[ROM][OFFICIAL][11.0][Beryllium] Pixel Experience [AOSP][2021/03/11]

[kmykoh]

anyone able to watch netflix at 1080p with this rom?

i think you can't because poco did not renew its l1 license

 

[chaosbattousai]

none

Really? I'm waiting for the stable version to update my poco, but I didn't know it was already that stable.

 

[SoftLibre]

in the latest beta i have a strange problem, without selecting silence mode after sometime notificacion and ringing only vibrates and no sound volume but the ringing volume is max. I will try a clean flash later but this is strange . I made a dirty flash of the latest build

It has also happened to me on several occasions, and my installation has been clean: with all the wipes and format data

In addition I add a herratic behavior of the automatic control of the brightness of the screen.

For the rest of the moment perfect!

 

[Retrial]

Really? I'm waiting for the stable version to update my poco, but I didn't know it was already that stable.

PE 11 for our device it's already stable since a long time.
Pixel Experience team use generally the term "Beta" for all the devices they support. But this month the term will change to "Stable" and Plus edition coming, as they announced.

 

[dokiace]

Really? I'm waiting for the stable version to update my poco, but I didn't know it was already that stable.

yeah i'm on this "beta" but it is stable. the touch input lag is even better than previous PE 10

 

[that1]

Hello good folks,
Thank you for this wonderful rom. Flashed yesterday following instructions. Also flashed Magisk. Everything went smoothly. One problem though that needs your urgent help.
The wifi is not working properly. Disconnects in few seconds. Hard to reconnect. Unusable.
Was working very well indeed till yesterday on PE10+.
This is my only daily use phone. If I cannot get wifi to work, I will have to go back to PE10+.
Please help.
Thanks in advance.

 

[Antor Chom]

The waiting for the stable update is going to hard to me. Anyone know any information about the estimated release date?

 

[xelwaren13]

pretty smooth the only issue ive seen is heating issue while charging from 40-45 °c which is pretty hot

 

[VaktBleppe]

When Plus comes out, can you dirty flash it over the normal version?

 

[guhvanoh]

When Plus comes out, can you dirty flash it over the normal version?

Yes, but clean flash is recommended. This is PE11 to PE11+.

 

[kmykoh]

When Plus comes out, can you dirty flash it over the normal version?

will work without issue. There isn't much changes

 

[kmykoh]

pretty smooth the only issue ive seen is heating issue while charging from 40-45 °c which is pretty hot View attachment 5241671

that's why the charging current becomes lower. Means thermals are working. what do you hate for?

 

[xelwaren13]

that's why the charging current becomes lower. Means thermals are working. what do you hate for?

nothing i just want to share to dev in case you didnt know, as a user you should know that to fix the issue even if it is a bug or not

 

[phaleg]

Yes, but clean flash is recommended. This is PE11 to PE11+.

According to their blog, this month is coming stable 11 and 11+
they advice to do a clean flash and formatting data, for previous builds users

 

[guhvanoh]

According to their blog, this month is coming stable 11 and 11+
they advice to do a clean flash and formatting data, for previous builds users

These are the scenarios I envisage:
If you're going from PE less than 11 and you're encrypted, clean flash and format data is compulsory!!
If you're going from PE less than 11 and you're not encrypted and you're going to stay decrypted, clean flash and no need to format data. Remember to flash dfe before you boot to PE11!
If you're going from PE less than 11 and you're not encrypted and now want to encrypt, clean flash and format data!
If you're going from PE equals 11 to PE11+, you can dirty flash, but clean flash is recommended. If you weren't encrypted, flash dfe before you boot to system!
If you're already on PE11 and going to March PE11 and are encrypted, OTA should work fine.
If you're already on PE11 and going to March PE11 and are not encrypted, flash through recovery and flash dfe before you boot to system!!

In all scenarios above, please backup your data to at least three (3) external sources before attempting to upgrade/install PE11.
This is free advice which you haven't paid for. Use with caution. If you break your phone, you get to keep all the pieces. Standard Disclaimer applies.

 

[Asica10]

What is your opinion: Is it ok this ROM for daily usage? or better wait some weeks?

 

[Stersound]

What is your opinion: Is it ok this ROM for daily usage? or better wait some weeks?

In my opinion, yes the ROM works smooth with no lags or bugs (based on my not extensive usage) I've been using it for almost a month. There was no big difference between the previous release and the final beta.

 

[guhvanoh]

What is your opinion: Is it ok this ROM for daily usage? or better wait some weeks?

I've been using it since it first came out as my daily driver. I've no problems at all. If you're considering changing to PE from another ROM, then I'd say it's down to the time you have to configure stuff and play around so you get to know it. If you're really sure, then take the plunge now. By the time the March release is out, you'll be used to it and know your way around so upgrading won't be a problem at all. If you don't have the time to play around now then wait for the March release.

 

[Asica10]

Thank you for answer. I know PE very well and most of custom roms. Right now im at stock rom from 2 months but i can't stand it anymore... and I am considering going back to PE

 

[haldaios]

The only problem I faced is with the screenshot option sometimes it doesn't take and I have to restart the phone to enable it, other than that I love it