• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][NZH54D][2021/09/05][Asus Nexus 7 2012 WiFi/3G][F2FS/EXT4]Android 7.x AOSP

Search This thread

danja95

Member
Dec 21, 2017
19
1
Feedback for tilapia
Bugs:
- Landscape mode if tablet is in 16:9 position, launcher will not rotate.
- gApps will not install, even with the speical config file
- 3G Module does not work, even a external huawei stick will not work
 
Feedback for tilapia
Bugs:
- Landscape mode if tablet is in 16:9 position, launcher will not rotate.
- gApps will not install, even with the speical config file
- 3G Module does not work, even a external huawei stick will not work

which build do you have installed?
I'm currently on Tilapia Build 20171208 and I'm facing none of the mentioned bugs.
I used open gapps pico, but flashed them after the initial configuration of the ROM.
 

AndDiSa

Senior Member
Dec 2, 2009
3,548
4,718
Heidelberg
i the attachment you can find my logfile.

i hope someone can help me.

regards daniel

I am wondering how you can even open the device. Can you please describe the steps you have done when installing the ROM? The log is full of errors and exceptions party related to encryption (applications using an outdated mechanism to derive the keys) but also related to usbmanager and mtp service.

I suggest you to set up the device newly following the installation instructions in the OP. Do a full wipe and do *not* restore any app / data using e.g. Titanium or something else.

Sent from my Nexus 7 using XDA Labs
 

danja95

Member
Dec 21, 2017
19
1
I am wondering how you can even open the device. Can you please describe the steps you have done when installing the ROM? The log is full of errors and exceptions party related to encryption (applications using an outdated mechanism to derive the keys) but also related to usbmanager and mtp service.

I suggest you to set up the device newly following the installation instructions in the OP. Do a full wipe and do *not* restore any app / data using e.g. Titanium or something else.

Sent from my Nexus 7 using XDA Labs

My Steps:
1. Boot into Recovery
2. Advanced Wipe -> Check everything
3. Select my OTG Device (where i have my ROMs)
4. Install the AOSP ROM
5. Reboot Again to Recovery in Recovery
6. Install BeansGAPPS
7. Install SuperSU latest
8. Wipe Cache/Dalvik
9. Reboot in System
10. Minimal Setup (WLAN, Google Login, Kernel Auditor App)
11. Logcat to SDCARD
12. Logfile zipped and uploaded here


btw. i'm using a USB HUB on OTP with: USB Flashdrive, Arduino Leonardo (act as HID Consumer) and a Huawei E1550 (3G)
 
Last edited:

AndDiSa

Senior Member
Dec 2, 2009
3,548
4,718
Heidelberg
@danja95 that's strange because in the log I saw initialization of several laucher applications. From where do they come if they are not installed? Did you wipe data, too? Otherwise you will keep the apps previously installed. Another thing which might cause the issues: if you install SuperSU not in systemless mode you run into issues. Try to skip the SuperSU installation or use Magisk 15.3 which always installs systemless and provides SuperSU functionality, too.

The USB-Hub could cause the issues with mtp and usb so probably it would be better to remove the hub , at least until everything is set up correctly.
 

danja95

Member
Dec 21, 2017
19
1
@danja95 that's strange because in the log I saw initialization of several laucher applications. From where do they come if they are not installed? Did you wipe data, too? Otherwise you will keep the apps previously installed. Another thing which might cause the issues: if you install SuperSU not in systemless mode you run into issues. Try to skip the SuperSU installation or use Magisk 15.3 which always installs systemless and provides SuperSU functionality, too.

The USB-Hub could cause the issues with mtp and usb so probably it would be better to remove the hub , at least until everything is set up correctly.

I really sure i wipe everything. To make me sure i always wipe in advanced mode.

SuperSU must be systemless. I will try with Magisk. But back in few days i tried allready magisk, with same results.

My USB Hub is the main feature of my Build. In "nAOSProm-7.1.1-tilapia-b05" i have no issues with the hub, but another problem.

but ok. at GMT+1 6pm i will try it in this way: Only ROM and BeansGAPPS and i will provide you a log again.
 

Ahkah

Senior Member
Jun 24, 2014
294
102
landmarks, watermarks[,] and benchmarks

Thank you very much for Your latest ROM, dear Andisa. First day. Antutu showed 21871 points. 3D 367, UX-9635, CPU-9239, RAM-2630. Tilapia Nexus 3G 2012

I am sorry, but without any other values for comparison these numbers are as interesting as the famous rice bag in China ;). What about the original OSs for this device (Android 4.0 / 4.1 / 4.4 / 5.1)? I could only find a specimen with hacked and modified Android 4.1 which showed just about 12000, but the 3D test had failed. Memory and CPU were a little bit faster than Android 7, but UX was about half of it. But I think that hacked OS version might be the culprit.

By the way: Antutu is an extremely "un-nice" app that starts automatically (cannot be prohibited in Android 7, for whatever reason?!?) and constantly shows a notification. There is only one solution: immediately uninstall.
 
Last edited:
  • Like
Reactions: melkozerov

Top Liked Posts

  • 1
    New Versions 7.1.2 (2021-10) are available
    I was away from my Nexus 7 2012, and thus late to the party. But, successfully installed the October 2021 Grouper ROM and Oct 21 version of GApps. Everything works great. Thanks, @AndDiSa.
  • 7
    New Versions 7.1.2 (2021-10) are available

    Hi guys, a new release but only a few changes, i.e. the security paches for October 2021.
    The full list of changes, as always, you can find in my Github repos

    The "standard" versions for Grouper / Tilapia are available for download:
    aosp_grouper-7.1.2-ota-20211006.eng.ds.zip (MD5: b57ddee37bad03f59e2eff562076b027)
    aosp_tilapia-7.1.2-ota-20211006.eng.ds.zip (MD5: 65ea4ea189a41ec7792fb13a876157da)

    as well as the MicroG-Patched images:
    aosp_grouper-7.1.2-mg-ota-20211006.eng.ds.zip (MD5: d5d788b3fa735c3e57d9f0fb562e15f6)
    aosp_tilapia-7.1.2-mg-ota-20211006.eng.ds.zip (MD5: 643f8fdf2195c2395f788611578c108e)

    I quickly tested the ROM and didn't find issues, nevertheless I will wait for feedback from the community before I'll add the new version to the OP.

    If you report a successful (or unsuccessful :)) installation, please note which version (Grouper / Tilapia, with or without MicroG-patch) you have installed and tested. Thank you very much!
    Stay safe!
    3
    Sorry to derail the thread, I literally just found my old nexus 7 tablet after who knows how many years. Is there a guide available to install the latest custom rom listed above? Appreciate any guidance, thanks!
    Welcome!
    We're on page 242 of this thread. Page 1 has detailed steps to install this awesome ROM.

    Depending on the level of your knowledge links to the latest version, Sep (2021-09) ROM are posted on Sep 19, 2021, on this page. A few posts after the ROM links, there is a post with links for a Config file posted on Sep 22, 2021.

    Hope this helps.
    3
    I would advice to flash Magisk through TWRP right after dirty flashing the new ROM version instead of using the Magisk app. This has worked for me without any issue for numerous iterations now. If you do a clean flash, just reboot after flashing the ROM, then go back to recovery to flash Magisk.
    3
    ...The only thing you will loose (ime) is any apps that you have purchased through google - you cannot activate paid-for apps without gplay (and so the entire google framework)
    You can use Aurora Store to download paid apps if you log in via the same account that you have used to purchase those apps.

    If this is too much of a risk for you, there is a somewhat inconvenient workaround for apps that you have purchased via Play Store (not for all apps, but for some). Only thing you need is root plus a root file manager to grab those paid apk's from your /data directory and sideload them to your Google-free device.

    As said before, it works for some apps, but most of the paid apps are tied to your Google credentials and will check if Google services are available and if the correct account is logged in.
    2
    I finally found the time to upgrade from April build and I tried to flash the ROM only, no Micro-G, no GApps.
    I use the device like a monitor for my USB inspection camera so I don't need the G framework at all.
    I added 3 apps from apkpure (Endoscope, Nova 6 and Pixel icon pack) and...they work! :)

    The tablet is very fast and responsive. No more lags at all on the UI.
    Of course I would recommend this solution for those who have a very specific use of the device, like me.

    @AndDiSa do you think that resizing the System partition may help in keeping the device snappy using GApps? How could the difference between GApps and no-GApps be so dramatic?
  • 311
    This thread is about installing and using AOSP 7.x (Nougat) ROM for the ASUS Nexus 7 Grouper / Tilapia devices.

    Asus - Model names

    Grouper = Asus Nexus 7 2012 WiFi
    Tilapia = Asus Nexus 7 2012 3G


    Initial Setup Installation
    1. Update Recovery to TWRP 3.5.2-9 for Grouper resp. TWRP 3.5.2-9 for Tilapia
    2. Boot into Recovery
    3. Factory Reset (only needed if you are not already on Android 7.x AOSP)
    4. Install 7.1.2 Grouper OTA-Package (Build 20210917) (md5 :e0381d56f4f1c11c095a9d0057c50699)
      or
    5. Install 7.1.2 Tilapia OTA-Package (Build 20210917) (md5: 7a6b6d37b2f8ee5964c8d9164305a846)
    6. Reboot into recovery
    7. Install Open GApps (arm/7.1/pico)
      (if you have issues regarding the size of the GApps please refer to the next post)

    [*]To get root access, I suggest to use either Magisk (V21.4) and Magsik Manager (V8.0.7) the "old" version of Magisk, or the new unified Magisk (V23.0) which can be flashed by TWRP, too. Probably you'll need to rename Magisk-v23.0.apk to Magisk-v23.0.zip

    Do not install Magisk on initial setup as it might lead to issues. Start the ROM without having root access the first time and install Magisk in a second step.

    If you are already on Android 7.x AOSP, it's sufficient to do the follwowing steps:

    Update Installation
    • Boot into Recovery
      • Install 7.1.2 Grouper OTA-Package (Build 20210917) (md5 :e0381d56f4f1c11c095a9d0057c50699)
        or
      • Install 7.1.2 Tilapia OTA-Package (Build 20210917) (md5: 7a6b6d37b2f8ee5964c8d9164305a846)
      • Reboot into recovery
      • Install Open GApps (arm/7.1/pico)
      • Wipe cache/dalvik-cache (optional, but suggested)
      • reboot

    Important: For more detailed installation instructions please refer to the next post
    Important: First boot after upgrading will take a bit longer (stays on ANDROID) because of art optimizations

    flash and use on your own risk!


    CREDITS,
    AOSP/Google, LineageOS, Ziyann for setting up the Grouper-AOSP repository and his Unlegacy Android project, daniel_hk for some hints how to get the 3.1 kernel running with N, timduru for his work on the Asus Transformer, Timur Mehrvarz for his work on the tegra kernel, Francisco Franco for his kernel work in general

    Bugs:
    • please report

    Latest Changes
    • 20210917(AOSP 7.1.2)
      • I fixed the crash of the clock application reported by @momentoid
      • I added a missing patch for external/sqlite
      • I applied the security fixes for September 2021
      • I optimized the kernel config settings, especially removed some superflouus settings
      • I applied / backported a bunch of CVE-kernel patches. Please have a look at the sources in Github to see the whole list of changes

    Latest version with MicroG-patch applied to them:
    aosp_grouper-7.1.2-mg-ota-20210917.eng.ds.zip (MD5: 9ea020054cfbe1b646e1c9cdcb11358d)
    aosp_tilapia-7.1.2-mg-ota-20210917.eng.ds.zip (MD5: 617fbfddc39174fcc0486de8081448e7)


    Changelog
    Please refer to the changes found in the github repos

    All ota packages can be found here:
    AndDiSa ROM files repository

    Sources

    https://github.com/AndDiSa

    If you would like to build from the sources, you can do so by cloning and build from repositories:
    but please take in mind that you need to have some free space (>= 100 GB) and some time ...


    XDA:DevDB Information
    Android 7.x AOSP, ROM for the Nexus 7

    Contributors
    AndDiSa
    Source Code: https://github.com/AndDiSa?tab=repositories

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.1.x
    Based On: AOSP

    Version Information
    Status:
    Stable

    Created 2016-09-23
    Last Updated 2021-03-05
    65
    Please note:
    • the system partition is already quite full which leads to the problem that gapps probably will not install correctly and that may lead to weired problems (apps closing / not showing up correctly / ...). I suggest to use the dynamic gapps package linked above. In addition I suggest you to erase the system partition completely before applying the OTA package
    • If you get "Error 7" when trying to flash the ROM directly after upgrading to TWRP 3.5.2-9, wipe the Boot, System and Cache partition and clean dalvik-cache, then re-boot to Recovery and try again (you will not loose any data as long as you do not wipe the Data partition).
    • If you get "Error 70" when installing GApps copy the attached gapps-config files into the same directory where the gapps installation packages is copiedI.e. something like

      /sdcard/open_gapps-arm-7.1-pico-20210922.zip
      /sdcard/gapps-config-tilapia.txt
      /sdcard/gapps-config-grouper.txt

      and then try to start the installation again. Error 70 should be fixed.

    Some additional hints
    • If you are in a bootloop which shows to Google logo again and again, it's sufficient to hold vol- while booting. The next bootloop will boot into bootloader.
    • If you are in a bootloop which shows the ANDROID splash screen continuusly, connect your device to your PC and enter
      Code:
      adb reboot bootloader
      After a few seconds the device should show up the bootloader screen
    62
    Hi guys,

    first of all I would like to thank all of you for your support you offered to me in the last days and I really feel honoured that so many of your would like to support / help me so that I am able to continue the development for the Nexus 7.
    I've got many offers for a "new" Nexus device from all over the world which I really didn't expect. I was really torn between continuing and stepping out. I've thought very much about pros and cons and it wasn't an easy decision especially if you get so much positive feedback. Thank you again!

    Finally I've decided to stop development for the Nexus 7 (at least for the moment). There are several other projects (not all of them related to Android) I've in mind and probably this now was a broad hint to start with something different. I've uploaded the sources of the ROMs latest version (inc. security patches for June 2019) to Github and tested together with @fidoedidoe whether all needed repos and changes are consistent and that one can build the ROM from those repos without the need of doing additional modifications or patches. The build should run smoothly after synchronizing everything. I will also support and help everybody who would like to step in and continue the builds.
    I know there are several people interested in building the ROM from sources. Probably there is someone (or probably even a group) who would like to continue ...
    Cheers,
    AndDiSa
    55
    2019/02/05 - release for Grouper and Tilapia uploaded

    I've just uploded the latest version of the ROM for Grouper and Tilapia. As always the Android security issues listed in the latest Android Security Bulletin are patched in this ROM.

    Beside that once again I've worked much on the kernel side. Some features are added (multiple binder devices, alarm timer device, ...) and some bugs have been fixed.
    I am still working together with @OlliWi on the slow charging issue which occurs from time to time. Even if I was able to get charging currents up to 1500mA while the device was connected to a charger, we still have the impression that the cable / charger detection needs to be improved. We are on it ...

    Those of you who are familiar with the installation process of the ROM can download directly from here, otherwise please first read the instructions in the OP

    7.1.2 Grouper OTA-Package (Build 20190209) (md5: 885e601a06a2104628a1e450b73f3a18)
    7.1.2 Tilapia OTA-Package (Build 20190209) (md5: 8e4c0e1955ecc0bb65a51582bb01f779)

    And finally as always: flash on your own risk ... ;)
    52
    New year ... new security fixes (2019/01/05)

    Hi guys,

    I've just uploaded a new version of the ROM for our beloved Nexus 7 (Grouper / Tilapia) having the January 2019 security fixed applied to it.

    Beside that I found a bug causing bootloops on initial install / after wiping dalvik. This was caused by zygote not having enough memory available to create the boot.jar on the fly. To fix this issue, I am doing a dex-preopt for the boot image on compile time now which leads to a slightly larger image but improves initial boot time a bit, too.

    To get more memory free on the /system partition, I debloated the ROM a bit, e.g. removed the Browser2, LegacyCamera, Music and Calendar apps as some of them even didn't work fully. There are several alternatives available in several stores which you can install if you need them. Probably most of you do not even notice that these apps were removed.

    Most changes were applied to the kernel. I tested the changes in the last 4 weeks but as I have a Grouper device only and I cannot test each functionality I cannot exclude that something doesn't work as expected. So please file a bug report (best with logcat and a meaningful bug description) if you find some unexpected behaviour and I will have a look at it.

    The most important fix here is probably the improved charging behaviour (many thanks to @OlliWi who provided with fruitful analysis and hints and pushed me to have a deeper look at this issue).
    To get a faster charging of the device, do not boot with a USB cable connected as this prevents the device to charge with more than 500mA (or at least disconnect and re-connect the cable after the device booted).

    I've updated the links in the OP, so you can download the latest version from there.

    Happy new year to all of you!