will face the same issue.
P.S. This issue was fixed in last commits from kali-nethunter git. So I've recompiled it from sources and added to nethunter installer. But haven't tested.
2. After the first clean installation of NetHunter with built in kernel Boeffla Config App can't sometimes to initialize the kernel. In this case you should boot to TWRP recovery and flash standalone kernel's zip. After that everything should work's great.
Downloads
Thanks to/Credits
Code:
[URL="https://www.boeffla.de/"]Lord Boeffla[/URL]
[URL="https://www.offensive-security.com/"]Offensive Security[/URL]
[URL="https://lineageos.org/"]LineageOS[/URL]
[URL="https://github.com/binkybear"]BinkyBear[/URL]
[URL="https://github.com/pelya"]pelya[/URL]
[URL="https://github.com/Re4son"]Re4son[/URL]
[URL="https://github.com/kimocoder"]kimocoder[/URL]
OnePlus3T LineageOS 15.1 NetHunter, ROM for the OnePlus 3T
Contributors
flypatriot
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: LineageOS 15.1
Version Information
Status: Testing
Created 2019-04-05
Last Updated 2019-04-11
Last edited: