[ROM][OFFICIAL][7.1] Allwinner H3 MXQ PRO 4K 5G STOCK ROM

[sixtoja]

Sorry I don't, I haven't encounter this type of problem before maybe your CPU is overheating make sure you reapplied your heatsink properly after checking it's model or if the motherboard is outside the case don't touch it you're probably shorting the contacts on your motherboard tried it before and sure enough it did freeze.

Thanks for answering, Yes, I put heatsink cream between the processor and the heatsink. and an extractor to the tv box. But it is still the same. The funny thing is that when it is on and hot it lasts 1 day on without freezing. The problem is when turning on and the board is cold. I use antistatic gloves when handling the board

 

[babosBoss]

прошивка с Android 10 Q для боксов на Allwinner H3

R69 Allwinner H3 - T3CH ASSIS.zip

drive.google.com

 

[nipunpradhan100]

Can anyone tell me how can one check which wifi chip it's using

 

[fachos]

HI... can you compile this ROM with HS2734A wifi module driver? i just flash your rom.. everytings good but wifi not working... i got cheap box same specs H3.. ony thing is the wifi module is difference... im very appreciate if you can help me....

Thank You

 

[babosBoss]

ПРИВЕТ... я просто прошиваю твой пзу.. все хорошо, но Wi-Fi не работает... у меня есть дешевая коробка с теми же характеристиками H3.. вся штука в том, что модуль Wi-Fi отличается... я очень признателен, если вы сможете мне помочь....

rооt сначала сделайте

 

[fachos]

rооt сначала сделайте

thank you friend... i will give a try.. let you know later

 

[remlei]

tried this rom, it actually works, mine have different chips but the main things like the SoC and the WiFi chipset are the same.

its the same board revision.

for the rom, it actually works. not until you install other GSM related apps (eg update the Google Play Service) will cause other apps to crash that heavily rely on it. So if you want thsi to run stable, just dont install any app that relies on GMS and dont install Google play services.

the stock rom that is installed with this very cheap (sub 10dollar) ATV box, its is ****ed up, the RAM capacity is wrong (only 1GB actual) and 64GB eMMC (8GB actual) and everything you run on it crashes and you always have that pop-up that google play store is crashing and also the google play services as well.

I got fed up on it and basically just install RetrOrangePi use the Sunveil R69 Image and install it on that small 8GB emmc storage and bam, its basically a very functional media player / retro console emulator. Though the wifi is not functional but you can just add a USB WiFi on it and your done (or use the ethernet port) adding bluetooth support on it is also very easy (I just have bluetooth dongle and that works without messing with it). This custom armbian image also have Kodi on it so you can use it to play videos/audios on it.

 

[ridhakossay]

Plz i need firmware of MXQ EP_V31_58 WIFI SV6158 (8Gb/128Gb)...​

 

[Kamui_]

tried this rom, it actually works, mine have different chips but the main things like the SoC and the WiFi chipset are the same.

its the same board revision.

for the rom, it actually works. not until you install other GSM related apps (eg update the Google Play Service) will cause other apps to crash that heavily rely on it. So if you want thsi to run stable, just dont install any app that relies on GMS and dont install Google play services.

the stock rom that is installed with this very cheap (sub 10dollar) ATV box, its is ****ed up, the RAM capacity is wrong (only 1GB actual) and 64GB eMMC (8GB actual) and everything you run on it crashes and you always have that pop-up that google play store is crashing and also the google play services as well.

I got fed up on it and basically just install RetrOrangePi use the Sunveil R69 Image and install it on that small 8GB emmc storage and bam, its basically a very functional media player / retro console emulator. Though the wifi is not functional but you can just add a USB WiFi on it and your done (or use the ethernet port) adding bluetooth support on it is also very easy (I just have bluetooth dongle and that works without messing with it). This custom armbian image also have Kodi on it so you can use it to play videos/audios on it.

Hey @remlei are you willing to share more about the flashing process of this ROM?

Ok some steps from me

1. Download the image from here http://www.retrorangepi.org/images/Sunvell-r69/ (I used the small one)
2. Use "Balena Etcher" to flash the image file to an SD card.
3. Plug the SD card in MXQ and plug the powercord.
4. The system boots in OrangePi Retro and asks to resize the internal storage after reboot...Screen goes black after a while and nothing happens.

 

[jtripper80]

Hi, I was wondering if there is any way to get this box. To increase the cache memory by using there used to be an app. That could be used. I can't remember the name though. Ebooster or something like that.

Thanks for the help

 

[jtripper80]

Hi, I was wondering if there is any way to get this box. To increase the cache memory by using there used to be an app. That could be used. I can't remember the name though. Ebooster or something like that.

Thanks for the help

 

[ramin_malek]

This Frimware Android Version And Also Working On R69 2Gram ???

 

[PepitoPerez1995]

MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED)​

If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you.​

Only works for Allwinner H3 models with 5G support!


SPECS WITH THE BOX THAT I TESTED:
CPU: Allwinner Tech H3 @1.1Ghz
RAM MODULES: SEC 246 (4 Chips) and ELPIDA J2104ECSE (4Chips)
RAM Space: 4GB (1GB Actual)
ROM: 64GB (8GB Actual)
WiFi: SV6256P (Most stable)
Board ID: QL2039 - Q44_V4.0_20200602

Things to prepare:
A full sized USB to USB cable (You can make your own using your old charging cables)
A computer that is running Windows 7 or later
A toothpick or anything that would fit on the AV port
USB Mouse to interact with TWRP Recovery

5G only:
-Flash box with the firmware H3-R69-MXQ-S-MXQ4K-8PD3-1.1.4 using phoenix suite
The Box will boot, but WiFi not working
-Go and activate developer options and enable USB debugging and USB0 device mode
-Copy twrp.zip (from archive in link bellow) to flash drive
-Connect Phoenix suite to box using the USB to USB cable and press recovery and the box will boot into recovery mode
-Press install update from external and choose twrp.zip (executable only) DO NOT TRY to install just run it!
-Make full backup of "no-WiFi" rom (check all boxes) and save it to external flash drive
-When is done, disconnect flash drive from box and connect to pc. Replace only files ( from backup in link bellow ) to folder in flash drive. DO NOT rename folder!
-Boot box to "no-WiFi" rom and connect to phoenix suite and press recovery again.
- From stock recovery load twrp.zip again, point where backup is, mark again all boxes, and choose restore.
- Wait to finish and press reboot when is done.
Box will now boot to stock firmware with working Wi-Fi

This firmware is tested with the "SV6256P" WiFi chipset.
XR819 Devices are not supported!
This ROM will still boot without the following WiFi modules but Wi-Fi function will not work, Hope you will find the right one soon though GL on your next Google search

Tips:
1. If you've noticed the display output resolution is not 4K
Go to Settings>Display>HDMI output mode>4K_30Hz (Refresh rate is limited to 30Hz/FPS due to hardware limitations)

2. If you accidentally deleted Netflix app or you want to update YouTube just go to GetApps app (No need to go to some dodgy websites just go to the built in rooted store to get the latest updates)

3. It's really hard to find a custom ROM that is fully working for this Box but you can actually customize it on your own like the attached image below

4. A driver is required for Phoenix Suit to detect the box when plugged in please download a working driver before doing so, if the box is detected you can continue the steps without downloading the driver.

5. To flash the box use the USB port 4 (Located at the back side of the box or the rear panel where the rear ports are located) your PC will not detect the box if you use USB port 1-3!

Downloads:
Phoenix Suit V1.10 Flash Tool Download
Download all files Here

ROM INFO:
ROM OS Version: Android 7.0-7.1 Actual
ROM Kernel: Linux 4.4.55
Android Security patch level: (Located in Settings>TV Status)

hello friends I have a problem with this board, it happens that it does not let me flash, neither from SD, nor from USB, I wanted to know soon if someone knows how to repair it, I attached a video of how it reacts, and images
Q44 v4.1 20210120

MXQ PRO 4K 5G OFFICIAL STOCK FIRMWARE (ROOTED)​

If you have an MXQ PRO 4K 5G that it's bricked or a firmware that doesn't support your current WiFi module then this is for you.​

Only works for Allwinner H3 models with 5G support!


SPECS WITH THE BOX THAT I TESTED:
CPU: Allwinner Tech H3 @1.1Ghz
RAM MODULES: SEC 246 (4 Chips) and ELPIDA J2104ECSE (4Chips)
RAM Space: 4GB (1GB Actual)
ROM: 64GB (8GB Actual)
WiFi: SV6256P (Most stable)
Board ID: QL2039 - Q44_V4.0_20200602

Things to prepare:
A full sized USB to USB cable (You can make your own using your old charging cables)
A computer that is running Windows 7 or later
A toothpick or anything that would fit on the AV port
USB Mouse to interact with TWRP Recovery

5G only:
-Flash box with the firmware H3-R69-MXQ-S-MXQ4K-8PD3-1.1.4 using phoenix suite
The Box will boot, but WiFi not working
-Go and activate developer options and enable USB debugging and USB0 device mode
-Copy twrp.zip (from archive in link bellow) to flash drive
-Connect Phoenix suite to box using the USB to USB cable and press recovery and the box will boot into recovery mode
-Press install update from external and choose twrp.zip (executable only) DO NOT TRY to install just run it!
-Make full backup of "no-WiFi" rom (check all boxes) and save it to external flash drive
-When is done, disconnect flash drive from box and connect to pc. Replace only files ( from backup in link bellow ) to folder in flash drive. DO NOT rename folder!
-Boot box to "no-WiFi" rom and connect to phoenix suite and press recovery again.
- From stock recovery load twrp.zip again, point where backup is, mark again all boxes, and choose restore.
- Wait to finish and press reboot when is done.
Box will now boot to stock firmware with working Wi-Fi

This firmware is tested with the "SV6256P" WiFi chipset.
XR819 Devices are not supported!
This ROM will still boot without the following WiFi modules but Wi-Fi function will not work, Hope you will find the right one soon though GL on your next Google search

Tips:
1. If you've noticed the display output resolution is not 4K
Go to Settings>Display>HDMI output mode>4K_30Hz (Refresh rate is limited to 30Hz/FPS due to hardware limitations)

2. If you accidentally deleted Netflix app or you want to update YouTube just go to GetApps app (No need to go to some dodgy websites just go to the built in rooted store to get the latest updates)

3. It's really hard to find a custom ROM that is fully working for this Box but you can actually customize it on your own like the attached image below

4. A driver is required for Phoenix Suit to detect the box when plugged in please download a working driver before doing so, if the box is detected you can continue the steps without downloading the driver.

5. To flash the box use the USB port 4 (Located at the back side of the box or the rear panel where the rear ports are located) your PC will not detect the box if you use USB port 1-3!

Downloads:
Phoenix Suit V1.10 Flash Tool Download
Download all files Here

ROM INFO:
ROM OS Version: Android 7.0-7.1 Actual
ROM Kernel: Linux 4.4.55
Android Security patch level: (Located in Settings>TV Status)

hello friends I have a problem with this board, it happens that it does not let me flash, neither from SD, nor from USB, I wanted to know soon if someone knows how to repair it, I attached a video of how it reacts, and images
Q44 v4.1 20210120

 

[cobra1111new]

Link not working

 

[Mrfosilman]

Hey @remlei are you willing to share more about the flashing process of this ROM?

Ok some steps from me

1. Download the image from here http://www.retrorangepi.org/images/Sunvell-r69/ (I used the small one)
2. Use "Balena Etcher" to flash the image file to an SD card.
3. Plug the SD card in MXQ and plug the powercord.
4. The system boots in OrangePi Retro and asks to resize the internal storage after reboot...Screen goes black after a while and nothing happens.

Does it have to be an SD card? I want to do it with a flash drive.

 

[Kamui_]

Does it have to be an SD card? I want to do it with a flash drive.

I haven't tried with a USB to tell you the truth. Be my guest and try and be sure to check every USB port.

 

[Mrfosilman]

I haven't tried with a USB to tell you the truth. Be my guest and try and be sure to check every USB port.

But it does work, doesn't it? And where's the reset button? They say it's in the AV port.

 

[joranto]

hello friends I have a problem with this board, it happens that it does not let me flash, neither from SD, nor from USB, I wanted to know soon if someone knows how to repair it, I attached a video of how it reacts, and images
Q44 v4.1 20210120

hello friends I have a problem with this board, it happens that it does not let me flash, neither from SD, nor from USB, I wanted to know soon if someone knows how to repair it, I attached a video of how it reacts, and images
Q44 v4.1 20210120

Hello, it is a pleasure to greet you. Did you solve the problem? I have the same problem with a MXQ 4k 5G. I still can't find a solution.
----------------
Hola, es un gusto saludarte. Solucionaste el problema? Tengo el mismo problema con una MXQ 4k 5G. Aún no encuentro solución.

 

[PepitoPerez1995]

Hello, it is a pleasure to greet you. Did you solve the problem? I have the same problem with a MXQ 4k 5G. I still can't find a solution.
----------------
Hola, es un gusto saludarte. Solucionaste el problema? Tengo el mismo problema con una MXQ 4k 5G. Aún no encuentro solución.

Bro , de igual un gusto saludarte , pude volver a usar el tv box, pero de una manera distinta, instalando el sistema no en la NAND del dispositivo si no en una tarjeta SD, me arranco bien y asi lo he estado usando ... si lo vas a intentar consiguete una SD si es posible A10 ya que las de velocidades menores sirven pero se demora mas, entonces cuando lo vayas a bootear en el phoenix card , no lo formateas en "producto" si no donde dice "startup"
por lo pronto es una solucion ya que no pude formatear la NAND por lo menos no de una manera sin que se tenga que desoldar y poner en una placa y formatearla de manera individual cosa que no manejo muy bien ............ un saludo espero te sirva por el momento es lo unico que me sirvio

Mod translation:
Bro, a pleasure to greet you anyway, I was able to use the tv box again, but in a different way, installing the system not on the device's NAND but on an SD card, it booted up fine and that's how I've been using it... if you are going to try it, get an SD if possible A10 since the ones with lower speeds work but it takes longer, then when you go to boot it in the phoenix card, do not format it in "product" but where it says "startup"
for now it is a solution since I could not format the NAND at least not in a way without having to desolder it and put it on a plate and format it individually which I do not handle very well ........ .... a greeting I hope it helps you for the moment it is the only thing that helped me

 

[joranto]

Bro , de igual un gusto saludarte , pude volver a usar el tv box, pero de una manera distinta, instalando el sistema no en la NAND del dispositivo si no en una tarjeta SD, me arranco bien y asi lo he estado usando ... si lo vas a intentar consiguete una SD si es posible A10 ya que las de velocidades menores sirven pero se demora mas, entonces cuando lo vayas a bootear en el phoenix card , no lo formateas en "producto" si no donde dice "startup"
por lo pronto es una solucion ya que no pude formatear la NAND por lo menos no de una manera sin que se tenga que desoldar y poner en una placa y formatearla de manera individual cosa que no manejo muy bien ............ un saludo espero te sirva por el momento es lo unico que me sirvio

Mod translation:
Bro, a pleasure to greet you anyway, I was able to use the tv box again, but in a different way, installing the system not on the device's NAND but on an SD card, it booted up fine and that's how I've been using it... if you are going to try it, get an SD if possible A10 since the ones with lower speeds work but it takes longer, then when you go to boot it in the phoenix card, do not format it in "product" but where it says "startup"
for now it is a solution since I could not format the NAND at least not in a way without having to desolder it and put it on a plate and format it individually which I do not handle very well ........ .... a greeting I hope it helps you for the moment it is the only thing that helped me

Thank you for responding. I had it with original firmware, but I didn't like it and decided to change it, and I put this one. I no longer know exactly what I did what I wanted was to activate Google services. Well the thing is that it no longer gave me an image, and I wanted to flash again with PhoenixSuit and it was no longer possible, it stayed at 7% and did not advance or it reached 63% and the error message came out. I tried for sd card and neither. In the sd card after using PhoenixCard, when checking with windows explorer I see it empty as if I had not recorded anything. I'm thinking of formatting my PC and doing the process with PhoenixSuit or PhoenixCard.

--------------------
Gracias por responder. Yo lo tenía con firmware original, pero no me gustaba y decidí cambiarla, y le puse esta. Ya no sé bien qué hice lo que quería era activar los servicios de google. Bueno la cosa es que ya no me daba imagen, y quise flashear nuevamente con PhoenixSuit y ya no se podía, se quedaba en 7% y no avanzaba o llegaba al 63% y salía el mensaje de error. Intenté por sd card y tampoco. En la sd card después de usar PhoenixCard, al revisar con el explorador de windows lo veo vacio como si no hubiera grabado nada. Estoy pensando formatear mi PC y hacer el proceso con PhoenixSuit o PhoenixCard.