Trying to stay close on the current development with the recent release, I'm looking for a good query to search review.lineageos.org
Best one I can come up with is https://review.lineageos.org/q/Alioth+OR+SM8250
Anyone anything better?
Best one I can come up with is https://review.lineageos.org/q/Alioth+OR+SM8250
Anyone anything better?
I can not confirm.
Attachments
Last time I tried AudioFX on 19.1 in April it was working I recall... Anyway, on LOS20 it's working, but the application shall support external eq (e.g. YouTube music works, YouTube no)
Last 20.0 build is pulled due to issue with proximity sensor. Will be fixed from next build.
For existing users, you can flash attatched boot.img, extract from the zip file.
md5sum of zip 1da6d8bc20e15f3a01282141972b60d1
adb reboot-bootloader
fastboot flash boot lineage-20.0-2023052800-boot-alioth.img
fastboot reboot
For existing users, you can flash attatched boot.img, extract from the zip file.
md5sum of zip 1da6d8bc20e15f3a01282141972b60d1
adb reboot-bootloader
fastboot flash boot lineage-20.0-2023052800-boot-alioth.img
fastboot reboot
Last edited:
Thanks. I found it. It was in a different spot
Sorry for the stupid question. I need to reboot into fastboot and then type the command "fastboot flash boot_ab boot.img"?
providing that you have linux and you have installed fastboot, yes you will need to reboot into bootloader to flash, then once flashed type "fastboot reboot" to restart your phone. ,make sure you are in the same folder where you saved the boot image, or else you need to point to the location of the file..
there are many how to flash boot image just use the search function.
Last edited:
For all those who want/have to flash the Boot.img from Windows ;-) here are a few instructions.
Boot into fastboot mode.
Open cmd as admin.
Go to the folder in which adb is located and where the boot.img file is best located.
Enter the following command:
"fastboot flash boot boot.img"
When it's done copying and writing, type: "fastboot reboot"
After that, your proximity sensor will work again. thanks to althafvly
Boot into fastboot mode.
Open cmd as admin.
Go to the folder in which adb is located and where the boot.img file is best located.
Enter the following command:
"fastboot flash boot boot.img"
When it's done copying and writing, type: "fastboot reboot"
After that, your proximity sensor will work again. thanks to althafvly
My battery was now at 8% and then charged. Took about 2 hours with an interruption of about 15 minutes.
I've made it through the 168 hours of hostage by Xiaomi, does someone have a mirror of the LOS20 files that were online briefly? I'm anxious to finally start experimenting with this phone...
Any reason these 20.0 builds take ± 3 times the amount of time?
Top Liked Posts
-
There are no posts matching your filters.
-
2
Have you tried to change preferred network type in settings? This happened to me after the instal, the preferred netwotk type was set to: LTE, TD-SCDMA , CDMA,... I changed it to : WORLD and the 5G appeared immediately.22
Yes, you're right. My phone is in Spanish, i have "Mundial" as an option in preferred network type, so I thought that World would be the english word for that.1If anyone happens to be on Public Mobile in Canada and have trouble sending MMS messages, the built in APN settings in the rom are incorrect/outdated and seem to have proliferated all over the internet, so most roms have the wrong ones included.
These are correct:
- MMS proxy: mmscproxy.mobility.ca
- MMS port: 8799
- MMS proxy: 74.49.0.18
- MMS port: 80
I should have run into that issue long before now, but I rarely use MMS -- and neither should you.
Once in a while you'll find someone who doesn't have RCS turned on.
Edit: Yeah they changed the IP again -- that URL used to point to that IP but now it points to their other MMS server (209.202.119.4). So the rom should have the IP address swapped out for the URL so it can be dynamic. Port doesn't really matter, either 80 or 8799 should work, but they seem to recommend the latter on Telus/Koodo/PM support sites.1Hello there,
I flash my phone to this firmware POCO F3 EEA - V14.0.7.0.TKHEUXM
Then tried to "fastboot boot twrp-3.7.0_12-0-alioth.img" and it rebooted to the TWRP
But it failed to mount the partitions:
'/system_root' (Invalid argument)
'/vendor' (Invalid argument)
Could anyone give me a tip?
EDIT: I have missed this part:
fastboot flash boot boot.img -
57
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
- Kernel source code: LineageOS/android_kernel_xiaomi_sm8250
- Camera (and flashlight)
- Mobile Data (4G/5G)
- WiFi
- Bluetooth
- Telephony (VoLTE/VoWifi)
- Audio (Record and Playback)
- Video Playback
- Sensors
- GPS
- NFC (Except aliothin)
- Nothing (?)
Downloads:
Wiki:
Note:
- Must follow installation wiki for this device.
- GApps can only be flashed on clean installs.
- Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
- No custom kernels are supported in this thread. Only stock kernel and official builds will be supported.
- Flashing LineageOS through custom recovery is not supported and not advised.
- For recovery you must flash vendor_boot.img and boot.img
- DO NOT report bugs if you're running a custom kernel, recovery or Xposed or Magisk mods.
- Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.).
- Report bugs here: https://wiki.lineageos.org/how-to/bugreport#reporting-a-bug
Credits & collaborations:
All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Support:
XDA is preferred for main discussion. But if you need any unofficial support then check this group. We strongly discourage direct contact with any devs through social media.
Credits :
@SebaUbuntu
@Sahil_Sonar
DONATIONS : Paypal20SafetyNet
By default LineageOS doesn't pass SafetyNet, why?, Check here https://lineageos.org/Safetynet
You can use this unofficial method to pass SafetyNet (Not for rooted users): ih8sn15LineageOS 19.1 official build is out
Make sure follow steps before upgrading to lineage-19.1
- Follow this fresh install https://wiki.lineageos.org/devices/alioth/install
- Follow this for upgrade https://wiki.lineageos.org/devices/alioth/upgrade
- Install Android 12 Gapps after installing rom (if you use)
- Update firmware to required firmware version MIUI 13.x.x builds (Based on Android 12).
V13.0.5.0.SKHCNXM 12.0 China
V13.0.4.0.SKHEUXM 12.0 Europe
V13.0.4.0.SKHINXM 12.0 India
V13.0.2.0.SKHMIXM 12.0 Global15#ih8sn
- What does this do?
- Spoof build as a user build (lineage builds are userdebug).
- Spoof bootloader unlock status.
- Spoof device as mi 8
Download from attachments: ih8sn-aarch64.zip
Note:
- Spoofing does not stays in ota updates.
- This method is only for non-rooted users.
- Use ih8sn-uninstaller.zip to uninstall.
