[ROM][Official][5.1.1][Nightly]CyanogenMod 12.1 Nightly for Huawei G620S,Honor 4/4X

[Sh0m1]

One question> when new update comes in about phone> cyanogen update it download all 255mb file, is it possible to get only update file as ota?

Sent from my Che1-L04 using XDA Free mobile app

Try using CyanDelta from play store.
https://play.google.com/store/apps/details?id=com.cyandelta&hl=en

 

[Bharadwaz]

I flashed this ROM , working fine without any issue. but sim contacts are not displaying.

from my Che1-L04

 

[bmasgone]

2.loudspeaker volume is very less usually when activate loudspeaker during a call and while playing recorded voice, whatsapp voices etc but playing music and videos are fine

Yup, almost forgot about these issues.
2. Loudspeaker volume is realy low and recording level, some messenger notifications too...
4. Camera is realy times worse than stock as pictures quality, most noticable indoor. I`m not sure is it issue or CM itself and its libraries, because I`ve got same issue with CM on Huawei Ascend P1. May be on all Huawei phones stock camera and libs are way way way better than this one in CM or any CM bassed ROM.. Huawei developers "touch" camera app and defautl settings for realy best quality.
This low camera quality issue on CM, affects and all other camera apps from Google Play Store. I notice that with stock ROM, camera quality from Google Store apps (not just the stock) is way way way way better than same camera apps in CM.
The only compromise I found is to install through recovery some ported camera with its libs..

 

[bmasgone]

I decreased speaker volume to avoid boom

I assume that this is temprorary decision until you find how to reduce the bass when volume is higher, because I see that this is the problem. AudioFX does nothing to ringtone also.. may be this app affects just headsets..
In stock highest volume is crystal clear and very loud, so CM12.1 needs fixes, the speaker itself have possibilities :fingers-crossed:

 

[dianlujitao]

Thank u so much for the Official CM, got a working and almost stable rom after a long wait, some issues found are
1.poor recieving of wifi signal, need to be closer to router to get proper signal
2.loudspeaker volume is very less usually when activate loudspeaker during a call and while playing recorded voice, whatsapp voices etc but playing music and videos are fine
3.Mobile data is not very stable, some time its not connecting even if its on
4.Camera clarity is low compared to stock camera, yellow colour appears all over the image while click using flash

One question> when new update comes in about phone> cyanogen update it download all 255mb file, is it possible to get only update file as ota?

Sent from my Che1-L04 using XDA Free mobile app

1. It appears only on honor 4x, I may find solution in the future.
2. Maybe already fixed
3. It works fine for me
4. I don't use stock camera hal, so currently I get no solution.
5. CM never provide ota package

 

[dianlujitao]

I assume that this is temprorary decision until you find how to reduce the bass when volume is higher, because I see that this is the problem. AudioFX does nothing to ringtone also.. may be this app affects just headsets..
In stock highest volume is crystal clear and very loud, so CM12.1 needs fixes, the speaker itself have possibilities :fingers-crossed:

Unfortunately not.
Currently I use the same speaker volume with stock.
We got the boom issue, because the volume is too high

 

[bmasgone]

Unfortunately not.
Currently I use the same speaker volume with stock.
We got the boom issue, because the volume is too high

I already restore my B266 backup, but when talk about audio, take attention on low audio recording volume, low loadspeaker volume, when I talk in whatsapp or messenger (may be another voip apps), people says that hear me very quiet, also notifications of these apps seems like to be quiet but I didnt test the issue deeply ..

Nobody success with notifications lights since CM11 until now.. If this is so difficult, why dont you make wokring notification light blinking for all notifications in one color .. May be this would be easy .. or this is complex like compass and should wait for official L kernel sources (may be after new year, may be never) I saw that beta is from July and still nothing new or beta2 at least ..

 

[Bharadwaz]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.​

#include <std_disclaimer.h>

/*
 * Your warranty is now void.
 *
 * We are not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at us for messing up your device, we will laugh at you.
 *
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.

Official CyanogenMod Wiki:https://wiki.cyanogenmod.org/w/Cherry_Info

Important information:
This thread is for official CyanogenMod 12.1 builds for Huawei Honor 4/4X (Qualcomm version). The following will not be supported here:

• Custom kernels
• Mods
• Xposed

We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:

• Flashed a custom kernel
• Installed or did mods from untrusted sources
• Modified system files

Baseband requirement:
Your must install a compatible baseband before CyanogenMod can be installed, or you won't be able to disconnect a call.
Just flash via recovery, you only need to perform the action once
Che1_L04
Che1_CL10
Che1_CL20
C8817D
G620S_UL00
G620S_L01

Known Issues: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_cherry
Bug report: https://jira.cyanogenmod.org

Features:

• Kernel based on official kernel source for Honor 4C(MSM8939), ported to MSM8916, update necessary drivers to QCOM lolipop baseline, and update from v3.10.28 to v3.10.49.
• Many vendor blobs kang from rendang
• Init scripts from Qualcomm's latest baseline: LA.BR.1.2.4-02710-8x16.0
• Use open sourced charger
• Set minium screen backlight to 5
• Fix CPU Hotplug
• Enhance Wifi signal strength (credits: @surdu_petru)
• Fix multi-color battery & notifiction LED
• Fix FLAC playback for some third-party players
• Enable MTP by default
• Add call recording
• Add support for F2FS
• Add PCC calibration interface
• Add vibrator intensity control
• Add double-tap-to-wake
• Add glove mode
• Add HW-based crypto support
• Update CPU gorvenor driver from Qualcomm
• Update thermal driver from Qualcomm
• Update kernel scheduler and related syscalls (sched) from Qualcomm
• Update memory manager from Qualcomm
• Update lowmemorykiller from Qualcomm
• Update bluetooth blobs from rendang
• Enable KSM
• Merge a bunch of kernel updates from Qualcomm baseline (see kernel commit for details)
• Set SELinux to enforcing mode
• If your device have an official lolipop port, please install that before install this CM port.

Supported devices:

• C8817D
• C8817E
• G621-TL00
• G620S-UL00
• G620S-L01
• Che1-CL20
• Che1-CL10
• Che1-L04

Installation:
First time flashing CyanogenMod 12.1 on your device, or coming from another ROM?

1. Download the zip(s)
2. Install a compatible Recovery, e.g., my TWRP with F2FS support: http://forum.xda-developers.com/android/development/recovery-twrp-2-8-7-0-touch-recovery-t3199386
3. Perform a nandroid backup of your current ROM (Optional)
4. Wipe data/factory reset
5. Flash CyanogenMod
6. Optional: Install the Google Apps addon package. OpenGAPPS recommended
7. Reboot

Download:
http://get.cm/?device=cherry

Credits:

• Code Aurora Forum
• CyanogenMod Team
• surdu_petru
• EloYGomeZ
• ivan19871002
• syhost
• zhaochengw
• mandfx
• cofface

XDA:DevDB Information
CyanogenMod, ROM for all devices (see above for details)

Contributors
dianlujitao, surdu_petru
Source Code: https://github.com/cyanogenmod

ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x

Version Information
Status: Nightly

Created 2015-09-17
Last Updated 2015-09-18

Is it possible to make USB OTG support

Sent from my Che1-L04 using XDA Free mobile app

 

[Morphine1]

Thanks for the good work.

Either this one or the mokee one reached to be top roms for our little monster right now.

 

[Raju Mondal]

Never get 100% Full Charged

Hi, @dianlujitao i want to inform you that my phone never get charged fully 100% either it 98% or 99% But never get 100%...
In my phone 98% Charged Complete.. Then it's showing 6 mins until full..
But i put even 30 mins but my phone not charged 100% it's every time stuck in 98% or 99%.. Pls looking forward on it.. Attachment below.
Thanks..

 

[juanro49]

the network name is displayed as #### instead of the network name

Enviado desde mi Huawei G7 mediante Tapatalk

 

[Raju Mondal]

@Madhunath flash the baseband zip for Our Indian model Che1-L04 , That's it..
But no need to flash Baseband zip now.. Bcz Call hanging up issue already fixed in new build.. After 18/9/2015 update cm-12.1-20150918-NIGHTLY-cherry.zip after all latest update call hanging up issue fixed no need to flash Baseband any more..
Thanks to dev @dianlujitao for fixing all issues.. :smile:

---------- Post added at 09:42 PM ---------- Previous post was at 09:37 PM ----------

How to fix call hanging issue?

Directly flash it.
wiping or not doesn't matter

Yeah.. After flashing CM12.1 then flash the Baseband zip..
But in latest build no need to flash Baseband zip anymore as it is already have been fixed :good:

---------- Post added at 10:05 PM ---------- Previous post was at 09:42 PM ----------

I decreased speaker volume to avoid boom, and increased voice call volume

Thank You So much! For hearing me :good:

---------- Post added at 10:11 PM ---------- Previous post was at 10:05 PM ----------

Try using CyanDelta from play store.
https://play.google.com/store/apps/details?id=com.cyandelta&hl=en

Yah m also using it from yesterday.. It's nyc app. It's not only solved my Data, even time too.. This app only download necessary update package instead of big file again.. :good:

---------- Post added at 10:19 PM ---------- Previous post was at 10:11 PM ----------

I flashed this ROM , working fine without any issue. but sim contacts are not displaying.

from my Che1-L04

If won't Showing itself by default.. U need to Import SIM Contacts first. From Contacts settings

 

[surdu_petru]

Hello @Raju Mondal !

Please, maybe this thing, was misunderstood :

Baseband requirement:
Your must install a compatible baseband before CyanogenMod can be installed, or you won't be able to disconnect a call.
Just flash via recovery, you only need to perform the action once

Once you flash the new baseband, you don't need to reflash baseband with every update - baseband is persistent in our device ! Also, if you never installed baseband modem, your device will have Dialer issue !


Best regards !

 

[Raju Mondal]

Thanks for the good work.

Either this one or the mokee one reached to be top roms for our little monster right now.

Yah.. You're right.. Really grate work. Love it, Thanks to @dianlujitao & team for there hard work & Such a wonderful ROM :good:

---------- Post added at 10:48 PM ---------- Previous post was at 10:40 PM ----------

Hello @Raju Mondal !

Please, maybe this thing, was misunderstood :



Once you flash the new baseband, you don't need to reflash baseband with every update - baseband is persistent in our device ! Also, if you never installed baseband modem, your device will have Dialer issue !


Best regards !

Thanks But i flashed Baseband zip for my Che1-L04 only one time.. Then i have to never flash it again.. Even i install Stock Back & then again if i need to Install CM12.1 then If i Wipe Cache, Data, System, Boot then flash CM12.1 then it's working without flashing Baseband zip again.. That's what m taking about

 

[surdu_petru]

Thanks But i flashed Baseband zip for my Che1-L04 only one time.. Then i have to never flash it again.. Even i install Stock Back & then again if i need to Install CM12.1 then If i Wipe Cache, Data, System, Boot then flash CM12.1 then it's working without flashing Baseband zip again.. That's what m taking about

Yes, but if you'll revert to stock Huawei Firmware by installing UPDATE.APP under stock recovery, you'll lose the baseband installed - so only in this case you need to reinstall baseband modem, in order to fix Dialer issue .

I told you this because your post above, say :

But no need to flash Baseband zip now.. Bcz Call hanging up issue already fixed in new build.. After 18/9/2015 update cm-12.1-20150918-NIGHTLY-cherry.zip after all latest update call hanging up issue fixed no need to flash Baseband any more..

And this is not true ... Dialer issue was fixed because you already flashed a baseband modem, and not because was fixed into Nightly rom !

I hope I was clear enough

Best regards !

 

[Raju Mondal]

Yes, but if you'll revert to stock Huawei Firmware by installing UPDATE.APP under stock recovery, you'll lose the baseband installed - so only in this case you need to reinstall baseband modem, in order to fix Dialer issue .

I told you this because your post above, say :



And this is not true ... Dialer issue was fixed because you already flashed a baseband modem, and not because was fixed into Nightly rom !

I hope I was clear enough

Best regards !

Now i get it.. Thanks a lot @surdu_petru for Clear my confusion.. But this issue must should be fixed in some day... As is it not good or permanent way..
It should be fixed in Own ROM.. Thanks :good:

 

[bmasgone]

Where we can see release changes of nightlies?
I mean build to build changes, so everybody could decide when the ROM is ready for daily use of him .. Because is hard to install (its about of time) new nightly every day, start testing and than restore backup and ect ..
Thanks ..

 

[Sh0m1]

Where we can see release changes of nightlies?
I mean build to build changes, so everybody could decide when the ROM is ready for daily use of him .. Because is hard to install (its about of time) new nightly every day, start testing and than restore backup and ect ..
Thanks ..

In cm updater, tap on the nightly you want and it will show you the changelog.

Sent from my G620S-L01 using Tapatalk

 

[dianlujitao]

Hi, @dianlujitao i want to inform you that my phone never get charged fully 100% either it 98% or 99% But never get 100%...
In my phone 98% Charged Complete.. Then it's showing 6 mins until full..
But i put even 30 mins but my phone not charged 100% it's every time stuck in 98% or 99%.. Pls looking forward on it.. Attachment below.
Thanks..

Some one told me the issue, but it's okey for my c8817d, so I have no way to debug

 

[dianlujitao]

the network name is displayed as #### instead of the network name

Enviado desde mi Huawei G7 mediante Tapatalk

You need to update spn of your carrier by yourself: https://github.com/CyanogenMod/andr....1/prebuilt/common/etc/selective-spn-conf.xml

Huawei's modem is not pulling in network operator names for RIL.
The response to RIL_REQUEST_OPERATOR contains #### in place of the
network name. Rely on selective-spn-conf.xml which is provided by
vendor/cm as the primary source of network names. SPNs which do not
exist in this reference fall-back to the result from RIL.