• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [OFFICIAL] [7.1.2] [madOS] - Coolpad Note3

Search This thread

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,636
This is a Official Build of madOS ( based on AOSP N ) for Coolpad Note3 with MTK 6753 SoC
Build for Note 3 lite coming after 15th July (I am going to be on vacations till then)
madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.​

Et8LITg.png

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

Installation Instructions:

Working:
  • Smartwake
  • RIL (Calls /SMS, Data connection)
  • Wifi
  • Bluetooth
  • Audio / Mediaserver
  • Sensors
  • Lights
  • Both storages & MTP
  • HW de/encoding
  • Camera
  • GPS
  • Audio recorder
  • Camcorder
  • Fm Radio

Not working:
  • VoLte
  • tell us

Contributors
superdragonpt, DerTeufel1980, fire855
Source Code: https://github.com/MediatekAndroidDevelopers

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.18.x
Based On: AOSP

Version Information
Status: Stable

Created 2017-05-31
Last Updated 2017-05-31



XDA:DevDB Information
madOS_coolpad_note3, ROM for all devices (see above for details)

Contributors
DerTeufel1980, fire855, superdragonpt
Source Code: https://github.com/MediatekAndroidDevelopers

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: custom recovery installed
Based On: AOSP

Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-07-07

Created 2017-07-07
Last Updated 2017-07-07
 

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,636
For full performance, I suggest flashing twrp, then reboot to recovery and format data and cache to f2fs filesystem.
Attention! This is going to delete your internal sdcard as well. Please backup everything before.

After this, install rom and gapps as usual.

Of course, you can format back to ext4 or to f2fs at any time, but you'll again loose all files, stored on the phone.

Gesendet von meinem H5000 mit Tapatalk
 

alhemitel

Member
May 18, 2017
9
0
49
Kyiv
For full performance, I suggest flashing twrp, then reboot to recovery and format data and cache to f2fs filesystem.
Attention! This is going to delete your internal sdcard as well. Please backup everything before.

After this, install rom and gapps as usual.

Of course, you can format back to ext4 or to f2fs at any time, but you'll again loose all files, stored on the phone.

Gesendet von meinem H5000 mit Tapatalk

Excellent work
 

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,636
Jul 6, 2017
22
9
Coolpad note 3 bugs

Thanks i installed rom it is so good but some bugs are there
1. I did not find update app
then who i will get ota update.
2. Pattern lock is not responding and only swipe is working.
3. Fp lock is not working .
This are the bugs i found till now but our rom is so good i like it .thanks very much .
 

kubersharma

Recognized Developer
Dec 30, 2015
1,171
5,593
New Delhi , India
Thanks i installed rom it is so good but some bugs are there
1. I did not find update app
then who i will get ota update.
2. Pattern lock is not responding and only swipe is working.
3. Fp lock is not working .
This are the bugs i found till now but our rom is so good i like it .thanks very much .

First flash Official Marshmallow i.e CoolUI 8 and after that boot into system , now reboot to TWRP and flash any 3.18.xx based Rom Fingerprint will work ( if Rom supports FP ) in this case flash MadOS
 
  • Like
Reactions: DerTeufel1980
Jul 6, 2017
22
9
Bugs in rom

After using for 2 hours all are working fine and mtp is also working but some bugs pattern lock is not working and fp lock and i did not find update app who i will get feature update (ota) .even battery also so good .camera is also good front and bask .thanks very much .some times settings app not responding .
 

DerTeufel1980

Inactive Recognized Developer
Jul 31, 2011
10,302
27,636
After using for 2 hours all are working fine and mtp is also working but some bugs pattern lock is not working and fp lock and i did not find update app who i will get feature update (ota) .even battery also so good .camera is also good front and bask .thanks very much .some times settings app not responding .
You should not only ask, but also read the answers provided above...

Gesendet von meinem H5000 mit Tapatalk
 

Top Liked Posts

  • There are no posts matching your filters.
  • 18
    This is a Official Build of madOS ( based on AOSP N ) for Coolpad Note3 with MTK 6753 SoC
    Build for Note 3 lite coming after 15th July (I am going to be on vacations till then)
    madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.​

    Et8LITg.png

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    Installation Instructions:

    Working:
    • Smartwake
    • RIL (Calls /SMS, Data connection)
    • Wifi
    • Bluetooth
    • Audio / Mediaserver
    • Sensors
    • Lights
    • Both storages & MTP
    • HW de/encoding
    • Camera
    • GPS
    • Audio recorder
    • Camcorder
    • Fm Radio

    Not working:
    • VoLte
    • tell us

    Contributors
    superdragonpt, DerTeufel1980, fire855
    Source Code: https://github.com/MediatekAndroidDevelopers

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.18.x
    Based On: AOSP

    Version Information
    Status: Stable

    Created 2017-05-31
    Last Updated 2017-05-31



    XDA:DevDB Information
    madOS_coolpad_note3, ROM for all devices (see above for details)

    Contributors
    DerTeufel1980, fire855, superdragonpt
    Source Code: https://github.com/MediatekAndroidDevelopers

    ROM OS Version: 7.x Nougat
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: custom recovery installed
    Based On: AOSP

    Version Information
    Status: Stable
    Current Stable Version: 1.1
    Stable Release Date: 2017-07-07

    Created 2017-07-07
    Last Updated 2017-07-07
    10
    Reserved

    Volte: we're working on it, and progress has been made already. As soon as it is working, we'll let you know.
    We can't tell any date for it.
    5
    Is the rom oms integrated??
    Yes
    M.A.D. Team, if you can get us Volte working, you will truly become Legendary Heroic Developers who can do anything. Hats off and my salute. :)
    I think it's just a matter of time. The switch is already showing up on my test... Just no data connection available [emoji14]

    Gesendet von meinem H5000 mit Tapatalk
    4
    New 8.1 madOS available now

    https://forum.xda-developers.com/showthread.php?t=3728028

    Sent from my uhans h5000, running Android 8.0.0
    4
    For full performance, I suggest flashing twrp, then reboot to recovery and format data and cache to f2fs filesystem.
    Attention! This is going to delete your internal sdcard as well. Please backup everything before.

    After this, install rom and gapps as usual.

    Of course, you can format back to ext4 or to f2fs at any time, but you'll again loose all files, stored on the phone.

    Gesendet von meinem H5000 mit Tapatalk