[ROM][OFFICIAL][7.1.2] AOSP-JDC by JDCTeam - 24/Jan/2018

[CheckYourScreen]

Updated to Build 21/08

Much Awaited Update Finally Available!!
Updated with following changes: Clean Flash Highly Recommended!!

• Updated to New Rebased Arsenic Kernel (based on Latest CAF Tag with latest MM OOS 3.1.4 Changes)
• Dropped Adreno idler in favour of 27Mhz freq for GPU
• Dropped Voltage Control
• Merged all CVE and Security Patches Till date in Kernel.
• August Security Patches in ROM
• Fixed 100% Battery stuck issue in new Rebased Kernel
• Fixed USB-MTP random reboot issue
• Fixed HEVC Decoder issue (hw/hw+ decoder playback works and green/pink tint issue fixed too)
• Enabled persist sepolicy
• Enabled Charger Suspend
• Added Charger Monitor Service to keep a track of current Battery Temp while charging and discharging (Device will be much cool as compare to old kernel)
• Fixed Bluetooth MAC Generation
• Increased Recording Volume/Mic Gain
• Enabled Various Audio Features supported by our device
• Updated Kernel tags and ramdisk offset for faster boot
• Removed loc_api from gps
• Dropped Camera2 in favour of Oneplus Camera
• Added Blur feature
• Compiled with Latest SnapDragon Clang
• Rest ROM related changelog in About section of Settings..

Imp. Note: From now on This ROM will Ship with Rebased Arsenic Kernel so make sure you only flash the zip of Rebased Edition only!!
Separate zip will be provided for it on the Arsenic Thread!

Best Build So Far!!
Fixed all remaining issues including some ancient ones like HEVC playback issues etc..
Voltage Control has been dropped from Rebased Kernel due to some personal reasons and wont be added, I do not recommend playing with voltage values as its dangerous and also affects UX (Though it might appear in future builds if i get good amount of requests for it).

PS- A new update of kernel will be available to address one critical CVE patch, zip will be provided in Arsenic Kernel's Thread shortly!
Happy Flashing!!

 

[Kaconk]

@CheckYourScreen Is it fine with dirty flash over latest build? Thx

 

[naa2773]

@CheckYourScreen Is it fine with dirty flash over latest build? Thx

He's already made it clear what his opinion is. Dirty flashing the same ROM is always safe to try (though you should definitely backup first), but if you get issues don't report anything until you've done a clean flash.

 

[TECCC]

noooooooooooooo now i am on work without data volume and have to wait until i could try the new build , what a pitty
exicted for testing in few hours , thx for new build

 

[TRuth14]

Gonna flash it via OTA updater on the setting, it's like I'm using the official rom from oneplus lol.

 

[GoogleLover75]

Much Awaited Update Finally Available!!
Updated with following changes: Clean Flash Highly Recommended!!


Imp. Note: From now on This ROM will Ship with Rebased Arsenic Kernel so make sure you only flash the zip of Rebased Edition only!!
Separate zip will be provided for it on the Arsenic Thread!

Best Build So Far!!
Fixed all remaining issues including some ancient ones like HEVC playback issues etc..
Voltage Control has been dropped from Rebased Kernel due to some personal reasons and wont be added, I do not recommend playing with voltage values as its dangerous and also affects UX (Though it might appear in future builds if i get good amount of requests for it).

PS- A new update of kernel will be available to address one critical CVE patch, zip will be provided in Arsenic Kernel's Thread shortly!
Happy Flashing!!

Does it now support on-screen navigation keys (as opposed to hardware keys)?

 

[ERRORR2]

Much Awaited Update Finally Available!!
Updated with following changes:

• Dropped Camera2 in favour of Oneplus Camera

Camera2 is still there after clean flash.

 

[granazis]

Much Awaited Update Finally Available!!
Updated with following changes: Clean Flash Highly Recommended!!


Imp. Note: From now on This ROM will Ship with Rebased Arsenic Kernel so make sure you only flash the zip of Rebased Edition only!!
Separate zip will be provided for it on the Arsenic Thread!

Best Build So Far!!
Fixed all remaining issues including some ancient ones like HEVC playback issues etc..
Voltage Control has been dropped from Rebased Kernel due to some personal reasons and wont be added, I do not recommend playing with voltage values as its dangerous and also affects UX (Though it might appear in future builds if i get good amount of requests for it).

PS- A new update of kernel will be available to address one critical CVE patch, zip will be provided in Arsenic Kernel's Thread shortly!
Happy Flashing!!

MANY THANKS once more Nimit for your haaard and excellent work,we are proud about you!!!
Best regards,Christos.

 

[CheckYourScreen]

Does it now support on-screen navigation keys (as opposed to hardware keys)?

Not as of now, scroll few pages for the build.prop workaround..

Camera2 is still there after clean flash.

Oops :silly:

 

[GoogleLover75]

Not as of now, scroll few pages for the build.prop workaround..

I don't need to scroll back. Trust me, I've read every single post of this thread and I'm well aware of this workaround, but the build.prop trick requires root, which is a bummer to me (plus, I'm not really into fiddling in config files).

Anyway, I guess I'll have to hang in tight with my stock OxygenOS 3.1.4 for now until the next release comes out with a flip switch for software buttons (fingers crossed...)

 

[azerty07]

Hello guys ! First of all, thank you so much for this awesome Rom !

I would like to update it, but I m not sure about the best way to keep my apps (and my settings as they are now if possible) when I am doing a clean flash.. Can someone help me about this please ? Thaaaanks !

 

[TECCC]

Rom is fine as i thought , great work only thins i changed are navkeys via editing build.prop, increased mic volume in mixer_path , line 1492 from 13 to 17 but is my personally preference and switched to snapcamera cause i hate camera apps in fullscreen mode where you have to swipe to got the navkeys.

one question for the rebased kernel in latest build, i am still using following settings
govenor: impulse
max cpu freq: 1497mhz
min cpu freg: 300mhz
Sync treshold: 652mhz
Input boost: 422mhz
I am good to go with these settings for good battery life , or should change the governor ?

best regards

 

[sushil3629]

Hello guys ! First of all, thank you so much for this awesome Rom !

I would like to update it, but I m not sure about the best way to keep my apps (and my settings as they are now if possible) when I am doing a clean flash.. Can someone help me about this please ? Thaaaanks !

Titanium backup (Root required)

 

[aryaraj]

The only con that is annoying (at least for me)-

The call duration is inaccurate. It starts from some 10 15 seconds

 

[bagufix]

Aptx HD is supported?

 

[anuragpv]

The best ROM for Onyx has only got better! Thanks @CheckYourScreen for the ROM, kernel and support.

My only cringe would be the inaccurate call duration and lack of 'vibrate on call connect' feature.

 

[CheckYourScreen]

Hello guys ! First of all, thank you so much for this awesome Rom !

I would like to update it, but I m not sure about the best way to keep my apps (and my settings as they are now if possible) when I am doing a clean flash.. Can someone help me about this please ? Thaaaanks !

Titanium backup is the best solution, you can first try disabling all substratum theme overlays then dirty flashing the new update, if you face any issues then clean flash.

Rom is fine as i thought , great work only thins i changed are navkeys via editing build.prop, increased mic volume in mixer_path , line 1492 from 13 to 17 but is my personally preference and switched to snapcamera cause i hate camera apps in fullscreen mode where you have to swipe to got the navkeys.

one question for the rebased kernel in latest build, i am still using following settings
govenor: impulse
max cpu freq: 1497mhz
min cpu freg: 300mhz
Sync treshold: 652mhz
Input boost: 422mhz
I am good to go with these settings for good battery life , or should change the governor ?

best regards

No need to install kernel adiutor, rom is already shioped with best kernel settings preconfigured which might even give you better backup.

Aptx HD is supported?

Nope, only aptx. You can add the lib and build.prop lines manually if you want or wait for next release.

 

[azerty07]

Titanium backup is the best solution, you can first try disabling all substratum theme overlays then dirty flashing the new update, if you face any issues then clean flash.

Thank you @CheckYourScreen !

 

[Privod]

On this firmware, does the phone shoot video in the dark at normal frame rates or on OxygenOS? And another question, who tried to install this firmware https://www.xda-developers.com/google-camera-hdr-ported/ or will it not work?

 

[Dizzyrul3z]

On this firmware, does the phone shoot video in the dark at normal frame rates or on OxygenOS? And another question, who tried to install this firmware https://www.xda-developers.com/google-camera-hdr-ported/ or will it not work?

Google camera with new api is only for >SD820. There is a magisk module that activate this new api. You can try and give us youre opinion :good:
https://forum.xda-developers.com/apps/magisk/module-camera2api-enabler-t3656651