• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][OFFICIAL][7.1/8.1][A6020] AOKP-ROM - Lenovo Vibe K5/K5 Plus | OMS/Substratum

Search This thread

tsifra

Member
Jan 11, 2019
7
0
It looks like automatic building was broken since 17 dec

I'm using latest build available and have following bug. Airplane mode When i go to airplane mode everything works as expected. When i try to switch it off (turn on radion signals) it switches on wifi but cellular is not going to connect. After reboot in this mode everything is okay agan. If i try to reboot in airplane mode radio is switched off after boot, but "empty" cellular icon is in statusbar instead of aircraft.

Once again. How to reproduce.
1. Switch on phone
2. Turn on airplane mode
3. Turn off airplane mode

Result: phone not connecting to GSM
 

Shreps

Recognized Developer
Feb 13, 2012
1,828
4,460
Paris
moto.shreps.fr
It looks like automatic building was broken since 17 dec

I'm using latest build available and have following bug. Airplane mode When i go to airplane mode everything works as expected. When i try to switch it off (turn on radion signals) it switches on wifi but cellular is not going to connect. After reboot in this mode everything is okay agan. If i try to reboot in airplane mode radio is switched off after boot, but "empty" cellular icon is in statusbar instead of aircraft.

Once again. How to reproduce.
1. Switch on phone
2. Turn on airplane mode
3. Turn off airplane mode

Result: phone not connecting to GSM
Oreo building is working fine
 

tsifra

Member
Jan 11, 2019
7
0
Oreo building is working fine
Maybe i'm looking in wrong place? [can't post links here] xfer aokp co / developer = AOKP & folder = A6020 second link from first post has only 2017 builds There are no fresh downloadable zips on aokp.com and build log from 01/11/19 10:30:06 says:

Code:
  LD      drivers/staging/built-in.o
  LD      drivers/built-in.o
Makefile:130: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
make: Leaving directory '/home/build/src/aokp-8.1/kernel/lenovo/msm8916'
...
ninja: build stopped: subcommand failed.
01:19:47 ninja failed with: exit status 1

[0;31m#### failed to build some targets (05:35 (mm:ss)) ####[00m
 

Shreps

Recognized Developer
Feb 13, 2012
1,828
4,460
Paris
moto.shreps.fr
Maybe i'm looking in wrong place? [can't post links here] xfer aokp co / developer = AOKP & folder = A6020 second link from first post has only 2017 builds There are no fresh downloadable zips on aokp.com and build log from 01/11/19 10:30:06 says:

Code:
  LD      drivers/staging/built-in.o
  LD      drivers/built-in.o
Makefile:130: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
make: Leaving directory '/home/build/src/aokp-8.1/kernel/lenovo/msm8916'
...
ninja: build stopped: subcommand failed.
01:19:47 ninja failed with: exit status 1

[0;31m#### failed to build some targets (05:35 (mm:ss)) ####[00m

hm you right, let me check this with the AOKP team
 

tsifra

Member
Jan 11, 2019
7
0
hm you right, let me check this with the AOKP team

Thank you! Now i have new build. But another problem arrived. I've encrypted my phone and twrp doen't want to accept right pattern. Tried two of your versions twrp-k5-3.1.1-Oreo_shreps.img and twrp-k5-3.2.1_shreps.img Both give the same error "failed to decrypt data". Tried to change security from "pattern" to "pin". No luck. Please help. It's great device. Removable battery and it's capacity are uniq. So bad that i've changed my system programming to php/python one day.
UPD: also tried 3.2.3 from official site. No luck.
 
Last edited:

Priyanshu02

Senior Member
Dec 21, 2017
170
34
I'm getting this error while installing the latest Oreo zip download from AOKP website with 477 M.B, any solution please
 

Attachments

  • IMG_20190130_200348.jpg
    IMG_20190130_200348.jpg
    251.6 KB · Views: 171

Priyanshu02

Senior Member
Dec 21, 2017
170
34
You have a nougat based TWRP, you must upgrade to an Oreo based one.

Can I directly flash the new TWRP of Oreo from the present TWRP.

Update : First of all thanks Mr.Sherps for your great and hard work this wicked device.I just went to the video which after watching I flashed TWRP over my device.And got the link to download latest TWRP and I this time came to know that Sherps is the developer of this TWRP,otherwise I always thought Sherps ro be some kind of version of TWRP. Really sorry for that.
Buddy you are my hero, you don't know what you have done for me. You saved me from high level scolding from my father who is stick with this device.

I just flashed the latest TWRP.img file and rom installed perfectly. Now I am going to sleep at morning will check the functionality of it.
Really thanks man, keep up your work.:good::good:
 
Last edited:

hsj51

Member
Aug 26, 2017
41
23
Pune
hrutvik.tk
This rom is not good as expected and has a lot of bugs. Although the just loved the lag free and smooth news of UI bit bugs cant go unnoticed.

Bugs: -

1. Device not connecting to PC/Laptop via cable just charging happens and when File Transfer option is selected, a android process has stopped working comes.

2. Decide not Connection to any file sharing software like Sharir, Mi Drop etc.

Appreciate your work dev as I'm not paying you for this. So I dont have rhe right to ask to solve them. Im just requesting you to take a look at them or mayne its only me who faced these issue.
I dont face any such issues.
You should try reflashing the rom
 
  • Like
Reactions: Priyanshu02

Top Liked Posts

  • There are no posts matching your filters.
  • 72
    106.png

    Android. Infused with magical unicorn bytes
    The unicorn eats nougat and oreo and farts rainbows :D

    Hi,
    Here is AOKP 7.1/8.1 for the Lenovo Vibe K5/K5 Plus

    Requirements:
    - TWRP 3.0.3+ build: Recovery TWRP 3.0.3-n1 for K5
    - You can now use the Official TWRP builds

    How to install:
    From stock
    1. Copy the ROM zip on your phone
    2. Reboot in TWRP Recovery mode
    3. Backup your phone!
    4. Format/Wipe system, cache, dalvik, data
    5. Flash/Install ROM
    6. Flash Install Gapps (OpenGapps ARM64 Mini or smaller is recommanded)
    7. Reboot

    Upgrade from previous build
    1. Copy the ROM zip on your phone
    2. Reboot in TWRP Recovery mode
    3. Format/Wipe only cache, dalvik
    4. Flash/Install ROM
    5. Reboot

    Official Nightly builds Downloads:
    http://xfer.aokp.co/?developer=AOKP&folder=A6020
    https://basketbuild.com/devs/aokp/A6020

    Old Beta builds Downloads:
    https://moto.shreps.fr


    XDA:DevDB Information
    [ROM][OFFICIAL][7.1/8.1][A6020] AOKP-ROM - Lenovo Vibe K5/K5 Plus | OMS/Substratum, ROM for the Android General

    Contributors
    Shreps, scritch007
    Source Code: https://github.com/AOKP/device_lenovo_A6020

    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: TWRP 3 Recovery
    Based On: AOKP

    Version Information
    Status: Nightly

    Created 2016-11-15
    Last Updated 2018-07-25
    32
    Reserved

    AOKP Gerrit: http://gerrit.aokp.co/#/q/status:merged

    This ROM now implements OMS.

    What is OMS ?
    OMS: (Overlay Manager Service) was designed by google. It's a layer/theme service which is used by Substratum: https://play.google.com/store/apps/details?id=projekt.substratum&hl=fr

    So basically, if you install Substratum, you will be able to apply any theme on the ROM UI because OMS has been implemented.

    For the record, on PAC MM or AOKP MM, they were using CyanogenMod Theme Engine for theming the UI, but since CMTE has not been implemented for Nougat, many choose to use OMS & Substratum instead.


    Screenshot_20161115-114050.png Screenshot_20161115-114031.png

    device-2017-01-03-142534.jpg device-2017-01-03-142552.png device-2017-01-03-142603.png
    19
    Bump
    AOKP Oreo (8.1) is now official for this device.

    Big thanks again to @Harry8242 and his great development and contribution !

    Cheers,
    18
    Hello guys,

    Here we go for Official Nightly builds made by AOKP Buildbot : https://basketbuild.com/devs/aokp/A6020

    Enjoy !
    16
    Finaly I could install this ROM. This is what I found for now. Maybe some of them was already listed, but anyway, there are:

    1. Shotcuts on lock screen desapear from nothing, the top ones or the righ bottom;
    2. Alarm icon and some others desappears after reboot, and after re-enable them appears a blank space at right of battery icon;
    3. Notification led don't turns green when fully charged;
    4. Notification led don't stay lit, it always pulse even if I disable this on settings. I uncheck this, go back, and if I return to this setting, it is re-enabled itself. I have to add personalized led notification to each app I want to keep always lit;
    5. I don't have a warning telling an alarm is next, like PAC-ROM;
    6. "Don't disturb" (or "Do not perturb") keep some sounds even it is enable only priority alarms. As well, the icon for schedule time for "do not perturb" is different for manual "do not perturb" (from the status bar pull down menu): the scheduled is a "plus" sign, the other is a "minus". Can anyone tell the difference or how to have always "minus" scheduled, please?
    7. Some calls still alive after some seconds even when I terminate them;
    8. I use a PIN for lock my phone. If I configure a direct call to lock screen, it dials the number directly, don't asking for PIN. Any other shortcut ask for PIN;
    9. I can't find the icon to change the screen off timer on status bar pull down menu. I have to go to settings to change this timer;
    10. How I can 'centralize' the listings? They always appears at bottom of screen;
    11. Date and time aren't correct after a reboot. I have to keep automatic date and time from network in settings;
    12. After a reboot, battery mode is always at 'balanced', even if I configure to 'performance'.

    Other issues:
    1. I haved to use TWRP R2 instead R4, because R4 shows two 'data' partitions. With this, R4 always returns erros about can't mount or format data;
    2. System is very low in free space, so I used TWRP R2 to backup the whole ROM, and just after I restored it, like sayed before. I gain about 1,2Gb of free space, and can move some user apps to system partition;
    3. There are translation errors, at least for brazilian portuguese: a lot of words are still in English.

    Even with these, the ROM is the best I used until now. Is really fast, camera works fine, and there a lot of options to personalize. Very, very thanks for the ROM.

    I'm using 12-12-2016 build on a L36 variant.

    Thx for this great and detailed feedback.
    I made a new build today, with somes fixes, let me know how it's going:
    * Fixed system and other partitions size, so you should be able to flash micro or mini Gapps for example now.
    * Added the LiveDisplay in the kernel
    * Divided light sensor returned value by 10 this is much much closer to what we get from the Moto G4 Plus sensor
    * xxhdpi density (tks to Dinokin)
    * Tethering should be fixed