[ROM][OFFICIAL][12][Galaxy S10/e/+/5G] PixelExperience [AOSP][ENCRYPTION]

Search This thread

SeppGoPro

Senior Member
Hi together,
I cannot install the SW on my Samsung S10. I have been on lates Stock Samsung SW.
Bootloader is unlocked.
I tried flashing 18.1 (lineage-18.1-20220415-recovery-beyond1lte.img) and the one paired with the downloadlink (PixelExperience_beyond1lte-12.1-20220416-1653-OFFICIAL.img). I renamed them to recovery.img and packed them with 7z into a .tar file.
Then I uses Odin v3.14 to flash it (AP) while phone is in bootloader.
After restart I cannot enter recovery and system boots into samsung sw. When shut down and boot in recovery the recovery is stock recovery.
After flashing and trying to get in recovery directly it does not work and skip to normal boot.

What am I doing wrong?

Obviously I'm not even getting to the point, where I can flash the SW via recovery. Pls help I'm rly looking forward to flash this software.

Update: I was able to enter the recovery after flashing. I restarted and kept volume up + bixby + power button pressed. Then I let go and pressed power button to get pass bl lock warning while keeping volume up + bixby pressed. Power button was not pushed anymore. Then I have been able to boot into recovery and flash pixel experience.
Booting also worked fine.

Not sure why booting in recovery was such a pain in the a**.
 
Last edited:

Fuzhouuuuu

Member
Apr 16, 2022
6
2
When I use wechat, the font becomes very small (it doesn't make much difference to adjust the font size in time in the app). Is this a bug?
 

stalker14086

Member
Jan 6, 2018
22
2
is there a chance that the autonomy of this firmware will be repaired only this does not allow you to stay on it permanently at the moment ???
 

witampanstwa_

Senior Member
May 14, 2016
101
29
Hi, here are some issues I noticed:
- UI hangs for a second or two from time to time,
- Camera hardware crashes after running a camera app, up to four times in a row until it initialises properly,
- Camera hardware crashes after exactly a second of video recording in a [email protected] mode,
- AOD does not adapt to lighting conditions
 
Last edited:

meow123123

New member
Apr 28, 2022
1
0
hi, i try to do it with my samsung s10e, and when i go to download custom recovery with heimdall, and my samsung (in download mode) giving me an error "only official released binaries are allowed to be flashed(RECOVERY)". this error was not there before. idk what to do =(
 
Hello @Orel6505 thank you for your work. you save me from buying google pixel 5 (they are the same size as the P5 s10e) but there is a problem I'm loading albaraka bank but it won't open, it was working in stock version before. and working on official pixel experience 12 redmi note 9 pro dada. please be a helper. thanks.
 

Attachments

  • SHA_20220518_142348855_8.4.400.mp4
    39.8 MB · Views: 0
  • screen-20220518-135931_Trim.mp4
    3.8 MB · Views: 0
  • Screenshot_20220518-143611_Ayarlar.png
    Screenshot_20220518-143611_Ayarlar.png
    135.1 KB · Views: 34

DoctrineDerp

New member
May 19, 2022
1
0
I've been running this rom on my standard s10 for almost a month and it's been great apart from the low call volume. Has anyone found a way to boost this yet?
Voice on whatsapp calls seems fine too, it's regular telephone calls that are too quiet.
 
When I turn on LTE on the lock screen, nothing appears as in the picture below, and wifi and mute it does not show up, it's really annoying. please solve as soon as possible. thanks. Anyone else experience this situation?
 

Attachments

  • Screenshot_20220522-222108_Pixel Launcher~2.png
    Screenshot_20220522-222108_Pixel Launcher~2.png
    1.5 MB · Views: 44
  • Screenshot_20220522-222206_Pixel Launcher~2.png
    Screenshot_20220522-222206_Pixel Launcher~2.png
    60.5 KB · Views: 44
  • Screenshot_20220522-222219_Pixel Launcher~2.png
    Screenshot_20220522-222219_Pixel Launcher~2.png
    58.2 KB · Views: 48

froz3nbug

Senior Member
May 11, 2012
60
13
Guys, which GCam version are you using?? Please suggest me the most latest and stable one (S10e)...Thanks 🙏
 

ldmondini

Senior Member
Mar 12, 2015
81
35
Guys, which GCam version are you using?? Please suggest me the most latest and stable one (S10e)...Thanks 🙏
Zgcam or bsg latest 8.1, both works well on my s10e. None is perfect and you have to choose between Zgcam that allows you to choose the aperture size of the lens or bsg that let you use the secondary sensor.
 
  • Like
Reactions: froz3nbug
Zgcam or bsg latest 8.1, both works well on my s10e. None is perfect and you have to choose between Zgcam that allows you to choose the aperture size of the lens or bsg that let you use the secondary sensor.
No, you have a mistake. Front camera and ultra wide lens and wide angle lens work with zgcam. After saying settings/about zgcam mod/enable mod, close and open the application, then open settings/mods config creator/experimental set id camera/enable cam 1 and cam 2.

and enjoy the ultra wide lens.

there is a bug i just observed: it takes 2 seconds to save image in normal stock rom. but it takes 5 seconds or more in this pixel rom. I couldn't find the reason, even if there is a solution, everyone can benefit if he writes!
 
  • Like
Reactions: ldmondini

ldmondini

Senior Member
Mar 12, 2015
81
35
Thanks for the advice, but on my s10e in settings/about zgcam mod I have no lines or flags to enable mod🤔

Screenshot_20220527-174124_Fotocamera.png
 
Last edited by a moderator:

Attachments

  • Screenshot_20220527-203059_Kamera.png
    Screenshot_20220527-203059_Kamera.png
    154.9 KB · Views: 19

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Guys, which GCam version are you using?? Please suggest me the most latest and stable one (S10e)...Thanks 🙏
    Zgcam or bsg latest 8.1, both works well on my s10e. None is perfect and you have to choose between Zgcam that allows you to choose the aperture size of the lens or bsg that let you use the secondary sensor.
    1
    Zgcam or bsg latest 8.1, both works well on my s10e. None is perfect and you have to choose between Zgcam that allows you to choose the aperture size of the lens or bsg that let you use the secondary sensor.
    No, you have a mistake. Front camera and ultra wide lens and wide angle lens work with zgcam. After saying settings/about zgcam mod/enable mod, close and open the application, then open settings/mods config creator/experimental set id camera/enable cam 1 and cam 2.

    and enjoy the ultra wide lens.

    there is a bug i just observed: it takes 2 seconds to save image in normal stock rom. but it takes 5 seconds or more in this pixel rom. I couldn't find the reason, even if there is a solution, everyone can benefit if he writes!
    1
    I have this option. Have you tried to download apk from developer's own site?
    I have cleaned app cache and the option apparead! Thanks a lot👍
    1
    I just notice after updating to may update Bluetooth calls do not work properly again
    1
    I just notice after updating to may update Bluetooth calls do not work properly again
    I also have noticed this. When calling via Bluetooth (Sony WH-1000XM3 and car audio system), voices are robotic and completely not understandable. Do you experience the same symptoms? Anyone else having this issue? If so, should we unroll this update and issue a bug report somewhere?
  • 12
    NFjZzFl.png

    PixelExperience Official for Samsung Galaxy S10/e/+/5G [beyond0lte&beyond1lte&beyond2lte&beyondx]

    Please read whole post before downloading
    Code:
    *** Disclaimer
    * Your warranty is now void.
    * I am not responsible for anything that may happen to your phone by installing
    any custom ROMs and/or kernels. (Bricked devices, dead SD cards,
    thermonuclear war, Seal mad or you are getting fired because the alarm app
    failed…)
    * YOU are choosing to make these modifications, and you do it at your own risk.
    if you point the finger at me or anyone else for messing up your device, you haven't
    done what we told you to do.
    * Please do research if you have any concerns about features included in your ROM

    What is this?
    PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device


    Whats working?
    Wifi
    RIL
    Mobile data
    GPS
    Camera
    Flashlight
    Camera
    Bluetooth
    Fingerprint reader
    Face unlock
    NFC
    Lights
    Sound / vibration
    FP gestures
    Known issues
    VoLTE/VoWIFI - not working for most Samsung devices, so no fix in the near future
    You tell me

    Download: (Always Download the latest)
    First time installation:
    you CAN NOT INSTALL this ROM using TWRP.
    You need to use the Official Lineage recovery provided by Linux4 (link in downloads section)

    Installing Lineage Recovey (BL already unlocked):​

    Odin:
    Rename the downloaded .img to recovery.img and add it to a .tar archive using, for example, 7Zip
    Flash the resulting .tar file in Odin

    Installing The ROM From Lineage Recovery:
    • Lineage recovery - Factory reset > Factory reset & reset system partitions
    • make sure that all your zip ready for install via OTG/SD card/ADB
    • Lineage recovery - Apply update > Choose from sdcard > select the rom and install it
    • Install magisk .zip (change magisk.apk to magisk.zip if you installing via SD card/OTG)
    • Reboot to system!
    Version Information
    Status: OFFICIAL
    Current Version: February 2022 (12.0.0_r32)
    Stable Release Date: 22/2/2022
    Build author/Device Maintainer: @Orel6505

    Sources&Trees
    Credits
    • @Linux4 - For making the trees and officialy maintaing them in LineageOS, For giving me access to A12 device tree and helping me all time!
    2
    Hi. Thanks a lot for the rom. Works smoothly but I am experiencing very low speaker volume while on calls. Otherwise when watching youtube videos or music the sound is normal.
    Hi. Orel can you please fix this issue? Quite low volume on speaker while on voice calls and even on all video calls. Thank you.
    2
    View attachment 5573697

    Hi,
    The OP says the recovery is on the link together with the rom, but I cannot find it there.
    I noticed @dhhash asked about this, and he was advised to use an old recovery.
    How can we know which one is the right one to be used for this rom? Wouldn't it be better to link the recovery together with the rom, to avoid issues?
    Hi, this is known issue I'll release update soon fix this.
    1
    I just notice after updating to may update Bluetooth calls do not work properly again
    I also have noticed this. When calling via Bluetooth (Sony WH-1000XM3 and car audio system), voices are robotic and completely not understandable. Do you experience the same symptoms? Anyone else having this issue? If so, should we unroll this update and issue a bug report somewhere?