[ROM][OFFICIAL][7.1.2][Note2/n7100][OPTIMIZED]RESURRECTION REMIX [5.8.0]

[velocityra]

camera (still) doesn't work

I tried flashing the latest RR version posted above (5.8.5-20180420) and I'm getting the same error...

I know for a fact the camera worked fine before flashing the custom ROM, so it's not a hw failure.

Any help, please?

 

[ishtiak02]

I tried flashing the latest RR version posted above (5.8.5-20180420) and I'm getting the same error...

I know for a fact the camera worked fine before flashing the custom ROM, so it's not a hw failure.

Any help, please?

It's a mediaserver issue. Either kill mediaserver every time it occurs or
Go to /system/vendor/firmware on your phone and copy all files starting with "Slim blah blah blah". Paste them to your /data/cfw folder

 

[Santhosh05]

Awaiting RR-Oreo

Hey Hibin,
Its been a while and just wanted to know if you have any updates on RR-Oreo for Note 2.

Hope you haven't forgotten us

Regards,

 

[sonic_ear]

Long time no see

 

[galanos]

thanks

 

[suleymanbilgin]

Thanks, I found this and you sent happy to me.

 

[PetrSP7]

RR-N-v5.8.5-20171206-n7100-Final

Hello from Prague, CZ! From the last week I am on RR-N-v5.8.5-20171206-n7100-Final, device GT-N7100 global version. ROM seems nice and working perfectly, only one issue I am not able to improve: the sound of built-in loudspeaker (not the earpiece !) is too weak now, comparing with the sound before. It was very very loud with the stock ROM. I suppose the sound has something to do with the file /etc/sound/t03g ... I have increased the value in speaker section from 59, but the only effect was no sound. In addition, it will be helpful to increase headphones out output as well, on hi-dynamic recordings is the (average) possible level low as well. Does anybody have some idea to improve those two things - speaker and earphone out volume? On stock Samsung ROM (rooted) that was very simple to do by text-editing the respective file ... Thanks a lot in advance !!!
HERE IS MENTIONED FILE:
<!-- TinyHAL configuration file for Samsung Galaxy Note II -->
<tinyhal>
<!--
We are able to have most of our routing static so do that
-->
<path>
<!-- do not change the adc & dac source of AIF2 -->
<ctl name="AIF2DACL Source" val="0"/>
<ctl name="AIF2DACR Source" val="0"/>
<ctl name="AIF2ADCL Source" val="0"/>
<ctl name="AIF2ADCR Source" val="1"/>

<!-- AIF1->DAC1 -->
<ctl name="DAC1 Switch" val="1"/>

<!-- general -->
<ctl name="IN1L ZC Switch" val="0"/>
<ctl name="IN1R ZC Switch" val="0"/>
<ctl name="IN2L ZC Switch" val="0"/>
<ctl name="IN2R ZC Switch" val="0"/>
<ctl name="Output ZC Switch" val="0"/>
<ctl name="Speaker ZC Switch" val="0"/>
<ctl name="Headphone ZC Switch" val="0"/>

<!-- AIF1->DAC1 -->
<ctl name="DAC1L Mixer AIF1.1 Switch" val="1"/>
<ctl name="DAC1R Mixer AIF1.1 Switch" val="1"/>
<ctl name="DAC1 Switch" val="1"/>

<!-- ADC->AIF2 -->
<ctl name="AIF2DAC2L Mixer Left Sidetone Switch" val="1"/>
<ctl name="AIF2DAC2L Mixer Right Sidetone Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer Left Sidetone Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer Right Sidetone Switch" val="1"/>
<ctl name="DAC2 Left Sidetone Volume" val="12"/>
<ctl name="DAC2 Right Sidetone Volume" val="12"/>
<ctl name="DAC2 Switch" val="1"/>

<!-- DAC1->HP -->
<ctl name="Left Headphone Mux" val="Mixer"/>
<ctl name="Right Headphone Mux" val="Mixer"/>

<!-- DAC1->SPKL/R->SPKL/R Boost->SPK -->
<ctl name="SPKL DAC1 Switch" val="1"/>
<ctl name="SPKR DAC1 Switch" val="1"/>
<ctl name="SPKL Boost SPKL Switch" val="1"/>
<ctl name="SPKL Boost SPKR Switch" val="1"/>
<ctl name="SPKR Boost SPKL Switch" val="0"/>
<ctl name="SPKR Boost SPKR Switch" val="0"/>
<ctl name="Speaker Mixer Volume" val="3"/>

<!-- DAC->Output mixer->Earpiece -->
<ctl name="Left Output Mixer DAC Switch" val="1"/>
<ctl name="Right Output Mixer DAC Switch" val="1"/>
<ctl name="Earpiece Mixer Left Output Switch" val="1"/>
<ctl name="Earpiece Mixer Right Output Switch" val="1"/>
<ctl name="Earpiece Switch" val="1"/>

<!-- LINEOUT -->
<ctl name="LINEOUT2N Mixer Left Output Switch" val="1"/>
<ctl name="LINEOUT2P Mixer Right Output Switch" val="1"/>
<ctl name="LINEOUT1N Mixer Right Output Switch" val="1"/>
<ctl name="LINEOUT1P Mixer Left Output Switch" val="1"/>

<!-- Input mixer->ADC->AIF1.1 -->
<ctl name="AIF1ADC1L Mixer ADC/DMIC Switch" val="1"/>
<ctl name="AIF1ADC1R Mixer ADC/DMIC Switch" val="1"/>

<!-- Main Mic->IN1LP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN1L PGA IN1LP Switch" val="1"/>
<ctl name="IN1L PGA IN1LN Switch" val="1"/>
<ctl name="MIXINL IN1L Volume" val="1"/>
<ctl name="IN1L Switch" val="1"/>

<!-- Sub Mic->IN1RP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN1R PGA IN1RP Switch" val="1"/>
<ctl name="IN1R PGA IN1RN Switch" val="1"/>
<ctl name="MIXINR IN1R Volume" val="1"/>
<ctl name="IN1R Switch" val="1"/>

<!-- FM Radio->IN2RP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN2R PGA IN2RP Switch" val="1"/>
<ctl name="IN2R PGA IN2RN Switch" val="1"/>
<ctl name="MIXINR IN2R Volume" val="1"/>
<ctl name="IN2R Switch" val="1"/>

<!-- Ear Mic->IN2LP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN2L PGA IN2LP Switch" val="1"/>
<ctl name="IN2L PGA IN2LN Switch" val="1"/>
<ctl name="MIXINL IN2L Volume" val="1"/>
<ctl name="IN2L Switch" val="1"/>

<!-- Input mixer->ADC->AIF1 -->
<ctl name="AIF1ADC1L Mixer ADC/DMIC Switch" val="1"/>
<ctl name="AIF1ADC1R Mixer ADC/DMIC Switch" val="1"/>
<ctl name="ADCL Mux" val="ADC"/>

<!-- HPF on to take out some bounce -->
<ctl name="Sidetone HPF Switch" val="0"/>

<!-- Work around core issue -->
<ctl name="ADCL Mux" val="DMIC"/>
<ctl name="ADCL Mux" val="ADC"/>
<ctl name="ADCR Mux" val="DMIC"/>
<ctl name="ADCR Mux" val="ADC"/>

<!-- AIF2ADCDAT to AIF3ADC mux -->
<ctl name="AIF3ADC Mux" val="1"/>

<!-- Default all outputs off -->
<ctl name="HP Switch" val="0"/>
<ctl name="SPK Switch" val="0"/>
<ctl name="RCV Switch" val="0"/>
<ctl name="LINE Switch" val="0"/>
<ctl name="HDMI Switch" val="0"/>

<!-- Default all inputs off -->
<ctl name="Main Mic Switch" val="0"/>
<ctl name="Sub Mic Switch" val="0"/>
<ctl name="Headset Mic Switch" val="0"/>
<ctl name="FM In Switch" val="0"/>

<!-- EQ Switches -->
<ctl name="AIF1DAC1 EQ Switch" val="1"/>
<ctl name="AIF1DAC1 EQ1 Volume" val="9"/>
<ctl name="AIF1DAC1 EQ2 Volume" val="7"/>
<ctl name="AIF1DAC1 EQ3 Volume" val="10"/>
<ctl name="AIF1DAC1 EQ4 Volume" val="13"/>
<ctl name="AIF1DAC1 EQ5 Volume" val="12"/>

</path>
<device name="speaker">
<path name="on">
<ctl name="SPK Switch" val="1"/>
<ctl name="AIF1DAC1 Volume" val="98"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="DAC1 Volume" val="98"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
<ctl name="SPKL DAC1 Volume" val="1"/>
<ctl name="SPKR DAC1 Volume" val="1"/>
<ctl name="Speaker Mixer Volume" val="3"/>
<ctl name="Speaker Boost Volume" val="4"/>
<ctl name="Speaker Volume" val="59"/>
</path>
<path name="off">
<ctl name="SPK Switch" val="0"/>
<ctl name="Speaker Mixer Volume" val="1"/>
<ctl name="Speaker Volume" val="0"/>
</path>
</device>
<device name="earpiece">
<path name="on">
<ctl name="RCV Switch" val="1"/>
<ctl name="AIF2DAC2L Mixer AIF2 Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer AIF2 Switch" val="0"/>
<ctl name="AIF2ADC HPF Mode" val="1"/>
<ctl name="AIF2ADC HPF Switch" val="1"/>
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF2DAC Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="1"/>
<ctl name="AIF2 Boost Volume" val="1"/>
<ctl name="DAC1 Volume" val="96"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
<ctl name="Output Volume" val="60"/>
<ctl name="Earpiece Volume" val="1"/>
</path>
<path name="off">
<ctl name="RCV Switch" val="0"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="AIF2 Boost Volume" val="0"/>
<ctl name="Output Volume" val="57"/>
</path>
</device>
<device name="headphone">
<path name="on">
<ctl name="HP Switch" val="1"/>
<ctl name="Headphone Volume" val="50"/>
<ctl name="Headphone ZC Switch" val="0"/>
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="DAC1 Volume" val="96"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
</path>
<path name="off">
<ctl name="HP Switch" val="0"/>
</path>
</device>
<device name="sco-out">
<path name="on">
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="AIF3ADC Mux" val="1"/>
<ctl name="AIF2ADC HPF Mode" val="3"/>
<ctl name="AIF2ADC HPF Switch" val="1"/>
<ctl name="AIF2DAC2L Mixer AIF1.1 Switch" val="1"/>
<ctl name="AIF2DAC2R Mixer AIF1.1 Switch" val="1"/>
<ctl name="AIF2DAC Volume" val="96"/>
<ctl name="AIF2ADC Volume" val="96"/>
<ctl name="DAC2 Volume" val="96"/>
</path>
<path name="off">
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="DAC2 Volume" val="96"/>
<ctl name="AIF2ADC Volume" val="96"/>
<ctl name="AIF2DAC2L Mixer AIF1.1 Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer AIF1.1 Switch" val="0"/>
</path>
</device>
<device name="analogue-dock">
<path name="on">
<ctl name="LINEOUT2N Switch" val="1"/>
<ctl name="LINEOUT2P Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Left Output Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Right Output Switch" val="0"/>
<ctl name="LINEOUT2P Mixer Right Output Switch" val="1"/>
<ctl name="LINE Switch" val="1"/>
<ctl name="LineoutSwitch Mode" val="1"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
</path>
<path name="off">
<ctl name="LineoutSwitch Mode" val="0"/>
<ctl name="LINEOUT2N Switch" val="0"/>
<ctl name="LINEOUT2P Switch" val="0"/>
<ctl name="LINE Switch" val="0"/>
</path>
</device>
<device name="digital-dock">
<path name="on">
<ctl name="LINEOUT2N Switch" val="1"/>
<ctl name="LINEOUT2P Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Left Output Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Right Output Switch" val="0"/>
<ctl name="LINEOUT2P Mixer Right Output Switch" val="1"/>
<ctl name="LINE Switch" val="1"/>
<ctl name="LineoutSwitch Mode" val="1"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
</path>
<path name="off">
<ctl name="LineoutSwitch Mode" val="0"/>
<ctl name="LINEOUT2N Switch" val="0"/>
<ctl name="LINEOUT2P Switch" val="0"/>
<ctl name="LINE Switch" val="0"/>
</path>
</device>
<device name="aux-digital">
<path name="on">
<ctl name="LINEOUT1N Switch" val="1"/>
<ctl name="LINEOUT1P Switch" val="1"/>
<ctl name="HDMI Switch" val="1"/>
</path>
<path name="off">
<ctl name="LINEOUT1N Switch" val="0"/>
<ctl name="LINEOUT1P Switch" val="0"/>
<ctl name="HDMI Switch" val="0"/>
</path>
</device>
<device name="builtin-mic">
<path name="on">
<ctl name="Main Mic Switch" val="1"/>
<ctl name="MainMicBias Mode" val="1"/>
<ctl name="IN2L Volume" val="22"/>
<ctl name="MIXINL IN2L Switch" val="1"/>
<ctl name="MIXINL IN2L Volume" val="1"/>
<ctl name="AIF1ADCL Source" val="Left"/>
<ctl name="AIF1ADCR Source" val="Left"/>
<ctl name="AIF1ADC1R Mixer ADC/DMIC Switch" val="1"/>
<ctl name="AIF1ADC1 HPF Mode" val="1"/>
<ctl name="AIF1ADC1 HPF Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
</path>
<path name="off">
<ctl name="Main Mic Switch" val="0"/>
<ctl name="MainMicBias Mode" val="0"/>
<ctl name="MIXINL IN2L Switch" val="0"/>
</path>
</device>
<device name="back-mic">
<path name="on">
<ctl name="Sub Mic Switch" val="1"/>
<ctl name="SubMicBias Mode" val="1"/>
<ctl name="IN1R Volume" val="22"/>
<ctl name="MIXINR IN1R Switch" val="1"/>
<ctl name="MIXINR IN1R Volume" val="1"/>
<ctl name="AIF1ADCR Source" val="1"/>
<ctl name="AIF1ADC1 HPF Mode" val="1"/>
<ctl name="AIF1ADC1 HPF Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
</path>
<path name="off">
<ctl name="Sub Mic Switch" val="0"/>
<ctl name="SubMicBias Mode" val="0"/>
<ctl name="MIXINR IN1R Switch" val="0"/>
<ctl name="IN1R Volume" val="10"/>
</path>
</device>
<device name="headset-in">
<path name="on">
<ctl name="MIXINL IN2L Switch" val="0"/>
<ctl name="MIXINR IN1R Switch" val="0"/>
<ctl name="Headset Mic Switch" val="1"/>
<ctl name="AIF1ADCL Source" val="0"/>
<ctl name="AIF1ADCR Source" val="0"/>
<ctl name="AIF2ADCL Source" val="0"/>
<ctl name="AIF1ADCL Source" val="Left"/>
<ctl name="AIF1ADCL Source" val="Right"/>
<ctl name="IN1L Volume" val="22"/>
<ctl name="MIXINL IN1L Switch" val="1"/>
<ctl name="MIXINL IN1L Volume" val="1"/>
<ctl name="AIF1ADC1 HPF Mode" val="1"/>
<ctl name="AIF1ADC1 HPF Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
</path>
<path name="off">
<ctl name="Headset Mic Switch" val="0"/>
<ctl name="MIXINL IN1L Switch" val="0"/>
</path>
</device>
<device name="sco-in">
<path name="on">
<ctl name="AIF2ADC Mux" val="1"/>
<ctl name="AIF2ADC HPF Mode" val="3"/>
<ctl name="AIF2ADC HPF Switch" val="1"/>
<ctl name="AIF1ADCL Source" val="0"/>
<ctl name="AIF1ADCR Source" val="1"/>
<ctl name="AIF1ADC1R Mixer AIF2 Switch" val="1"/>
<ctl name="AIF1ADC1L Mixer AIF2 Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
<ctl name="AIF2DAC Volume" val="96"/>
</path>
<path name="off">
<ctl name="AIF2ADC Mux" val="0"/>
<ctl name="AIF1ADC1R Mixer AIF2 Switch" val="0"/>
<ctl name="AIF1ADC1L Mixer AIF2 Switch" val="0"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
<ctl name="AIF2DAC Volume" val="96"/>
</path>
</device>
<device name="fmradio">
<path name="on">
<ctl name="DAC1L Mixer AIF1.1 Switch" val="1"/>
<ctl name="DAC1L Mixer AIF1.1 Switch" val="1"/>
</path>
<path name="off">
<ctl name="MIXINL Output Record Volume" val="0"/>
<ctl name="MIXINR Output Record Volume" val="0"/>
</path>
</device>
</tinyhal>

 

[mzj4213]

Hello from Prague, CZ! From the last week I am on RR-N-v5.8.5-20171206-n7100-Final, device GT-N7100 global version. ROM seems nice and working perfectly, only one issue I am not able to improve: the sound of built-in loudspeaker (not the earpiece !) is too weak now, comparing with the sound before. It was very very loud with the stock ROM. I suppose the sound has something to do with the file /etc/sound/t03g ... I have increased the value in speaker section from 59, but the only effect was no sound. In addition, it will be helpful to increase headphones out output as well, on hi-dynamic recordings is the (average) possible level low as well. Does anybody have some idea to improve those two things - speaker and earphone out volume? On stock Samsung ROM (rooted) that was very simple to do by text-editing the respective file ... Thanks a lot in advance !!!
HERE IS MENTIONED FILE:
<!-- TinyHAL configuration file for Samsung Galaxy Note II -->
<tinyhal>
<!--
We are able to have most of our routing static so do that
-->
<path>
<!-- do not change the adc & dac source of AIF2 -->
<ctl name="AIF2DACL Source" val="0"/>
<ctl name="AIF2DACR Source" val="0"/>
<ctl name="AIF2ADCL Source" val="0"/>
<ctl name="AIF2ADCR Source" val="1"/>

<!-- AIF1->DAC1 -->
<ctl name="DAC1 Switch" val="1"/>

<!-- general -->
<ctl name="IN1L ZC Switch" val="0"/>
<ctl name="IN1R ZC Switch" val="0"/>
<ctl name="IN2L ZC Switch" val="0"/>
<ctl name="IN2R ZC Switch" val="0"/>
<ctl name="Output ZC Switch" val="0"/>
<ctl name="Speaker ZC Switch" val="0"/>
<ctl name="Headphone ZC Switch" val="0"/>

<!-- AIF1->DAC1 -->
<ctl name="DAC1L Mixer AIF1.1 Switch" val="1"/>
<ctl name="DAC1R Mixer AIF1.1 Switch" val="1"/>
<ctl name="DAC1 Switch" val="1"/>

<!-- ADC->AIF2 -->
<ctl name="AIF2DAC2L Mixer Left Sidetone Switch" val="1"/>
<ctl name="AIF2DAC2L Mixer Right Sidetone Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer Left Sidetone Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer Right Sidetone Switch" val="1"/>
<ctl name="DAC2 Left Sidetone Volume" val="12"/>
<ctl name="DAC2 Right Sidetone Volume" val="12"/>
<ctl name="DAC2 Switch" val="1"/>

<!-- DAC1->HP -->
<ctl name="Left Headphone Mux" val="Mixer"/>
<ctl name="Right Headphone Mux" val="Mixer"/>

<!-- DAC1->SPKL/R->SPKL/R Boost->SPK -->
<ctl name="SPKL DAC1 Switch" val="1"/>
<ctl name="SPKR DAC1 Switch" val="1"/>
<ctl name="SPKL Boost SPKL Switch" val="1"/>
<ctl name="SPKL Boost SPKR Switch" val="1"/>
<ctl name="SPKR Boost SPKL Switch" val="0"/>
<ctl name="SPKR Boost SPKR Switch" val="0"/>
<ctl name="Speaker Mixer Volume" val="3"/>

<!-- DAC->Output mixer->Earpiece -->
<ctl name="Left Output Mixer DAC Switch" val="1"/>
<ctl name="Right Output Mixer DAC Switch" val="1"/>
<ctl name="Earpiece Mixer Left Output Switch" val="1"/>
<ctl name="Earpiece Mixer Right Output Switch" val="1"/>
<ctl name="Earpiece Switch" val="1"/>

<!-- LINEOUT -->
<ctl name="LINEOUT2N Mixer Left Output Switch" val="1"/>
<ctl name="LINEOUT2P Mixer Right Output Switch" val="1"/>
<ctl name="LINEOUT1N Mixer Right Output Switch" val="1"/>
<ctl name="LINEOUT1P Mixer Left Output Switch" val="1"/>

<!-- Input mixer->ADC->AIF1.1 -->
<ctl name="AIF1ADC1L Mixer ADC/DMIC Switch" val="1"/>
<ctl name="AIF1ADC1R Mixer ADC/DMIC Switch" val="1"/>

<!-- Main Mic->IN1LP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN1L PGA IN1LP Switch" val="1"/>
<ctl name="IN1L PGA IN1LN Switch" val="1"/>
<ctl name="MIXINL IN1L Volume" val="1"/>
<ctl name="IN1L Switch" val="1"/>

<!-- Sub Mic->IN1RP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN1R PGA IN1RP Switch" val="1"/>
<ctl name="IN1R PGA IN1RN Switch" val="1"/>
<ctl name="MIXINR IN1R Volume" val="1"/>
<ctl name="IN1R Switch" val="1"/>

<!-- FM Radio->IN2RP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN2R PGA IN2RP Switch" val="1"/>
<ctl name="IN2R PGA IN2RN Switch" val="1"/>
<ctl name="MIXINR IN2R Volume" val="1"/>
<ctl name="IN2R Switch" val="1"/>

<!-- Ear Mic->IN2LP/N->Input Mixer with +30dB at mixer -->
<ctl name="IN2L PGA IN2LP Switch" val="1"/>
<ctl name="IN2L PGA IN2LN Switch" val="1"/>
<ctl name="MIXINL IN2L Volume" val="1"/>
<ctl name="IN2L Switch" val="1"/>

<!-- Input mixer->ADC->AIF1 -->
<ctl name="AIF1ADC1L Mixer ADC/DMIC Switch" val="1"/>
<ctl name="AIF1ADC1R Mixer ADC/DMIC Switch" val="1"/>
<ctl name="ADCL Mux" val="ADC"/>

<!-- HPF on to take out some bounce -->
<ctl name="Sidetone HPF Switch" val="0"/>

<!-- Work around core issue -->
<ctl name="ADCL Mux" val="DMIC"/>
<ctl name="ADCL Mux" val="ADC"/>
<ctl name="ADCR Mux" val="DMIC"/>
<ctl name="ADCR Mux" val="ADC"/>

<!-- AIF2ADCDAT to AIF3ADC mux -->
<ctl name="AIF3ADC Mux" val="1"/>

<!-- Default all outputs off -->
<ctl name="HP Switch" val="0"/>
<ctl name="SPK Switch" val="0"/>
<ctl name="RCV Switch" val="0"/>
<ctl name="LINE Switch" val="0"/>
<ctl name="HDMI Switch" val="0"/>

<!-- Default all inputs off -->
<ctl name="Main Mic Switch" val="0"/>
<ctl name="Sub Mic Switch" val="0"/>
<ctl name="Headset Mic Switch" val="0"/>
<ctl name="FM In Switch" val="0"/>

<!-- EQ Switches -->
<ctl name="AIF1DAC1 EQ Switch" val="1"/>
<ctl name="AIF1DAC1 EQ1 Volume" val="9"/>
<ctl name="AIF1DAC1 EQ2 Volume" val="7"/>
<ctl name="AIF1DAC1 EQ3 Volume" val="10"/>
<ctl name="AIF1DAC1 EQ4 Volume" val="13"/>
<ctl name="AIF1DAC1 EQ5 Volume" val="12"/>

</path>
<device name="speaker">
<path name="on">
<ctl name="SPK Switch" val="1"/>
<ctl name="AIF1DAC1 Volume" val="98"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="DAC1 Volume" val="98"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
<ctl name="SPKL DAC1 Volume" val="1"/>
<ctl name="SPKR DAC1 Volume" val="1"/>
<ctl name="Speaker Mixer Volume" val="3"/>
<ctl name="Speaker Boost Volume" val="4"/>
<ctl name="Speaker Volume" val="59"/>
</path>
<path name="off">
<ctl name="SPK Switch" val="0"/>
<ctl name="Speaker Mixer Volume" val="1"/>
<ctl name="Speaker Volume" val="0"/>
</path>
</device>
<device name="earpiece">
<path name="on">
<ctl name="RCV Switch" val="1"/>
<ctl name="AIF2DAC2L Mixer AIF2 Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer AIF2 Switch" val="0"/>
<ctl name="AIF2ADC HPF Mode" val="1"/>
<ctl name="AIF2ADC HPF Switch" val="1"/>
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF2DAC Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="1"/>
<ctl name="AIF2 Boost Volume" val="1"/>
<ctl name="DAC1 Volume" val="96"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
<ctl name="Output Volume" val="60"/>
<ctl name="Earpiece Volume" val="1"/>
</path>
<path name="off">
<ctl name="RCV Switch" val="0"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="AIF2 Boost Volume" val="0"/>
<ctl name="Output Volume" val="57"/>
</path>
</device>
<device name="headphone">
<path name="on">
<ctl name="HP Switch" val="1"/>
<ctl name="Headphone Volume" val="50"/>
<ctl name="Headphone ZC Switch" val="0"/>
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="DAC1 Volume" val="96"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
</path>
<path name="off">
<ctl name="HP Switch" val="0"/>
</path>
</device>
<device name="sco-out">
<path name="on">
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="AIF3ADC Mux" val="1"/>
<ctl name="AIF2ADC HPF Mode" val="3"/>
<ctl name="AIF2ADC HPF Switch" val="1"/>
<ctl name="AIF2DAC2L Mixer AIF1.1 Switch" val="1"/>
<ctl name="AIF2DAC2R Mixer AIF1.1 Switch" val="1"/>
<ctl name="AIF2DAC Volume" val="96"/>
<ctl name="AIF2ADC Volume" val="96"/>
<ctl name="DAC2 Volume" val="96"/>
</path>
<path name="off">
<ctl name="AIF1DAC1 Volume" val="96"/>
<ctl name="AIF1 Boost Volume" val="0"/>
<ctl name="DAC2 Volume" val="96"/>
<ctl name="AIF2ADC Volume" val="96"/>
<ctl name="AIF2DAC2L Mixer AIF1.1 Switch" val="0"/>
<ctl name="AIF2DAC2R Mixer AIF1.1 Switch" val="0"/>
</path>
</device>
<device name="analogue-dock">
<path name="on">
<ctl name="LINEOUT2N Switch" val="1"/>
<ctl name="LINEOUT2P Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Left Output Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Right Output Switch" val="0"/>
<ctl name="LINEOUT2P Mixer Right Output Switch" val="1"/>
<ctl name="LINE Switch" val="1"/>
<ctl name="LineoutSwitch Mode" val="1"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
</path>
<path name="off">
<ctl name="LineoutSwitch Mode" val="0"/>
<ctl name="LINEOUT2N Switch" val="0"/>
<ctl name="LINEOUT2P Switch" val="0"/>
<ctl name="LINE Switch" val="0"/>
</path>
</device>
<device name="digital-dock">
<path name="on">
<ctl name="LINEOUT2N Switch" val="1"/>
<ctl name="LINEOUT2P Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Left Output Switch" val="1"/>
<ctl name="LINEOUT2N Mixer Right Output Switch" val="0"/>
<ctl name="LINEOUT2P Mixer Right Output Switch" val="1"/>
<ctl name="LINE Switch" val="1"/>
<ctl name="LineoutSwitch Mode" val="1"/>
<ctl name="Left Output Mixer DAC Volume" val="7"/>
<ctl name="Right Output Mixer DAC Volume" val="7"/>
</path>
<path name="off">
<ctl name="LineoutSwitch Mode" val="0"/>
<ctl name="LINEOUT2N Switch" val="0"/>
<ctl name="LINEOUT2P Switch" val="0"/>
<ctl name="LINE Switch" val="0"/>
</path>
</device>
<device name="aux-digital">
<path name="on">
<ctl name="LINEOUT1N Switch" val="1"/>
<ctl name="LINEOUT1P Switch" val="1"/>
<ctl name="HDMI Switch" val="1"/>
</path>
<path name="off">
<ctl name="LINEOUT1N Switch" val="0"/>
<ctl name="LINEOUT1P Switch" val="0"/>
<ctl name="HDMI Switch" val="0"/>
</path>
</device>
<device name="builtin-mic">
<path name="on">
<ctl name="Main Mic Switch" val="1"/>
<ctl name="MainMicBias Mode" val="1"/>
<ctl name="IN2L Volume" val="22"/>
<ctl name="MIXINL IN2L Switch" val="1"/>
<ctl name="MIXINL IN2L Volume" val="1"/>
<ctl name="AIF1ADCL Source" val="Left"/>
<ctl name="AIF1ADCR Source" val="Left"/>
<ctl name="AIF1ADC1R Mixer ADC/DMIC Switch" val="1"/>
<ctl name="AIF1ADC1 HPF Mode" val="1"/>
<ctl name="AIF1ADC1 HPF Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
</path>
<path name="off">
<ctl name="Main Mic Switch" val="0"/>
<ctl name="MainMicBias Mode" val="0"/>
<ctl name="MIXINL IN2L Switch" val="0"/>
</path>
</device>
<device name="back-mic">
<path name="on">
<ctl name="Sub Mic Switch" val="1"/>
<ctl name="SubMicBias Mode" val="1"/>
<ctl name="IN1R Volume" val="22"/>
<ctl name="MIXINR IN1R Switch" val="1"/>
<ctl name="MIXINR IN1R Volume" val="1"/>
<ctl name="AIF1ADCR Source" val="1"/>
<ctl name="AIF1ADC1 HPF Mode" val="1"/>
<ctl name="AIF1ADC1 HPF Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
</path>
<path name="off">
<ctl name="Sub Mic Switch" val="0"/>
<ctl name="SubMicBias Mode" val="0"/>
<ctl name="MIXINR IN1R Switch" val="0"/>
<ctl name="IN1R Volume" val="10"/>
</path>
</device>
<device name="headset-in">
<path name="on">
<ctl name="MIXINL IN2L Switch" val="0"/>
<ctl name="MIXINR IN1R Switch" val="0"/>
<ctl name="Headset Mic Switch" val="1"/>
<ctl name="AIF1ADCL Source" val="0"/>
<ctl name="AIF1ADCR Source" val="0"/>
<ctl name="AIF2ADCL Source" val="0"/>
<ctl name="AIF1ADCL Source" val="Left"/>
<ctl name="AIF1ADCL Source" val="Right"/>
<ctl name="IN1L Volume" val="22"/>
<ctl name="MIXINL IN1L Switch" val="1"/>
<ctl name="MIXINL IN1L Volume" val="1"/>
<ctl name="AIF1ADC1 HPF Mode" val="1"/>
<ctl name="AIF1ADC1 HPF Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
</path>
<path name="off">
<ctl name="Headset Mic Switch" val="0"/>
<ctl name="MIXINL IN1L Switch" val="0"/>
</path>
</device>
<device name="sco-in">
<path name="on">
<ctl name="AIF2ADC Mux" val="1"/>
<ctl name="AIF2ADC HPF Mode" val="3"/>
<ctl name="AIF2ADC HPF Switch" val="1"/>
<ctl name="AIF1ADCL Source" val="0"/>
<ctl name="AIF1ADCR Source" val="1"/>
<ctl name="AIF1ADC1R Mixer AIF2 Switch" val="1"/>
<ctl name="AIF1ADC1L Mixer AIF2 Switch" val="1"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
<ctl name="AIF2DAC Volume" val="96"/>
</path>
<path name="off">
<ctl name="AIF2ADC Mux" val="0"/>
<ctl name="AIF1ADC1R Mixer AIF2 Switch" val="0"/>
<ctl name="AIF1ADC1L Mixer AIF2 Switch" val="0"/>
<ctl name="AIF1ADC1 Volume" val="96"/>
<ctl name="AIF2DAC Volume" val="96"/>
</path>
</device>
<device name="fmradio">
<path name="on">
<ctl name="DAC1L Mixer AIF1.1 Switch" val="1"/>
<ctl name="DAC1L Mixer AIF1.1 Switch" val="1"/>
</path>
<path name="off">
<ctl name="MIXINL Output Record Volume" val="0"/>
<ctl name="MIXINR Output Record Volume" val="0"/>
</path>
</device>
</tinyhal>

Maybe you should just use Viper instead of modifying system files

 

[PetrSP7]

So I tried to install BusyBox and Viper as well. Looked both are installed OK, but Viper not processing: (Driver status/Processing: No) same issue mentioned here https://forum.xda-developers.com/android/general/v4a-fix-processing-using-magisk-t3572819?nocache=1 ...

 

[PetrSP7]

Viper

Maybe you should just use Viper instead of modifying system files

Sorry, but Viper still not processing: (Driver status/Processing: No) and no way to get it working … :-/ Do you have any idea … ? Thanks.

 

[TRNSLN]

Sorry, but Viper still not processing: (Driver status/Processing: No) and no way to get it working … :-/ Do you have any idea … ? Thanks.

You need to install Audio Modification Tool from Magisk.

 

[Skull97]

Sorry, but Viper still not processing: (Driver status/Processing: No) and no way to get it working … :-/ Do you have any idea … ? Thanks.

Try disable AudioFX

 

[PetrSP7]

Try disable AudioFX

But AudioFX not installed ...

 

[PetrSP7]

You need to install Audio Modification Tool from Magisk.

OK. For to be sure: Does it need Busy Box, or not? Viper says, you need Busy Box previously installed, what I did. But despite of this, Viper not processed ...

 

[mzj4213]

OK. For to be sure: Does it need Busy Box, or not? Viper says, you need Busy Box previously installed, what I did. But despite of this, Viper not processed ...

Maybe use the 2.6.0.5 version, and did you install any other audio mods?

 

[PetrSP7]

No other audio mod installed. But again, do I need Busy Box to run Magisk?

 

[mzj4213]

No other audio mod installed. But again, do I need Busy Box to run Magisk?

Yes, you'll need it when installing the driver.

 

[sameh1982]

unfortunately fast battery draining and overheat

 

[sid2109]

Hi! I used your rom, and it very smoothies and fast, but a few days ago, I wake up and see my phone auto reboot and stuck at logo screen. I tried get into TWRP but seem everything in storage disappear. Please support me.
Here is the video:
https://www.youtube.com/watch?v=U8V_3aRfucw

I think this is a serious problem with ROM which has gone unnoticed and unfixed. The same thing happened with my phone too. The memory became corrupt and no matter what I tried I couldn't recover it. I had to eventually replace the motherboard to get my phone working again.

This ROM has a problem which causes random reboots and then one of the times you will eventually encounter the problem you have explained and shown in your youtube video. The devs needs to look into it.

 

[Sealsman]

external sd card check

Did you ever check your external sd card if that hat ans errors?