[ROM][OFFICIAL][7.1] CyanogenMod 14.1 Nightlies for i9300
- Thread starter forkbomb444
- Start date
- Status
@forkbomb444 Unfortunately, it is not
After a day it is back (in my case) . As reboot always helps with this - is it a way to restart bluetooth without full reboot? It may be a nice work arround, until fix... Anything can be done from my side to help debug of this?
Someone said earlier that you have to enable it in options after which it wont dissapear. Little bug it seems.
Sent from my GT-I9300 using Tapatalk
RazOne
Senior Member
@forkbomb444 hello ! First of all Merry christmas to you! You made a great job with this rom. As in 5.1.1 there is low volume on speaker. If i modify the volume from boeffla sound it will became disorted. So any way to increase speaker (ringer volume) like on stock sammy 4.3 ? Thank you very much!
Sent from my GT-I9300 using XDA Premium 4 mobile app
Sent from my GT-I9300 using XDA Premium 4 mobile app
Okay, I've done a clean flash on 12/25 nightly build.
Flashlight is unable to use from toggle, and screen rotation works backward.
However, this might be the problem caused by my device being korean model, so I'm currently asking other Korean model users too.
Anyways, I'll attach logcats. The first one is when I toggled flashlight, and the second one is when I rotated the screen.
Flashlight is unable to use from toggle, and screen rotation works backward.
However, this might be the problem caused by my device being korean model, so I'm currently asking other Korean model users too.
Anyways, I'll attach logcats. The first one is when I toggled flashlight, and the second one is when I rotated the screen.
Live display automatic mode is woking nicely on 24th nightly. I can get rid of blue light filter finally. Kudos for the hard work @forkbomb444. This indeed feels a tad more snappier than cm12.1 with zero issues with camera.
Could you add a quick setting tile for live display like on cm12?
Edit - found it.
Could you add a quick setting tile for live display like on cm12?
Edit - found it.
Last edited:
Korean model? Do you mean SHW M440S ? Or other models except i9300 ?
If yes, all your reported problem is useless.
This ROM only for i9300 models.
LTE model(SHV-E210 variants).
Yeah, I guess so.... Well, I should just bear those problems until someone port this :crying:
(It's kinda surprising that without any modification this rom boots on SHW-M440S and SHV-E210 variants)
Even if its booted, but it wasn't designed for your device. So,,, stop complaining problem with another device except i9300. It will annoying people here.
PLEASE !!! STOP SPAMMING THIS THREAD !!!
Can send SMS from system APP nor Textra SMS from Google store. Any fix Please? I can only recieve SMS!
Edit: Solved! My SMSC Number was gone! Restored it and all is fine ? Sending and receiving ?
MMS not working but this issue is long talked about and it never get solved I guess. Anyway. DON'T need it?
Edit: Solved! My SMSC Number was gone! Restored it and all is fine ? Sending and receiving ?
MMS not working but this issue is long talked about and it never get solved I guess. Anyway. DON'T need it?
Last edited:
Tried cm13 for the first time today but realized that my 128gb sandisk cannot be formatted to fat32 so I cannot use it till exfat is supported
Sent from my GT-I9300 using Tapatalk
Sent from my GT-I9300 using Tapatalk
I flashed the latest nighlty from today and I don't have any problems with wifi
Mobile data fix
Hey guys I see there is a lot of speak over mobile data needs reboot to work so I put my whole experience using Mobile data and I'm sure it will work as I live in a country with bad signal and I always do tricks to turn my data on.
1. The first way is to turn airplane mode on and off once.
2. Next you can dial *#*#4636#*#* in your dialer app it will open the testing menu( only works in CM) then from there go to phone information and then you will find an arrow that can switch to wcdma only(usually when I have problems with data I switch to wcdma only).
3. If the above didn't work there likely to be a bug that I'm sometimes face. My phone will stuck on HSDPA and won't switch to HSPAP then you press the turn off radio button(it's almost the same as the airplane mode but worked better for me) and then turn it on again.
4. Check your APN and remove the proxy from the stock APNs and don't delete stock APNs cause I had a bug in alpha builds that with removing stock APNs the data won't turn on anyway. Not sure if already in nightlies or not.
5. Check your data plan!?! My friends sometimes come to me and say we can't turn the data on and then will figure out that their plan is over?!?
6. If non of above methods worked take logcats and report a bug in CM13 official thread.
Thank me if I helped you:good:
---------- Post added at 04:14 PM ---------- Previous post was at 04:10 PM ----------
@forkbomb444 I have a bug in builds from 23 to 25 that when I reboot on 2g mode and then reboot I will go on 3g mode but in setting it still shows the toggle on 2g and I have to switch the toggle to 3g and again switch to 2g to go back again to 2g mode or simply use testing mode. I'm not sure how to take logcats after a full reboot if they are needed tell me how to do so.
Can anyone try and confirm this?
Hey guys I see there is a lot of speak over mobile data needs reboot to work so I put my whole experience using Mobile data and I'm sure it will work as I live in a country with bad signal and I always do tricks to turn my data on.
1. The first way is to turn airplane mode on and off once.
2. Next you can dial *#*#4636#*#* in your dialer app it will open the testing menu( only works in CM) then from there go to phone information and then you will find an arrow that can switch to wcdma only(usually when I have problems with data I switch to wcdma only).
3. If the above didn't work there likely to be a bug that I'm sometimes face. My phone will stuck on HSDPA and won't switch to HSPAP then you press the turn off radio button(it's almost the same as the airplane mode but worked better for me) and then turn it on again.
4. Check your APN and remove the proxy from the stock APNs and don't delete stock APNs cause I had a bug in alpha builds that with removing stock APNs the data won't turn on anyway. Not sure if already in nightlies or not.
5. Check your data plan!?! My friends sometimes come to me and say we can't turn the data on and then will figure out that their plan is over?!?
6. If non of above methods worked take logcats and report a bug in CM13 official thread.
Thank me if I helped you:good:
---------- Post added at 04:14 PM ---------- Previous post was at 04:10 PM ----------
@forkbomb444 I have a bug in builds from 23 to 25 that when I reboot on 2g mode and then reboot I will go on 3g mode but in setting it still shows the toggle on 2g and I have to switch the toggle to 3g and again switch to 2g to go back again to 2g mode or simply use testing mode. I'm not sure how to take logcats after a full reboot if they are needed tell me how to do so.
Can anyone try and confirm this?
Last edited:
Did u experience the same wifi issue of mine, before the stability you are experiencing now?
Hi, all. First of all, Merry Christmas! Second, i am using CM 13.0.2015.12.17 Nightly version and cannot update anymore via CM updates menu (like i used to, before the CM 13). I can see the available updates, i can download them but when the phone reboots to install the updates it fails somehow (i can see the picture with the robot down for a sec only - no error messages) Ideas, please? Thank you kindly.
No, this is the First build i flashed and I don't hava any problems with wifi or mobil data
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
315
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:#include "std_disclaimer.h" /* * Your warranty is not void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review.
Wiki
Official CyanogenMod Wiki: https://wiki.cyanogenmod.org/w/i9300_Info
Installation
(NOTE: if you experience robotic voice during calls: see the FAQ for a fix)
First time CyanogenMod 14.1 installation on your Galaxy S III:
- Read the official Wiki page
- Flash a custom recovery via Heimdall or Odin
- Push GApps (arm) and the CM 14.1 zip to your device
- Boot into Recovery
- Perform factory reset
- Flash the CM 14.1 zip from SD card
- Flash GApps from SD card
- Reboot
- Update your recovery - CM Recovery will be done automatically, TWRP can be downloaded from here (NOTE: you need 3.0.2-2 to automatically install updates in CM14.1)
- Push the new CM 14.1 zip to your SD card
- Boot into Recovery
- Flash the CM 14.1 zip from SD card
- Flash the most recent GApps for 7.1 if you are upgrading from earlier android version
- Reboot
Downloads
- Lastest Nightly : http://get.cm/get/i9300-latest.zip
- Lastest Recovery (Nightly) : http://get.cm/get/i9300-latest-recovery.img (or TWRP)
- Lastest Snapshot : http://get.cm/get/i9300-snapshot.zip
- Lastest Recovery (Snapshot) : http://get.cm/get/i9300-snapshot-recovery.img (or TWRP)
- Unofficial Changelog
- Google Apps (arm): wiki.cyanogenmod.org/w/gapps
- All the builds: http://download.cyanogenmod.org/?device=i9300
Reporting bugs
- DO NOT report bugs if you're running a custom kernel
- DO NOT report bugs if you've modifies system files
- DO NOT report bugs if you've installed xposed and/or other mods
- Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
- If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
- If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Code:Phone Informations * CM version * Gapps version What you did: * Wipe data: y/n * Upgrade from previous official cm build: y/n * Restore with titanium backup: y/n You're using (if yes write which one) : * Task killer * Phone cleaner / Battery enhancer apps * Non-stock kernel * Modified kernel settings * Other mods Bug info: * Last version it worked on * Repro steps
F.A.Q.
(see next post)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Official CyanogenMod 14.1 Nightlies, ROM for the Samsung Galaxy S III I9300
Contributors
forkbomb444, Nameless, Haxynox, JustArchi
Source Code: https://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Version Information
Status: Nightly
Created 2015-12-17
Last Updated 2016-12-25116FAQ
Robotic voice during calls?
Make sure you're on the I9300XXUGMK6 modem. Instructions are here
Root?
CM ships with root, enable developer options and look in Settings -> Developer options -> root access
Google camera crashes?
Use Google Camera from the play store, not from gapps
There's a non-device related bug? - such as SystemUI crashes triggered by performing a certain action, stray settings entries, theme crashes, translation, etc.
I just work on the device support - not something I'll fix.
Something that worked in the last nightly doesn't work in the new nightly? - bootloops? Something new is broken? It can all go here.
Quick, to the bug tracker!
Some other issue?
You can't just say 'x is broken!' and expect me to magically find the bug and fix it.
Here's what I need:
- Steps to reproduce - I don't care if "it's simple". I want to know exactly what you were doing at the time of the bug. How'd it happen? Does it only happen on Tuesdays when watching a specific YouTube video? Include it *all*
- What happened - in what way is this *not* the expected behaviour? Don't just say "it didn't play/upload/whatever". Did the entire phone crash? Did it show an error? Did it just show an endless progress indicator? Again, I need specifics here.
- Logcat/last_kmsg - Include the whole thing please, and if your phone's been running for a while, give me a rough region of time when the issue happened. Use last_kmsg if your device reboots unexpectedly, otherwise use a logcat. (See below for info on how to get them)
How to logcat?
See here (read up to the end of the "logcat" section).
Upload it to a pastebin, include the link in your bug report.
or if you're on your phone and can't get to a computer:
How to get last_kmsg?
Copy /proc/last_kmsg and upload the file contents to a pastebin, include the link to that in your bug report7271Hi!
CM 14.1 is coming!
Upgrading to CM14.1
- Backup
- Update TWRP to version 3.0.2-2 - download it here
- Flash new CM
- Flash new GApps
You will need the updated TWRP to automatically take *any* updates (i.e. by using the "update" button in the ROM) starting from the next build - you can safely install the next update with your current TWRP.
If you don't update TWRP, you'll have to manually install all updates.69Hey,
I intend to keep working on i9300 for Lineage. There's not much else to say at the moment, but keep an eye on the website for more updates.
New posts
-
-
-
[ROM][UNOFFICIAL][matisse][millet] crDroid 7.39- Latest: thanhtran2401
