. It would be better taught how toThere's a trick to cutting off the file to the exact right size and it'll work. Upload the file, I'll look at it for you.
. It would be better taught how toThere's a trick to cutting off the file to the exact right size and it'll work. Upload the file, I'll look at it for you.
Here you are:Ok I need stock boot+recovery at the moment... in your download, these are unmodified original ?
As for modem, you should be able to just dump it with dd ( dd if=/dev/block/mmcblk0p10 of=... bs=4096 ), then call the result modem.bin and include it in the .tar ...
Unfortunately, you have to try this to be sure, and if it messes up you have no radio because we have no full stock firmware... annoying!
Now we have from my n7100 (arrived today from Handtec). Which block do you need?Do you have a link to a full stock firmware? I can only find OTAs... or did you rip this one from your device?![]()
Yah, but I still need to see the file to figure it out ... I can guess but without seeing the file it could well be nonsense.. It would be better taught how to![]()
Thanks - these are originals, not CWM, right?Here you are:
boot+recovery (from XXALIE)
Still needing RADIO partNow we have from my n7100 (arrived today from Handtec). Which block do you need?
http://imageupload.org/en/file/241713/screenshot-2012-10-02-13-03-14.png.html
http://imageupload.org/en/file/241714/screenshot-2012-10-02-13-03-21.png.html
Recovery is original - kernel is insecureThanks - these are originals, not CWM, right?
Still needing RADIO part![]()
. It would be better taught how to![]()
Can you upload damp modem for chainfire?..Now we have from my n7100 (arrived today from Handtec). Which block do you need?
http://imageupload.org/en/file/241713/screenshot-2012-10-02-13-03-14.png.html
http://imageupload.org/en/file/241714/screenshot-2012-10-02-13-03-21.png.html
:crying:I've already flashed cwm-recovery:crying:
Probably need sources for Triangle Away ...Can you upload damp modem for chainfire?..
...and I upload bootloader for new triangle away, then back to home...
dump LIE:Can you upload damp modem for chainfire?..
...and I upload bootloader for new triangle away, then back to home...
No? ok how can you say...Probably need sources for Triangle Away ...![]()
Thank Maitre, I got it you can flash via Odin:Ok so, if you look at the modem posted, you will find that from position 0xC00200 its all zeroes. You'll see a signature at 0xC00000.
I'm not sure whether you should cut off at 0xC00100 or 0xC00200, try both, see which one works.
Oh, if somebody can post this:
dd if=/dev/block/mmcblk0 of=... bs=4096 count=4096
Confirm, works and counter=0:good:
I replaced the cache.img and no problem..Reupload this rom colleague..While nothing flash, detects the problem!
BumpOh, if somebody can post this:
dd if=/dev/block/mmcblk0 of=... bs=4096 count=4096
Problem fixed, ROM reupload, it's OK...While nothing flash, detects the problem!
@bodivas, uploads screens of partition table...Bump![]()